summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-21ARM: S3C64XX: Use generic s3c_set_platdata for OneNANDBanajit Goswami
Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: SAMSUNG: Use generic s3c_set_platdata for NANDBanajit Goswami
Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCIBanajit Goswami
Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: SAMSUNG: Use generic s3c_set_platdata for HWMONBanajit Goswami
Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: SAMSUNG: Use generic s3c_set_platdata for FBBanajit Goswami
Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: SAMSUNG: Use generic s3c_set_platdata for TSBanajit Goswami
Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: S3C64XX: Add PWM backlight support on SMDK6410Banajit Goswami
This patch adds support for LCD backlight using PWM timer for Samsung SMDK6410 board. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: S5P64X0: Add PWM backlight support on SMDK6450Banajit Goswami
This patch adds support for LCD backlight using PWM timer for Samsung SMDK6450 board. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: S5P64X0: Add PWM backlight support on SMDK6440Banajit Goswami
This patch adds support for LCD backlight using PWM timer for Samsung SMDK6440 board. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: S5PC100: Add PWM backlight support on SMDKC100Banajit Goswami
This patch adds support for LCD backlight using PWM timer for Samsung SMDKC100 board. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: S5PV210: Add PWM backlight support on SMDKV210Banajit Goswami
This patch adds support for LCD backlight using PWM timer for Samsung SMDKV210 board. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: EXYNOS4: Add PWM backlight support on SMDKC210Banajit Goswami
This patch adds support for LCD backlight using PWM timer for Samsung SMDKC210 board. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: EXYNOS4: Add PWM backlight support on SMDKV310Banajit Goswami
This patch adds support for LCD backlight using PWM timer for Samsung SMDKV310 board. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: SAMSUNG: Create a common infrastructure for PWM backlight supportBanajit Goswami
This patch creates a common structure for LCD backlight using PWM timer to be used by various Samsung boards. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21clocksource: convert 32-bit down counting clocksource on S5PV210/S5P64X0Chanwoo Choi
Convert the S5PV210/S5P64X0 32-bit down-counting clocksource to the generic mmio clocksource infrastructure Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: SAMSUNG: Move duplicate code for SPDIF opsNaveen Krishna Chatradhi
Move the duplicated code for SPDIF ops from S5PV210 and S5PC100. So, the same can be used in EXYNOS4. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: SAMSUNG: Cleanup I2C code in plat-samsungNaveen Krishna Chatradhi
Removes the duplication of default info structure in dev-i2c[0 ~ 7].c files Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: SAMSUNG: Use generic set_plat_data functionNaveen Krishna Chatradhi
Calls the generic s3c_set_platdata function instead. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21Merge branch 'next-samsung-clkdev-fix' into next-samsung-cleanupKukjin Kim
2011-07-21ARM: S3C64XX: Convert to using REGULATOR_SUPPLY() on SMDK6410Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: SAMSUNG: Added mach/clkdev.hThomas Abraham
This is temporary patch for building with clkdev. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: EXYNOS4: Add clkdev supportThomas Abraham
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> [kgene.kim@samsung.com: removed changes of mach-exynos4/time.c] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20sched: Avoid creating superfluous NUMA domains on non-NUMA systemsPeter Zijlstra
When creating sched_domains, stop when we've covered the entire target span instead of continuing to create domains, only to later find they're redundant and throw them away again. This avoids single node systems from touching funny NUMA sched_domain creation code and reduces the risks of the new SD_OVERLAP code. Requested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Anton Blanchard <anton@samba.org> Cc: mahesh@linux.vnet.ibm.com Cc: benh@kernel.crashing.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1311180177.29152.57.camel@twins Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21ARM: EXYNOS4: Add platform device for dwmci driverSeungwon Jeon
This patch adds platform device for Synopsys DesignWare Multimedia Card Interface driver. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: EXYNOS4: configure rtc-s3c on NURIMyungJoo Ham
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: EXYNOS4: configure MAX8903 secondary charger on NURIMyungJoo Ham
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: EXYNOS4: configure ADC on NURIMyungJoo Ham
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: EXYNOS4: configure MAX17042 fuel gauge on NURIMyungJoo Ham
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURIMyungJoo Ham
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: Fix build - inclusion of max8997-private.h] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20sched: Allow for overlapping sched_domain spansPeter Zijlstra
Allow for sched_domain spans that overlap by giving such domains their own sched_group list instead of sharing the sched_groups amongst each-other. This is needed for machines with more than 16 nodes, because sched_domain_node_span() will generate a node mask from the 16 nearest nodes without regard if these masks have any overlap. Currently sched_domains have a sched_group that maps to their child sched_domain span, and since there is no overlap we share the sched_group between the sched_domains of the various CPUs. If however there is overlap, we would need to link the sched_group list in different ways for each cpu, and hence sharing isn't possible. In order to solve this, allocate private sched_groups for each CPU's sched_domain but have the sched_groups share a sched_group_power structure such that we can uniquely track the power. Reported-and-tested-by: Anton Blanchard <anton@samba.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-08bxqw9wis3qti9u5inifh3y@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-20sched: Break out cpu_power from the sched_group structurePeter Zijlstra
