summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-04afs: Fix directory entry size calculationDavid Howells
The number of dirent records used by an AFS directory entry should be calculated using the assumption that there is a 16-byte name field in the first block, rather than a 20-byte name field (which is actually the case). This miscalculation is historic and effectively standard, so we have to use it. The calculation we need to use is: 1 + (((strlen(name) + 1) + 15) >> 5) where we are adding one to the strlen() result to account for the NUL termination. Fix this by the following means: (1) Create an inline function to do the calculation for a given name length. (2) Use the function to calculate the number of records used for a dirent in afs_dir_iterate_block(). Use this to move the over-end check out of the loop since it only needs to be done once. Further use this to only go through the loop for the 2nd+ records composing an entry. The only test there now is for if the record is allocated - and we already checked the first block at the top of the outer loop. (3) Add a max name length check in afs_dir_iterate_block(). (4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function from (1) to calculate the number of blocks rather than doing it incorrectly themselves. Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...") Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.dionne@auristor.com>
2021-01-04afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=yDavid Howells
AFS has a structured layout in its directory contents (AFS dirs are downloaded as files and parsed locally by the client for lookup/readdir). The slots in the directory are defined by union afs_xdr_dirent. This, however, only directly allows a name of a length that will fit into that union. To support a longer name, the next 1-8 contiguous entries are annexed to the first one and the name flows across these. afs_dir_iterate_block() uses strnlen(), limited to the space to the end of the page, to find out how long the name is. This worked fine until 6a39e62abbaf. With that commit, the compiler determines the size of the array and asserts that the string fits inside that array. This is a problem for AFS because we *expect* it to overflow one or more arrays. A similar problem also occurs in afs_dir_scan_block() when a directory file is being locally edited to avoid the need to redownload it. There strlen() was being used safely because each page has the last byte set to 0 when the file is downloaded and validated (in afs_dir_check_page()). Fix this by changing the afs_xdr_dirent union name field to an indeterminate-length array and dropping the overflow field. (Note that whilst looking at this, I realised that the calculation of the number of slots a dirent used is non-standard and not quite right, but I'll address that in a separate patch.) The issue can be triggered by something like: touch /afs/example.com/thisisaveryveryverylongname and it generates a report that looks like: detected buffer overflow in strnlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! ... RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: afs_dir_iterate_block+0x12b/0x35b afs_dir_iterate+0x14e/0x1ce afs_do_lookup+0x131/0x417 afs_lookup+0x24f/0x344 lookup_open.isra.0+0x1bb/0x27d open_last_lookups+0x166/0x237 path_openat+0xe0/0x159 do_filp_open+0x48/0xa4 ? kmem_cache_alloc+0xf5/0x16e ? __clear_close_on_exec+0x13/0x22 ? _raw_spin_unlock+0xa/0xb do_sys_openat2+0x72/0xde do_sys_open+0x3b/0x58 do_syscall_64+0x2d/0x3a entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 6a39e62abbaf ("lib: string.h: detect intra-object overflow in fortified string functions") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.dionne@auristor.com> cc: Daniel Axtens <dja@axtens.net>
2021-01-04arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMANicolas Saenz Julienne
Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and !CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The limit will default to ~0ULL, effectively spanning the whole memory, which is too high for a configuration that expects low memory to be capped at 4GB. Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour CONFIG_ZONE_DMA32, or span the entire memory when not enabled. Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20201218163307.10150-1-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-04arm64: mte: remove an ISB on kernel exitPeter Collingbourne
This ISB is unnecessary because we will soon do an ERET. Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I69f1ee6bb09b1372dd744a0e01cedaf090c8d448 Link: https://lore.kernel.org/r/20201203073458.2675400-1-pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-04arm64/smp: Remove unused irq variable in arch_show_interrupts()Geert Uytterhoeven
arch/arm64/kernel/smp.c: In function ‘arch_show_interrupts’: arch/arm64/kernel/smp.c:808:16: warning: unused variable ‘irq’ [-Wunused-variable] 808 | unsigned int irq = irq_desc_get_irq(ipi_desc[i]); | ^~~ The removal of the last user forgot to remove the variable. Fixes: 5089bc51f81f ("arm64/smp: Use irq_desc_kstat_cpu() in arch_show_interrupts()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201215103026.2872532-1-geert+renesas@glider.be Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-04USB: serial: option: add Quectel EM160R-GLBjørn Mork
