summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-21isofs: reject hardware sector size > 2048 bytesEric Sandeen
The largest block size supported by isofs is ISOFS_BLOCK_SIZE (2048), but isofs_fill_super calls sb_min_blocksize and sets the blocksize to the device's logical block size if it's larger than what we ended up with after option parsing. If for some reason we try to mount a hard 4k device as an isofs filesystem, we'll set opt.blocksize to 4096, and when we try to read the superblock we found via: block = iso_blknum << (ISOFS_BLOCK_BITS - s->s_blocksize_bits) with s_blocksize_bits greater than ISOFS_BLOCK_BITS, we'll have a negative shift and the bread will fail somewhat cryptically: isofs_fill_super: bread failed, dev=sda, iso_blknum=17, block=-2147483648 It seems best to just catch and clearly reject mounts of such a device. Reported-by: Bryan Gurney <bgurney@redhat.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-08-21microblaze/PCI: Remove stale pcibios_align_resource() commentLorenzo Pieralisi
commit 01cf9d524ff0 ("microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driver") and commit ecf677c8dcaa ("PCI: Add a generic weak pcibios_align_resource()") first patched then removed pcibios_align_resource() from the microblaze architecture code but failed to remove the comment that was added to it. Remove it since it has now become stale and it is quite confusing. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bharat Kumar Gogada <bharatku@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-20f2fs: readahead encrypted block during GCChao Yu
During GC, for each encrypted block, we will read block synchronously into meta page, and then submit it into current cold data log area. So this block read model with 4k granularity can make poor performance, like migrating non-encrypted block, let's readahead encrypted block as well to improve migration performance. To implement this, we choose meta page that its index is old block address of the encrypted block, and readahead ciphertext into this page, later, if readaheaded page is still updated, we will load its data into target meta page, and submit the write IO. Note that for OPU, truncation, deletion, we need to invalid meta page after we invalid old block address, to make sure we won't load invalid data from target meta page during encrypted block migration. for ((i = 0; i < 1000; i++)) do { xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync"; } done for ((i = 0; i < 1000; i+=2)) do { rm /mnt/f2fs/dir/$i; } done ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0); Before: gc-6549 [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc] gc-6549 [001] d..1 214682.212802: block_unplug: [gc] 1 gc-6549 [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc] gc-6549 [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc] gc-6549 [001] .... 214682.213902: block_plug: [gc] gc-6549 [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc] gc-6549 [001] d..1 214682.213908: block_unplug: [gc] 1 gc-6549 [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc] gc-6549 [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc] gc-6549 [001] .... 214682.226414: block_plug: [gc] gc-6549 [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc] gc-6549 [001] d..1 214682.226420: block_unplug: [gc] 1 gc-6549 [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc] gc-6549 [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc] gc-6549 [001] .... 214682.226911: block_plug: [gc] gc-6549 [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc] gc-6549 [001] d..1 214682.226916: block_unplug: [gc] 1 After: gc-5678 [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc] gc-5678 [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc] gc-5678 [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc] gc-5678 [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc] gc-5678 [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc] gc-5678 [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc] gc-5678 [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc] gc-5678 [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc] gc-5678 [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc] gc-5678 [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc] gc-5678 [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc] gc-5678 [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc] gc-5678 [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc] gc-5678 [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc] gc-5678 [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc] gc-5678 [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc] gc-5678 [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc] gc-5678 [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc] gc-5678 [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc] gc-5678 [003] d..1 214327.026023: block_unplug: [gc] 1 gc-5678 [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc] gc-5678 [003] .... 214327.026046: block_plug: [gc] Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-20f2fs: avoid fi->i_gc_rwsem[WRITE] lock in f2fs_gcJaegeuk Kim
