| Age | Commit message (Collapse) | Author |
|---|
|
If an error occurs in the loop that creates the device adapters, then a
reference to 'dev' still needs to be released.
Use for_each_child_of_node_scoped() to both fix the issue and save one line
of code.
Fixes: d0f8e97866bf ("i2c: muxes: add support for tsd,mule-i2c multiplexer")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
This patch fixes an issue where the touchpad cursor movement becomes
slow on the Dell Precision 5560. Force the touchpad freq to 100khz
as a workaround.
Tested on Dell Precision 5560 with 6.14 to 6.14.6. Cursor movement
is now smooth and responsive.
Signed-off-by: fangzhong.zhou <myth5@myth5.com>
[wsa: kept sorting and removed unnecessary parts from commit msg]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.17, part 2
- apple: add support for Apple A7–A11, T2 chips
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls
|
|
A security exploit was discovered in NFS over TLS in tls_alert_recv
due to its assumption that there is valid data in the msghdr's
iterator's kvec.
Instead, this patch proposes the rework how control messages are
setup and used by sock_recvmsg().
If no control message structure is setup, kTLS layer will read and
process TLS data record types. As soon as it encounters a TLS control
message, it would return an error. At that point, NFS can setup a kvec
backed control buffer and read in the control message such as a TLS
alert. Scott found that a msg iterator can advance the kvec pointer
as a part of the copy process thus we need to revert the iterator
before calling into the tls_alert_recv.
Fixes: dea034b963c8 ("SUNRPC: Capture CMSG metadata on client-side receive")
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Suggested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Link: https://lore.kernel.org/r/20250731180058.4669-3-okorniev@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The usage of read_seqbegin_or_lock() in nfs_copy_boot_verifier()
is wrong. "seq" is always even and thus "or_lock" has no effect.
nfs_copy_boot_verifier() just copies 8 bytes and is supposed to be
very rare operation, so we do not need the adaptive locking in this case.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/r/20250731081038.3478-1-lirongqing@baidu.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The gpio-mlxbf2 driver interfaces with four GPIO controllers,
device instances 0-3. There are two IRQ resources shared between
the four controllers, and they are found in the ACPI table for
instances 0 and 3. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instances 1 and 2:
mlxbf2_gpio MLNXBF22:01: error -ENXIO: IRQ index 0 not found
Fixes: 2b725265cb08 ("gpio: mlxbf2: Introduce IRQ support")
Cc: stable@vger.kernel.org
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20250728144619.29894-1-davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This reverts commit 20117cf426b6 ("gpio: pxa: Make irq_chip immutableas")
as it caused a regression on samsung coreprimevelte and we've not been
able to fix it so far.
Cc: stable@vger.kernel.org # v6.16
Fixes: 20117cf426b6 ("gpio: pxa: Make irq_chip immutableas")
Reported-by: Duje Mihanović <duje@dujemihanovic.xyz>
Closes: https://lore.kernel.org/all/3367665.aeNJFYEL58@radijator/
Tested-by: Duje Mihanović <duje@dujemihanovic.xyz>
Link: https://lore.kernel.org/r/20250801071858.7554-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add larch_insn_gen_beq() and larch_insn_gen_bne() helpers which will be
used in BPF trampoline implementation.
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Co-developed-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Co-developed-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and easier to
reason about.
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In init_cpu_fullname(), a constant pointer to "model" property is
retrieved. It's later modified by the strsep() function, which is
illegal and corrupts kernel's FDT copy. This is shown by dmesg,
OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
Create a mutable copy of the model property and do in-place operations
on the mutable copy instead. loongson_sysconf.cpuname lives across the
kernel lifetime, thus manually releasing isn't necessary.
Also move the of_node_put() call for the root node after the usage of
its property, since of_node_put() decreases the reference counter thus
usage after the call is unsafe.