New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA, and ff/ff/ff for RMNET/QMI. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0620 Rev= 4.09 S: Manufacturer=Quectel S: Product=EM160R-GL S: SerialNumber=e31cedc1 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> [ johan: add model comment ] Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-04kconfig: remove 'kvmconfig' and 'xenconfig' shorthandsMasahiro Yamada
Linux 5.10 is out. Remove the 'kvmconfig' and 'xenconfig' shorthands as previously announced. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-01-04lib/raid6: Let $(UNROLL) rules work with macOS userlandJohn Millikin
Older versions of BSD awk are fussy about the order of '-v' and '-f' flags, and require a space after the flag name. This causes build failures on platforms with an old awk, such as macOS and NetBSD. Since GNU awk and modern versions of BSD awk (distributed with FreeBSD/OpenBSD) are fine with either form, the definition of 'cmd_unroll' can be trivially tweaked to let the lib/raid6 Makefile work with both old and new awk flag dialects. Signed-off-by: John Millikin <john@john-millikin.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-01-04kconfig: Support building mconf with vendor sysroot ncursesJohn Millikin
Changes the final fallback path in the ncurses locator for mconf to support host compilers with a non-default sysroot. This is similar to the hardcoded search for ncurses under '/usr/include', but can support compilers that keep their default header and library directories elsewhere. For nconfig, do nothing because the only vendor compiler I'm aware of with this layout (Apple Clang) ships an ncurses version that's too old for nconfig anyway. Signed-off-by: John Millikin <john@john-millikin.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-01-04kconfig: config script: add a little user helpRandy Dunlap
Give the user a clue about the problem along with the 35 lines of usage/help text. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: linux-kbuild@vger.kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-01-04MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removalLukas Bulwahn
Commit 1e860048c53e ("gcc-plugins: simplify GCC plugin-dev capability test") removed ./scripts/gcc-plugin.sh, but missed to adjust MAINTAINERS. Hence, ./scripts/get_maintainers.pl --self-test=patterns warns: warning: no file matches F: scripts/gcc-plugin.sh Adjust entries in GGC PLUGINS section after this file removal. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-01-04zonefs: select CONFIG_CRC32Arnd Bergmann
When CRC32 is disabled, zonefs cannot be linked: ld: fs/zonefs/super.o: in function `zonefs_fill_super': Add a Kconfig 'select' statement for it. Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2021-01-03Linux 5.11-rc2v5.11-rc2Linus Torvalds
2021-01-03lightnvm: select CONFIG_CRC32Arnd Bergmann
Without CRC32 support, this fails to link: arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_init': pblk-init.c:(.text+0x2654): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_exit': pblk-init.c:(.text+0x2a7c): undefined reference to `crc32_le' Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-03block: rsxx: select CONFIG_CRC32Arnd Bergmann
Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config': config.c:(.text+0x124): undefined reference to `crc32_le' Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-03ALSA: usb-audio: Add quirk for RC-505Timon Reinold
BOSS RC-505 (shown by lsusb as "Roland Corp. RC-505") does require the same quirk as these other BOSS devices. Without this quirk it is neither possible to capture audio from nor to write audio to the RC-505. Both just result in an empty audio stream. With these changes both capture and playback seem to work quite fine. MIDI funtionality was not tested. Tested-by: Harry Reinold <harry.reinold@posteo.de> Signed-off-by: Timon Reinold <tirei@agon.one> Link: https://lore.kernel.org/r/20210102210835.21268-1-tirei@agon.one Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-03bpf: Fix a task_iter bug caused by a merge conflict resolutionYonghong Song
Latest bpf tree has a bug for bpf_iter selftest: $ ./test_progs -n 4/25 test_bpf_sk_storage_get:PASS:bpf_iter_bpf_sk_storage_helpers__open_and_load 0 nsec test_bpf_sk_storage_get:PASS:socket 0 nsec ... do_dummy_read:PASS:read 0 nsec test_bpf_sk_storage_get:FAIL:bpf_map_lookup_elem map value wasn't set correctly (expected 1792, got -1, err=0) #4/25 bpf_sk_storage_get:FAIL #4 bpf_iter:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 2 FAILED When doing merge conflict resolution, Commit 4bfc4714849d missed to save curr_task to seq_file private data. The task pointer in seq_file private data is passed to bpf program. This caused NULL-pointer task passed to bpf program which will immediately return upon checking whether task pointer is NULL. This patch added back the assignment of curr_task to seq_file private data and fixed the issue. Fixes: 4bfc4714849d ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201231052418.577024-1-yhs@fb.com