The f2fs_gc() called by f2fs_balance_fs() requires to be called outside of fi->i_gc_rwsem[WRITE], since f2fs_gc() can try to grab it in a loop. If it hits the miximum retrials in GC, let's give a chance to release gc_mutex for a short time in order not to go into live lock in the worst case. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-20f2fs: fix performance issue observed with multi-thread sequential readJaegeuk Kim
This reverts the commit - "b93f771 - f2fs: remove writepages lock" to fix the drop in sequential read throughput. Test: ./tiotest -t 32 -d /data/tio_tmp -f 32 -b 524288 -k 1 -k 3 -L device: UFS Before - read throughput: 185 MB/s total read requests: 85177 (of these ~80000 are 4KB size requests). total write requests: 2546 (of these ~2208 requests are written in 512KB). After - read throughput: 758 MB/s total read requests: 2417 (of these ~2042 are 512KB reads). total write requests: 2701 (of these ~2034 requests are written in 512KB). Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-21powerpc/topology: Get topology for shared processors at bootSrikar Dronamraju
On a shared LPAR, Phyp will not update the CPU associativity at boot time. Just after the boot system does recognize itself as a shared LPAR and trigger a request for correct CPU associativity. But by then the scheduler would have already created/destroyed its sched domains. This causes - Broken load balance across Nodes causing islands of cores. - Performance degradation esp if the system is lightly loaded - dmesg to wrongly report all CPUs to be in Node 0. - Messages in dmesg saying borken topology. - With commit 051f3ca02e46 ("sched/topology: Introduce NUMA identity node sched domain"), can cause rcu stalls at boot up. The sched_domains_numa_masks table which is used to generate cpumasks is only created at boot time just before creating sched domains and never updated. Hence, its better to get the topology correct before the sched domains are created. For example on 64 core Power 8 shared LPAR, dmesg reports Brought up 512 CPUs Node 0 CPUs: 0-511 Node 1 CPUs: Node 2 CPUs: Node 3 CPUs: Node 4 CPUs: Node 5 CPUs: Node 6 CPUs: Node 7 CPUs: Node 8 CPUs: Node 9 CPUs: Node 10 CPUs: Node 11 CPUs: ... BUG: arch topology borken the DIE domain not a subset of the NUMA domain BUG: arch topology borken the DIE domain not a subset of the NUMA domain numactl/lscpu output will still be correct with cores spreading across all nodes: Socket(s): 64 NUMA node(s): 12 Model: 2.0 (pvr 004d 0200) Model name: POWER8 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 64K L1i cache: 32K NUMA node0 CPU(s): 0-7,32-39,64-71,96-103,176-183,272-279,368-375,464-471 NUMA node1 CPU(s): 8-15,40-47,72-79,104-111,184-191,280-287,376-383,472-479 NUMA node2 CPU(s): 16-23,48-55,80-87,112-119,192-199,288-295,384-391,480-487 NUMA node3 CPU(s): 24-31,56-63,88-95,120-127,200-207,296-303,392-399,488-495 NUMA node4 CPU(s): 208-215,304-311,400-407,496-503 NUMA node5 CPU(s): 168-175,264-271,360-367,456-463 NUMA node6 CPU(s): 128-135,224-231,320-327,416-423 NUMA node7 CPU(s): 136-143,232-239,328-335,424-431 NUMA node8 CPU(s): 216-223,312-319,408-415,504-511 NUMA node9 CPU(s): 144-151,240-247,336-343,432-439 NUMA node10 CPU(s): 152-159,248-255,344-351,440-447 NUMA node11 CPU(s): 160-167,256-263,352-359,448-455 Currently on this LPAR, the scheduler detects 2 levels of Numa and created numa sched domains for all CPUs, but it finds a single DIE domain consisting of all CPUs. Hence it deletes all numa sched domains. To address this, detect the shared processor and update topology soon after CPUs are setup so that correct topology is updated just before scheduler creates sched domain. With the fix, dmesg reports: numa: Node 0 CPUs: 0-7 32-39 64-71 96-103 176-183 272-279 368-375 464-471 numa: Node 1 CPUs: 8-15 40-47 72-79 104-111 184-191 280-287 376-383 472-479 numa: Node 2 CPUs: 16-23 48-55 80-87 112-119 192-199 288-295 384-391 480-487 numa: Node 3 CPUs: 24-31 56-63 88-95 