| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 11 are cc:stable. 13 are MM and 5 are non-MM.
All patches are singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2025-01-13-00-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fs/proc: fix softlockup in __read_vmcore (part 2)
mm: fix assertion in folio_end_read()
mm: vmscan : pgdemote vmstat is not getting updated when MGLRU is enabled.
vmstat: disable vmstat_work on vmstat_cpu_down_prep()
zram: fix potential UAF of zram table
selftests/mm: set allocated memory to non-zero content in cow test
mm: clear uffd-wp PTE/PMD state on mremap()
module: fix writing of livepatch relocations in ROX text
mm: zswap: properly synchronize freeing resources during CPU hotunplug
Revert "mm: zswap: fix race between [de]compression and CPU hotunplug"
hugetlb: fix NULL pointer dereference in trace_hugetlbfs_alloc_inode
mm: fix div by zero in bdi_ratio_from_pages
x86/execmem: fix ROX cache usage in Xen PV guests
filemap: avoid truncating 64-bit offset to 32 bits
tools: fix atomic_set() definition to set the value correctly
mm/mempolicy: count MPOL_WEIGHTED_INTERLEAVE to "interleave_hit"
scripts/decode_stacktrace.sh: fix decoding of lines with an additional info
mm/kmemleak: fix percpu memory leak detection failure
|
|
Since commit 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore") the
number of softlockups in __read_vmcore at kdump time have gone down, but
they still happen sometimes.
In a memory constrained environment like the kdump image, a softlockup is
not just a harmless message, but it can interfere with things like RCU
freeing memory, causing the crashdump to get stuck.
The second loop in __read_vmcore has a lot more opportunities for natural
sleep points, like scheduling out while waiting for a data write to
happen, but apparently that is not always enough.
Add a cond_resched() to the second loop in __read_vmcore to (hopefully)
get rid of the softlockups.
Link: https://lkml.kernel.org/r/20250110102821.2a37581b@fangorn
Fixes: 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Breno Leitao <leitao@debian.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We only need to assert that the uptodate flag is clear if we're going to
set it. This hasn't been a problem before now because we have only used
folio_end_read() when completing with an error, but it's convenient to use
it in squashfs if we discover the folio is already uptodate.
Link: https://lkml.kernel.org/r/20250110163300.3346321-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When MGLRU is enabled, the pgdemote_kswapd, pgdemote_direct, and
pgdemote_khugepaged stats in vmstat are not being updated.
Commit f77f0c751478 ("mm,memcg: provide per-cgroup counters for NUMA
balancing operations") moved the pgdemote vmstat update from
demote_folio_list() to shrink_inactive_list(), which is in the normal LRU
path. As a result, the pgdemote stats are updated correctly for the
normal LRU but not for MGLRU.
To address this, we have added the pgdemote stat update in the
evict_folios() function, which is in the MGLRU path. With this patch, the
pgdemote stats will now be updated correctly when MGLRU is enabled.
Without this patch vmstat output when MGLRU is enabled
======================================================
pgdemote_kswapd 0
pgdemote_direct 0
pgdemote_khugepaged 0
With this patch vmstat output when MGLRU is enabled
===================================================
pgdemote_kswapd 43234
pgdemote_direct 4691
pgdemote_khugepaged 0
Link: https://lkml.kernel.org/r/20250109060540.451261-1-donettom@linux.ibm.com
Fixes: f77f0c751478 ("mm,memcg: provide per-cgroup counters for NUMA balancing operations")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kaiyang Zhao <kaiyang2@cs.cmu.edu>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The upstream commit adcfb264c3ed ("vmstat: disable vmstat_work on
vmstat_cpu_down_prep()") introduced another warning during the boot phase
so was soon reverted on upstream by commit cd6313beaeae ("Revert "vmstat:
disable vmstat_work on vmstat_cpu_down_prep()""). This commit resolves it
and reattempts the original fix.
Even after mm/vmstat:online teardown, shepherd may still queue work for
the dying cpu until the cpu is removed from online mask. While it's quite
rare, this means that after unbind_workers() unbinds a per-cpu kworker, it
potentially runs vmstat_update for the dying CPU on an irrelevant cpu
before entering atomic AP states. When CONFIG_DEBUG_PREEMPT=y, it results
in the following error with the backtrace.
BUG: using smp_processor_id() in preemptible [00000000] code: \
kworker/7:3/1702
caller is refresh_cpu_vm_stats+0x235/0x5f0
CPU: 0 UID: 0 PID: 1702 Comm: kworker/7:3 Tainted: G
Tainted: [N]=TEST
Workqueue: mm_percpu_wq vmstat_update
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xb0
check_preemption_disabled+0xce/0xe0
refresh_cpu_vm_stats+0x235/0x5f0
vmstat_update+0x17/0xa0
process_one_work+0x869/0x1aa0
worker_thread+0x5e5/0x1100
kthread+0x29e/0x380
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
So, for mm/vmstat:online, disable vmstat_work reliably on teardown and
symmetrically enable it on startup.
For secondary CPUs during CPU hotplug scenarios, ensure the delayed work
is disabled immediately after the initialization. These CPUs are not yet
online when start_shepherd_timer() runs on boot CPU. vmstat_cpu_online()
will enable the work for them.
