| Age | Commit message (Collapse) | Author |
|---|
|
In preparation for subsequent changes, move the power.completion
reinitialization along with clearing power.work_in_progress into a
separate function called dpm_clear_async_state() and rearrange
dpm_async_fn() to get rid of unnecessary indentation.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/8494650.T7Z3S40VBb@rjwysocki.net
|
|
Rename the async_in_progress field in struct dev_pm_info to
work_in_progress as after subsequent changes it will mean work in
general rather than just async work.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3338693.aeNJFYEL58@rjwysocki.net
|
|
Modify pm_runtime_block_if_disabled() to return true when runtime PM
is disabled for the device, regardless of the power.last_status value.
This effectively prevents "smart suspend" from being enabled for
devices with runtime PM disabled in device_prepare(), even transiently,
so update the related comment in that function accordingly.
If a device has runtime PM disabled in device_prepare(), it is not
actually known whether or not runtime PM will be enabled for that
device going forward, so it is more appropriate to postpone the
"smart suspend" optimization for the device in the given system
suspend-resume cycle than to enable it and get confused going
forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/13718674.uLZWGnKmhe@rjwysocki.net
|
|
The comment in pm_runtime_blocked() is acutally wrong: power.last_status
is not a bit field. Its data type is an enum and so one can reasonably
assume that partial updates of it will not be observed.
Accordingly, pm_runtime_blocked() can be converted to a static inline
function and the related locking overhead can be eliminated, so long
as it is only used in system suspend/resume code paths because
power.last_status is not expected to be updated concurrently while
that code is running.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1923449.tdWV9SEqCh@rjwysocki.net
|
|
Put the update of the power.smart_suspend device flag under the PM
spinlock of the device in case multiple bit fields in struct dev_pm_info
occupy one memory location which needs to be updated via RMW every time
any of these bit fields is updated.
The lock in question is already held around the power.direct_complete
flag update in device_prepare() for the same reason, so this change does
not add locking-related overhead to the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2368159.ElGaqSPkdT@rjwysocki.net
|
|
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b95e ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
|
|
Since pm_runtime_force_resume() requires pm_runtime_force_suspend() to
be called before it on the same device, the runtime PM status of the
device is RPM_SUSPENDED when it is called unless the device's runtime
PM status is changed somewhere else in the meantime.
However, even if that happens, the power.needs_force_resume
check is still required to pass and that flag is only set by
pm_runtime_force_suspend() once and it is cleared at the end of
pm_runtime_force_resume(), so it cannot be taken into account
twice in a row.
According to the above, the pm_runtime_status_suspended(dev) check in
pm_runtime_force_resume() is redundant, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2309120.iZASKD2KPV@rjwysocki.net
|
|
The module parameter defines number of iso packets per one URB. User is
allowed to set any value to the parameter of type int, which can lead to
various kinds of weird and incorrect behavior like integer overflows,
truncations, etc. Number of packets should be a small non-negative number.
Since this parameter is read-only, its value can be validated on driver
probe.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250303100413.835-1-m.masimov@mt-integration.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add PCI ID for the Diamond Rapids Platforms
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250226214728.1256747-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Based on the dmesg messages from the original reporter:
[ 4.964073] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
[ 4.964083] thinkpad_acpi: Error probing battery 2
Lenovo ThinkPad X131e also needs this battery quirk.
Reported-by: Fan Yang <804284660@qq.com>
Tested-by: Fan Yang <804284660@qq.com>
Co-developed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250221164825.77315-1-jeffbai@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Volume buttons on Microsoft Surface Go 4 tablet didn't send any events.
Add Surface Go 4 DMI match to button_array_table to fix this.
Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250220154016.3620917-1-dmitry@d-systems.ee
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
|
|
Remove needless 'return' in the following void APIs:
__pm_wakeup_event()
pm_wakeup_event()
pm_wakeup_hard_event()
Since both the API and callee involved are void functions.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20250221-rmv_return-v1-14-cc8dff275827@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, if power.no_callbacks is set, device_prepare() will also set
power.direct_complete for the device. If power.direct_complete is set
in device_resume(), the clearing of power.is_prepared will be skipped
and if new children appear under the device at that point, a warning
will be printed.