Cc: stable@vger.kernel.org
Fixes: 44a01f1f726a ("LoongArch: Parsing CPU-related information from DTS")
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The LoongArch mem= parameter parser was previously limited to the
mem=<size>@<start> format. This was inconvenient for the common use
case of simply capping the total system memory, as it forced users to
manually specify a start address. It was also inconsistent with the
behavior on other architectures.
This patch enhances the parser in early_parse_mem() to also support the
more user-friendly mem=<size> format. The implementation now checks for
the presence of the '@' symbol to determine the user's intent:
- If mem=<size> is provided (no '@'), the kernel now calls
memblock_enforce_memory_limit(). This trims memory from the top down
to the specified size.
- If mem=<size>@<start> is provided, the original behavior is retained
for backward compatibility. This allows for defining specific memory
banks.
This change introduces an important usage rule reflected in the code's
comments: the mem=<size> format should only be specified once on the
kernel command line. It acts as a single, global cap on total memory. In
contrast, the mem=<size>@<start> format can be specified multiple times
to define several distinct memory regions.
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now relocate_new_kernel_size is a .long value, which means 32bit, so its
high 32bit is undefined. This causes memcpy((void *)reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size) in machine_kexec_prepare()
access out of range memories in some cases, and then end up with an ADE
exception.
So make relocate_new_kernel_size be a .quad value, which means 64bit, to
avoid such errors.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
According to the "LoongArch Reference Manual Volume 1: Basic
Architecture", the KSave registers (SAVE0-SAVE15) are defined in
Section 7.4.16 "Data Save (SAVE)" and listed in Table 7-1 "Control
and Status Registers Overview". These registers occupy the CSR
addresses from 0x30 to 0x3F, with 16 registers in total.
This patch completes the definitions of KS9 to KS15, so as to match
the architecture specification.
Reviewed-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
are registered
The former commit has a limitation that only up to 4 FCP address
handlers could be processed per request. Although it suffices for most
use cases, it is technically a regression.
This commit lifts the restriction by reallocating the buffer from kernel
heap when more than 4 handlers are registered. The allocation is performed
within RCU read-side critical section, thus it uses GCP_ATOMIC flag. The
buffer size is rounded up to the next power of two to align with kmalloc
allocation units.
Link: https://lore.kernel.org/r/20250803122015.236493-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The former commit added reference counting to ensure safe invocations of
address handlers. Unlike the exclusive-region address handlers, all FCP
address handlers should be called on receiving an FCP request.
This commit uses the part of kernel stack to collect address handlers up
to 4 within the section, then invoke them outside of the section.
Reference counting ensures that each handler remains valid and safe to
call.
Lifting the limitation of supporting only 4 handlers is left for next
work.
Link: https://lore.kernel.org/r/20250803122015.236493-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
critical section
The previous commit added reference counting to ensure safe invocations of
address handlers.
This commit moves the invocation of handlers for exclusive regions outside
of the RCU read-side critical section. The address handler for the
requested region is selected within the critical section, then invoked
outside of it.
Link: https://lore.kernel.org/r/20250803122015.236493-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The lifetime of address handler has been managed by linked list and RCU.
This approach was introduced in commit 35202f7d8420 ("firewire: remove
global lock around address handlers, convert to RCU"). The invocations of
address handler are performed within RCU read-side critical sections.
In commit 57e6d9f85fff ("firewire: ohci: use workqueue to handle events
of AR request/response contexts"), the invocations are in a workqueue
context. The approach still imposes limitation that sleeping is not
allowed within RCU read-side critical sections. However, since sleeping
is not permitted within RCU read-side critical sections, this approach
still has a limitation.
This commit adds reference counting to decouple handler invocation from
handler discovery. The linked list and RCU is used to discover the
handlers, while the reference counting is used to invoke them safely.
Link: https://lore.kernel.org/r/20250803122015.236493-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux into block-6.17
Pull MD changes from Yu:
"- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai"
* tag 'md-6.17-20250803' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux:
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
|
|
Our testcase trigger panic:
BUG: kernel NULL pointer dereference, address: 00000000000000e0
...