120-127 200-207 296-303 392-399 488-495 numa: Node 4 CPUs: 208-215 304-311 400-407 496-503 numa: Node 5 CPUs: 168-175 264-271 360-367 456-463 numa: Node 6 CPUs: 128-135 224-231 320-327 416-423 numa: Node 7 CPUs: 136-143 232-239 328-335 424-431 numa: Node 8 CPUs: 216-223 312-319 408-415 504-511 numa: Node 9 CPUs: 144-151 240-247 336-343 432-439 numa: Node 10 CPUs: 152-159 248-255 344-351 440-447 numa: Node 11 CPUs: 160-167 256-263 352-359 448-455 and lscpu also reports: Socket(s): 64 NUMA node(s): 12 Model: 2.0 (pvr 004d 0200) Model name: POWER8 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 64K L1i cache: 32K NUMA node0 CPU(s): 0-7,32-39,64-71,96-103,176-183,272-279,368-375,464-471 NUMA node1 CPU(s): 8-15,40-47,72-79,104-111,184-191,280-287,376-383,472-479 NUMA node2 CPU(s): 16-23,48-55,80-87,112-119,192-199,288-295,384-391,480-487 NUMA node3 CPU(s): 24-31,56-63,88-95,120-127,200-207,296-303,392-399,488-495 NUMA node4 CPU(s): 208-215,304-311,400-407,496-503 NUMA node5 CPU(s): 168-175,264-271,360-367,456-463 NUMA node6 CPU(s): 128-135,224-231,320-327,416-423 NUMA node7 CPU(s): 136-143,232-239,328-335,424-431 NUMA node8 CPU(s): 216-223,312-319,408-415,504-511 NUMA node9 CPU(s): 144-151,240-247,336-343,432-439 NUMA node10 CPU(s): 152-159,248-255,344-351,440-447 NUMA node11 CPU(s): 160-167,256-263,352-359,448-455 Reported-by: Manjunatha H R <manjuhr1@in.ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> [mpe: Trim / format change log] Tested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-21powerpc64/ftrace: Include ftrace.h needed for enable/disable callsLuke Dashjr
this_cpu_disable_ftrace and this_cpu_enable_ftrace are inlines in ftrace.h Without it included, the build fails. Fixes: a4bc64d305af ("powerpc64/ftrace: Disable ftrace during kvm entry/exit") Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Luke Dashjr <luke-jr+git@utopios.org> Acked-by: Naveen N. Rao <naveen.n.rao at linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-20Merge tag 'please-pull-noboot' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 NO_BOOTMEM conversion from Tony Luck: "Mike Rapoport kindly fixed up ia64 to work with NO_BOOTMEM" * tag 'please-pull-noboot' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64: switch to NO_BOOTMEM ia64: use mem_data to detect nodes' minimal and maximal PFNs ia64: remove unused num_dma_physpages member from 'struct early_node_data' ia64: contig/paging_init: reduce code duplication
2018-08-20rhashtable: remove duplicated include from rhashtable.cYue Haibing
Remove duplicated include. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-20Merge tag 'linux-kselftest-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest update from Shuah Khan: - add cgroup core selftests - fix compile warnings in android ion test - fix to bugs in exclude and skip paths in vDSO test - remove obsolete config options - add missing .gitignore file * tag 'linux-kselftest-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Fix kprobe string testcase to not probe notrace function selftests: mount: remove no longer needed config option selftests: cgroup: add gitignore file Add cgroup core selftests selftests: vDSO - fix to return KSFT_SKIP when test couldn't be run selftests: vDSO - fix to exclude x86 test on non-x86 platforms selftests/android: initialize heap_type to avoid compiling warning
2018-08-20Merge tag 'trace-v4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Restructure of lockdep and latency tracers This is the biggest change. Joel Fernandes restructured the hooks from irqs and preemption disabling and enabling. He got rid of a lot of the preprocessor #ifdef mess that they caused. He turned both lockdep and the latency tracers to use trace events inserted in the preempt/irqs disabling paths. But unfortunately, these started to cause issues in corner cases. Thus, parts of the code was reverted back to where lockdep and the latency tracers just get called directly (without using the trace events). But because the original change cleaned up the code very nicely we kept that, as well as the trace events for preempt and irqs disabling, but they are limited to not being called in NMIs. - Have trace events use SRCU for "rcu idle" calls. This was required for the preempt/irqs off trace events. But it also had to not allow them to be called in NMI context. Waiting till Paul makes an NMI safe SRCU API. - New notrace SRCU API to allow trace events to use SRCU. - Addition of mcount-nop option support - SPDX headers replacing GPL templates. - Various other fixes and