After commit (f76b168b6f11 PM: Rename dev_pm_info.in_suspend to
is_prepared), power.is_prepared is generally cleared in device_resume()
before invoking the resume callback for the device which allows that
callback to add new children without triggering the warning, but this
does not happen for devices with power.direct_complete set.
This problem is visible in USB where usb_set_interface() can be called
before device_complete() clears power.is_prepared for interface devices
and since ep devices are added then, the warning is printed:
usb 1-1: reset high-speed USB device number 3 using ci_hdrc
ep_81: PM: parent 1-1:1.1 should not be sleeping
PM: resume devices took 0.936 seconds
Since it is legitimate to add the ep devices at that point, the
warning above is not particularly useful, so get rid of it by
clearing power.is_prepared in device_resume() for devices with
power.direct_complete set if they have no PM callbacks, in which
case they need not actually resume for the new children to work.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20250224070049.3338646-1-xu.yang_2@nxp.com
[ rjw: New subject, changelog edits, rephrased new code comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
syzbot reported a deadlock in lock_system_sleep() (see below).
The write operation to "/sys/module/hibernate/parameters/compressor"
conflicts with the registration of ieee80211 device, resulting in a deadlock
when attempting to acquire system_transition_mutex under param_lock.
To avoid this deadlock, change hibernate_compressor_param_set() to use
mutex_trylock() for attempting to acquire system_transition_mutex and
return -EBUSY when it fails.
Task flags need not be saved or adjusted before calling
mutex_trylock(&system_transition_mutex) because the caller is not going
to end up waiting for this mutex and if it runs concurrently with system
suspend in progress, it will be frozen properly when it returns to user
space.
syzbot report:
syz-executor895/5833 is trying to acquire lock:
ffffffff8e0828c8 (system_transition_mutex){+.+.}-{4:4}, at: lock_system_sleep+0x87/0xa0 kernel/power/main.c:56
but task is already holding lock:
ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: kernel_param_lock kernel/params.c:607 [inline]
ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: param_attr_store+0xe6/0x300 kernel/params.c:586
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (param_lock){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730
ieee80211_rate_control_ops_get net/mac80211/rate.c:220 [inline]
rate_control_alloc net/mac80211/rate.c:266 [inline]
ieee80211_init_rate_ctrl_alg+0x18d/0x6b0 net/mac80211/rate.c:1015
ieee80211_register_hw+0x20cd/0x4060 net/mac80211/main.c:1531
mac80211_hwsim_new_radio+0x304e/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5558
init_mac80211_hwsim+0x432/0x8c0 drivers/net/wireless/virtual/mac80211_hwsim.c:6910
do_one_initcall+0x128/0x700 init/main.c:1257
do_initcall_level init/main.c:1319 [inline]
do_initcalls init/main.c:1335 [inline]
do_basic_setup init/main.c:1354 [inline]
kernel_init_freeable+0x5c7/0x900 init/main.c:1568
kernel_init+0x1c/0x2b0 init/main.c:1457
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
-> #2 (rtnl_mutex){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730
wg_pm_notification drivers/net/wireguard/device.c:80 [inline]
wg_pm_notification+0x49/0x180 drivers/net/wireguard/device.c:64
notifier_call_chain+0xb7/0x410 kernel/notifier.c:85
notifier_call_chain_robust kernel/notifier.c:120 [inline]
blocking_notifier_call_chain_robust kernel/notifier.c:345 [inline]
blocking_notifier_call_chain_robust+0xc9/0x170 kernel/notifier.c:333
pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102
snapshot_open+0x189/0x2b0 kernel/power/user.c:77
misc_open+0x35a/0x420 drivers/char/misc.c:179
chrdev_open+0x237/0x6a0 fs/char_dev.c:414
do_dentry_open+0x735/0x1c40 fs/open.c:956
vfs_open+0x82/0x3f0 fs/open.c:1086
do_open fs/namei.c:3830 [inline]