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 85 Comm: kworker/2:1 Not tainted 6.16.0+ #94
PREEMPT(none)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Workqueue: md_misc md_start_sync
RIP: 0010:rdev_addable+0x4d/0xf0
...
Call Trace:
<TASK>
md_start_sync+0x329/0x480
process_one_work+0x226/0x6d0
worker_thread+0x19e/0x340
kthread+0x10f/0x250
ret_from_fork+0x14d/0x180
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: raid10
CR2: 00000000000000e0
---[ end trace 0000000000000000 ]---
RIP: 0010:rdev_addable+0x4d/0xf0
md_spares_need_change in md_start_sync will call rdev_addable which
protected by rcu_read_lock/rcu_read_unlock. This rcu context will help
protect rdev won't be released, but rdev->mddev will be set to NULL
before we call synchronize_rcu in md_kick_rdev_from_array. Fix this by
using READ_ONCE and check does rdev->mddev still alive.
Fixes: bc08041b32ab ("md: suspend array in md_start_sync() if array need reconfiguration")
Fixes: 570b9147deb6 ("md: use RCU lock to protect traversal in md_spares_need_change()")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250731114530.776670-1-yangerkun@huawei.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
The struct pool_info was originally introduced mainly to support reshape
operations, serving as a parameter for mempool_init() when raid_disks
changes. Now that mempool_create_kmalloc_pool() is sufficient for this
purpose, struct pool_info and its related code are no longer needed.
Remove struct pool_info and all associated code.
Signed-off-by: Wang Jinchao <wangjinchao600@gmail.com>
Link: https://lore.kernel.org/linux-raid/20250707012711.376844-3-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
In raid1_reshape(), newpool is a stack variable.
mempool_init() initializes newpool->wait with the stack address.
After assigning newpool to conf->r1bio_pool, the wait queue
need to be reinitialized, which is not ideal.
Change raid1_conf->r1bio_pool to a pointer type and
replace mempool_init() with mempool_create_kmalloc_pool() to
avoid referencing a stack-based wait queue.
Signed-off-by: Wang Jinchao <wangjinchao600@gmail.com>
Link: https://lore.kernel.org/linux-raid/20250707012711.376844-2-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
I am switching my address to a personal domain, so need to update the
driver's files and the entry in MAINTAINERS.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Link: https://lore.kernel.org/r/20250721170051.32407-1-kumba@gentoo.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-15-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-14-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-13-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-12-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-11-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-10-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-9-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-8-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-7-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When rv3028_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: f583c341a515f ("rtc: rv3028: add clkout support")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-6-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When pcf8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: a39a6405d5f94 ("rtc: pcf8563: add CLKOUT to common clock framework")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-5-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When pcf85063_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 8c229ab6048b7 ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-4-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When nct3018y_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 5adbaed16cc63 ("rtc: Add NCT3018Y real time clock driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-3-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When hym8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: dcaf038493525 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-2-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When ds3231_clk_sqw_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 6c6ff145b3346 ("rtc: ds1307: add clock provider support for DS3231")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-1-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This reverts commit 864f9963ec6b4b76d104d595ba28110b87158003.
The patch is wrong as it checks vc_origin against vc_screenbuf,
while in text mode it should compare against vga_vram_base.
As such it broke VGA text scrolling, which can be reproduced like this:
(1) boot a kernel that is configured to use text mode VGA-console
(2) type commands: ls -l /usr/bin | less -S
(3) scroll up/down with cursor-down/up keys
Reported-by: Jari Ruusu <jariruusu@protonmail.com>
Cc: stable@vger.kernel.org
Cc: Yi Yang <yiyang13@huawei.com>
Cc: GONG Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This issue triggers when a userspace program does an ioctl
FBIOPUT_CON2FBMAP by passing console number and frame buffer number.
Ideally this maps console to frame buffer and updates the screen if
console is visible.