clean ups. - Some fixes are marked for stable, but were not fully tested before the merge window opened. * tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) tracing: Fix SPDX format headers to use C++ style comments tracing: Add SPDX License format tags to tracing files tracing: Add SPDX License format to bpf_trace.c blktrace: Add SPDX License format header s390/ftrace: Add -mfentry and -mnop-mcount support tracing: Add -mcount-nop option support tracing: Avoid calling cc-option -mrecord-mcount for every Makefile tracing: Handle CC_FLAGS_FTRACE more accurately Uprobe: Additional argument arch_uprobe to uprobe_write_opcode() Uprobes: Simplify uprobe_register() body tracepoints: Free early tracepoints after RCU is initialized uprobes: Use synchronize_rcu() not synchronize_sched() tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister() ftrace: Remove unused pointer ftrace_swapper_pid tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing/irqsoff: Handle preempt_count for different configs tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing: irqsoff: Account for additional preempt_disable trace: Use rcu_dereference_raw for hooks from trace-event subsystem tracing/kprobes: Fix within_notrace_func() to check only notrace functions ...
2018-08-20Merge tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The main things are support for cephx v2 authentication protocol and basic support for rbd images within namespaces (myself). Also included are y2038 conversion patches from Arnd, a pile of miscellaneous fixes from Chengguang and Zheng's feature bit infrastructure for the filesystem" * tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits) ceph: don't drop message if it contains more data than expected ceph: support cephfs' own feature bits crush: fix using plain integer as NULL warning libceph: remove unnecessary non NULL check for request_key ceph: refactor error handling code in ceph_reserve_caps() ceph: refactor ceph_unreserve_caps() ceph: change to void return type for __do_request() ceph: compare fsc->max_file_size and inode->i_size for max file size limit ceph: add additional size check in ceph_setattr() ceph: add additional offset check in ceph_write_iter() ceph: add additional range check in ceph_fallocate() ceph: add new field max_file_size in ceph_fs_client libceph: weaken sizeof check in ceph_x_verify_authorizer_reply() libceph: check authorizer reply/challenge length before reading libceph: implement CEPHX_V2 calculation mode libceph: add authorizer challenge libceph: factor out encrypt_authorizer() libceph: factor out __ceph_x_decrypt() libceph: factor out __prepare_write_connect() libceph: store ceph_auth_handshake pointer in ceph_connection ...
2018-08-20net/ipv6: Put lwtstate when destroying fib6_infoDavid Ahern
Prior to the introduction of fib6_info lwtstate was managed by the dst code. With fib6_info releasing lwtstate needs to be done when the struct is freed. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-20Merge tag 'rtc-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "It is now possible to add custom sysfs attributes while avoiding a possible race condition. Unused code has been removed resulting in a nice reduction of the code base. And more drivers have been switched to SPDX by their maintainers. Summary: Subsystem: - new helpers to add custom sysfs attributes - struct rtc_task removal along with rtc_irq_[un]register() - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore Drivers: - armada38x: reset after rtc power loss - ds1307: now supports m41t11 - isl1208: now supports isl1219 and tamper detection - pcf2127: internal SRAM support" * tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits) rtc: ds1307: simplify hwmon config rtc: s5m: Add SPDX license identifier rtc: maxim: Add SPDX license identifiers rtc: isl1219: add device tree documentation rtc: isl1208: set ev-evienb bit from device tree rtc: isl1208: Add "evdet" interrupt source for isl1219 rtc: isl1208: add support for isl1219 with tamper detection rtc: sysfs: facilitate attribute add to rtc device rtc: remove struct rtc_task char: rtc: remove task handling rtc: pcf85063: preserve control register value between stop and start rtc: sh: remove unused variable rtc_dev rtc: unexport rtc_irq_set_* rtc: simplify rtc_irq_set_state/rtc_irq_set_freq rtc: remove irq_task and irq_task_lock rtc: remove rtc_irq_register/rtc_irq_unregister rtc: sh: remove dead code rtc: sa1100: don't set PIE frequency rtc: ds1307: support m41t11 variant rtc: ds1307: fix data pointer to m41t0 ...