path_openat+0x1e88/0x2d80 fs/namei.c:3989
do_filp_open+0x20c/0x470 fs/namei.c:4016
do_sys_openat2+0x17a/0x1e0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x175/0x210 fs/open.c:1454
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #1 ((pm_chain_head).rwsem){++++}-{4:4}:
down_read+0x9a/0x330 kernel/locking/rwsem.c:1524
blocking_notifier_call_chain_robust kernel/notifier.c:344 [inline]
blocking_notifier_call_chain_robust+0xa9/0x170 kernel/notifier.c:333
pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102
snapshot_open+0x189/0x2b0 kernel/power/user.c:77
misc_open+0x35a/0x420 drivers/char/misc.c:179
chrdev_open+0x237/0x6a0 fs/char_dev.c:414
do_dentry_open+0x735/0x1c40 fs/open.c:956
vfs_open+0x82/0x3f0 fs/open.c:1086
do_open fs/namei.c:3830 [inline]
path_openat+0x1e88/0x2d80 fs/namei.c:3989
do_filp_open+0x20c/0x470 fs/namei.c:4016
do_sys_openat2+0x17a/0x1e0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x175/0x210 fs/open.c:1454
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (system_transition_mutex){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3163 [inline]
check_prevs_add kernel/locking/lockdep.c:3282 [inline]
validate_chain kernel/locking/lockdep.c:3906 [inline]
__lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730
lock_system_sleep+0x87/0xa0 kernel/power/main.c:56
hibernate_compressor_param_set+0x1c/0x210 kernel/power/hibernate.c:1452
param_attr_store+0x18f/0x300 kernel/params.c:588
module_attr_store+0x55/0x80 kernel/params.c:924
sysfs_kf_write+0x117/0x170 fs/sysfs/file.c:139
kernfs_fop_write_iter+0x33d/0x500 fs/kernfs/file.c:334
new_sync_write fs/read_write.c:586 [inline]
vfs_write+0x5ae/0x1150 fs/read_write.c:679
ksys_write+0x12b/0x250 fs/read_write.c:731
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Chain exists of:
system_transition_mutex --> rtnl_mutex --> param_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(param_lock);
lock(rtnl_mutex);
lock(param_lock);
lock(system_transition_mutex);
*** DEADLOCK ***
Reported-by: syzbot+ace60642828c074eb913@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ace60642828c074eb913
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://patch.msgid.link/20250224013139.3994500-1-lizhi.xu@windriver.com
[ rjw: New subject matching the code changes, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add an optimization (on top of previous changes) to avoid calling
pm_runtime_blocked(), which involves acquiring the device's PM spinlock,
for devices with no PM callbacks and runtime PM "blocked".
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2978873.e9J7NaK4W3@rjwysocki.net
|
|
When firmware traces are enabled, the firmware dumps 48-bit timestamps
for each trace as two 32-bit values, highest 32 bits (of which only 16
useful) first.
The driver was reassembling them the other way round i.e. interpreting
the first value in memory as the lowest 32 bits, and the second value
as the highest 32 bits (then truncated to 16 bits).
Due to this, firmware trace dumps showed very large timestamps even for
traces recorded shortly after GPU boot. The timestamps in these dumps
would also sometimes jump backwards because of the truncation.
Example trace dumped after loading the powervr module and enabling
firmware traces, where each line is commented with the timestamp value
in hexadecimal to better show both issues:
[93540092739584] : Host Sync Partition marker: 1 // 0x551300000000
[28419798597632] : GPU units deinit // 0x19d900000000
[28548647616512] : GPU deinit // 0x19f700000000
Update logic to reassemble the timestamps halves in the correct order.
Fixes: cb56cd610866 ("drm/imagination: Add firmware trace to debugfs")
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221-fix-fw-trace-timestamps-v1-1-dba4aeb030ca@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Ensure job done fences are only initialised once.
This fixes a memory manager not clean warning from drm_mm_takedown
on module unload.