Link: https://lkml.kernel.org/r/20250108042807.3429745-1-koichiro.den@canonical.com
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Suggested-by: Huacai Chen <chenhuacai@kernel.org>
Tested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If zram_meta_alloc failed early, it frees allocated zram->table without
setting it NULL. Which will potentially cause zram_meta_free to access
the table if user reset an failed and uninitialized device.
Link: https://lkml.kernel.org/r/20250107065446.86928-1-ryncsn@gmail.com
Fixes: 74363ec674cb ("zram: fix uninitialized ZRAM not releasing backing device")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit b1f202060afe ("mm: remap unused subpages to shared zeropage
when splitting isolated thp"), cow test cases involving swapping out THPs
via madvise(MADV_PAGEOUT) started to be skipped due to the subsequent
check via pagemap determining that the memory was not actually swapped
out. Logs similar to this were emitted:
...
# [RUN] Basic COW after fork() ... with swapped-out, PTE-mapped THP (16 kB)
ok 2 # SKIP MADV_PAGEOUT did not work, is swap enabled?
# [RUN] Basic COW after fork() ... with single PTE of swapped-out THP (16 kB)
ok 3 # SKIP MADV_PAGEOUT did not work, is swap enabled?
# [RUN] Basic COW after fork() ... with swapped-out, PTE-mapped THP (32 kB)
ok 4 # SKIP MADV_PAGEOUT did not work, is swap enabled?
...
The commit in question introduces the behaviour of scanning THPs and if
their content is predominantly zero, it splits them and replaces the pages
which are wholly zero with the zero page. These cow test cases were
getting caught up in this.
So let's avoid that by filling the contents of all allocated memory with
a non-zero value. With this in place, the tests are passing again.
Link: https://lkml.kernel.org/r/20250107142555.1870101-1-ryan.roberts@arm.com
Fixes: b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When mremap()ing a memory region previously registered with userfaultfd as
write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in
flag clearing leads to a mismatch between the vma flags (which have
uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp
cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to
trigger a warning in page_table_check_pte_flags() due to setting the pte
to writable while uffd-wp is still set.
Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any
such mremap() so that the values are consistent with the existing clearing
of VM_UFFD_WP. Be careful to clear the logical flag regardless of its
physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE,
huge PMD and hugetlb paths.
Link: https://lkml.kernel.org/r/20250107144755.1871363-2-ryan.roberts@arm.com
Co-developed-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Signed-off-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-mm/810b44a8-d2ae-4107-b665-5a42eae2d948@arm.com/
Fixes: 63b2d4174c4a ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl")
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A livepatch module can contain a special relocation section
.klp.rela.<objname>.<secname> to apply its relocations at the appropriate
time and to additionally access local and unexported symbols. When
<objname> points to another module, such relocations are processed
separately from the regular module relocation process. For instance, only
when the target <objname> actually becomes loaded.
With CONFIG_STRICT_MODULE_RWX, when the livepatch core decides to apply
these relocations, their processing results in the following bug:
[ 25.827238] BUG: unable to handle page fault for address: 00000000000012ba
[ 25.827819] #PF: supervisor read access in kernel mode
[ 25.828153] #PF: error_code(0x0000) - not-present page
[ 25.828588] PGD 0 P4D 0
[ 25.829063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 25.829742] CPU: 2 UID: 0 PID: 452 Comm: insmod Tainted: G O K 6.13.0-rc4-00078-g059dd502b263 #7820
[ 25.830417] Tainted: [O]=OOT_MODULE, [K]=LIVEPATCH
[ 25.830768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[ 25.831651] RIP: 0010:memcmp+0x24/0x60
[ 25.832190] Code: [...]
[ 25.833378] RSP: 0018:ffffa40b403a3ae8 EFLAGS: 00000246
[ 25.833637] RAX: 0000000000000000 RBX: ffff93bc81d8e700 RCX: ffffffffc0202000
[ 25.834072] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 00000000000012ba
[ 25.834548] RBP: ffffa40b403a3b68 R08: ffffa40b403a3b30 R09: 0000004a00000002
[ 25.835088] R10: ffffffffffffd222 R11: f000000000000000 R12: 0000000000000000
[ 25.835666] R13: ffffffffc02032ba R14: ffffffffc007d1e0 R15: 0000000000000004
[ 25.836139] FS: 00007fecef8c3080(0000) GS:ffff93bc8f900000(0000) knlGS:0000000000000000
[ 25.836519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 25.836977] CR2: 00000000000012ba CR3: 0000000002f24000 CR4: 00000000000006f0
[ 25.837442] Call Trace:
[ 25.838297] <TASK>
[ 25.841083] __write_relocate_add.constprop.0+0xc7/0x2b0
[ 25.841701] apply_relocate_add+0x75/0xa0
[ 25.841973] klp_write_section_relocs+0x10e/0x140
[ 25.842304] klp_write_object_relocs+0x70/0xa0
[ 25.842682] klp_init_object_loaded+0x21/0xf0
[ 25.842972] klp_enable_patch+0x43d/0x900
[ 25.843572] do_one_initcall+0x4c/0x220
[ 25.844186] do_init_module+0x6a/0x260
[ 25.844423] init_module_from_file+0x9c/0xe0
[ 25.844702] idempotent_init_module+0x172/0x270
[ 25.845008] __x64_sys_finit_module+0x69/0xc0
[ 25.845253] do_syscall_64+0x9e/0x1a0
[ 25.845498] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 25.846056] RIP: 0033:0x7fecef9eb25d
[ 25.846444] Code: [...]