2021-01-03crypto: ecdh - avoid buffer overflow in ecdh_set_secret()Ard Biesheuvel
Pavel reports that commit 17858b140bf4 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()") fixes one problem but introduces another: the unconditional memcpy() introduced by that commit may overflow the target buffer if the source data is invalid, which could be the result of intentional tampering. So check params.key_size explicitly against the size of the target buffer before validating the key further. Fixes: 17858b140bf4 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()") Reported-by: Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03crypto: arm/chacha-neon - add missing counter incrementArd Biesheuvel
Commit 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples") refactored the chacha block handling in the glue code in a way that may result in the counter increment to be omitted when calling chacha_block_xor_neon() to process a full block. This violates the skcipher API, which requires that the output IV is suitable for handling more input as long as the preceding input has been presented in round multiples of the block size. Also, the same code is exposed via the chacha library interface whose callers may actually rely on this increment to occur even for final blocks that are smaller than the chacha block size. So increment the counter after calling chacha_block_xor_neon(). Fixes: 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples") Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-02Merge tag 's390-5.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 cleanups from Vasily Gorbik: "Update defconfigs and sort config select list" * tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/Kconfig: sort config S390 select list once again s390: update defconfigs
2021-01-02Merge tag 'pm-5.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a crash in intel_pstate during resume from suspend-to-RAM that may occur after recent changes and two resource leaks in error paths in the operating performance points (OPP) framework, add a new C-states table to intel_idle and update the cpuidle MAINTAINERS entry to cover the governors too. Specifics: - Fix recently introduced crash in the intel_pstate driver that occurs if scale-invariance is disabled during resume from suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR values made by the platform firmware (Rafael Wysocki). - Fix a memory leak and add a missing clk_put() in error paths in the OPP framework (Quanyang Wang, Viresh Kumar). - Add new C-states table for SnowRidge processors to the intel_idle driver (Artem Bityutskiy). - Update the MAINTAINERS entry for cpuidle to make it clear that the governors are covered by it too (Lukas Bulwahn)" * tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: add SnowRidge C-state table cpufreq: intel_pstate: Fix fast-switch fallback path opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
2021-01-02Merge branches 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki
* pm-cpufreq: cpufreq: intel_pstate: Fix fast-switch fallback path * pm-cpuidle: intel_idle: add SnowRidge C-state table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
2021-01-01Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big core two fixes are for power management ("block: Do not accept any requests while suspended" and "block: Fix a race in the runtime power management code") which finally sorts out the resume problems we've occasionally been having. To make the resume fix, there are seven necessary precursors which effectively renames REQ_PREEMPT to REQ_PM, so every "special" request in block is automatically a power management exempt one. All of the non-PM preempt cases are removed except for the one in the SCSI Parallel Interface (spi) domain validation which is a genuine case where we have to run requests at high priority to validate the bus so this becomes an autopm get/put protected request" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits) scsi: cxgb4i: Fix TLS dependency scsi: ufs: Un-inline ufshcd_vops_device_reset function scsi: ufs: Re-enable WriteBooster after device reset scsi: ufs-mediatek: Use correct path to fix compile error scsi: mpt3sas: Signedness bug in _base_get_diag_triggers() scsi: block: Do not accept any requests while suspended scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE scsi: scsi_transport_spi: Set RQF_PM for domain validation commands scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT scsi: ide: Do not set the RQF_PREEMPT flag for sense requests scsi: block: Introduce BLK_MQ_REQ_PM scsi: block: Fix a race in the runtime power management code scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff() scsi: ufs-pci: Fix restore from S4 for Intel controllers scsi: ufs-mediatek: Keep VCC always-on for specific devices scsi: ufs: Allow regulators being always-on scsi: ufs: Clear UAC for RPMB after ufshcd resets ...