Cc: stable@vger.kernel.org
Fixes: eaf01ee5ba28 ("drm/imagination: Implement job submission and scheduling")
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226-init-done-fences-once-v2-1-c1b2f556b329@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Avoid a warning from drm_gem_gpuva_assert_lock_held in drm_gpuva_unlink.
The Imagination driver uses the GEM object reservation lock to protect
the gpuva list, but the GEM object was not always known in the code
paths that ended up calling drm_gpuva_unlink. When the GEM object isn't
known, it is found by calling drm_gpuva_find to lookup the object
associated with a given virtual address range, or by calling
drm_gpuva_find_first when removing all mappings.
Cc: stable@vger.kernel.org
Fixes: 4bc736f890ce ("drm/imagination: vm: make use of GPUVM's drm_exec helper")
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226-hold-drm_gem_gpuva-lock-for-unmap-v2-1-3fdacded227f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Do scheduler queue fence release processing on a workqueue, rather
than in the release function itself.
Fixes deadlock issues such as the following:
[ 607.400437] ============================================
[ 607.405755] WARNING: possible recursive locking detected
[ 607.415500] --------------------------------------------
[ 607.420817] weston:zfq0/24149 is trying to acquire lock:
[ 607.426131] ffff000017d041a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: pvr_gem_object_vunmap+0x40/0xc0 [powervr]
[ 607.436728]
but task is already holding lock:
[ 607.442554] ffff000017d105a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_ioctl+0x250/0x554
[ 607.451727]
other info that might help us debug this:
[ 607.458245] Possible unsafe locking scenario:
[ 607.464155] CPU0
[ 607.466601] ----
[ 607.469044] lock(reservation_ww_class_mutex);
[ 607.473584] lock(reservation_ww_class_mutex);
[ 607.478114]
*** DEADLOCK ***
Cc: stable@vger.kernel.org
Fixes: eaf01ee5ba28 ("drm/imagination: Implement job submission and scheduling")
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226-fence-release-deadlock-v2-1-6fed2fc1fe88@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Retpoline mitigation for spectre-v2 uses thunks for indirect branches. To
support this mitigation compilers add a CS prefix with
-mindirect-branch-cs-prefix. For an indirect branch in asm, this needs to
be added manually.
CS prefix is already being added to indirect branches in asm files, but not
in inline asm. Add CS prefix to CALL_NOSPEC for inline asm as well. There
is no JMP_NOSPEC for inline asm.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-2-96599fed0f33@linux.intel.com
|
|
CALL_NOSPEC macro is used to generate Spectre-v2 mitigation friendly
indirect branches. At compile time the macro defaults to indirect branch,
and at runtime those can be patched to thunk based mitigations.
This approach is opposite of what is done for the rest of the kernel, where
the compile time default is to replace indirect calls with retpoline thunk
calls.
Make CALL_NOSPEC consistent with the rest of the kernel, default to
retpoline thunk at compile time when CONFIG_MITIGATION_RETPOLINE is
enabled.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-1-96599fed0f33@linux.intel.com
|
|
`cb_mutex` was introduced in commit 9e0894d07072e ("platform/x86/amd/pmf:
Enable Custom BIOS Inputs for PMF-TA") to prevent conccurrent access for
BIOS inputs. It however isn't initialized and so on use it may lead to
a NULL pointer dereference.
Add code to initialize on probe and clean up on destroy.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Cc: Richard Gong <richgong@amd.com>
Fixes: 9e0894d07072e ("platform/x86/amd/pmf: Enable Custom BIOS Inputs for PMF-TA")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-By: Yijun Shen <Yijun_Shen@Dell.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250227170308.435862-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The xHC resources allocated for USB devices are not released in correct
order after resuming in case when while suspend device was reconnected.
This issue has been detected during the fallowing scenario:
- connect hub HS to root port
- connect LS/FS device to hub port
- wait for enumeration to finish
- force host to suspend
- reconnect hub attached to root port
- wake host
For this scenario during enumeration of USB LS/FS device the Cadence xHC
reports completion error code for xHC commands because the xHC resources
used for devices has not been properly released.