[ 25.847563] RSP: 002b:00007ffd0c5d6de8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 25.848082] RAX: ffffffffffffffda RBX: 000055b03f05e470 RCX: 00007fecef9eb25d
[ 25.848456] RDX: 0000000000000000 RSI: 000055b001e74e52 RDI: 0000000000000003
[ 25.848969] RBP: 00007ffd0c5d6ea0 R08: 0000000000000040 R09: 0000000000004100
[ 25.849411] R10: 00007fecefac7b20 R11: 0000000000000246 R12: 000055b001e74e52
[ 25.849905] R13: 0000000000000000 R14: 000055b03f05e440 R15: 0000000000000000
[ 25.850336] </TASK>
[ 25.850553] Modules linked in: deku(OK+) uinput
[ 25.851408] CR2: 00000000000012ba
[ 25.852085] ---[ end trace 0000000000000000 ]---
The problem is that the .klp.rela.<objname>.<secname> relocations are
processed after the module was already formed and mod->rw_copy was reset.
However, the code in __write_relocate_add() calls
module_writable_address() which translates the target address 'loc' still
to 'loc + (mem->rw_copy - mem->base)', with mem->rw_copy now being 0.
Fix the problem by returning directly 'loc' in module_writable_address()
when the module is already formed. Function __write_relocate_add() knows
to use text_poke() in such a case.
Link: https://lkml.kernel.org/r/20250107153507.14733-1-petr.pavlu@suse.com
Fixes: 0c133b1e78cd ("module: prepare to handle ROX allocations for text")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reported-by: Marek Maslanka <mmaslanka@google.com>
Closes: https://lore.kernel.org/linux-modules/CAGcaFA2hdThQV6mjD_1_U+GNHThv84+MQvMWLgEuX+LVbAyDxg@mail.gmail.com/
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In zswap_compress() and zswap_decompress(), the per-CPU acomp_ctx of the
current CPU at the beginning of the operation is retrieved and used
throughout. However, since neither preemption nor migration are disabled,
it is possible that the operation continues on a different CPU.
If the original CPU is hotunplugged while the acomp_ctx is still in use,
we run into a UAF bug as some of the resources attached to the acomp_ctx
are freed during hotunplug in zswap_cpu_comp_dead() (i.e.
acomp_ctx.buffer, acomp_ctx.req, or acomp_ctx.acomp).
The problem was introduced in commit 1ec3b5fe6eec ("mm/zswap: move to use
crypto_acomp API for hardware acceleration") when the switch to the
crypto_acomp API was made. Prior to that, the per-CPU crypto_comp was
retrieved using get_cpu_ptr() which disables preemption and makes sure the
CPU cannot go away from under us. Preemption cannot be disabled with the
crypto_acomp API as a sleepable context is needed.
Use the acomp_ctx.mutex to synchronize CPU hotplug callbacks allocating
and freeing resources with compression/decompression paths. Make sure
that acomp_ctx.req is NULL when the resources are freed. In the
compression/decompression paths, check if acomp_ctx.req is NULL after
acquiring the mutex (meaning the CPU was offlined) and retry on the new
CPU.
The initialization of acomp_ctx.mutex is moved from the CPU hotplug
callback to the pool initialization where it belongs (where the mutex is
allocated). In addition to adding clarity, this makes sure that CPU
hotplug cannot reinitialize a mutex that is already locked by
compression/decompression.
Previously a fix was attempted by holding cpus_read_lock() [1]. This
would have caused a potential deadlock as it is possible for code already
holding the lock to fall into reclaim and enter zswap (causing a
deadlock). A fix was also attempted using SRCU for synchronization, but
Johannes pointed out that synchronize_srcu() cannot be used in CPU hotplug
notifiers [2].
Alternative fixes that were considered/attempted and could have worked:
- Refcounting the per-CPU acomp_ctx. This involves complexity in
handling the race between the refcount dropping to zero in
zswap_[de]compress() and the refcount being re-initialized when the
CPU is onlined.
- Disabling migration before getting the per-CPU acomp_ctx [3], but
that's discouraged and is a much bigger hammer than needed, and could
result in subtle performance issues.
[1]https://lkml.kernel.org/20241219212437.2714151-1-yosryahmed@google.com/
[2]https://lkml.kernel.org/20250107074724.1756696-2-yosryahmed@google.com/
[3]https://lkml.kernel.org/20250107222236.2715883-2-yosryahmed@google.com/
[yosryahmed@google.com: remove comment]
Link: https://lkml.kernel.org/r/CAJD7tkaxS1wjn+swugt8QCvQ-rVF5RZnjxwPGX17k8x9zSManA@mail.gmail.com
Link: https://lkml.kernel.org/r/20250108222441.3622031-1-yosryahmed@google.com
Fixes: 1ec3b5fe6eec ("mm/zswap: move to use crypto_acomp API for hardware acceleration")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Closes: https://lore.kernel.org/lkml/20241113213007.GB1564047@cmpxchg.org/
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/lkml/CAEkJfYMtSdM5HceNsXUDf5haghD5+o2e7Qv4OcuruL4tPg6OaQ@mail.gmail.com/
Cc: Barry Song <baohua@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit eaebeb93922ca6ab0dd92027b73d0112701706ef.
Commit eaebeb93922c ("mm: zswap: fix race between [de]compression and CPU
hotunplug") used the CPU hotplug lock in zswap compress/decompress
operations to protect against a race with CPU hotunplug making some
per-CPU resources go away.
