summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-02bus: fsl-mc: MC control registers are not always availableLaurentiu Tudor
As per the device tree binding, in certain scenarios such as virtualization scenarios, the MC control registers are not available so don't error out if they are not present. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200914105459.27448-2-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: fsl-mc: don't assume an iommu is always presentLaurentiu Tudor
There are certain scenarios where an iommu is not present, e.g. booting in a VM. Let's support these scenarios by dropping the check. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200914105459.27448-1-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02drivers core: node: Use a more typical macro definition style for ACCESS_ATTRJoe Perches
Remove the trailing semicolon from the macro and add it to its uses. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/faf51a671160cf884efa68fb458d3e8a44b1a7a7.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_showJoe Perches
Do not indirect the bitmap printing of these shared_cpu show functions by using cpumap_print_to_pagebuf/bitmap_print_to_pagebuf. Use the more typical style with the vsnprintf %*pb and %*pbl extensions directly so there is no possible mixup about the use of offset_in_page(buf) by bitmap_print_to_pagebuf. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/80457b467ab6cde13a173cfd8a4f49cd8467a7fd.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emitJoe Perches
Convert the unbound sprintf in hugetlb_report_node_meminfo to use sysfs_emit_at so that no possible overrun of a PAGE_SIZE buf can occur. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Link: https://lore.kernel.org/r/894b351b82da6013cde7f36ff4b5493cd0ec30d0.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02Merge branch 'for-next/mte' into for-next/coreWill Deacon
Add userspace support for the Memory Tagging Extension introduced by Armv8.5. (Catalin Marinas and others) * for-next/mte: (30 commits) arm64: mte: Fix typo in memory tagging ABI documentation arm64: mte: Add Memory Tagging Extension documentation arm64: mte: Kconfig entry arm64: mte: Save tags when hibernating arm64: mte: Enable swap of tagged pages mm: Add arch hooks for saving/restoring tags fs: Handle intra-page faults in copy_mount_options() arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset arm64: mte: ptrace: Add PTRACE_{PEEK,POKE}MTETAGS support arm64: mte: Allow {set,get}_tagged_addr_ctrl() on non-current tasks arm64: mte: Restore the GCR_EL1 register after a suspend arm64: mte: Allow user control of the generated random tags via prctl() arm64: mte: Allow user control of the tag check mode via prctl() mm: Allow arm64 mmap(PROT_MTE) on RAM-based files arm64: mte: Validate the PROT_MTE request via arch_validate_flags() mm: Introduce arch_validate_flags() arm64: mte: Add PROT_MTE support to mmap() and mprotect() mm: Introduce arch_calc_vm_flag_bits() arm64: mte: Tags-aware aware memcmp_pages() implementation arm64: Avoid unnecessary clear_user_page() indirection ...
2020-10-02Merge branch 'for-next/ghostbusters' into for-next/coreWill Deacon
Fix and subsequently rewrite Spectre mitigations, including the addition of support for PR_SPEC_DISABLE_NOEXEC. (Will Deacon and Marc Zyngier) * for-next/ghostbusters: (22 commits) arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option arm64: Pull in task_stack_page() to Spectre-v4 mitigation code KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled arm64: Get rid of arm64_ssbd_state KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state() KVM: arm64: Get rid of kvm_arm_have_ssbd() KVM: arm64: Simplify handling of ARCH_WORKAROUND_2 arm64: Rewrite Spectre-v4 mitigation code arm64: Move SSBD prctl() handler alongside other spectre mitigation code arm64: Rename ARM64_SSBD to ARM64_SPECTRE_V4 arm64: Treat SSBS as a non-strict system feature arm64: Group start_thread() functions together KVM: arm64: Set CSV2 for guests on hardware unaffected by Spectre-v2 arm64: Rewrite Spectre-v2 mitigation code arm64: Introduce separate file for spectre mitigations and reporting arm64: Rename ARM64_HARDEN_BRANCH_PREDICTOR to ARM64_SPECTRE_V2 KVM: arm64: Simplify install_bp_hardening_cb() KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE arm64: Remove Spectre-related CONFIG_* options arm64: Run ARCH_WORKAROUND_2 enabling code on all CPUs ...