XHCI specification doesn't mention that device can be reset in any order
so, we should not treat this issue as Cadence xHC controller bug.
Similar as during disconnecting in this case the device resources should
be cleared starting form the last usb device in tree toward the root hub.
To fix this issue usbcore driver should call hcd->driver->reset_device
for all USB devices connected to hub which was reconnected while
suspending.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/PH7PR07MB953841E38C088678ACDCF6EEDDCC2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When performing continuous unbind/bind operations on the USB drivers
available on the Renesas RZ/G2L SoC, a kernel crash with the message
"Unable to handle kernel NULL pointer dereference at virtual address"
may occur. This issue points to the usbhsc_notify_hotplug() function.
Flush the delayed work to avoid its execution when driver resources are
unavailable.
Fixes: bc57381e6347 ("usb: renesas_usbhs: use delayed_work instead of work_struct")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The gpriv->transceiver is retrieved in probe() through usb_get_phy() but
never released. Use devm_usb_get_phy() to handle this scenario.
This issue was identified through code investigation. No issue was found
without this change.
Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clocks acquired with of_clk_get() need to be freed with clk_put(). Call
clk_put() on priv->clks[0] on error path.
Fixes: 3df0e240caba ("usb: renesas_usbhs: Add multiple clocks management")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While commit d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in
event cache") makes sure that top half(TH) does not end up overwriting the
cached events before processing them when the TH gets invoked more than one
time, returning IRQ_HANDLED results in occasional irq storm where the TH
hogs the CPU. The irq storm can be prevented by the flag before event
handler busy is cleared. Default enable interrupt moderation in all
versions which support them.
ftrace event stub during dwc3 irq storm:
irq/504_dwc3-1111 ( 1111) [000] .... 70.000866: irq_handler_exit: irq=14 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000872: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000874: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000881: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000883: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000889: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000892: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000898: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000901: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000907: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000909: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000915: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000918: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000924: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000927: irq_handler_exit: irq=504 ret=handled
irq/504_dwc3-1111 ( 1111) [000] .... 70.000933: irq_handler_entry: irq=504 name=dwc3
irq/504_dwc3-1111 ( 1111) [000] .... 70.000935: irq_handler_exit: irq=504 ret=handled
....
Cc: stable <stable@kernel.org>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250216223003.3568039-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the USB configuration is not valid, then avoid checking for
bmAttributes to prevent null pointer deference.
Cc: stable <stable@kernel.org>
Fixes: 40e89ff5750f ("usb: gadget: Set self-powered based on MaxPower and bmAttributes")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250224085604.417327-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When adding support for USB3-over-USB4 tunnelling detection, a check
for an Intel-specific capability was added. This capability, which
goes by ID 206, is used without any check that we are actually
dealing with an Intel host.
As it turns out, the Cadence XHCI controller *also* exposes an
extended capability numbered 206 (for unknown purposes), but of
course doesn't have the Intel-specific registers that the tunnelling
code is trying to access. Fun follows.
The core of the problems is that the tunnelling code blindly uses
vendor-specific capabilities without any check (the Intel-provided
documentation I have at hand indicates that 192-255 are indeed
vendor-specific).
Restrict the detection code to Intel HW for real, preventing any
further explosion on my (non-Intel) HW.
Cc: stable <stable@kernel.org>
Fixes: 948ce83fbb7df ("xhci: Add USB4 tunnel detection for USB3 devices on Intel hosts")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250227194529.2288718-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Syzbot keeps reporting an issue [1] that occurs when erroneous symbols
sent from userspace get through into user_alpha2[] via
regulatory_hint_user() call. Such invalid regulatory hints should be
rejected.
While a sanity check from commit 47caf685a685 ("cfg80211: regulatory:
reject invalid hints") looks to be enough to deter these very cases,
there is a way to get around it due to 2 reasons.
1) The way isalpha() works, symbols other than latin lower and
upper letters may be used to determine a country/domain.