2021-01-01Merge tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Two minor block fixes from this last week that should go into 5.11: - Add missing NOWAIT debugfs definition (Andres) - Fix kerneldoc warning introduced this merge window (Randy)" * tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block: block: add debugfs stanza for QUEUE_FLAG_NOWAIT fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
2021-01-01Merge tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "A few fixes that should go into 5.11, all marked for stable as well: - Fix issue around identity COW'ing and users that share a ring across processes - Fix a hang associated with unregistering fixed files (Pavel) - Move the 'process is exiting' cancelation a bit earlier, so task_works aren't affected by it (Pavel)" * tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block: kernel/io_uring: cancel io_uring before task works io_uring: fix io_sqe_files_unregister() hangs io_uring: add a helper for setting a ref node io_uring: don't assume mm is constant across submits
2021-01-01depmod: handle the case of /sbin/depmod without /sbin in PATHLinus Torvalds
Commit 436e980e2ed5 ("kbuild: don't hardcode depmod path") stopped hard-coding the path of depmod, but in the process caused trouble for distributions that had that /sbin location, but didn't have it in the PATH (generally because /sbin is limited to the super-user path). Work around it for now by just adding /sbin to the end of PATH in the depmod.sh script. Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-01ALSA: hda/hdmi: Fix incorrect mutex unlock in silent_stream_disable()Takashi Iwai
The silent_stream_disable() function introduced by the commit b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to DP") takes the per_pin->lock mutex, but it unlocks the wrong one, spec->pcm_lock, which causes a deadlock. This patch corrects it. Fixes: b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to DP") Reported-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: <stable@vger.kernel.org> Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210101083852.12094-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-31atomic: remove further references to atomic_opsLukas Bulwahn
Commit f0400a77ebdc ("atomic: Delete obsolete documentation") removed ./Documentation/core-api/atomic_ops.rst, but missed to remove further references to that file. Hence, make htmldocs warns: Documentation/core-api/index.rst:53: WARNING: toctree contains reference to nonexisting document 'core-api/atomic_ops' Also, ./scripts/get_maintainer.pl --self-test=patterns warns: warning: no file matches F: Documentation/core-api/atomic_ops.rst Remove further references to ./Documentation/core-api/atomic_ops.rst. Fixes: f0400a77ebdc ("atomic: Delete obsolete documentation") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20201220060927.21582-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-12-31Documentation: doc-guide: fixes to sphinx.rstRandy Dunlap
Various fixes to sphinx.rst: - eliminate a double-space between 2 words - grammar/wording - punctuation - call rows in a table 'rows' instead of 'columns' (or does Sphinx call everything a column?) - It seems that "amdfonts" should be "amsfonts". I can't find any amdfonts. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20201228231212.22448-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-12-31docs/mm: concepts.rst: Correct the threshold to low watermarkLiao Pingfang
It should be "low watermark" where we wake up kswapd daemon. Signed-off-by: Liao Pingfang <winndows@163.com> Link: https://lore.kernel.org/r/1609053319-3112-1-git-send-email-winndows@163.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-12-31Documentation: admin: early_param()s are also listed in kernel-parametersRandy Dunlap
Add info that "early_param()" kernel boot parameters are also listed in kernel-parameters.txt. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/20201226174433.7885-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-12-31docs: Fix reST markup when linking to sectionsNícolas F. R. A. Prado
During the process of converting the documentation to reST, some links were converted using the following wrong syntax (and sometimes using %20 instead of spaces): `Display text <#section-name-in-html>`__ This syntax isn't valid according to the docutils' spec [1], but more importantly, it is specific to HTML, since it uses '#' to link to an HTML anchor. The right syntax would instead use a docutils hyperlink reference as the embedded URI to point to the section [2], that is: `Display text <Section Name_>`__ This syntax works in both HTML and PDF. The LaTeX toolchain doesn't mind the HTML anchor syntax when generating the pdf documentation (make pdfdocs), that is, the build succeeds but the links don't work, but that syntax causes errors when trying to build using the not-yet-merged rst2pdf: ValueError: format not resolved, probably missing URL scheme or undefined destination target for 'Forcing%20Quiescent%20States' So, use the correct syntax in order to have it work in all different output formats. [1]: https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#reference-names [2]: https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#embedded-uris-and-aliases Fixes: ccc9971e2147 ("docs: rcu: convert some articles from html to ReST") Fixes: c8cce10a62aa ("docs: Fix the reference labels in Locking.rst") Fixes: e548cdeffcd8 ("docs-rst: convert kernel-locking to ReST") Fixes: 7ddedebb03b7 ("ALSA: doc: ReSTize writing-an-alsa-driver document") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20201228144537.135353-1-nfraprado@protonmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-12-31KVM: arm64: Remove spurious semicolon in reg_to_encoding()Marc Zyngier