2018-08-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching updates from Jiri Kosina: "Code cleanups from Kamalesh Babulal" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Validate module/old func name length livepatch: Remove reliable stacktrace check in klp_try_switch_task()
2018-08-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - touch_max detection improvements and quirk handling fixes in wacom driver from Jason Gerecke and Ping Cheng - Palm rejection from Dmitry Torokhov and _dial support from Benjamin Tissoires for hid-multitouch driver - Low voltage support for i2c-hid driver from Stephen Boyd - Guitar-Hero support from Nicolas Adenis-Lamarre - other assorted small fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (40 commits) HID: intel_ish-hid: tx_buf memory leak on probe/remove HID: intel-ish-hid: Prevent loading of driver on Mehlow HID: cougar: Add support for the Cougar 500k Gaming Keyboard HID: cougar: make compare_device_paths reusable HID: intel-ish-hid: remove redundant variable num_frags HID: multitouch: handle palm for touchscreens HID: multitouch: touchscreens also use confidence reports HID: multitouch: report MT_TOOL_PALM for non-confident touches HID: microsoft: support the Surface Dial HID: core: do not upper bound the collection stack HID: input: enable Totem on the Dell Canvas 27 HID: multitouch: remove one copy of values HID: multitouch: ditch mt_report_id HID: multitouch: store a per application quirks value HID: multitouch: Store per collection multitouch data HID: multitouch: make sure the static list of class is not changed input: add MT_TOOL_DIAL HID: elan: Add support for touchpad on the Toshiba Click Mini L9W HID: elan: Add USB-id for HP x2 10-n000nd touchpad HID: elan: Add a flag for selecting if the touchpad has a LED ...
2018-08-20Merge tag 'backlight-next-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Core Framework: - Remove unused/obsolete code/comments New Functionality: - Allow less granular brightness specification for high-res PWMs; pwm_bl - Align brightness {inc,dec}rements with that perceived by the human-eye; pwm_bl Fix-ups: - Prepare for the introduction of -Wimplicit-fall-through; adp8860_bl Bug Fixes: - Fix uninitialised variable; pwm_bl" * tag 'backlight-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Fix uninitialized variable backlight: adp8860: Mark expected switch fall-through backlight: Remove obsolete comment for ->state dt-bindings: pwm-backlight: Move brightness-levels to optional backlight: pwm_bl: Compute brightness of LED linearly to human eye dt-bindings: pwm-backlight: Add a num-interpolation-steps property backlight: pwm_bl: Linear interpolation between brightness-levels
2018-08-20Merge tag 'mfd-next-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...
2018-08-20Merge tag 'edac_fixes_for_4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fix from Borislav Petkov: "An urgent fix for a NULL ptr deref on machines with LRDDR4 DIMMs, from Takashi Iwai" * tag 'edac_fixes_for_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Add missing MEM_LRDDR4 entry in edac_mem_types[]
2018-08-20Raise the minimum required gcc version to 4.6Joe Perches
Various architectures fail to build properly with older versions of the gcc compiler. An example from Guenter Roeck in thread [1]: > > In file included from ./include/linux/mm.h:17:0, > from ./include/linux/pid_namespace.h:7, > from ./include/linux/ptrace.h:10, > from arch/openrisc/kernel/asm-offsets.c:32: > ./include/linux/mm_types.h:497:16: error: flexible array member in otherwise empty struct > > This is just an example with gcc 4.5.1 for or32. I have seen the problem > with gcc 4.4 (for unicore32) as well. So update the minimum required version of gcc to 4.6. [1] https://lore.kernel.org/lkml/20180814170904.GA12768@roeck-us.net/ Miscellanea: - Update Documentation/process/changes.rst - Remove and consolidate version test blocks in compiler-gcc.h for versions lower than 4.6 Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-20Merge branch 'xtensa-dma-fixes' (early part) into xtensa-fixesMax Filippov
This switches xtensa arch to the generic noncoherent direct mapping operations, adds support for DMA_ATTR_NO_KERNEL_MAPPING attribute and allows for platform-specific handling of coherent memory. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20r8152: disable RX aggregation on new Dell TB16 dockKai-Heng Feng
There's a new Dell TB16 dock with a different iSerialNumber. Apply the same fix from commit 0b1655143df0 ("r8152: disable RX aggregation on Dell TB16 dock") to this model. BugLink: https://bugs.launchpad.net/bugs/1785780 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-20xtensa: add test_kc705_be variantMax Filippov