For instance, greek letters will also be considered upper/lower
letters and for such characters isalpha() will return true as well.
However, ISO-3166-1 alpha2 codes should only hold latin
characters.
2) While processing a user regulatory request, between
reg_process_hint_user() and regulatory_hint_user() there happens to
be a call to queue_regulatory_request() which modifies letters in
request->alpha2[] with toupper(). This works fine for latin symbols,
less so for weird letter characters from the second part of _ctype[].
Syzbot triggers a warning in is_user_regdom_saved() by first sending
over an unexpected non-latin letter that gets malformed by toupper()
into a character that ends up failing isalpha() check.
Prevent this by enhancing is_an_alpha2() to ensure that incoming
symbols are latin letters and nothing else.
[1] Syzbot report:
------------[ cut here ]------------
Unexpected user alpha2: A�
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
Modules linked in:
CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_power_efficient crda_timeout_work
RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline]
RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline]
RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
...
Call Trace:
<TASK>
crda_timeout_work+0x27/0x50 net/wireless/reg.c:542
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: syzbot+e10709ac3c44f3d4e800@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e10709ac3c44f3d4e800
Fixes: 09d989d179d0 ("cfg80211: add regulatory hint disconnect support")
Cc: stable@kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250228134659.1577656-1-n.zhandarovich@fintech.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Support Mic Mute LED for ThinkCentre M series.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/c211a2702f1f411e86bd7420d7eebc03@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
parse_dcal() validate num_aces to allocate ace array.
f (num_aces > ULONG_MAX / sizeof(struct smb_ace *))
It is an incorrect validation that we can create an array of size ULONG_MAX.
smb_acl has ->size field to calculate actual number of aces in response buffer
size. Use this to check invalid num_aces.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
parse_dcal() validate num_aces to allocate posix_ace_state_array.
if (num_aces > ULONG_MAX / sizeof(struct smb_ace *))
It is an incorrect validation that we can create an array of size ULONG_MAX.
smb_acl has ->size field to calculate actual number of aces in request buffer
size. Use this to check invalid num_aces.
Reported-by: Igor Leite Ladessa <igor-ladessa@hotmail.com>
Tested-by: Igor Leite Ladessa <igor-ladessa@hotmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
2.4.5 in [MS-DTYP].pdf describe the data type of num_aces as le16.
AceCount (2 bytes): An unsigned 16-bit integer that specifies the count
of the number of ACE records in the ACL.
Change it to le16 and add reserved field to smb_acl struct.
Reported-by: Igor Leite Ladessa <igor-ladessa@hotmail.com>
Tested-by: Igor Leite Ladessa <igor-ladessa@hotmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If lock count is greater than 1, flags could be old value.
It should be checked with flags of smb_lock, not flags.
It will cause bug-on trap from locks_free_lock in error handling
routine.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If smb_lock->zero_len has value, ->llist of smb_lock is not delete and
flock is old one. It will cause use-after-free on error handling
routine.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
req->handle is allocated using ksmbd_acquire_id(&ipc_ida), based on
ida_alloc. req->handle from ksmbd_ipc_login_request and
FSCTL_PIPE_TRANSCEIVE ioctl can be same and it could lead to type confusion
between messages, resulting in access to unexpected parts of memory after
an incorrect delivery. ksmbd check type of ipc response but missing add
continue to check next ipc reponse.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If osidoffset, gsidoffset and dacloffset could be greater than smb_ntsd
struct size. If it is smaller, It could cause slab-out-of-bounds.
And when validating sid, It need to check it included subauth array size.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Steve mainly checks his email through his gmail address.
I also check issues through another email address.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Commit 18b1e870a496 ("tracing/probes: Add $arg* meta argument for all
function args") introduced MAX_ARG_BUF_LEN but it is not used.
Remove it.
