summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-20iwlwifi: make MVM and DVM depend on MAC80211Luca Coelho
It's not the iwlwifi module that depends on mac80211, but iwlmvm and iwldvm. To reflect this better, make MVM and DVM Kconfig options depend on MAC80211 instead. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20iwlwifi: mvm: fix setting HE ppe FW configNaftali Goldstein
The FW expects to get the ppe value for each NSS-BW pair in the same format as in the he phy capabilities IE, which means that a value of 0 implies ppe should be used for BPSK (mcs 0). If there are no PPE thresholds in the IE, or if for some NSS-RU pair there's no threshold set for it (this could happen because it's a variable-sized field), it means no PPE should not be used for that pair, so the value sent to FW should be 7 which corresponds to "none". Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax") Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20iwlwifi: mvm: cleanup iwl_mvm_tx_skb_non_staSara Sharon
Make the coupling of station id and queue id clear. Group code together. Remove outdated comment. Never use an undefined hw queue as given from mac80211. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20iwlwifi: mvm: remove pointless NULL assignmentSara Sharon
Assigning mvmsta to be NULL when we are about to exit the function is pointless. Remove it. Move the variable declaration to the scope it is used. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20iwlwifi: mvm: remove dead codeSara Sharon
In iwl_mvm_tx_skb_non_sta(), in case of managed interface, the AP station was supposed to be used for multicast frames instead of the auxiliary station to avoid frames possibly sent to an absent P2P GO. However, when moving to DQA mode, this was broken as no valid queue was assigned. This is fixed by a recent patch that directs all non-offchannel traffic to ap station earlier in the TX path. However, the broken, and now dead code, remained. Remove it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20iwlwifi: pcie: use iwl_tx_cmd_gen2 and not iwl_tx_cmdSara Sharon
When building AMSDU for gen2, code uses iwl_tx_cmd. The only updated field is len, which is in the same location, so it is not a bug. However, it is a bit confusing and error prone, so change it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20ipw2x00: cleanup dead codeYueHaibing
Fix smatch warning: drivers/net/wireless/intel/ipw2x00/ipw2100.c:5606 shim__set_security() warn: always true condition '(sec->active_key <= 3) => (0-3 <= 3)' drivers/net/wireless/intel/ipw2x00/ipw2200.c:10725 shim__set_security() warn: always true condition '(sec->active_key <= 3) => (0-3 <= 3)' Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()Jia-Ju Bai
The function cw1200_bss_info_changed() and cw1200_hw_scan() can be concurrently executed. The two functions both access a possible shared variable "frame.skb". This shared variable is freed by dev_kfree_skb() in cw1200_upload_beacon(), which is called by cw1200_bss_info_changed(). The free operation is protected by a mutex lock "priv->conf_mutex" in cw1200_bss_info_changed(). In cw1200_hw_scan(), this shared variable is accessed without the protection of the mutex lock "priv->conf_mutex". Thus, concurrency use-after-free bugs may occur. To fix these bugs, the original calls to mutex_lock(&priv->conf_mutex) and mutex_unlock(&priv->conf_mutex) are moved to the places, which can protect the accesses to the shared variable. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20brcmfmac: Fix access point modeStefan Wahren
Since commit 1204aa17f3b4 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag") the Raspberry Pi 3 A+ (BCM43455) isn't able to operate in AP mode with hostapd (device_ap_sme=1 use_monitor=0): brcmfmac: brcmf_cfg80211_stop_ap: setting AP mode failed -52 So add the missing mgmt_stypes for AP mode to fix this. Fixes: 1204aa17f3b4 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag") Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20brcmfmac: fix roamoff=1 modparamStijn Tintel
When the update_connect_param callback is set, nl80211 expects the flag WIPHY_FLAG_SUPPORTS_FW_ROAM to be set as well. However, this flag is only set when modparam roamoff=0, while the callback is set unconditionally. Since commit 7f9a3e150ec7 this causes a warning in wiphy_register, which breaks brcmfmac. Disable the update_connect_param callback when roamoff=0 to fix this. Fixes: 7f9a3e150ec7 ("nl80211: Update ERP info using NL80211_CMD_UPDATE_CONNECT_PARAMS") Cc: Stable <stable@vger.kernel.org> # 4.19+ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20cw1200: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-19rds: Fix warning.David S. Miller
>> net/rds/send.c:1109:42: warning: Using plain integer as NULL pointer Fixes: ea010070d0a7 ("net/rds: fix warn in rds_message_alloc_sgs") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fix from Michael Tsirkin: "A last-minute fix for a test build" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: fix test build after uio.h change