test_kc705_be is a big-endian Xtensa core with HiFi2 instructions. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20xtensa: clean up boot-elf/bootstrap.SMax Filippov
Drop unneeded headers, rewrite literal definitions with .literal. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20xtensa: make bootparam parsing optionalMax Filippov
A kernel may not need any boot parameters from the bootloader, allow disabling bootparam parsing in that case. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20xtensa: drop variant IRQ supportMax Filippov
If an xtensa core provides an additional IRQ controller it should be treated as a separate piece of hardware and be driven by an irqchip driver. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20xtensa: drop unneeded platform/hardware.h headersMax Filippov
platform/hardware.h no longer supply any information for processor.h, vectors.h, setup.c or vmlinux.lds.S, don't include it. This header is now empty in the platforms/iss, so remove it altogether. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20xtensa: move PLATFORM_NR_IRQS to KconfigMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20xtensa: rework {CONFIG,PLATFORM}_DEFAULT_MEM_STARTMax Filippov
Drop PLATFORM_DEFAULT_MEM_START from the platform/hardware.h headers. Provide definition of CONFIG_DEFAULT_MEM_START always, allow changing it only in noMMU configurations when PLATFORM_WANT_DEFAULT_MEM is selected. Change prompt and description so that it's clear that it controls PAGE_OFFSET and PHYS_OFFSET. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20xtensa: drop unused {CONFIG,PLATFORM}_DEFAULT_MEM_SIZEMax Filippov
Now that noMMU cache attributes are set up separately drop no longer used macro PLATFORM_DEFAULT_MEM_SIZE and config symbol CONFIG_DEFAULT_MEM_SIZE used for setting it. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20ia64: Fix kernel BUG at lib/ioremap.c:72!Tony Luck
Commit 0bbf47eab469 ("ia64: use asm-generic/io.h") results in a BUG while booting ia64. This is because asm-generic/io.h defines PCI_IOBASE, which results in the function acpi_pci_root_remap_iospace() doing a lot of unnecessary (and wrong) things. I'd suggested an #if !CONFIG_IA64 in the functon, but Arnd suggested keeping the fix inside the arch/ia64 tree. Fixes: 0bbf47eab469 ("ia64: use asm-generic/io.h") Suggested-by: Arnd Bergman <arnd@arndb.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-20thermal: of-thermal: disable passive polling when thermal zone is disabledAnson Huang
When thermal zone is in passive mode, disabling its mode from sysfs is NOT taking effect at all, it is still polling the temperature of the disabled thermal zone and handling all thermal trips, it makes user confused. The disabling operation should disable the thermal zone behavior completely, for both active and passive mode, this patch clears the passive_delay when thermal zone is disabled and restores it when it is enabled. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-08-20x86/xen: enable early use of set_fixmap in 32-bit Xen PV guestJuergen Gross
Commit 7b25b9cb0dad83 ("x86/xen/time: Initialize pv xen time in init_hypervisor_platform()") moved the mapping of the shared info area before pagetable_init(). This breaks booting as 32-bit PV guest as the use of set_fixmap isn't possible at this time on 32-bit. This can be worked around by populating the needed PMD on 32-bit kernel earlier. In order not to reimplement populate_extra_pte() using extend_brk() for allocating new page tables extend alloc_low_pages() to do that in case the early page table pool is not yet available. Fixes: 7b25b9cb0dad83 ("x86/xen/time: Initialize pv xen time in init_hypervisor_platform()") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20xen: remove unused hypercall functionsJuergen Gross
Remove Xen hypercall functions which are used nowhere in the kernel. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20x86/xen: remove unused function xen_auto_xlated_memory_setup()Juergen Gross
xen_auto_xlated_memory_setup() is a leftover from PVH V1. Remove it. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20xen/ACPI: don't upload Px/Cx data for disabled processorsJan Beulich