Although not a problem right now, it flared up while working on some other aspects of the code-base. Remove the useless semicolon. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-12-31ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7Kai-Heng Feng
HP EliteBook 850 G7 uses the same GPIO pins as ALC285_FIXUP_HP_GPIO_LED to enable mute and micmute LED. So apply the quirk to enable the LEDs. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201230125636.45028-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-31ALSA: hda/realtek: Add two "Intel Reference board" SSID in the ALC256.PeiSen Hou
Add two "Intel Reference boad" SSID in the alc256. Enable "power saving mode" and Enable "headset jack mode". Signed-off-by: PeiSen Hou <pshou@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/5978d2267f034c28973d117925ec9c63@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-31ALSA: hda/realtek: Add mute LED quirk for more HP laptopsManuel Jiménez
HP Pavilion 13-bb0000 (SSID 103c:87c8) needs the same quirk as other models with ALC287. Signed-off-by: Manuel Jiménez <mjbfm99@me.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/X+s/gKNydVrI6nLj@HP-Pavilion-13 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-31ALSA: hda/conexant: add a new hda codec CX11970bo liu
The current kernel does not support the cx11970 codec chip. Add a codec configuration item to kernel. [ Minor coding style fix by tiwai ] Signed-off-by: bo liu <bo.liu@senarytech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-31crypto: asym_tpm: correct zero out potential secretsGreg Kroah-Hartman
The function derive_pub_key() should be calling memzero_explicit() instead of memset() in case the complier decides to optimize away the call to memset() because it "knows" no one is going to touch the memory anymore. Cc: stable <stable@vger.kernel.org> Reported-by: Ilil Blum Shem-Tov <ilil.blum.shem-tov@intel.com> Tested-by: Ilil Blum Shem-Tov <ilil.blum.shem-tov@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/X8ns4AfwjKudpyfe@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30kernel/io_uring: cancel io_uring before task worksPavel Begunkov
For cancelling io_uring requests it needs either to be able to run currently enqueued task_works or having it shut down by that moment. Otherwise io_uring_cancel_files() may be waiting for requests that won't ever complete. Go with the first way and do cancellations before setting PF_EXITING and so before putting the task_work infrastructure into a transition state where task_work_run() would better not be called. Cc: stable@vger.kernel.org # 5.5+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-30io_uring: fix io_sqe_files_unregister() hangsPavel Begunkov
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes, however requests keeping them may never complete, e.g. because of some userspace dependency. Make sure it's interruptible otherwise it would hang forever. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-30io_uring: add a helper for setting a ref nodePavel Begunkov
Setting a new reference node to a file data is not trivial, don't repeat it, add and use a helper. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-30Merge tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A fix for an edge case in MClientRequest encoding and a couple of trivial fixups for the new msgr2 support" * tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client: libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE libceph: align session_key and con_secret to 16 bytes libceph: fix auth_signature buffer allocation in secure mode ceph: reencode gid_list when reconnecting