However, zswap compress/decompress can be reached through reclaim while
the lock is held, resulting in a potential deadlock as reported by syzbot:
======================================================
WARNING: possible circular locking dependency detected
6.13.0-rc6-syzkaller-00006-g5428dc1906dd #0 Not tainted
------------------------------------------------------
kswapd0/89 is trying to acquire lock:
ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: acomp_ctx_get_cpu mm/zswap.c:886 [inline]
ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: zswap_compress mm/zswap.c:908 [inline]
ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: zswap_store_page mm/zswap.c:1439 [inline]
ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: zswap_store+0xa74/0x1ba0 mm/zswap.c:1546
but task is already holding lock:
ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:6871 [inline]
ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0xb58/0x2f30 mm/vmscan.c:7253
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
__fs_reclaim_acquire mm/page_alloc.c:3853 [inline]
fs_reclaim_acquire+0x88/0x130 mm/page_alloc.c:3867
might_alloc include/linux/sched/mm.h:318 [inline]
slab_pre_alloc_hook mm/slub.c:4070 [inline]
slab_alloc_node mm/slub.c:4148 [inline]
__kmalloc_cache_node_noprof+0x40/0x3a0 mm/slub.c:4337
kmalloc_node_noprof include/linux/slab.h:924 [inline]
alloc_worker kernel/workqueue.c:2638 [inline]
create_worker+0x11b/0x720 kernel/workqueue.c:2781
workqueue_prepare_cpu+0xe3/0x170 kernel/workqueue.c:6628
cpuhp_invoke_callback+0x48d/0x830 kernel/cpu.c:194
__cpuhp_invoke_callback_range kernel/cpu.c:965 [inline]
cpuhp_invoke_callback_range kernel/cpu.c:989 [inline]
cpuhp_up_callbacks kernel/cpu.c:1020 [inline]
_cpu_up+0x2b3/0x580 kernel/cpu.c:1690
cpu_up+0x184/0x230 kernel/cpu.c:1722
cpuhp_bringup_mask+0xdf/0x260 kernel/cpu.c:1788
cpuhp_bringup_cpus_parallel+0xf9/0x160 kernel/cpu.c:1878
bringup_nonboot_cpus+0x2b/0x50 kernel/cpu.c:1892
smp_init+0x34/0x150 kernel/smp.c:1009
kernel_init_freeable+0x417/0x5d0 init/main.c:1569
kernel_init+0x1d/0x2b0 init/main.c:1466
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904
__lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
cpus_read_lock+0x42/0x150 kernel/cpu.c:490
acomp_ctx_get_cpu mm/zswap.c:886 [inline]
zswap_compress mm/zswap.c:908 [inline]
zswap_store_page mm/zswap.c:1439 [inline]
zswap_store+0xa74/0x1ba0 mm/zswap.c:1546
swap_writepage+0x647/0xce0 mm/page_io.c:279
shmem_writepage+0x1248/0x1610 mm/shmem.c:1579
pageout mm/vmscan.c:696 [inline]
shrink_folio_list+0x35ee/0x57e0 mm/vmscan.c:1374
shrink_inactive_list mm/vmscan.c:1967 [inline]
shrink_list mm/vmscan.c:2205 [inline]
shrink_lruvec+0x16db/0x2f30 mm/vmscan.c:5734
mem_cgroup_shrink_node+0x385/0x8e0 mm/vmscan.c:6575
mem_cgroup_soft_reclaim mm/memcontrol-v1.c:312 [inline]
memcg1_soft_limit_reclaim+0x346/0x810 mm/memcontrol-v1.c:362
balance_pgdat mm/vmscan.c:6975 [inline]
kswapd+0x17b3/0x2f30 mm/vmscan.c:7253
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(cpu_hotplug_lock);
lock(fs_reclaim);
rlock(cpu_hotplug_lock);
*** DEADLOCK ***
1 lock held by kswapd0/89:
#0: ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:6871 [inline]
#0: ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0xb58/0x2f30 mm/vmscan.c:7253
stack backtrace:
CPU: 0 UID: 0 PID: 89 Comm: kswapd0 Not tainted 6.13.0-rc6-syzkaller-00006-g5428dc1906dd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074
check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904
__lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
cpus_read_lock+0x42/0x150 kernel/cpu.c:490
acomp_ctx_get_cpu mm/zswap.c:886 [inline]
zswap_compress mm/zswap.c:908 [inline]
zswap_store_page mm/zswap.c:1439 [inline]
zswap_store+0xa74/0x1ba0 mm/zswap.c:1546
swap_writepage+0x647/0xce0 mm/page_io.c:279
shmem_writepage+0x1248/0x1610 mm/shmem.c:1579
pageout mm/vmscan.c:696 [inline]
shrink_folio_list+0x35ee/0x57e0 mm/vmscan.c:1374
shrink_inactive_list mm/vmscan.c:1967 [inline]
shrink_list mm/vmscan.c:2205 [inline]
shrink_lruvec+0x16db/0x2f30 mm/vmscan.c:5734
mem_cgroup_shrink_node+0x385/0x8e0 mm/vmscan.c:6575
mem_cgroup_soft_reclaim mm/memcontrol-v1.c:312 [inline]
memcg1_soft_limit_reclaim+0x346/0x810 mm/memcontrol-v1.c:362
balance_pgdat mm/vmscan.c:6975 [inline]
kswapd+0x17b3/0x2f30 mm/vmscan.c:7253
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Revert the change. A different fix for the race with CPU hotunplug will
follow.