In order to prepare for non-unique sched_groups per domain, we need to carry the cpu_power elsewhere, so put a level of indirection in. Reported-and-tested-by: Anton Blanchard <anton@samba.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-qkho2byuhe4482fuknss40ad@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21ARM: S3C64XX: Configure backup battery charger on CragganmoreMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: S3C64XX: Fix WM8915 IRQ polarity on CragganmoreMark Brown
The chip IRQ output is genuinely an IRQ output rather than /IRQ output by default - this had been working due to an interface issue with the IRQ controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: S3C64XX: Configure supplies for all Cragganmore regulatorsMark Brown
All the regulators on the system are supplied from the fixed wall supply. While there's no functional value in telling the regulator core this it does ensure that as a regulator maintainer I'll be exercising the supply logic frequently. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: S3C64XX: Refresh Cragganmore supportMark Brown
The original Cragganmore code was submitted while new code was being refused for mainline. This patch was unexpectedly merged upstream but development had continued in the expectation that the code would be resubmitted later so no split patches were maintained. This patch synchronises that work with the recently merged driver. The main changes are fleshing out of the PMIC and audio integration for the system, including addition of the Dallas Dhu and Tobermory audio modules, plus some minor updates to account for revision 2 hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: S3C64XX: Initial support for Wolfson/Simtec Cragganmore/BanffMark Brown
The Cragganmore carrier card and Banff CPU module are used on Wolfson Microelectronics reference systems. This initial support covers the core system which is a fairly generic S3C6410 based design, further patches will add support for the key features of the reference system. The initial board bringup and therefore much of the key code was done by Ben Dooks for Simtec, with additional work (especially around the integration of the Wolfson devices) being done by myself. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: removed inclusion of <mach/regs-fb.h>] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-21ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQsMyungJoo Ham
MAX8997/17042, which are used by Exynos4-NURI, use additional IRQ numbers after GPIO's IRQs. The patch creates some room for those devices. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20kbuild: silence generated makefile messagePeter Foley
This patch silences the "make -C /usr/src/git O=/usr/src/git/build/." message shown when using the generated makefile in KBUILD_OUTDIR. Signed-off-by: Peter Foley <pefoley2@verizon.net> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-20ARM: S5PV210: Support ADCMyungJoo Ham
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Support ADCMyungJoo Ham
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: SAMSUNG: Revise PM for 12-bit ADC operationsMyungJoo Ham
- Fixed: 12bit precision is lost at suspend/resume - Updated: use pm_dev_ops Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: SAMSUNG: ADC Channel selectionMyungJoo Ham
In S5PV210/S5PC110/EXYNOS4, ADCMUX channel selection uses ADCMUX register, not ADCCON register. This patch corrects the behavior of SAMSUNG-ADC for such CPUs. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: SAMSUNG: use regulator VDD for ADCMyungJoo Ham
This patch allows the Samsung ADC driver to enable VDD regulator at probe and resume and to disable at exit and suspend. In a platform where ADC's VDD regulator is not "always-on", this control is required although this patch does not provide fine-grained power control (turning on the regulator only when being accessed). However, if VDD regulator ("vdd" for the adc device) is not provided, the regulator control will not be activated because there are platforms that do not provide regulator for ADC device. arch_initcall has been modified to module_init in order to allow regulators to be available at probe. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add save/restore function for PLLJaecheol Lee
The PLL restore routine supports waiting pll locking. If PLL is enabled in restoring sequence, it should wait until PLL is locked. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add save/restore for other ARM registersJaecheol Lee
This patch adds save/restore values for Power Control Register and Diagnostic Register for PM. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Move S5P_CENTRAL_SEQ_CONFIGURATION setting for PMJaecheol Lee
We need to balance between set and check S5P_CENTRAL_SEQ_CONFIGURATION register in syscore_ops suspend/resume function when failure in enter suspend mode. Moved this register setting for PM for the purpose of balancing. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Support early wakeup entering sleep modeJaecheol Lee
Since early wakeup can be handled in pm so we don't need masking interrupts of external GIC. When the early wakeup interrupt happens, PMU(Power Management Unit) ignores WFI instruction. This means that PC(Program Counter) passed without any changes. This patch can handle that case by early wakeup interrupt. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> [kgene.kim@samsung.com: fixed return of exynos4_cpu_suspend()] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Remove PMU configuration for S2RAMJaecheol Lee
PMU(Power Management Unit) configuraion for S2RAM(SLEEP) is removed and using function which provided by PMU support code to configure PMU register. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Support system level power down configurationJaecheol Lee
EXYNOS4 supports 3 different system level power down mode by PMU (Power Management Unit). Each power down mode need to configure many PMU registers with different value. This patch supports function to configure PMU registers with pre-defined values in PMU code. This function may be used by PM code and AFTR/LPA support driver. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add SPDIF for SMDKV310Naveen Krishna Chatradhi
This patch adds spdif to the machine supported device list for SMDKV310. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit (git 2.34.1) at 2025-09-14 21:42:58 +0000