2018-12-19Merge tag 'nfs-for-4.20-6' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Fix TCP socket disconnection races by ensuring we always call xprt_disconnect_done() after releasing the socket. - Fix a race when clearing both XPRT_CONNECTING and XPRT_LOCKED - Remove xprt_connect_status() so it does not mask errors that should be handled by call_connect_status() * tag 'nfs-for-4.20-6' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Remove xprt_connect_status() SUNRPC: Fix a race with XPRT_CONNECTING SUNRPC: Fix disconnection races
2018-12-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: - One nasty use-after-free bugfix, from this merge window however - A less nasty use-after-free that can only zero some words at the beginning of the page, and hence is not really exploitable - A NULL pointer dereference - A dummy implementation of an AMD chicken bit MSR that Windows uses for some unknown reason * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: Add AMD's EX_CFG to the list of ignored MSRs KVM: X86: Fix NULL deref in vcpu_scan_ioapic KVM: Fix UAF in nested posted interrupt processing KVM: fix unregistering coalesced mmio zone from wrong bus
2018-12-19Merge tag 'dma-mapping-4.20-4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fix from Christoph Hellwig: "Fix a regression in dma-direct that didn't take account the magic AMD memory encryption mask in the DMA address" * tag 'dma-mapping-4.20-4' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: do not include SME mask in the DMA supported check
2018-12-19neighbor: NTF_PROXY is a valid ndm_flag for a dump requestDavid Ahern
When dumping proxy entries the dump request has NTF_PROXY set in ndm_flags. strict mode checking needs to be updated to allow this flag. Fixes: 51183d233b5a ("net/neighbor: Update neigh_dump_info for strict data checking") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19neighbor: Initialize protocol when new pneigh_entry are createdDavid Ahern
pneigh_lookup uses kmalloc versus kzalloc when new entries are allocated. Given that the newly added protocol field needs to be initialized. Fixes: df9b0e30d44c ("neighbor: Add protocol attribute") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20bpf: sparc64: Enable sparc64 jit to provide bpf_line_infoMartin KaFai Lau
This patch enables sparc64's bpf_int_jit_compile() to provide bpf_line_info by calling bpf_prog_fill_jited_linfo(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-19selftests: net: refactor reuseport_addr_any testPeter Oskolkov
This patch refactors reuseport_add_any selftest a bit: - makes it more modular (eliminates several copy/pasted blocks); - skips DCCP tests if DCCP is not supported V2: added "Signed-off-by" tag. Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: dsa: mv88e6xxx: Add missing watchdog ops for 6320 familyAndrew Lunn
The 6320 family of switches uses the same watchdog registers as the 6390. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: mvpp2: fix the phylink mode validationAntoine Tenart
The mvpp2_phylink_validate() sets all modes that are supported by a given PPv2 port. An mistake made the 10000baseT_Full mode being advertised in some cases when a port wasn't configured to perform at 10G. This patch fixes this. Fixes: d97c9f4ab000 ("net: mvpp2: 1000baseX support") Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/sched: cls_flower: Remove old entries from rhashtableRoi Dayan
When replacing a rule we add the new rule to the rhashtable but only remove the old if not in skip_sw. This commit fix this and remove the old rule anyway. Fixes: 35cc3cefc4de ("net/sched: cls_flower: Reject duplicated rules also under skip_sw") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/tls: allocate tls context using GFP_ATOMICGanesh Goudar
create_ctx can be called from atomic context, hence use GFP_ATOMIC instead of GFP_KERNEL. [ 395.962599] BUG: sleeping function called from invalid context at mm/slab.h:421 [ 395.979896] in_atomic(): 1, irqs_disabled(): 0, pid: 16254, name: openssl [ 395.996564] 2 locks held by openssl/16254: [ 396.010492] #0: 00000000347acb52 (sk_lock-AF_INET){+.+.}, at: do_tcp_setsockopt.isra.44+0x13b/0x9a0 [ 396.029838] #1: 000000006c9552b5 (device_spinlock){+...}, at: tls_init+0x1d/0x280 [ 396.047675] CPU: 5 PID: 16254 Comm: openssl Tainted: G O 4.20.0-rc6+ #25 [ 396.066019] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0c 09/25/2017 [ 396.083537] Call Trace: [ 396.096265] dump_stack+0x5e/0x8b [ 396.109876] ___might_sleep+0x216/0x250 [ 396.123940] kmem_cache_alloc_trace+0x1b0/0x240 [ 396.138800] create_ctx+0x1f/0x60 [ 396.152504] tls_init+0xbd/0x280 [ 396.166135] tcp_set_ulp+0x191/0x2d0 [ 396.180035] ? tcp_set_ulp+0x2c/0x2d0 [ 396.193960] do_tcp_setsockopt.isra.44+0x148/0x9a0 [ 396.209013] __sys_setsockopt+0x7c/0xe0 [ 396.223054] __x64_sys_setsockopt+0x20/0x30 [ 396.237378] do_syscall_64+0x4a/0x180 [ 396.251200] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: df9d4a178022 ("net/tls: sleeping function from invalid context") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19Merge branch 'mt2712'David S. Miller
