summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-15drm/amd/display: revert Disable DRR actions during state commitMartin Leung
why and how: causes unstable on certain surface format/mpo transitions This reverts commit de020e5fa9ebc6fc32e82ae6ccb0282451ed937c Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Don't check output BPP for phantomAlvin Lee
[Description] - If we're enabling phantom pipe for a high link rate display we could fail DML on the phantom pipe since it's set to virtual signal - Therefore don't consider Output BPP for phantom pipe Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: fix unbounded requesting for high pixel rate modes on dcn315Dmytro Laktyushkin
Unbounded requesting is getting configured for odm mode calculations which is incorrect. This change checks whether mode requires odm ahead of time. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix calculation for cursor CAB allocationGeorge Shen
[Why] The cursor size (in memory) is currently incorrectly calculated, resulting not enough CAB being allocated for static screen cursor in MALL refresh. This results in cursor image corruption. [How] Use cursor pitch instead of cursor width when calculating cursor size. Update num cache lines calculation to use the result of the cursor size calculation instead of manually recalculating again. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Align phantom pipe dst/src scaling with main for subvpDillon Varone
[WHY?] Subvp src/dst stream rectangles are not being created with the same scaling factors as the main stream. [HOW?] Make sure subvp stream src rectangle scales its height to have the same src/dst ratio as the main stream. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Check context constructed for pipe split flags is still validDillon Varone
[WHY?] After applying pipesplit flags, DML can select a different configuration upon revalidation, despite the desired one still being valid. [HOW?] Check the configuration is still has mode support, and apply it. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: fix dcn3.1x mode validation on high bandwidth configCharlene Liu
[why] 1. correct dram_channel_width (was hard coded to 4 for 32bit) 2. use dm's is_hvm_enable status flag for hostvm_en input for dml. 3. add a function to override to all dcn3.1x. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Workaround to increase phantom pipe vactive in pipesplitGeorge Shen
[Why] Certain high resolution displays exhibit DCC line corruption with SubVP enabled. This is likely due to insufficient DCC meta data buffered immediately after the mclk switch. [How] Add workaround to increase phantom pipe vactive height by meta_row_height number of lines, thus increasing the amount of meta data buffered immediately after mclk switch finishes. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: enable dchub request limit for DCN 3.2.xJun Lei
[why] HW recommend we enable this for better DF QoS for DCN 3.2.x [how] Add interfaces to hubbub to program register Add initialization as part of init_hw Add default settings for DCN 3.2.x Add registry override for debug/tuning Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15Merge tag 'erofs-for-6.1-rc6-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: "Most patches randomly fix error paths or corner cases in fscache mode reported recently. One fixes an invalid access relating to fragments on crafted images. Summary: - Fix packed_inode invalid access when reading fragments on crafted images - Add a missing erofs_put_metabuf() in an error path in fscache mode - Fix incorrect `count' for unmapped extents in fscache mode - Fix use-after-free of fsid and domain_id string when remounting - Fix missing xas_retry() in fscache mode" * tag 'erofs-for-6.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix missing xas_retry() in fscache mode erofs: fix use-after-free of fsid and domain_id string erofs: get correct count for unmapped range in fscache mode erofs: put metabuf in error path in fscache mode erofs: fix general protection fault when reading fragment
2022-11-15drm/amd/pm: fix SMU13 runpm hang due to unintentional workaroundEvan Quan
The workaround designed for some specific ASICs is wrongly applied to SMU13 ASICs. That leads to some runpm hang. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-15drm/amd/pm: enable runpm support over BACO for SMU13.0.7Evan Quan
Enable SMU13.0.7 runpm support. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amd/pm: enable runpm support over BACO for SMU13.0.0Evan Quan
Enable SMU13.0.0 runpm support. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amdgpu: there is no vbios fb on devices with no display hw (v2)Alex Deucher
If we enable virtual display functionality on parts with no display hardware we can end up trying to check for and reserve the vbios FB area on devices where it doesn't exist. Check if display hardware is actually present on the hardware before trying to reserve the memory. v2: move the check into common code Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdkfd: Fix a memory limit issueEric Huang