As part of mapping it has to do resize of console according to frame
buffer info. if this resize fails and returns from vc_do_resize() and
continues further. At this point console and new frame buffer are mapped
and sets display vars. Despite failure still it continue to proceed
updating the screen at later stages where vc_data is related to previous
frame buffer and frame buffer info and display vars are mapped to new
frame buffer and eventully leading to out-of-bounds write in
fast_imageblit(). This bheviour is excepted only when fg_console is
equal to requested console which is a visible console and updates screen
with invalid struct references in fbcon_putcs().
Reported-and-tested-by: syzbot+c4b7aa0513823e2ea880@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c4b7aa0513823e2ea880
Signed-off-by: Sravan Kumar Gundu <sravankumarlpu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
RISC-V SoC I've never seen before.
Core changes:
- Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
macro only used in one place
- Add pinmux_generic_add_pinfunction() helper and use this in a few
drivers
New drivers:
- Amlogic S7, S7D and S6 pin control support
- Eswin EIC7700 pin control support
- Qualcomm PMIV0104, PM7550 and Milos pin control support
Because of unhelpful numbering schemes, the Qualcomm driver now
needs to start to rely on SoC codenames
- STM32 HDP pin control support
- Mediatek MT8189 pin control support
Improvements:
- Switch remaining pin control drivers over to the new GPIO set
callback that provides a return value
- Support RSVD (reserved) pins in the STM32 driver
- Move many fixed assignments over to pinctrl_desc definitions
- Handle multiple TLMM regions in the Qualcomm driver"
* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: mediatek: Add pinctrl driver for mt8189
dt-bindings: pinctrl: mediatek: Add support for mt8189
pinctrl: aspeed-g6: Add PCIe RC PERST pin group
pinctrl: ingenic: use pinmux_generic_add_pinfunction()
pinctrl: keembay: use pinmux_generic_add_pinfunction()
pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
pinctrl: airoha: use pinmux_generic_add_pinfunction()
pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
pinctrl: provide pinmux_generic_add_pinfunction()
pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
pinctrl: ma35: use new GPIO line value setter callbacks
MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
pinctrl: stm32: Introduce HDP driver
dt-bindings: pinctrl: stm32: Introduce HDP
pinctrl: qcom: Add Milos pinctrl driver
dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
pinctrl: qcom: spmi: Add PM7550
dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
pinctrl: qcom: spmi: Add PMIV0104
dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
...
|
|
The mempool wake-up fix introduced in commit a5867a218d7c ("mm: mempool:
fix wake-up edge case bug for zero-minimum pools") inlined the
add_element() logic in mempool_free() to return the element to the
zero-minimum pool:
pool->elements[pool->curr_nr++] = element;
This causes crash, because mempool_init_node() does not initialize with
real allocation for zero-minimum pool, it only returns ZERO_SIZE_PTR to
the elements array which is unable to be dereferenced, and the
pre-allocation of this array never happened since the while test:
while (pool->curr_nr < pool->min_nr)
can never be satisfied as min_nr is zero, so the pool does not actually
reserve any buffer, the only way so far is to call alloc_fn() to get
buffer from SLUB, but if the memory is under high pressure the alloc_fn()
could never get any buffer, the waiting thread would be in an indefinite
loop of wake-sleep in a period until there is free memory to get.
This patch changes mempool_init_node() to allocate 1 element for the
elements array of zero-minimum pool, so that the pool will have reserved
buffer to use. This will fix the crash issue and let the waiting thread
can get the reserved element when alloc_fn() failed to get buffer under
high memory pressure.
Also modify add_element() to support zero-minimum pool with simplifying
codes of zero-minimum handling in mempool_free().
Link: https://lkml.kernel.org/r/e01f00f3-58d9-4ca7-af54-bfa42fec9527@suse.com
Fixes: a5867a218d7c ("mm: mempool: fix wake-up edge case bug for zero-minimum pools")
Signed-off-by: Yadan Fan <ydfan@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several functions refer to the unfortunately named 'vm_flags' field when
referencing vmalloc flags, which happens to be the precise same name used
for VMA flags.