Biao Huang says: ==================== add ethernet binding and modify ethernet driver for mt2712 changes in v3: resend this series base on the latest net-next tree. changes in v2 as comments from Sean: 1. fix typo. 2. use capital letters for RMII/MII/RGMII in driver and bindings. v1: This new series is the result of discussion in: http://lkml.org/lkml/2018/12/13/1007 http://lkml.org/lkml/2018/12/14/53 1. ethernet binding file move to this series. 2. remove fine tune property in device tree 3. remove fine tune flow in ethernet driver 4. set rgmii timing according to the value in device tree, and don't care whether phy insert internal delay or not. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net-next: stmmac: dwmac-mediatek: remove fine-tune propertyBiao Huang
1. remove fine-tune property and related setting to simplify the timing adjustment flow. 2. set timing value according to the value from device tree, and will not care whether PHY insert internal delay. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net-next: dt-binding: dwmac-mediatek: remove fine-tune propertyBiao Huang
remove fine-tune property in device tree, modify the corresponding description in dt-binding. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19iptunnel: make TUNNEL_FLAGS available in uapiwenxu
ip l add dev tun type gretap external ip r a 10.0.0.1 encap ip dst 192.168.152.171 id 1000 dev gretap For gretap Key example when the command set the id but don't set the TUNNEL_KEY flags. There is no key field in the send packet In the lwtunnel situation, some TUNNEL_FLAGS should can be set by userspace Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19gro_cell: add napi_disable in gro_cells_destroyLorenzo Bianconi
Add napi_disable routine in gro_cells_destroy since starting from commit c42858eaf492 ("gro_cells: remove spinlock protecting receive queues") gro_cell_poll and gro_cells_destroy can run concurrently on napi_skbs list producing a kernel Oops if the tunnel interface is removed while gro_cell_poll is running. The following Oops has been triggered removing a vxlan device while the interface is receiving traffic [ 5628.948853] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 5628.949981] PGD 0 P4D 0 [ 5628.950308] Oops: 0002 [#1] SMP PTI [ 5628.950748] CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.20.0-rc6+ #41 [ 5628.952940] RIP: 0010:gro_cell_poll+0x49/0x80 [ 5628.955615] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202 [ 5628.956250] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000 [ 5628.957102] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150 [ 5628.957940] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000 [ 5628.958803] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040 [ 5628.959661] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040 [ 5628.960682] FS: 0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000 [ 5628.961616] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5628.962359] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0 [ 5628.963188] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5628.964034] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5628.964871] Call Trace: [ 5628.965179] net_rx_action+0xf0/0x380 [ 5628.965637] __do_softirq+0xc7/0x431 [ 5628.966510] run_ksoftirqd+0x24/0x30 [ 5628.966957] smpboot_thread_fn+0xc5/0x160 [ 5628.967436] kthread+0x113/0x130 [ 5628.968283] ret_from_fork+0x3a/0x50 [ 5628.968721] Modules linked in: [ 5628.969099] CR2: 0000000000000008 [ 5628.969510] ---[ end trace 9d9dedc7181661fe ]--- [ 5628.970073] RIP: 0010:gro_cell_poll+0x49/0x80 [ 5628.972965] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202 [ 5628.973611] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000 [ 5628.974504] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150 [ 5628.975462] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000 [ 5628.976413] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040 [ 5628.977375] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040 [ 5628.978296] FS: 0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000 [ 5628.979327] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5628.980044] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0 [ 5628.980929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5628.981736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5628.982409] Kernel panic - not syncing: Fatal exception in interrupt [ 5628.983307] Kernel Offset: disabled Fixes: c42858eaf492 ("gro_cells: remove spinlock protecting receive queues") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19lan743x: Remove MAC Reset from initializationBryan Whitehead
The MAC Reset was noticed to erase important EEPROM settings. It is also unnecessary since a chip wide reset was done earlier in initialization, and that reset preserves EEPROM settings. There for this patch removes the unnecessary MAC specific reset. Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19Merge branch 'line_info-check-for-ld_imm64'Alexei Starovoitov