This is unnecessary and triggers a warning in the hypervisor. Often systems have more processor entries in their ACPI tables than are actually installed/active. The ACPI_STA_DEVICE_PRESENT bit cannot be reliably used, but the ACPI_MADT_ENABLED bit can. In order to not introduce new functions in the main ACPI processor driver code, simply use acpi_get_phys_id(), which does more than we need, but which checks the MADT enabled bit in the process. Any CPU for which we can't determine the APIC ID is unlikely to work properly anyway, so the extra checks done by acpi_get_phys_id() should do no harm. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20x86/Xen: further refine add_preferred_console() invocationsJan Beulich
As the sequence of invocations matters, add "tty" only after "hvc" when a VGA console is available (which is often the case for Dom0, but hardly ever for DomU). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20xen/mcelog: eliminate redundant setting of interface versionJan Beulich
This already gets done in HYPERVISOR_mca(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20x86/Xen: mark xen_setup_gdt() __initJan Beulich
Its only caller is __init, so to avoid section mismatch warnings when a compiler decides to not inline the function marke this function so as well. Take the opportunity and also make the function actually use its argument: The sole caller passes in zero anyway. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20thermal: rcar_gen3_thermal: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-08-20thermal: rcar_thermal: convert to SPDX identifiersKuninori Morimoto
As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-08-20Merge branch 'qed-Misc-fixes-in-the-interface-with-the-MFW'David S. Miller
Tomer Tayar says: ==================== qed: Misc fixes in the interface with the MFW This patch series fixes several issues in the driver's interface with the management FW (MFW). v1->v2: - Fix loop counter decrement to be pre instead of post. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-20qed: Avoid sending mailbox commands when MFW is not responsiveTomer Tayar
Keep sending mailbox commands to the MFW when it is not responsive ends up with a redundant amount of timeout expiries. This patch prints the MCP status on the first command which is not responded, and blocks the following commands. Since the (un)load request commands might be not responded due to other PFs, the patch also adds the option to skip the blocking upon a failure. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-20qed: Prevent a possible deadlock during driver load and unloadTomer Tayar
The MFW manages an internal lock to prevent concurrent hardware (de)initialization of different PFs. This, together with the busy-waiting for the MFW's responses for commands, might lead to a deadlock during concurrent load or unload of PFs. This patch adds the option to sleep within the busy-waiting, and uses it for the (un)load requests (which are not sent from an interrupt context) to prevent the possible deadlock. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-20qed: Wait for MCP halt and resume commands to take placeTomer Tayar
Successive iterations of halting and resuming the management chip (MCP) might fail, since currently the driver doesn't wait for these operations to actually take place. This patch prevents the driver from moving forward before the operations are reflected in the state register. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-20qed: Wait for ready indication before rereading the shmemTomer Tayar
The MFW might be reset and re-update its shared memory. Upon the detection of such a reset the driver rereads this memory, but it has to wait till the data is valid. This patch adds the missing wait for a data ready indication. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-20thermal: qoriq: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-08-20RISC-V: Fix sys_riscv_flush_icachePalmer Dabbelt
This contains a pair of patches that together fix sys_riscv_flush_icache on all systems: * The first enables sys_riscv_flush_icache() for non-SMP systems. * The second fixes a bug in our syscall header that caused sys_riscv_flush_icache to never get generated.
2018-08-20thermal: qoriq: Simplify the 'site' variable assignmentFabio Estevam
There is no need to assign zero to the variable 'site' and then perform a compound bitwise OR operation afterwards. Make it simpler by assigning the final 'site' value directly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-08-20thermal: qoriq: Use devm_thermal_zone_of_sensor_register()Fabio Estevam
By using the managed devm_thermal_zone_of_sensor_register() we can drop the explicit call to thermal_zone_of_sensor_unregister() in the qoriq_tmu_remove() function, which simplifies the code a bit. So switch to devm_thermal_zone_of_sensor_register(). Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-12 16:39:09 +0000