2020-10-02drivers core: Miscellaneous changes for sysfs_emitJoe Perches
Change additional instances that could use sysfs_emit and sysfs_emit_at that the coccinelle script could not convert. o macros creating show functions with ## concatenation o unbound sprintf uses with buf+len for start of output to sysfs_emit_at o returns with ?: tests and sprintf to sysfs_emit o sysfs output with struct class * not struct device * arguments Miscellanea: o remove unnecessary initializations around these changes o consistently use int len for return length of show functions o use octal permissions and not S_<FOO> o rename a few show function names so DEVICE_ATTR_<FOO> can be used o use DEVICE_ATTR_ADMIN_RO where appropriate o consistently use const char *output for strings o checkpatch/style neatening Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/8bc24444fe2049a9b2de6127389b57edfdfe324d.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02drivers core: Reindent a couple uses around sysfs_emitJoe Perches
Just a couple of whitespace realignment to open parenthesis for multi-line statements. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/33224191421dbb56015eded428edfddcba997d63.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02drivers core: Remove strcat uses around sysfs_emit and neatenJoe Perches
strcat is no longer necessary for sysfs_emit and sysfs_emit_at uses. Convert the strcat uses to sysfs_emit calls and neaten other block uses of direct returns to use an intermediate const char *. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/5d606519698ce4c8f1203a2b35797d8254c6050a.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functionsJoe Perches
Convert the various sprintf fmaily calls in sysfs device show functions to sysfs_emit and sysfs_emit_at for PAGE_SIZE buffer safety. Done with: $ spatch -sp-file sysfs_emit_dev.cocci --in-place --max-width=80 . And cocci script: $ cat sysfs_emit_dev.cocci @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - sprintf(buf, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - strcpy(buf, chr); + sysfs_emit(buf, chr); ...> } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - sprintf(buf, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... - len += scnprintf(buf + len, PAGE_SIZE - len, + len += sysfs_emit_at(buf, len, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { ... - strcpy(buf, chr); - return strlen(buf); + return sysfs_emit(buf, chr); } Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/3d033c33056d88bbe34d4ddb62afd05ee166ab9a.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02Merge branches 'for-next/acpi', 'for-next/boot', 'for-next/bpf', ↵Will Deacon
'for-next/cpuinfo', 'for-next/fpsimd', 'for-next/misc', 'for-next/mm', 'for-next/pci', 'for-next/perf', 'for-next/ptrauth', 'for-next/sdei', 'for-next/selftests', 'for-next/stacktrace', 'for-next/svm', 'for-next/topology', 'for-next/tpyos' and 'for-next/vdso' into for-next/core Remove unused functions and parameters from ACPI IORT code. (Zenghui Yu via Lorenzo Pieralisi) * for-next/acpi: ACPI/IORT: Remove the unused inline functions ACPI/IORT: Drop the unused @ops of iort_add_device_replay() Remove redundant code and fix documentation of caching behaviour for the HVC_SOFT_RESTART hypercall. (Pingfan Liu) * for-next/boot: Documentation/kvm/arm: improve description of HVC_SOFT_RESTART arm64/relocate_kernel: remove redundant code Improve reporting of unexpected kernel traps due to BPF JIT failure. (Will Deacon) * for-next/bpf: arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM Improve robustness of user-visible HWCAP strings and their corresponding numerical constants. (Anshuman Khandual) * for-next/cpuinfo: arm64/cpuinfo: Define HWCAP name arrays per their actual bit definitions Cleanups to handling of SVE and FPSIMD register state in preparation for potential future optimisation of handling across syscalls. (Julien Grall) * for-next/fpsimd: arm64/sve: Implement a helper to load SVE registers from FPSIMD state arm64/sve: Implement a helper to flush SVE registers arm64/fpsimdmacros: Allow the macro "for" to be used in more cases arm64/fpsimdmacros: Introduce a macro to update ZCR_EL1.LEN arm64/signal: Update the comment in preserve_sve_context arm64/fpsimd: Update documentation of do_sve_acc Miscellaneous changes. (Tian Tao and others) * for-next/misc: arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE arm64: mm: Fix missing-prototypes in pageattr.c arm64/fpsimd: Fix missing-prototypes in fpsimd.c arm64: hibernate: Remove unused including <linux/version.h> arm64/mm: Refactor {pgd, pud, pmd, pte}_ERROR() arm64: Remove the unused include statements arm64: get rid of TEXT_OFFSET arm64: traps: Add str of description to panic() in die() Memory management updates and cleanups. (Anshuman Khandual and others) * for-next/mm: arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op arm64/mm: Unify CONT_PMD_SHIFT arm64/mm: Unify CONT_PTE_SHIFT arm64/mm: Remove CONT_RANGE_OFFSET arm64/mm: Enable THP migration arm64/mm: Change THP helpers to comply with generic MM semantics arm64/mm/ptdump: Add address markers for BPF regions Allow prefetchable PCI BARs to be exposed to userspace using normal non-cacheable mappings. (Clint Sbisa) * for-next/pci: arm64: Enable PCI write-combine resources under sysfs Perf/PMU driver updates. (Julien Thierry and others) * for-next/perf: perf: arm-cmn: Fix conversion specifiers for node type perf: arm-cmn: Fix unsigned comparison to less than zero arm_pmu: arm64: Use NMIs for PMU arm_pmu: Introduce