Martin KaFai Lau says: ==================== This series ensures the line_info (passed by the userspace during bpf_prog_load) cannot have its line_info.insn_off pointing to a zero bpf insn code. F.e. a broken userspace tool might generate a line_info.insn_off that points to the second 8 bytes of a BPF_LD_IMM64. The first patch is the kernel change. The second patch is a new test case. ==================== Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-19bpf: Add BPF_LD_IMM64 to the line_info testMartin KaFai Lau
This patch adds a BPF_LD_IMM64 case to the line_info test to ensure the kernel rejects linfo_info.insn_off pointing to the 2nd 8 bytes of the BPF_LD_IMM64. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-19bpf: Ensure line_info.insn_off cannot point to insn with zero codeMartin KaFai Lau
This patch rejects a line_info if the bpf insn code referred by line_info.insn_off is 0. F.e. a broken userspace tool might generate a line_info.insn_off that points to the second 8 bytes of a BPF_LD_IMM64. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-19virtio: fix test build after uio.h changeMichael S. Tsirkin
Fixes: d38499530e5 ("fs: decouple READ and WRITE from the block layer ops") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19Merge tag 'mlx5-fixes-2018-12-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2018-12-19 Some fixes for the mlx5 driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19Merge branch 'neigh-get-support'David S. Miller
Roopa Prabhu says: ==================== neigh get support This series adds support for neigh get similar to route and recently added fdb get. v2: fix key len check. and some other fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19selftests: rtnetlink.sh: add testcase for neigh getRoopa Prabhu
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19neighbour: register rtnl doit handlerRoopa Prabhu
this patch registers neigh doit handler. The doit handler returns a neigh entry given dst and dev. This is similar to route and fdb doit (get) handlers. Also moves nda_policy declaration from rtnetlink.c to neighbour.c Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/mlx5e: Remove the false indication of software timestamping supportAlaa Hleihel
mlx5 driver falsely advertises support of software timestamping. Fix it by removing the false indication. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-19net/mlx5: Typo fix in del_sw_hw_ruleYuval Avnery
Expression terminated with "," instead of ";", resulted in set_fte getting bad value for modify_enable_mask field. Fixes: bd5251dbf156 ("net/mlx5_core: Introduce flow steering destination of type counter") Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-19net/mlx5e: RX, Fix wrong early return in receive queue pollTariq Toukan
When the completion queue of the RQ is empty, do not immediately return. If left-over decompressed CQEs (from the previous cycle) were processed, need to go to the finalization part of the poll function. Bug exists only when CQE compression is turned ON. This solves the following issue: mlx5_core 0000:82:00.1: mlx5_eq_int:544:(pid 0): CQ error on CQN 0xc08, syndrome 0x1 mlx5_core 0000:82:00.1 p4p2: mlx5e_cq_error_event: cqn=0x000c08 event=0x04 Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-19tools: bpftool: do not force gcc as CCIvan Babrou
This allows transparent cross-compilation with CROSS_COMPILE by relying on 7ed1c1901fe5 ("tools: fix cross-compile var clobbering"). Signed-off-by: Ivan Babrou <ivan@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-19xsk: simplify AF_XDP socket teardownBjörn Töpel
Prior this commit, when the struct socket object was being released, the UMEM did not have its reference count decreased. Instead, this was done in the struct sock sk_destruct function. There is no reason to keep the UMEM reference around when the socket is being orphaned, so in this patch the xdp_put_mem is called in the xsk_release function. This results in that the xsk_destruct function can be removed! Note that, it still holds that a struct xsk_sock reference might still linger in the XSKMAP after the UMEM is released, e.g. if a user does not clear the XSKMAP prior to closing the process. This sock will be in a "released" zombie like state, until the XSKMAP is removed. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-19Merge branch 'mlxsw-Make-driver-more-robust'David S. Miller