Link: https://lkml.kernel.org/r/20250107222236.2715883-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sam Sun <samsun1006219@gmail.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
hugetlb_file_setup() will pass a NULL @dir to hugetlbfs_get_inode(), so we
will access a NULL pointer for @dir. Fix it and set __entry->dr to 0 if
@dir is NULL. Because ->i_ino cannot be 0 (see get_next_ino()), there is
no confusing if user sees a 0 inode number.
Link: https://lkml.kernel.org/r/20250106033118.4640-1-songmuchun@bytedance.com
Fixes: 318580ad7f28 ("hugetlbfs: support tracepoint")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: Cheung Wall <zzqq0103.hey@gmail.com>
Closes: https://lore.kernel.org/linux-mm/02858D60-43C1-4863-A84F-3C76A8AF1F15@linux.dev/T/#
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Cc: cheung wall <zzqq0103.hey@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During testing it has been detected, that it is possible to get div by
zero error in bdi_set_min_bytes. The error is caused by the function
bdi_ratio_from_pages(). bdi_ratio_from_pages() calls global_dirty_limits.
If the dirty threshold is 0, the div by zero is raised. This can happen
if the root user is setting:
echo 0 > /proc/sys/vm/dirty_ratio
The following is a test case:
echo 0 > /proc/sys/vm/dirty_ratio
cd /sys/class/bdi/<device>
echo 1 > strict_limit
echo 8192 > min_bytes
==> error is raised.
The problem is addressed by returning -EINVAL if dirty_ratio or
dirty_bytes is set to 0.
[shr@devkernel.io: check for -EINVAL in bdi_set_min_bytes() and bdi_set_max_bytes()]
Link: https://lkml.kernel.org/r/20250108014723.166637-1-shr@devkernel.io
[shr@devkernel.io: v3]
Link: https://lkml.kernel.org/r/20250109063411.6591-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20250104012037.159386-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reported-by: cheung wall <zzqq0103.hey@gmail.com>
Closes: https://lore.kernel.org/linux-mm/87pll35yd0.fsf@devkernel.io/T/#t
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Qiang Zhang <zzqq0103.hey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The recently introduced ROX cache for modules is assuming large page
support in 64-bit mode without testing the related feature bit. This
results in breakage when running as a Xen PV guest, as in this mode large
pages are not supported.
Fix that by testing the X86_FEATURE_PSE capability when deciding whether
to enable the ROX cache.
Link: https://lkml.kernel.org/r/20250103065631.26459-1-jgross@suse.com
Fixes: 2e45474ab14f ("execmem: add support for cache of large ROX pages")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a
64-bit value to 32 bits, leading to a possible infinite loop when writing
to an xfs filesystem.
Link: https://lkml.kernel.org/r/20250102190540.1356838-1-marco.nelissen@gmail.com
Fixes: 54fa39ac2e00 ("iomap: use mapping_seek_hole_data")
Signed-off-by: Marco Nelissen <marco.nelissen@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently vma test is failing because of the new vma_assert_attached()
assertion. The check is failing because previous refcount_set() inside
vma_mark_attached() is a NoOp. Fix the definition of atomic_set() to
correctly set the value of the atomic.
Link: https://lkml.kernel.org/r/20241227222220.1726384-1-surenb@google.com
Fixes: 9325b8b5a1cb ("tools: add skeleton code for userland testing of VMA logic")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit fa3bea4e1f82 introduced MPOL_WEIGHTED_INTERLEAVE but it missed
adding its counter to "interleave_hit" of numastat, which is located at
/sys/devices/system/node/nodeN/ directory.
It'd be better to add weighted interleving counter info to the existing
"interleave_hit" instead of introducing a new counter
"weighted_interleave_hit".
Link: https://lkml.kernel.org/r/20241227095737.645-1-honggyu.kim@sk.com
Fixes: fa3bea4e1f82 ("mm/mempolicy: introduce MPOL_WEIGHTED_INTERLEAVE for weighted interleaving")
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Hyeonggon Yoo <hyeonggon.yoo@sk.com>
Tested-by: Yunjeong Mun <yunjeong.mun@sk.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit bdf8eafbf7f5 ("arm64: stacktrace: report source of unwind
data") a stack trace line can contain an additional info field that was not
present before, in the form of one or more letters in parentheses. E.g.:
[ 504.517915] led_sysfs_enable+0x54/0x80 (P)
^^^
When this is present, decode_stacktrace decodes the line incorrectly:
[ 504.517915] led_sysfs_enable+0x54/0x80 P
Extend parsing to decode it correctly:
[ 504.517915] led_sysfs_enable (drivers/leds/led-core.c:455 (discriminator 7)) (P)
The regex to match such lines assumes the info can be extended in the
future to other uppercase characters, and will need to be extended in case
other characters will be used. Using a much more generic regex might incur
in false positives, so this looked like a good tradeoff.
Link: https://lkml.kernel.org/r/20241230-decode_stacktrace-fix-info-v1-1-984910659173@bootlin.com
Fixes: bdf8eafbf7f5 ("arm64: stacktrace: report source of unwind data")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Puranjay Mohan <puranjay@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kmemleak_alloc_percpu gives an incorrect min_count parameter, causing
percpu memory to be considered a gray object.
