summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-04drm/fb-helper: Fix typo in parameter descriptionWei Yongjun
Fix typo in parameter description. Fixes: 4be9bd10e22d ("drm/fb_helper: Allow leaking fbdev smem_start") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1543905135-35293-1-git-send-email-weiyongjun1@huawei.com
2018-12-03libata: whitelist all SAMSUNG MZ7KM* solid-state disksJuha-Matti Tilli
These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted. Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-03Input: omap-keypad - fix keyboard debounce configurationTony Lindgren
I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: xpad - quirk all PDP Xbox One gamepadsCameron Gutman
Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: synaptics - enable SMBus for HP 15-ay000Teika Kazura
SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000 series, This device has been reported in these messages in the "linux-input" mailing list: * https://marc.info/?l=linux-input&m=152016683003369&w=2 * https://www.spinics.net/lists/linux-input/msg52525.html Reported-by: Nitesh Debnath <niteshkd1999@gmail.com> Reported-by: Teika Kazura <teika@gmx.com> Signed-off-by: Teika Kazura <teika@gmx.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: synaptics - add PNP ID for ThinkPad P50 to SMBusLyude Paul
Noticed the other day the trackpoint felt different on my P50, then realized it was because rmi4 wasn't loading for this machine automatically. Suspend/resume, hibernate, and everything else seem to work perfectly fine on here. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARRNoah Westervelt
Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by: Noah Westervelt <nwestervelt@outlook.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: elan_i2c - add support for ELAN0621 touchpadAdam Wong
Added the ability to detect the ELAN0621 touchpad found in some Lenovo laptops. Signed-off-by: Adam Wong <adam@adamwong.me> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Merge tag 'media/v4.20-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - Revert a dt-bindings patch whose driver didn't make for 4.20 - fix a kernel oops at vicodec driver - fix a frame overflow at gspca with was causing regressions on some cameras, making them to not work - use the proper type for wait_queue head - make media request API compatible with 32-bit userspace on 64-bit kernel - fix a regression on Kernel 4.19 at dvb-pll - don't use SPDX headers yet for GFDL * tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mediactl docs: Fix licensing message media: dvb-pll: don't re-validate tuner frequencies media: dvb-pll: fix tuner frequency ranges media: Revert "media: dt-bindings: Document the Rockchip VPU bindings" media: gspca: fix frame overflow error media: vicodec: fix memchr() kernel oops media: cedrus: add action item to the TODO media: media-request: Add compat ioctl media: Use wait_queue_head_t for media_request
2018-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull IDE fixes from David Miller: "A missing of_node_put() and a small cleanup" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: Change to use DEFINE_SHOW_ATTRIBUTE macro ide: pmac: add of_node_put()
2018-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: 1) Some implicit switch fallthrough fixes from Stephen Rothwell. 2) Missing of_node_put() in various sparc drivers from Yangtao Li. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: drivers/tty: add missing of_node_put() drivers/sbus/char: add of_node_put() sbus: char: add of_node_put() sparc32: supress another implicit-fallthrough warning sparc32: suppress an implicit-fallthrough warning sparc: suppress the implicit-fallthrough warning arch/sparc: Use kzalloc_node
2018-12-03drm/amd/powerplay: support SoftMin/Max setting for some specific DPMEvan Quan
For some case, no need to force SoftMin/Max settings for all DPMs. It's OK to force on some specific DPM only. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-03drm/amd/powerplay: issue pre-display settings for display change eventEvan Quan
For display config change event only, pre-display config settings are needed. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-03drm/amd/powerplay: support new pptable upload on Vega20Evan Quan