It is to resolve a regression, which fails to allocate VRAM due to no free memory in application, the reason is we add check of vram_pin_size for memory limit, and application is pinning the memory for Peerdirect, KFD should not count it in memory limit. So removing vram_pin_size will resolve it. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: disable BACO support on more cardsGuchun Chen
Otherwise, some unexpected PCIE AER errors will be observed in runtime suspend/resume cycle. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: don't enable DRM CRTC degamma property for DCEMelissa Wen
DM maps DRM CRTC degamma to DPP (pre-blending) degamma block, but DCE doesn't support programmable degamma curve anywhere. Currently, a custom degamma is accepted by DM but just ignored by DCE driver and degamma correction isn't actually applied. There is no way to map custom degamma in DCE, therefore, DRM CRTC degamma property shouldn't be enabled for DCE drivers. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-15drm/amd/display: Set max for prefetch lines on dcn32Dillon Varone
[WHY?] Max number of lines that can be used for prefetch due to type constraints is 63.75. [HOW?] Enforce maximum prefetch lines as 63.75. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32Dillon Varone
[WHY?] DCN32 uses fclk pstate watermarks for dummy pstate, and must always be supported. [HOW?] Validation needs to be run with fclk pstate latency set as the dummy pstate latency to get correct prefetch and bandwidth outputs. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix prefetch calculations for dcn32Dillon Varone
[Description] Prefetch calculation loop was not exiting until utilizing all of vstartup if it failed once. Locals need to be reset on each iteration of the loop. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amd/display: Fix optc2_configure warning on dcn314Roman Li
[Why] dcn314 uses optc2_configure_crc() that wraps optc1_configure_crc() + set additional registers not applicable to dcn314. It's not critical but when used leads to warning like: WARNING: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c Call Trace: <TASK> generic_reg_set_ex+0x6d/0xe0 [amdgpu] optc2_configure_crc+0x60/0x80 [amdgpu] dc_stream_configure_crc+0x129/0x150 [amdgpu] amdgpu_dm_crtc_configure_crc_source+0x5d/0xe0 [amdgpu] [How] Use optc1_configure_crc() directly Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amd/display: Fix calculation for cursor CAB allocationGeorge Shen
[Why] The cursor size (in memory) is currently incorrectly calculated, resulting not enough CAB being allocated for static screen cursor in MALL refresh. This results in cursor image corruption. [How] Use cursor pitch instead of cursor width when calculating cursor size. Update num cache lines calculation to use the result of the cursor size calculation instead of manually recalculating again. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL"Simon Ser
This reverts commit 981f09295687f856d5345e19c7084aca481c1395. It turns out this causes logically active but disconnected DP MST connectors to disappear from the KMS resources list, and Mutter then assumes the connector is already disabled. Later on Mutter tries to re-use the same CRTC but fails since on the kernel side it's still tied to the disconnected DP MST connector. Signed-off-by: Simon Ser <contact@emersion.fr> Tested-by: Jonas Ådahl <jadahl@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20221017153150.60675-1-contact@emersion.fr
2022-11-15drm/amd/display: Support parsing VRAM info v3.0 from VBIOSGeorge Shen
[Why] For DCN3.2 and DCN3.21, VBIOS has switch to using v3.0 of the VRAM info struct. We should read and override the VRAM info in driver with values provided by VBIOS to support memory downbin cases. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15x86/cpu: Restore AMD's DE_CFG MSR after resumeBorislav Petkov
DE_CFG contains the LFENCE serializing bit, restore it on resume too. This is relevant to older families due to the way how they do S3. Unify and correct naming while at it. Fixes: e4d0e84e4907 ("x86/cpu/AMD: Make LFENCE a serializing instruction") Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com> Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-11-15drm/amd/display: Fix invalid DPIA AUX reply causing system hangStylon Wang
[Why] Some DPIA AUX replies have incorrect data length from original request. This could lead to overwriting of destination buffer if reply length is larger, which could cause invalid access to stack since many destination buffers are declared as local variables. [How] Check for invalid length from DPIA AUX replies and trigger a retry if reply length is not the same as original request. A DRM_WARN() dmesg log is also produced. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amdgpu: Add psp_13_0_10_ta firmware to modinfoCandice Li