Link: https://lkml.kernel.org/r/20241227092311.3572500-1-guoweikang.kernel@gmail.com
Fixes: 8c8685928910 ("mm/kmemleak: use IS_ERR_PCPU() for pointer in the percpu address space")
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Guo Weikang <guoweikang.kernel@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small IIO and interconnect and other driver fixes
to resolve reported issues. Included in here are:
- loads of iio driver fixes as a result of an audit of places where
uninitialized data would leak to userspace.
- other smaller, and normal, iio driver fixes.
- mhi driver fix
- interconnect driver fixes
- pci1xxxx driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits)
misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
interconnect: icc-clk: check return values of devm_kasprintf()
interconnect: qcom: icc-rpm: Set the count member before accessing the flex array
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs fixes from Greg KH:
"Here are some small driver core and debugfs fixes that resolve some
reported problems:
- debugfs runtime error reporting fixes
- topology cpumask race-condition fix
- MAINTAINERS file email update
All of these have been in linux-next this week with no reported
issues"
* tag 'driver-core-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
fs: debugfs: fix open proxy for unsafe files
MAINTAINERS: align Danilo's maintainer entries
topology: Keep the cpumask unchanged when printing cpumap
debugfs: fix missing mutex_destroy() in short_fops case
fs: debugfs: differentiate short fops with proxy ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes that resolve some reported
issues and have been in my tree for too long due to the holiday break.
They resolve the following issues:
- lots of gpib build-time fixes as reported by testers and 0-day
- gpib logical fixes
- mailmap fix
All of these have been in linux-next for a while, with no reported
issues other than the duplicated change"
* tag 'staging-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: mite: remove unused global functions
staging: gpib: refer to correct config symbol in tnt4882 Makefile
mailmap: update Bingwu Zhang's email address
staging: gpib: fix address space mixup
staging: gpib: use ioport_map
staging: gpib: fix pcmcia dependencies
staging: gpib: add module author and description fields
staging: gpib: fix Makefiles
staging: gpib: make global 'usec_diff' functions static
staging: gpib: Modify mismatched function name
staging: gpib: Add lower bound check for secondary address
staging: gpib: Fix erroneous removal of blank before newline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes tree. They resolve some
reported issues:
- stm32 break control fix
- 8250 runtime pm usage counter fix
- imx driver locking fix
All have been in my tree and linux-next for three weeks now, with no
reported issues"
* tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: stm32: use port lock wrappers for break control
serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
tty: serial: 8250: Fix another runtime PM usage counter underflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.13-rc7.
Included in here are:
- usb serial new device ids
- typec bugfixes for reported issues
- dwc3 driver fixes
- chipidea driver fixes
- gadget driver fixes
- other minor fixes for reported problems.
All of these have been in linux-next for a while, with no reported
issues"
* tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Neoway N723-EA support
USB: serial: option: add MeiG Smart SRM815
USB: serial: cp210x: add Phoenix Contact UPS Device
usb: typec: fix pm usage counter imbalance in ucsi_ccg_sync_control()
usb-storage: Add max sectors quirk for Nokia 208
usb: gadget: midi2: Reverse-select at the right place
usb: gadget: f_fs: Remove WARN_ON in functionfs_bind
USB: core: Disable LPM only for non-suspended ports
usb: fix reference leak in usb_new_device()
usb: typec: tcpci: fix NULL pointer issue on shared irq case
usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null
usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()
usb: typec: ucsi: Set orientation as none when connector is unplugged
usb: gadget: configfs: Ignore trailing LF for user strings to cdev
USB: usblp: return error when setting unsupported protocol
usb: gadget: f_uac2: Fix incorrect setting of bNumEndpoints
usb: typec: tcpm/tcpci_maxim: fix error code in max_contaminant_read_resistance_kohm()
usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property
usb: dwc3-am62: Disable autosuspend during remove
usb: dwc3: gadget: fix writing NYET threshold
|
|
Pull kvm fixes from Paolo Bonzini:
"The largest part here is for KVM/PPC, where a NULL pointer dereference
was introduced in the 6.13 merge window and is now fixed.
There's some "holiday-induced lateness", as the s390 submaintainer put
it, but otherwise things looks fine.
s390:
- fix a latent bug when the kernel is compiled in debug mode
- two small UCONTROL fixes and their selftests
arm64:
- always check page state in hyp_ack_unshare()
- align set_id_regs selftest with the fact that ASIDBITS field is RO
- various vPMU fixes for bugs that only affect nested virt
PPC e500:
- Fix a mostly impossible (but just wrong) case where IRQs were never
re-enabled
- Observe host permissions instead of mapping readonly host pages as
guest-writable. This fixes a NULL-pointer dereference in 6.13
- Replace brittle VMA-based attempts at building huge shadow TLB
entries with PTE lookups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: e500: perform hugepage check after looking up the PFN
KVM: e500: map readonly host pages for read
KVM: e500: track host-writability of pages
KVM: e500: use shadow TLB entry as witness for writability
KVM: e500: always restore irqs
KVM: s390: selftests: Add has device attr check to uc_attr_mem_limit selftest
KVM: s390: selftests: Add ucontrol gis routing test
KVM: s390: Reject KVM_SET_GSI_ROUTING on ucontrol VMs
KVM: s390: selftests: Add ucontrol flic attr selftests
KVM: s390: Reject setting flic pfault attributes on ucontrol VMs
KVM: s390: vsie: fix virtual/physical address in unpin_scb()
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a #GP in the perf user callchain code caused by a race between
uprobe freeing the task and the bpf profiler unwinding the task's
user stack
* tag 'perf_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Fix race in uprobe_free_utask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Check whether shadow stack is active before using the ptrace regset
getter
- Remove a wrong BUG_ON in the early static call code which breaks Xen
PVH when booting as dom0
* tag 'x86_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Ensure shadow stack is active before "getting" registers
x86/static-call: Remove early_boot_irqs_disabled check to fix Xen PVH dom0
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: three small bugfixes
Fix a latent bug when the kernel is compiled in debug mode.