New pptable upload through sysfs interface is supported. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-03drm/amdgpu/gmc8: always load MC firmware in the driverAlex Deucher
Some power features rely on the driver loaded version so always load the MC firmware from the driver even if the vbios loaded a version already. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-03drm/amdgpu/gmc8: update MC firmware for polarisAlex Deucher
Some variants require different MC firmware images. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-03ALSA: usb-audio: Fix UAF decrement if card has no live interfaces in card.cHui Peng
If a USB sound card reports 0 interfaces, an error condition is triggered and the function usb_audio_probe errors out. In the error path, there was a use-after-free vulnerability where the memory object of the card was first freed, followed by a decrement of the number of active chips. Moving the decrement above the atomic_dec fixes the UAF. [ The original problem was introduced in 3.1 kernel, while it was developed in a different form. The Fixes tag below indicates the original commit but it doesn't mean that the patch is applicable cleanly. -- tiwai ] Fixes: 362e4e49abe5 ("ALSA: usb-audio - clear chip->probing on error exit") Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: Hui Peng <benquike@gmail.com> Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-03drm/amdgpu: update mc firmware image for polaris12 variantsJunwei Zhang
Some new variants require updated firmware. Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-03drm/msm: Fix error return checkingWen Yang
The error checks on ret for a negative error return always fails because the return value of iommu_map_sg() is unsigned and can never be negative. Detected with Coccinelle: drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression compared with zero: ret < 0 Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> CC: Rob Clark <robdclark@gmail.com> CC: David Airlie <airlied@linux.ie> CC: Julia Lawall <julia.lawall@lip6.fr> CC: linux-arm-msm@vger.kernel.org CC: dri-devel@lists.freedesktop.org CC: freedreno@lists.freedesktop.org CC: linux-kernel@vger.kernel.org Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03drm/msm/dpu: Ignore alpha for XBGR8888 formatJayant Shekhar
Alpha enable in the pixel format will help in selecting the blend rule. By keeping alpha enable to true we are allowing foreground alpha to blend with the layer. If alpha is don't care, then we should not allow pixel alpha to be part of blend equation. Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03drm/msm: dpu: Fix "WARNING: invalid free of devm_ allocated data"YueHaibing
'dpu_enc' is a member of 'drm_enc' And 'drm_enc' got allocated with devm_kzalloc in dpu_encoder_init. This gives this error message: ./drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:459:1-6: WARNING: invalid free of devm_ allocated data Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03drm/msm/hdmi: Drop pointless static qualifier in msm_hdmi_bind()YueHaibing
There is no need to have the 'struct hdmi_platform_config *hdmi_cfg' variable static since new value always be assigned before use it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03drm/msm: Move fence put to where failure occursRobert Foss
If dma_fence_wait fails to wait for a supplied in-fence in msm_ioctl_gem_submit, make sure we release that in-fence. Also remove this dma_fence_put() from the 'out' label. Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03drm/msm: dpu: Don't set legacy plane->crtc pointerSean Paul
It causes a WARN in drm_atomic_get_plane_state(), and is not used by atomic (or dpu). Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-12-03drm/msm/gpu: Don't map command buffers with nr_relocs equal to 0Jordan Crouse
If a command buffer doesn't have any relocs assigned to it there then is no need to map it in the kernel address space. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03drm/msm/hdmi: Enable HPD after HDMI IRQ is set upTodor Tomov