As a result these were erroneously changed to use the vm_flags_t type
(which currently is a typedef equivalent to unsigned long).
Currently this has no impact, but in future when vm_flags_t changes this
will result in issues, so change the type to unsigned long to account for
this.
[lorenzo.stoakes@oracle.com: fixup very disguised vmalloc flags parameter]
Link: https://lkml.kernel.org/r/e74dd8de-7e60-47ab-8a45-2c851f3c5d26@lucifer.local
Link: https://lkml.kernel.org/r/20250729114906.55347-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Harry Yoo <harry.yoo@oracle.com>
Closes: https://lore.kernel.org/all/aIgSpAnU8EaIcqd9@hyeyoo/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the swapin failed, don't update the major fault count. There is a long
existing comment for doing it this way, now with previous cleanups, we can
finally fix it.
Link: https://lkml.kernel.org/r/20250728075306.12704-9-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of calculating the swap entry differently in different swapin
paths, calculate it early before the swap cache lookup and use that for
the lookup and later swapin. And after swapin have brought a folio,
simply round it down against the size of the folio.
This is simple and effective enough to verify the swap value. A folio's
swap entry is always aligned by its size. Any kind of parallel split or
race is acceptable because the final shmem_add_to_page_cache ensures that
all entries covered by the folio are correct, and thus there will be no
data corruption.
This also prevents false positive cache lookup. If a shmem read request's
index points to the middle of a large swap entry, previously, shmem will
try the swap cache lookup using the large swap entry's starting value
(which is the first sub swap entry of this large entry). This will lead
to false positive lookup results if only the first few swap entries are
cached but the actual requested swap entry pointed by the index is
uncached. This is not a rare event, as swap readahead always tries to
cache order 0 folios when possible.
And this shouldn't cause any increased repeated faults. Instead, no
matter how the shmem mapping is split in parallel, as long as the mapping
still contains the right entries, the swapin will succeed.
The final object size and stack usage are also reduced due to simplified
code:
./scripts/bloat-o-meter mm/shmem.o.old mm/shmem.o
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-145 (-145)
Function old new delta
shmem_swapin_folio 4056 3911 -145
Total: Before=33242, After=33097, chg -0.44%
Stack usage (Before vs After):
mm/shmem.c:2314:12:shmem_swapin_folio 264 static
mm/shmem.c:2314:12:shmem_swapin_folio 256 static
And while at it, round down the index too if swap entry is round down.
The index is used either for folio reallocation or confirming the mapping
content. In either case, it should be aligned with the swap folio.
Link: https://lkml.kernel.org/r/20250728075306.12704-8-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Slightly tidy up the different handling of swap in and error handling for
SWP_SYNCHRONOUS_IO and non-SWP_SYNCHRONOUS_IO devices. Now swapin will
always use either shmem_swap_alloc_folio or shmem_swapin_cluster, then
check the result.
Simplify the control flow and avoid a redundant goto label.
Link: https://lkml.kernel.org/r/20250728075306.12704-7-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For SWP_SYNCHRONOUS_IO devices, if a cache bypassing THP swapin failed due
to reasons like memory pressure, partially conflicting swap cache or ZSWAP
enabled, shmem will fallback to cached order 0 swapin.
Right now the swap cache still has a non-trivial overhead, and readahead
is not helpful for SWP_SYNCHRONOUS_IO devices, so we should always skip
the readahead and swap cache even if the swapin falls back to order 0.
So handle the fallback logic without falling back to the cached read.
Link: https://lkml.kernel.org/r/20250728075306.12704-6-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of keeping different paths of splitting the entry before the swap
in start, move the entry splitting after the swapin has put the folio in
swap cache (or set the SWAP_HAS_CACHE bit). This way we only need one
place and one unified way to split the large entry. Whenever swapin
brought in a folio smaller than the shmem swap entry, split the entry and
recalculate the entry and index for verification.