Two small UCONTROL fixes and their selftests.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.13, part #3
- Always check page state in hyp_ack_unshare()
- Align set_id_regs selftest with the fact that ASIDBITS field is RO
- Various vPMU fixes for bugs that only affect nested virt
|
|
The new __kvm_faultin_pfn() function is upset by the fact that e500
KVM ignores host page permissions - __kvm_faultin requires a "writable"
outgoing argument, but e500 KVM is passing NULL.
While a simple fix would be possible that simply allows writable to
be NULL, it is quite ugly to have e500 KVM ignore completely the host
permissions and map readonly host pages as guest-writable. Merge a more
complete fix and remove the VMA-based attempts at building huge shadow TLB
entries. Using a PTE lookup, similar to what is done for x86, is better
and works with remap_pfn_range() because it does not assume that VM_PFNMAP
areas are contiguous. Note that the same incorrect logic is there in
ARM's get_vma_page_shift() and RISC-V's kvm_riscv_gstage_ioremap().
Fortunately, for e500 most of the code is already there; it just has to
be changed to compute the range from find_linux_pte()'s output rather
than find_vma(). The new code works for both VM_PFNMAP and hugetlb
mappings, so the latter is removed.
Patches 2-5 were tested by the reporter, Christian Zigotzky. Since
the difference with v1 is minimal, I am going to send it to Linus
today.
|
|
e500 KVM tries to bypass __kvm_faultin_pfn() in order to map VM_PFNMAP
VMAs as huge pages. This is a Bad Idea because VM_PFNMAP VMAs could
become noncontiguous as a result of callsto remap_pfn_range().
Instead, use the already existing host PTE lookup to retrieve a
valid host-side mapping level after __kvm_faultin_pfn() has
returned. Then find the largest size that will satisfy the
guest's request while staying within a single host PTE.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The new __kvm_faultin_pfn() function is upset by the fact that e500 KVM
ignores host page permissions - __kvm_faultin requires a "writable"
outgoing argument, but e500 KVM is nonchalantly passing NULL.
If the host page permissions do not include writability, the shadow
TLB entry is forcibly mapped read-only.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the possibility of marking a page so that the UW and SW bits are
force-cleared. This is stored in the private info so that it persists
across multiple calls to kvmppc_e500_setup_stlbe.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvmppc_e500_ref_setup is returning whether the guest TLB entry is writable,
which is than passed to kvm_release_faultin_page. This makes little sense
for two reasons: first, because the function sets up the private data for
the page and the return value feels like it has been bolted on the side;
second, because what really matters is whether the _shadow_ TLB entry is
writable. If it is not writable, the page can be released as non-dirty.
Shift from using tlbe_is_writable(gtlbe) to doing the same check on
the shadow TLB entry.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If find_linux_pte fails, IRQs will not be restored. This is unlikely
to happen in practice since it would have been reported as hanging
hosts, but it should of course be fixed anyway.
Cc: stable@vger.kernel.org
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
"Fix to free trace_kprobe objects at a failure path in
__trace_kprobe_create() function. This fixes a memory leak"
* tag 'probes-fixes-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix to free objects when failed to copy a symbol
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"One patch to fix error handling in drivetemp driver"
* tag 'hwmon-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur
|
|
Pull block fix from Jens Axboe:
"A single fix for a use-after-free in the BFQ IO scheduler"
* tag 'block-6.13-20250111' of git://git.kernel.dk/linux:
block, bfq: fix waker_bfqq UAF after bfq_split_bfqq()
|
|
Pull io_uring fixes from Jens Axboe:
- Fix for multishot timeout updates only using the updated value for
the first invocation, not subsequent ones
- Silence a false positive lockdep warning
- Fix the eventfd signaling and putting RCU logic
- Fix fault injected SQPOLL setup not clearing the task pointer in the
error path
- Fix local task_work looking at the SQPOLL thread rather than just
signaling the safe variant. Again one of those theoretical issues,
which should be closed up none the less.
* tag 'io_uring-6.13-20250111' of git://git.kernel.dk/linux:
io_uring: don't touch sqd->thread off tw add
io_uring/sqpoll: zero sqd->thread on tctx errors
io_uring/eventfd: ensure io_eventfd_signal() defers another RCU period
io_uring: silence false positive warnings
io_uring/timeout: fix multishot updates
|
|
Pull smb client fix from Steve French:
- fix unneeded session setup retry due to stale password e.g. for DFS
automounts
* tag '6.13-rc6-SMB3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: sync the root session and superblock context passwords before automounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Over the Christmas break a couple of devicetree fixes came in for
Rockchips, Qualcomm and NXP/i.MX. These add some missing board
specific properties, address build time warnings,
The USB/TOG supoprt on X1 Elite regressed, so two earlier DT changes
get reverted for now.