SoCs that contain MDP5 have a top level wrapper called MDSS that manages locks, power and irq for the sub-blocks within it. Irq for HDMI is also routed through the MDSS. Shortly after the Hot Plug Detection (HPD) is enabled in HDMI, HDMI interrupts are recieved by the MDSS interrupt handler. However at this moment the HDMI irq is still not mapped to the MDSS irq domain so the HDMI irq handler cannot be called to process the interrupts. This leads to a flood of HDMI interrupts on CPU 0. If we are lucky to have the HDMI initialization running on a different CPU, it will eventually map the HDMI irq to MDSS irq domain, the next HDMI interrupt will be handled by the HDMI irq handler, the interrupt flood will stop and we will recover. If the HDMI initialization is running on CPU 0, then it cannot complete and there is nothing to stop the interrupt flood on CPU 0. The system is stuck. Fix this by moving the HPD enablement after the HDMI irq is mapped to the MDSS irq domain. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03drm/msm: validate display and event threadsJeykumar Sankaran
While creating display and event threads per crtc, validate them before setting their priorities. changes in v2: - use dev_warn (Abhinav Kumar) changes in v3: - fix compilation error changes in v4: - Remove Change-Id (Sean Paul) - Keep logging within 80 char limit (Sean Paul) Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03drm/omap: fix incorrect union usageSebastian Reichel
The DSI encoder sets dssdev->ops->dsi.set_config, which is stored at the same offset as dssdev->ops->hdmi.set_hdmi_mode. The code in omap_encoder only checks if dssdev->ops->hdmi.set_hdmi_mode is NULL. Due to the way union works, it won't be NULL if dsi.set_config is set. This means dsi_set_config will be called with config=hdmi_mode=false=NULL parameter resulting in a NULL dereference. Also the dereference happens while console is locked, so kernel hangs without any debug output without "fb.lockless_register_fb=1" parameter. This restructures the code, so that the HDMI mode is only configured for HDMI output types. Fixes: 83910ad3f51fb ("drm/omap: Move most omap_dss_driver operations to omap_dss_device_ops") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Tony Lindgren <tony@atomide.com> [tomi.valkeinen@ti.com: dropped the safeguard] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-5-sebastian.reichel@collabora.com
2018-12-03drm/omap: populate DSI platform bus earlierSebastian Reichel
After the changes from 4.20 the DSI encoder tries to find the attached panel before populating the DSI bus. If the panel is not found -EPROBE_DEFER is returned, so the DSI bus is never populated and the panel never added. Fix this by populating the DSI bus before searching for the video sink in dsi_init_output(). Fixes: 27d624527d992 ("drm/omap: dss: Acquire next dssdev at probe time") Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-3-sebastian.reichel@collabora.com
2018-12-03drm/omap: fix bus_flags for panel-dpiTomi Valkeinen
panel-dpi used to convey the bus-flags via the videomode, but recent changes changed the use of videomode to DRM's drm_display_mode which does not contain bus-flags. This broke panel-dpi, which didn't explicitly store the bus-flags into dssdev->bus_flags. Fix this by setting dssdev->bus_flags. Also change the bus_flags type to u32, as that is the type used in the DRM framework, and we would get a warning with drm_bus_flags_from_videomode() otherwise. Fixes: 3fbda31e814868d8477ddf52d74b7b8f596578e8 ("drm/omap: Split mode fixup and mode set from encoder enable") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181126092447.11864-1-tomi.valkeinen@ti.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-12-03ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570Takashi Iwai
We've got a regression report for some Thinkpad models (at least T570s) which shows the too low speaker output volume. The bisection leaded to the commit 61fcf8ece9b6 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform"), and it's basically adding the two pin configurations for the dock, and looks harmless. The real culprit seems, though, that the DAC assignment for the speaker pin is implicitly assumed on these devices, i.e. pin NID 0x14 to be coupled with DAC NID 0x03. When more pins are configured by the commit above, the auto-parser changes the DAC assignment, and this resulted in the regression. As a workaround, just provide the fixed pin / DAC mapping table for this Thinkpad fixup function. It's no generic solution, but the problem itself is pretty much device-specific, so must be good enough. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1554304 Fixes: 61fcf8ece9b6 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform") Cc: <stable@vger.kernel.org> Reported-and-tested-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-02ide: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-02ide: pmac: add of_node_put()Yangtao Li