Link: https://lore.kernel.org/all/174055075876.4079315.8805416872155957588.stgit@mhiramat.tok.corp.google.com/
Fixes: 18b1e870a496 ("tracing/probes: Add $arg* meta argument for all function args")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- tegra210 div_u64 divison and max page fixes
- revert Qualcomm unavailable register workaround which is causing
regression, fixes have been proposed but still gaps are present so
revert this for now
* tag 'dmaengine-fix-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: Revert "dmaengine: qcom: bam_dma: Avoid writing unavailable register"
dmaengine: tegra210-adma: check for adma max page
dmaengine: tegra210-adma: Use div_u64 for 64 bit division
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- rockchip phy kconfig dependency fix with USB_COMMON and regression
fix for old DT
- stm32 phy overflow assertion fix
- exonysfs phy refclk masks fix and power gate on exit fix
- freescale fix for clock dividor valid range
- TI regmap syscon register fix
- tegra reset registers on init fix
* tag 'phy-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: tegra: xusb: reset VBUS & ID OVERRIDE
phy: ti: gmii-sel: Do not use syscon helper to build regmap
phy: exynos5-usbdrd: gs101: ensure power is gated to SS phy in phy_exit()
phy: freescale: fsl-samsung-hdmi: Limit PLL lock detection clock divider to valid range
phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclk
phy: stm32: Fix constant-value overflow assertion
phy: rockchip: naneng-combphy: compatible reset with old DT
phy: rockchip: fix Kconfig dependency more
|
|
Leading zero bits are sent on the bus before the temperature value is
transmitted. If any of these bits are high, the connection might be
unstable or there could be no AD7314 / ADT730x (or compatible) at all.
Return -EIO in that case.
Signed-off-by: Erik Schumacher <erik.schumacher@iris-sensing.com>
Fixes: 4f3a659581cab ("hwmon: AD7314 driver (ported from IIO)")
Link: https://lore.kernel.org/r/24a50c2981a318580aca8f50d23be7987b69ea00.camel@iris-sensing.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
I could not find a single table that has the values currently present in
the table, change it to the actual values that can be found in [1]/[2]
and [3] (page 15 column 2)
[1]: https://www.murata.com/products/productdetail?partno=NCP15XH103F03RC
[2]: https://www.murata.com/products/productdata/8796836626462/NTHCG83.txt?1437969843000
[3]: https://nl.mouser.com/datasheet/2/281/r44e-522712.pdf
Fixes: 54ce3a0d8011 ("hwmon: (ntc_thermistor) Add support for ncpXXxh103")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://lore.kernel.org/r/20250227-ntc_thermistor_fixes-v1-3-70fa73200b52@gocontroll.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The `pmbus_identify()` function fails to correctly determine the number
of supported pages on PMBus devices. This occurs because `info->pages`
is implicitly zero-initialised, and `pmbus_set_page()` does not perform
writes to the page register if `info->pages` is not yet initialised.
Without this patch, `info->pages` is always set to the maximum after
scanning.
This patch initialises `info->pages` to `PMBUS_PAGES` before the probing
loop, enabling `pmbus_set_page()` writes to make it out onto the bus
correctly identifying the number of pages. `PMBUS_PAGES` seemed like a
reasonable non-zero number because that's the current result of the
identification process.
Testing was done with a PMBus device in QEMU.
Signed-off-by: Titus Rwantare <titusr@google.com>
Fixes: 442aba78728e7 ("hwmon: PMBus device driver")
Link: https://lore.kernel.org/r/20250227222455.2583468-1-titusr@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix a buggy get_direction() retval check
* tag 'gpio-fixes-for-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix Oops in gpiod_direction_input_nonotify()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Fix fallout of /scripts/sorttable cleanup"
* tag 'mips-fixes_6.14_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Ignore relocs against __ex_table for relocatable kernel
|
|
Fix RCU warnings in override_creds and revert_creds by turning
the RCU pointer into a normal pointer using rcu_replace_pointer.
These warnings were previously private to the cred code, but due
to the move into the header file they are now polluting unrelated
subsystems.
Fixes: 49dffdfde462 ("cred: Add a light version of override/revert_creds()")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/Z8QGQGW0IaSklKG7@gondor.apana.org.au
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