TA firmware loaded on psp v13_0_10, but it is missing in modinfo. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Add HUBP surface flip interrupt handlerRodrigo Siqueira
On IGT, there is a test named amd_hotplug, and when the subtest basic is executed on DCN31, we get the following error: [drm] *ERROR* [CRTC:71:crtc-0] flip_done timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CRTC:71:crtc-0] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CONNECTOR:88:DP-1] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [PLANE:59:plane-3] commit wait timed out After enable the page flip log with the below command: echo -n 'format "[PFLIP]" +p' > /sys/kernel/debug/dynamic_debug/control It is possible to see that the flip was submitted, but DC never replied back, which generates time-out issues. This is an indication that the HUBP surface flip is missing. This commit fixes this issue by adding hubp1_set_flip_int to DCN31. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-15drm/amd/display: Fix access timeout to DPIA AUX at boot timeStylon Wang
[Why] Since introduction of patch "Query DPIA HPD status.", link detection at boot could be accessing DPIA AUX, which will not succeed until DMUB outbox messaging is enabled and results in below dmesg logs: [ 160.840227] [drm:amdgpu_dm_process_dmub_aux_transfer_sync [amdgpu]] *ERROR* wait_for_completion_timeout timeout! [How] Enable DMUB outbox messaging before link detection at boot time. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amdgpu: Fix memory leak in amdgpu_cs_pass1Dong Chenchen
When p->gang_size equals 0, amdgpu_cs_pass1() will return directly without freeing chunk_array, which will cause a memory leak issue, this patch fixes it. Fixes: 4624459c84d7 ("drm/amdgpu: add gang submit frontend v6") Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360Takashi Iwai
Samsung Galaxy Book Pro 360 (13" 2021 NP930QBD-ke1US) with codec SSID 144d:c1a6 requires the same workaround for enabling the speaker amp like other Samsung models with ALC298 codec. Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1205100 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221115170235.18875-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-11-15ALSA: hda/realtek: fix speakers for Samsung Galaxy Book ProEmil Flink
The Samsung Galaxy Book Pro seems to have the same issue as a few other Samsung laptops, detailed in kernel bug report 207423. Sound from headphone jack works, but not the built-in speakers. alsa-info: http://alsa-project.org/db/?f=b40ba609dc6ae28dc84ad404a0d8a4bbcd8bea6d Signed-off-by: Emil Flink <emil.flink@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221115144500.7782-1-emil.flink@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-11-15netfs: Fix dodgy mathsDavid Howells
Fix the dodgy maths in netfs_rreq_unlock_folios(). start_page could be inside the folio, in which case the calculation of pgpos will be come up with a negative number (though for the moment rreq->start is rounded down earlier and folios would have to get merged whilst locked) Alter how this works to just frame the tracking in terms of absolute file positions, rather than offsets from the start of the I/O request. This simplifies the maths and makes it easier to follow. Fix the issue by using folio_pos() and folio_size() to calculate the end position of the page. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Reported-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/Y2SJw7w1IsIik3nb@casper.infradead.org/ Link: https://lore.kernel.org/r/166757988611.950645.7626959069846893164.stgit@warthog.procyon.org.uk/ # v2
2022-11-15drm/amd/display: Support parsing VRAM info v3.0 from VBIOSGeorge Shen
[Why] For DCN3.2 and DCN3.21, VBIOS has switch to using v3.0 of the VRAM info struct. We should read and override the VRAM info in driver with values provided by VBIOS to support memory downbin cases. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: use low clocks for no plane configsDmytro Laktyushkin
Stream only configurations do not require DCFCLK, SOCCLK, DPPCLK or FCLK. They also always allow pstate change. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Use min transition for all SubVP plane add/removeAlvin Lee
[Description] - Whenever disabling a phantom pipe, we must run through the minimal transition sequence - In the case where SetVisibility = false for the main pipe, we also need to run through the min transtion when disabling the phantom pipes Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Program pipes for ODM when removing planesDillon Varone
[WHY?] Software state expects pipes to be configured for ODM, but due to the transition occurring on a plane disable, the ODM enablement code is not run. [HOW?] Update ODM when removing a plane, and dynamic ODM is active. Also acquire pipe lock when removing a plane. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: clean up some irq service code for dcn201Liu Xi
[Why and how] Clean up some irq service code for dcn201. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Liu Xi <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Update SubVP Visual ConfirmDavid Galiffi