use of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-02drivers/tty: add missing of_node_put()Yangtao Li
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-02drivers/sbus/char: add of_node_put()Yangtao Li
use of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-02sbus: char: add of_node_put()Yangtao Li
use of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03csky: bugfix tlb_get_pgd error.Guo Ren
It's wrong to mask/unmask highest bit in addr to translate the vaddr to paddr. We should use PAGE_OFFSET and PHYS_OFFSET. Wrong implement: return ((get_pgd()|(1<<31)) - PHYS_OFFSET) & ~1; When PHYS_OFFSET=0xc0000000 and get_pgd() return 0xe0000000, it'll return 0x60000000. It's wrong and should be 0xa0000000. Now correct it to: return ((get_pgd() - PHYS_OFFSET) & ~1) + PAGE_OFFSET; Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2018-12-03MAINTAINERS: add maintainer for C-SKY driversGuo Ren
There are two intc drivers and two clocksource drivers, also include related dt-bindings' documentations. Change ren_guo@c-sky.com to guoren@kernel.org Signed-off-by: Guo Ren <ren_guo@c-sky.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-02Linux 4.20-rc5v4.20-rc5Linus Torvalds
2018-12-02Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Volume is a little higher than usual due to a set of gpio fixes for Davinci platforms that's been around a while, still seemed appropriate to not hold off until next merge window. Besides that it's the usual mix of minor fixes, mostly corrections of small stuff in device trees. Major stability-related one is the removal of a regulator from DT on Rock960, since DVFS caused undervoltage. I expect it'll be restored once they figure out the underlying issue" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) MAINTAINERS: Remove unused Qualcomm SoC mailing list ARM: davinci: dm644x: set the GPIO base to 0 ARM: davinci: da830: set the GPIO base to 0 ARM: davinci: dm355: set the GPIO base to 0 ARM: davinci: dm646x: set the GPIO base to 0 ARM: davinci: dm365: set the GPIO base to 0 ARM: davinci: da850: set the GPIO base to 0 gpio: davinci: restore a way to manually specify the GPIO base ARM: davinci: dm644x: define gpio interrupts as separate resources ARM: davinci: dm355: define gpio interrupts as separate resources ARM: davinci: dm646x: define gpio interrupts as separate resources ARM: davinci: dm365: define gpio interrupts as separate resources ARM: davinci: da8xx: define gpio interrupts as separate resources ARM: dts: at91: sama5d2: use the divided clock for SMC ARM: dts: imx51-zii-rdu1: Remove EEPROM node ARM: dts: rockchip: Remove @0 from the veyron memory node arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou. arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP arm64: dts: sdm845-mtp: Reserve reserved gpios arm64: dts: ti: k3-am654: Fix wakeup_uart reg address ...
2018-12-02Merge tag 'for-linus-4.20a-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - A revert of a previous commit as it is no longer necessary and has shown to cause problems in some memory hotplug cases. - Some small fixes and a minor cleanup. - A patch for adding better diagnostic data in a very rare failure case. * tag 'for-linus-4.20a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: pvcalls-front: fixes incorrect error handling Revert "xen/balloon: Mark unallocated host memory as UNUSABLE" xen: xlate_mmu: add missing header to fix 'W=1' warning xen/x86: add diagnostic printout to xen_mc_flush() in case of error x86/xen: cleanup includes in arch/x86/xen/spinlock.c
2018-12-02Merge tag 'dmaengine-fix-4.20-rc5' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "This contains two fixes to at_hdmac which fixes long standing bus reported recently on serial transfers causing memory leak. These fixes were done by Richard Genoud" * tag 'dmaengine-fix-4.20-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_hdmac: fix module unloading dmaengine: at_hdmac: fix memory leak in at_dma_xlate()