This removes duplicated codes and function calls, reduces LOC, and the
split is less racy as it's guarded by swap cache now. So it will have a
lower chance of repeated faults due to raced split. The compiler is also
able to optimize the coder further:
bloat-o-meter results with GCC 14:
With DEBUG_SECTION_MISMATCH (-fno-inline-functions-called-once):
./scripts/bloat-o-meter mm/shmem.o.old mm/shmem.o
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-143 (-143)
Function old new delta
shmem_swapin_folio 2358 2215 -143
Total: Before=32933, After=32790, chg -0.43%
With !DEBUG_SECTION_MISMATCH:
add/remove: 0/1 grow/shrink: 1/0 up/down: 1069/-749 (320)
Function old new delta
shmem_swapin_folio 2871 3940 +1069
shmem_split_large_entry.isra 749 - -749
Total: Before=32806, After=33126, chg +0.98%
Since shmem_split_large_entry is only called in one place now. The
compiler will either generate more compact code, or inlined it for
better performance.
Link: https://lkml.kernel.org/r/20250728075306.12704-5-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move all THP swapin related checks under CONFIG_TRANSPARENT_HUGEPAGE, so
they will be trimmed off by the compiler if not needed.
And add a WARN if shmem sees a order > 0 entry when
CONFIG_TRANSPARENT_HUGEPAGE is disabled, that should never happen unless
things went very wrong.
There should be no observable feature change except the new added WARN.
Link: https://lkml.kernel.org/r/20250728075306.12704-4-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/shmem, swap: bugfix and improvement of mTHP swap in", v6.
The current THP swapin path have several problems. It may potentially
hang, may cause redundant faults due to false positive swap cache lookup,
and it issues redundant Xarray walks. !CONFIG_TRANSPARENT_HUGEPAGE builds
may also contain unnecessary THP checks.
This series fixes all of the mentioned issues, the code should be more
robust and prepared for the swap table series. Now 4 walks is reduced to
3 (get order & confirm, confirm, insert folio),
!CONFIG_TRANSPARENT_HUGEPAGE build overhead is also minimized, and comes
with a sanity check now.
The performance is slightly better after this series, sequential swap in
of 24G data from ZRAM, using transparent_hugepage_tmpfs=always (24 samples
each):
Before: avg: 10.66s, stddev: 0.04
After patch 1: avg: 10.58s, stddev: 0.04
After patch 2: avg: 10.65s, stddev: 0.05
After patch 3: avg: 10.65s, stddev: 0.04
After patch 4: avg: 10.67s, stddev: 0.04
After patch 5: avg: 9.79s, stddev: 0.04
After patch 6: avg: 9.79s, stddev: 0.05
After patch 7: avg: 9.78s, stddev: 0.05
After patch 8: avg: 9.79s, stddev: 0.04
Several patches improve the performance by a little, which is about ~8%
faster in total.
Build kernel test showed very slightly improvement, testing with make -j48
with defconfig in a 768M memcg also using ZRAM as swap, and
transparent_hugepage_tmpfs=always (6 test runs):
Before: avg: 3334.66s, stddev: 43.76
After patch 1: avg: 3349.77s, stddev: 18.55
After patch 2: avg: 3325.01s, stddev: 42.96
After patch 3: avg: 3354.58s, stddev: 14.62
After patch 4: avg: 3336.24s, stddev: 32.15
After patch 5: avg: 3325.13s, stddev: 22.14
After patch 6: avg: 3285.03s, stddev: 38.95
After patch 7: avg: 3287.32s, stddev: 26.37
After patch 8: avg: 3295.87s, stddev: 46.24
This patch (of 7):
Currently shmem calls xa_get_order to get the swap radix entry order,
requiring a full tree walk. This can be easily combined with the swap
entry value checking (shmem_confirm_swap) to avoid the duplicated lookup
and abort early if the entry is gone already. Which should improve the
performance.
Link: https://lkml.kernel.org/r/20250728075306.12704-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20250728075306.12704-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