Aside from the devicetree fixes, there is One build fix for the stm32
firewall driver, and a defconfig change to enable SPDIF support for
i.MX"
* tag 'soc-fixes-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firewall: remove misplaced semicolon from stm32_firewall_get_firewall
arm64: dts: rockchip: add hevc power domain clock to rk3328
arm64: dts: rockchip: Fix the SD card detection on NanoPi R6C/R6S
arm64: dts: qcom: sa8775p: fix the secure device bootup issue
Revert "arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers"
Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports"
arm64: dts: qcom: x1e80100: Fix up BAR space size for PCIe6a
Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports"
ARM: dts: imxrt1050: Fix clocks for mmc
ARM: imx_v6_v7_defconfig: enable SND_SOC_SPDIF
arm64: dts: imx95: correct the address length of netcmix_blk_ctrl
arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai
arm64: dts: rockchip: rename rfkill label for Radxa ROCK 5B
arm64: dts: rockchip: add reset-names for combphy on rk3568
arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
|
|
Maddy is taking over the day-to-day maintenance of powerpc. I will still
be around to help, and as a backup.
Re-order the main POWERPC list to put Maddy first to reflect that.
KVM/powerpc patches will be handled by Maddy via the powerpc tree with
review from Nick, so replace myself with Maddy there.
Remove myself from BPF, leaving Hari & Christophe as maintainers.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
automounting
In some cases, when password2 becomes the working password, the
client swaps the two password fields in the root session struct, but
not in the smb3_fs_context struct in cifs_sb. DFS automounts inherit
fs context from their parent mounts. Therefore, they might end up
getting the passwords in the stale order.
The automount should succeed, because the mount function will end up
retrying with the actual password anyway. But to reduce these
unnecessary session setup retries for automounts, we can sync the
parent context's passwords with the root session's passwords before
duplicating it to the child's fs context.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix corner case bug where ops.dispatch() couldn't extend the
execution of the current task if SCX_OPS_ENQ_LAST is set.
- Fix ops.cpu_release() not being called when a SCX task is preempted
by a higher priority sched class task.
- Fix buitin idle mask being incorrectly left as busy after an idle CPU
is picked and kicked.
- scx_ops_bypass() was unnecessarily using rq_lock() which comes with
rq pinning related sanity checks which could trigger spuriously.
Switch to raw_spin_rq_lock().
* tag 'sched_ext-for-6.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Refresh idle masks during idle-to-idle transitions
sched_ext: switch class when preempted by higher priority scheduler
sched_ext: Replace rq_lock() to raw_spin_rq_lock() in scx_ops_bypass()
sched_ext: keep running prev when prev->scx.slice != 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Cpuset fixes:
- Fix isolated CPUs leaking into sched domains
- Remove now unnecessary kernfs active break which can trigger a
warning
- Comment updates"
* tag 'cgroup-for-6.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: remove kernfs active break
cgroup/cpuset: Prevent leakage of isolated CPUs into sched domains
cgroup/cpuset: Remove stale text
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
- Add a WARN_ON_ONCE() on queue_delayed_work_on() on an offline CPU as
such work items won't get executed till the CPU comes back online
* tag 'wq-for-6.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: warn if delayed_work is queued to an offlined cpu.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix an OF node leak in the code parsing thermal zone DT properties
(Joe Hattori)"
* tag 'thermal-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: of: fix OF node leak in of_thermal_zone_find()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add two more ACPI IRQ override quirks and update the code using them
to avoid unnecessary overhead (Hans de Goede)"
* tag 'acpi-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: acpi_dev_irq_override(): Check DMI match last
ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[]
ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]
|
|
With the consolidation of put_prev_task/set_next_task(), see
commit 436f3eed5c69 ("sched: Combine the last put_prev_task() and the
first set_next_task()"), we are now skipping the transition between
these two functions when the previous and the next tasks are the same.
As a result, the scx idle state of a CPU is updated only when
transitioning to or from the idle thread. While this is generally
correct, it can lead to uneven and inefficient core utilization in
certain scenarios [1].
A typical scenario involves proactive wake-ups: scx_bpf_pick_idle_cpu()
selects and marks an idle CPU as busy, followed by a wake-up via
scx_bpf_kick_cpu(), without dispatching any tasks. In this case, the CPU
continues running the idle thread, returns to idle, but remains marked
as busy, preventing it from being selected again as an idle CPU (until a
task eventually runs on it and releases the CPU).
For example, running a workload that uses 20% of each CPU, combined with
an scx scheduler using proactive wake-ups, results in the following core
utilization:
CPU 0: 25.7%
CPU 1: 29.3%
CPU 2: 26.5%
CPU 3: 25.5%
CPU 4: 0.0%
CPU 5: 25.5%
CPU 6: 0.0%
CPU 7: 10.5%
To address this, refresh the idle state also in pick_task_idle(), during
idle-to-idle transitions, but only trigger ops.update_idle() on actual
state changes to prevent unnecessary updates to the scx scheduler and
maintain balanced state transitions.
With this change in place, the core utilization in the previous example
becomes the following:
CPU 0: 18.8%
CPU 1: 19.4%
CPU 2: 18.0%
CPU 3: 18.7%
CPU 4: 19.3%
CPU 5: 18.9%
CPU 6: 18.7%
CPU 7: 19.3%
[1] https://github.com/sched-ext/scx/pull/1139
Fixes: 7c65ae81ea86 ("sched_ext: Don't call put_prev_task_scx() before picking the next task")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