[Why] The visual confirm bar is displayed on all displays, but is only updated on a flip. If an update causes SubVP to be disabled on all displays, but there are no updates on the other displays, it will lead to stale information displayed on the non-active displays. An example of this is playing a fullscreen video on a rotated display. [How] Add a procedure to update visual confirm color for all pipes when committing a plane. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: fix dpms_off issue when disabling bios modeZhongwei Zhang
[Why] disable_vbios_mode_if_required() will set dpms_off to false during boot when pixel clk dismatches with driver requires. This will cause extra backlight on and off if OS call 2 times setmode. [How] Set dpms_off to true to keep power_off and let OS control BL by display's powerState. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix invalid DPIA AUX reply causing system hangStylon Wang
[Why] Some DPIA AUX replies have incorrect data length from original request. This could lead to overwriting of destination buffer if reply length is larger, which could cause invalid access to stack since many destination buffers are declared as local variables. [How] Check for invalid length from DPIA AUX replies and trigger a retry if reply length is not the same as original request. A DRM_WARN() dmesg log is also produced. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amdgpu: Add psp_13_0_10_ta firmware to modinfoCandice Li
TA firmware loaded on psp v13_0_10, but it is missing in modinfo. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Add HUBP surface flip interrupt handlerRodrigo Siqueira
On IGT, there is a test named amd_hotplug, and when the subtest basic is executed on DCN31, we get the following error: [drm] *ERROR* [CRTC:71:crtc-0] flip_done timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CRTC:71:crtc-0] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CONNECTOR:88:DP-1] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [PLANE:59:plane-3] commit wait timed out After enable the page flip log with the below command: echo -n 'format "[PFLIP]" +p' > /sys/kernel/debug/dynamic_debug/control It is possible to see that the flip was submitted, but DC never replied back, which generates time-out issues. This is an indication that the HUBP surface flip is missing. This commit fixes this issue by adding hubp1_set_flip_int to DCN31. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix access timeout to DPIA AUX at boot timeStylon Wang
[Why] Since introduction of patch "Query DPIA HPD status.", link detection at boot could be accessing DPIA AUX, which will not succeed until DMUB outbox messaging is enabled and results in below dmesg logs: [ 160.840227] [drm:amdgpu_dm_process_dmub_aux_transfer_sync [amdgpu]] *ERROR* wait_for_completion_timeout timeout! [How] Enable DMUB outbox messaging before link detection at boot time. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amdgpu: clarify DC checksAlex Deucher
There are several places where we don't want to check if a particular asic could support DC, but rather, if DC is enabled. Set a flag if DC is enabled and check for that rather than if a device supports DC or not. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: move non-DC vblank handling out of irq codeAlex Deucher
Move it into the DCE code for each generation. This avoids confusion with the different display paths. v2: no need for a hotplug worker for vkms Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: rework SR-IOV virtual display handlingAlex Deucher
virtual display is enabled unconditionally in SR-IOV, but without specifying the virtual_display module, the number of crtcs defaults to 0. Set a single display by default for SR-IOV if the virtual_display parameter is not set. Only enable virtual display by default on SR-IOV on asics which actually have display hardware. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: use proper DC check in amdgpu_display_supported_domains()Alex Deucher
amdgpu_device_asic_has_dc_support() just checks the asic itself. amdgpu_device_has_dc_support() is a runtime check which not only checks the asic, but also other things in the driver like whether virtual display is enabled. We want the latter here. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: Remove programming GCMC_VM_FB_LOCATION* on gfxhub_v3_0_3 in VFYifan Zha
[Why] GCMC_VM related registers should be programmed by PSP on host side. L1 and RLCG will block these regisers on VF. [How] Remove programming GCMC_VM_FB_LOCATION_BASE/TOP on gfxhub_v3_0_3 under SRIOV VF. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: Stop clearing kiq position during unloadYuBiao Wang
Do not clear kiq position in RLC_CP_SCHEDULER so that CP could perform IDLE-SAVE after VF fini. CPG also needs to be active in save command. v2: drop unused variable (Alex) Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-12 11:43:20 +0000