Ido Schimmel says: ==================== mlxsw: Make driver more robust In recent months we fixed several bugs in the driver that could have been avoided by re-evaluating some of the involved code paths and by introducing relevant and comprehensive test cases. This patchset tries to do that by introducing a set of small and mostly non-functional changes in addition to a new test. I have further improvements in mind, but they can be done in a different set. Patch #1 makes sure we correctly sanitize upper devices of a VLAN interface. Patch #2 removes an unexpected behavior from the driver, in which routes configured on a VLAN interface will cease being offloaded after certain operations. Patch #3 is a small cleanup. Patch #4 simplifies the driver by removing reference counting from VLAN entries configured on a port. Patches #5-#6 simplify linking/unlinking from a bridge, especially when LAG and VLAN devices are involved. They make both operations symmetric even when ports are unlinked from a bridged LAG device. Patch #7-#9 make router interface (RIF) deletion more robust by removing reliance on device chain to indicate whether a NETDEV_DOWN event in the inet{,6}addr notification chains should be processed. This is due to the fact that IP addresses can be flushed from a netdev after it was unlinked from its lower device. Patch #10 adds a new test to for valid and invalid configurations over mlxsw ports. Some of the test cases are derived from recent fixes. I expect that more test cases will be added over time. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19selftests: mlxsw: Add rtnetlink testsIdo Schimmel
Add a new test that is focused on rtnetlink configuration. Its purpose is to test valid and invalid (as deemed by mlxsw) configurations and make sure that they succeed / fail without producing a trace. Some of the test cases are derived from recent fixes in order to make sure that the fixed bugs are not introduced again. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19mlxsw: spectrum_router: Hold a reference on RIF's netdevIdo Schimmel
Previous patches tried to make RIF deletion more robust and avoid use-after-free situations. As another precaution, hold a reference on a RIF's netdev and release it when the RIF is deleted. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19mlxsw: spectrum_router: Make RIF deletion more robustIdo Schimmel
In the past we had multiple instances where RIFs were not properly deleted. One of the reasons for leaking a RIF was that at the time when IP addresses were flushed from the respective netdev (prompting the destruction of the RIF), the netdev was no longer a mlxsw upper. This caused the inet{,6}addr notification blocks to ignore the NETDEV_DOWN event and leak the RIF. Instead of checking whether the netdev is our upper when an IP address is removed, we can instead check if the netdev has a RIF configured. To look up a RIF we need to access mlxsw private data, so the patch stores the notification blocks inside a mlxsw struct. This then allows us to use container_of() and extract the required private data. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19mlxsw: spectrum_router: Propagate 'struct mlxsw_sp' furtherIdo Schimmel
Next patch is going to make RIF deletion more robust by removing reliance on fragile mlxsw_sp_lower_get(). This is because a netdev is not necessarily our upper anymore when its IP addresses are flushed. The inet{,6}addr notification blocks are going to resolve 'struct mlxsw_sp' using container_of(), but the functions they call still use mlxsw_sp_lower_get(). As a preparation for the next patch, propagate 'struct mlxsw_sp' down to the functions called from the notification blocks and remove reliance on mlxsw_sp_lower_get(). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19mlxsw: spectrum: Properly cleanup LAG uppers when removing port from LAGIdo Schimmel
When a LAG device or a VLAN device on top of it is enslaved to a bridge, the driver propagates the CHANGEUPPER event to the LAG's slaves. This causes each physical port to increase the reference count of the internal representation of the bridge port by calling mlxsw_sp_port_bridge_join(). However, when a port is removed from a LAG, the corresponding leave() function is not called and the reference count is not decremented. This leads to ugly hacks such as mlxsw_sp_bridge_port_should_destroy() that try to understand if the bridge port should be destroyed even when its reference count is not 0. Instead, make sure that when a port is unlinked from a LAG it would see the same events as if the LAG (or its uppers) were unlinked from a bridge. The above is achieved by walking the LAG's uppers when a port is unlinked and calling mlxsw_sp_port_bridge_leave() for each upper that is enslaved to a bridge. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19mlxsw: spectrum: Remove reference count from VLAN entriesIdo Schimmel
Commit b3529af6bb0d ("spectrum: Reference count VLAN entries") started reference counting port-VLAN entries in a similar fashion to the 8021q driver. However, this is not actually needed and only complicates things. Instead, the driver should forbid the creation of a VLAN on a port if this VLAN already exists. This would also solve the issue fixed by the mentioned commit. Therefore, remove the get()/put() API and use create()/destroy() instead. One place that needs special attention is VLAN addition in a VLAN-aware bridge via switchdev operations. In case the VLAN flags (e.g., 'pvid') are toggled, then the VLAN entry already exists. To prevent the driver from wrongly returning EEXIST, the driver is changed to check in the prepare phase whether the entry already exists and only returns an error in case it is not associated with the correct bridge port. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-29 22:28:34 +0000