2018-12-02parisc: Enable -ffunction-sections for modules on 32-bit kernelHelge Deller
Frank Schreiner reported, that since kernel 4.18 he faces sysfs-warnings when loading modules on a 32-bit kernel. Here is one such example: sysfs: cannot create duplicate filename '/module/nfs/sections/.text' CPU: 0 PID: 98 Comm: modprobe Not tainted 4.18.0-2-parisc #1 Debian 4.18.10-2 Backtrace: [<1017ce2c>] show_stack+0x3c/0x50 [<107a7210>] dump_stack+0x28/0x38 [<103f900c>] sysfs_warn_dup+0x88/0xac [<103f8b1c>] sysfs_add_file_mode_ns+0x164/0x1d0 [<103f9e70>] internal_create_group+0x11c/0x304 [<103fa0a0>] sysfs_create_group+0x48/0x60 [<1022abe8>] load_module.constprop.35+0x1f9c/0x23b8 [<1022b278>] sys_finit_module+0xd0/0x11c [<101831dc>] syscall_exit+0x0/0x14 This warning gets triggered by the fact, that due to commit 24b6c22504a2 ("parisc: Build kernel without -ffunction-sections") we now get multiple .text sections in the kernel modules for which sysfs_create_group() can't create multiple virtual files. This patch works around the problem by re-enabling the -ffunction-sections compiler option for modules, while keeping it disabled for the non-module kernel code. Reported-by: Frank Scheiner <frank.scheiner@web.de> Fixes: 24b6c22504a2 ("parisc: Build kernel without -ffunction-sections") Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by: Helge Deller <deller@gmx.de>
2018-12-02SUNRPC: Fix a potential race in xprt_connect()Trond Myklebust
If an asynchronous connection attempt completes while another task is in xprt_connect(), then the call to rpc_sleep_on() could end up racing with the call to xprt_wake_pending_tasks(). So add a second test of the connection state after we've put the task to sleep and set the XPRT_CONNECTING flag, when we know that there can be no asynchronous connection attempts still in progress. Fixes: 0b9e79431377d ("SUNRPC: Move the test for XPRT_CONNECTING into...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-12-02SUNRPC: Fix a memory leak in call_encode()Trond Myklebust
If we retransmit an RPC request, we currently end up clobbering the value of req->rq_rcv_buf.bvec that was allocated by the initial call to xprt_request_prepare(req). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-12-02SUNRPC: Fix leak of krb5p encode pagesChuck Lever
call_encode can be invoked more than once per RPC call. Ensure that each call to gss_wrap_req_priv does not overwrite pointers to previously allocated memory. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-12-02SUNRPC: call_connect_status() must handle tasks that got transmittedTrond Myklebust
If a task failed to get the write lock in the call to xprt_connect(), then it will be queued on xprt->sending. In that case, it is possible for it to get transmitted before the call to call_connect_status(), in which case it needs to be handled by call_transmit_status() instead. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-12-02nfs: don't dirty kernel pages read by direct-ioDave Kleikamp
When we use direct_IO with an NFS backing store, we can trigger a WARNING in __set_page_dirty(), as below, since we're dirtying the page unnecessarily in nfs_direct_read_completion(). To fix, replicate the logic in commit 53cbf3b157a0 ("fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read"). Other filesystems that implement direct_IO handle this; most use blockdev_direct_IO(). ceph and cifs have similar logic. mount 127.0.0.1:/export /nfs dd if=/dev/zero of=/nfs/image bs=1M count=200 losetup --direct-io=on -f /nfs/image mkfs.btrfs /dev/loop0 mount -t btrfs /dev/loop0 /mnt/ kernel: WARNING: CPU: 0 PID: 8067 at fs/buffer.c:580 __set_page_dirty+0xaf/0xd0 kernel: Modules linked in: loop(E) nfsv3(E) rpcsec_gss_krb5(E) nfsv4(E) dns_resolver(E) nfs(E) fscache(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) fuse(E) tun(E) ip6t_rpfilter(E) ipt_REJECT(E) nf_ kernel: snd_seq(E) snd_seq_device(E) snd_pcm(E) video(E) snd_timer(E) snd(E) soundcore(E) ip_tables(E) xfs(E) libcrc32c(E) sd_mod(E) sr_mod(E) cdrom(E) ata_generic(E) pata_acpi(E) crc32c_intel(E) ahci(E) li kernel: CPU: 0 PID: 8067 Comm: kworker/0:2 Tainted: G E 4.20.0-rc1.master.20181111.ol7.x86_64 #1 kernel: Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 kernel: Workqueue: nfsiod rpc_async_release [sunrpc] kernel: RIP: 0010:__set_page_dirty+0xaf/0xd0 kernel: Code: c3 48 8b 02 f6 c4 04 74 d4 48 89 df e8 ba 05 f7 ff 48 89 c6 eb cb 48 8b 43 08 a8 01 75 1f 48 89 d8 48 8b 00 a8 04 74 02 eb 87 <0f> 0b eb 83 48 83 e8 01 eb 9f 48 83 ea 01 0f 1f 00 eb 8b 48 83 e8 kernel: RSP: 0000:ffffc1c8825b7d78 EFLAGS: 00013046 kernel: RAX: 000fffffc0020089 RBX: fffff2b603308b80 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: ffff9d11478115c8 RDI: ffff9d11478115d0 kernel: RBP: ffffc1c8825b7da0 R08: 0000646f6973666e R09: 8080808080808080 kernel: R10: 0000000000000001 R11: 0000000000000000 R12: ffff9d11478115d0 kernel: R13: ffff9d11478115c8 R14: 0000000000003246 R15: 0000000000000001 kernel: FS: 0000000000000000(0000) GS:ffff9d115ba00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00007f408686f640 CR3: 0000000104d8e004 CR4: 00000000000606f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: Call Trace: kernel: __set_page_dirty_buffers+0xb6/0x110 kernel: set_page_dirty+0x52/0xb0 kernel: nfs_direct_read_completion+0xc4/0x120 [nfs] kernel: nfs_pgio_release+0x10/0x20 [nfs] kernel: rpc_free_task+0x30/0x70 [sunrpc] kernel: rpc_async_release+0x12/0x20 [sunrpc] kernel: process_one_work+0x174/0x390 kernel: worker_thread+0x4f/0x3e0 kernel: kthread+0x102/0x140 kernel: ? drain_workqueue+0x130/0x130 kernel: ? kthread_stop+0x110/0x110 kernel: ret_from_fork+0x35/0x40 kernel: ---[ end trace 01341980905412c9 ]--- Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [forward-ported to v4.20] Signed-off-by: Calum Mackay <calum.mackay@oracle.com> Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-12-02flexfiles: enforce per-mirror stateid only for v4 DSesTigran Mkrtchyan
Since commit bb21ce0ad227 we always enforce per-mirror stateid. However, this makes sense only for v4+ servers. Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-12-01Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull STIBP fallout fixes from Thomas Gleixner: "The performance destruction department finally got it's act together and came up with a cure for the STIPB regression: - Provide a command line option to control the spectre v2 user space mitigations. Default is either seccomp or prctl (if seccomp is disabled in Kconfig). prctl allows mitigation opt-in, seccomp enables the migitation for sandboxed processes. - Rework the code to handle the conditional STIBP/IBPB control and remove the now unused ptrace_may_access_sched() optimization attempt - Disable STIBP automatically when SMT is disabled - Optimize the switch_to() logic to avoid MSR writes and invocations of __switch_to_xtra(). - Make the asynchronous speculation TIF updates synchronous to prevent stale mitigation state. As a general cleanup this also makes retpoline directly depend on compiler support and removes the 'minimal retpoline' option which just pretended to provide some form of security while providing none" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) x86/speculation: Provide IBPB always command line options x86/speculation: Add seccomp Spectre v2 user space protection mode x86/speculation: Enable prctl mode for spectre_v2_user x86/speculation: Add prctl() control for indirect branch speculation x86/speculation: Prepare arch_smt_update() for PRCTL mode x86/speculation: Prevent stale SPEC_CTRL msr content x86/speculation: Split out TIF update ptrace: Remove unused ptrace_may_access_sched() and MODE_IBRS x86/speculation: Prepare for conditional IBPB in switch_mm() x86/speculation: Avoid __switch_to_xtra() calls x86/process: Consolidate and simplify switch_to_xtra() code x86/speculation: Prepare for per task indirect branch speculation control x86/speculation: Add command line control for indirect branch speculation x86/speculation: Unify conditional spectre v2 print functions x86/speculataion: Mark command line parser data __initdata x86/speculation: Mark string arrays const correctly x86/speculation: Reorder the spec_v2 code x86/l1tf: Show actual SMT state x86/speculation: Rework SMT state change sched/smt: Expose sched_smt_present static key ...
generated by cgit (git 2.34.1) at 2025-09-11 09:58:48 +0000