2020-12-30Merge tag 'misc-habanalabs-fixes-2020-12-30' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-linus Oded writes: This tag contains the following fixes for 5.11-rc2: - Fixes that are needed for supporting the new F/W with security features: - Correctly fetch PLL information in GOYA when security is enabled in F/W - Fix hard-reset support when F/W is in its preboot stage - Disable clock gating when initializing the H/W - Fix hard-reset procedure - Fix PCI controller initialization - Remove setting of Engine-Barrier in collective wait operations. This barrier created a drop in performance - Retry loading the TPC firmware in case of EINTR during loading - Fix CS counters - Register to PCI shutdown callback to fix handling of VM shutdown - Fix order of status check - Fix memory leak in reset procedure - Fix and add comments and fix indentations * tag 'misc-habanalabs-fixes-2020-12-30' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: habanalabs: Fix memleak in hl_device_reset habanalabs: fix order of status check habanalabs: register to pci shutdown callback habanalabs: add validation cs counter, fix misplaced counters habanalabs/gaudi: retry loading TPC f/w on -EINTR habanalabs: adjust pci controller init to new firmware habanalabs: update comment in hl_boot_if.h habanalabs/gaudi: enhance reset message habanalabs: full FW hard reset support habanalabs/gaudi: disable CGM at HW initialization habanalabs: Revise comment to align with mirror list name habanalabs/gaudi: do not set EB in collective slave queues habanalabs: preboot hard reset support habanalabs: remove generic gaudi get_pll_freq function habanalabs: fetch PSOC PLL frequency from F/W in goya habanalabs: add comment for pll frequency ioctl opcode habanalabs: Fix a missing-braces warning
2020-12-30intel_idle: add SnowRidge C-state tableArtem Bityutskiy
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville platforms. The following has been changed. 1. C1E latency changed from 10us to 15us. It was measured using the open source "wult" tool (the "nic" method, 15us is the 99.99th percentile). 2. C1E power break even changed from 20us to 25us, which may result in less C1E residency in some workloads. 3. C6 latency changed from 50us to 130us. Measured the same way as C1E. The C6 C-state is supported only by some SnowRidge revisions, so add a C-state table commentary about this. On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even though C6 is present in the table, the driver will only use it if the CPU does support it. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-30cpufreq: intel_pstate: Fix fast-switch fallback pathRafael J. Wysocki
When sugov_update_single_perf() falls back to the "frequency" path due to the missing scale-invariance, it will call cpufreq_driver_fast_switch() via sugov_fast_switch() and the driver's ->fast_switch() callback will be invoked, so it must not be NULL. However, after commit a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to NULL when it is going to use intel_cpufreq_adjust_perf(), which is a mistake, because on x86 the scale-invariance may be turned off dynamically, so modify it to retain the original ->adjust_perf() callback pointer. Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Reported-by: Kenneth R. Crudup <kenny@panix.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-30Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework fixes for 5.11-rc2 from Viresh Kumar: "This contains two patches to fix freeing of resources in error paths." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table
2020-12-30USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bugAlan Stern
The dummy-hcd driver was written under the assumption that all the parameters in URBs sent to its root hub would be valid. With URBs sent from userspace via usbfs, that assumption can be violated. In particular, the driver doesn't fully check the port-feature values stored in the wValue entry of Clear-Port-Feature and Set-Port-Feature requests. Values that are too large can cause the driver to perform an invalid left shift of more than 32 bits. Ironically, two of those left shifts are unnecessary, because they implement Set-Port-Feature requests that hubs are not required to support, according to section 11.24.2.13 of the USB-2.0 spec. This patch adds the appropriate checks for the port feature selector values and removes the unnecessary feature settings. It also rejects requests to set the TEST feature or to set or clear the INDICATOR and C_OVERCURRENT features, as none of these are relevant to dummy-hcd's root-hub emulation. CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+5925509f78293baa7331@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20201230162044.GA727759@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30hwmon: (pwm-fan) Ensure that calculation doesn't discard big period valuesUwe Kleine-König
With MAX_PWM being defined to 255 the code unsigned long period; ... period = ctx->pwm->args.period; state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM); calculates a too small value for duty_cycle if the configured period is big (either by discarding the 64 bit value ctx->pwm->args.period or by overflowing the multiplication). As this results in a too slow fan and so maybe an overheating machine better be safe than sorry and error out in .probe. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201215092031.152243-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-30s390/Kconfig: sort config S390 select list once againHeiko Carstens
...and add comments at the top and bottom. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-30s390: update defconfigsHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-12 16:07:17 +0000