pmu_irq_ops KVM: arm64: pmu: Make overflow handler NMI safe arm64: perf: Defer irq_work to IPI_IRQ_WORK arm64: perf: Remove PMU locking arm64: perf: Avoid PMXEV* indirection arm64: perf: Add missing ISB in armv8pmu_enable_counter() perf: Add Arm CMN-600 PMU driver perf: Add Arm CMN-600 DT binding arm64: perf: Add support caps under sysfs drivers/perf: thunderx2_pmu: Fix memory resource error handling drivers/perf: xgene_pmu: Fix uninitialized resource struct perf: arm_dsu: Support DSU ACPI devices arm64: perf: Remove unnecessary event_idx check drivers/perf: hisi: Add missing include of linux/module.h arm64: perf: Add general hardware LLC events for PMUv3 Support for the Armv8.3 Pointer Authentication enhancements. (By Amit Daniel Kachhap) * for-next/ptrauth: arm64: kprobe: clarify the comment of steppable hint instructions arm64: kprobe: disable probe of fault prone ptrauth instruction arm64: cpufeature: Modify address authentication cpufeature to exact arm64: ptrauth: Introduce Armv8.3 pointer authentication enhancements arm64: traps: Allow force_signal_inject to pass esr error code arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions Tonnes of cleanup to the SDEI driver. (Gavin Shan) * for-next/sdei: firmware: arm_sdei: Remove _sdei_event_unregister() firmware: arm_sdei: Remove _sdei_event_register() firmware: arm_sdei: Introduce sdei_do_local_call() firmware: arm_sdei: Cleanup on cross call function firmware: arm_sdei: Remove while loop in sdei_event_unregister() firmware: arm_sdei: Remove while loop in sdei_event_register() firmware: arm_sdei: Remove redundant error message in sdei_probe() firmware: arm_sdei: Remove duplicate check in sdei_get_conduit() firmware: arm_sdei: Unregister driver on error in sdei_init() firmware: arm_sdei: Avoid nested statements in sdei_init() firmware: arm_sdei: Retrieve event number from event instance firmware: arm_sdei: Common block for failing path in sdei_event_create() firmware: arm_sdei: Remove sdei_is_err() Selftests for Pointer Authentication and FPSIMD/SVE context-switching. (Mark Brown and Boyan Karatotev) * for-next/selftests: selftests: arm64: Add build and documentation for FP tests selftests: arm64: Add wrapper scripts for stress tests selftests: arm64: Add utility to set SVE vector lengths selftests: arm64: Add stress tests for FPSMID and SVE context switching selftests: arm64: Add test for the SVE ptrace interface selftests: arm64: Test case for enumeration of SVE vector lengths kselftests/arm64: add PAuth tests for single threaded consistency and differently initialized keys kselftests/arm64: add PAuth test for whether exec() changes keys kselftests/arm64: add nop checks for PAuth tests kselftests/arm64: add a basic Pointer Authentication test Implementation of ARCH_STACKWALK for unwinding. (Mark Brown) * for-next/stacktrace: arm64: Move console stack display code to stacktrace.c arm64: stacktrace: Convert to ARCH_STACKWALK arm64: stacktrace: Make stack walk callback consistent with generic code stacktrace: Remove reliable argument from arch_stack_walk() callback Support for ASID pinning, which is required when sharing page-tables with the SMMU. (Jean-Philippe Brucker) * for-next/svm: arm64: cpufeature: Export symbol read_sanitised_ftr_reg() arm64: mm: Pin down ASIDs for sharing mm with devices Rely on firmware tables for establishing CPU topology. (Valentin Schneider) * for-next/topology: arm64: topology: Stop using MPIDR for topology information Spelling fixes. (Xiaoming Ni and Yanfei Xu) * for-next/tpyos: arm64/numa: Fix a typo in comment of arm64_numa_init arm64: fix some spelling mistakes in the comments by codespell vDSO cleanups. (Will Deacon) * for-next/vdso: arm64: vdso: Fix unusual formatting in *setup_additional_pages() arm64: vdso32: Remove a bunch of #ifdef CONFIG_COMPAT_VDSO guards
2020-10-02usb: dwc2: Fix INTR OUT transfers in DDMA mode.Minas Harutyunyan
In DDMA mode if INTR OUT transfers mps not multiple of 4 then single packet corresponds to single descriptor. Descriptor limit set to mps and desc chain limit set to mps * MAX_DMA_DESC_NUM_GENERIC. On that descriptors complete, to calculate transfer size should be considered correction value for each descriptor. In start request function, if "continue" is true then dma buffer address should be incremmented by offset for all type of transfers, not only for Control DATA_OUT transfers. Fixes: cf77b5fb9b394 ("usb: dwc2: gadget: Transfer length limit checking for DDMA") Fixes: e02f9aa6119e0 ("usb: dwc2: gadget: EP 0 specific DDMA programming") Fixes: aa3e8bc81311e ("usb: dwc2: gadget: DDMA transfer start and complete") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCsAmelie Delaunay
If usb-role-switch is present in the device tree, it means that ID and Vbus signals are not connected to the OTG controller but to an external component (GPIOs, Type-C controller). In this configuration, usb role switch is used to force valid sessions on STM32MP15 SoCs. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: override PHY input signals with usb role switch supportAmelie Delaunay
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals. iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0. avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02dt-bindings: usb: dwc2: add optional usb-role-switch propertyAmelie Delaunay
This patch documents the usb-role-switch property in dwc2 bindings, now that usb-role-switch support is available in dwc2 driver. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platformWan Ahmad Zainie
Add compatible string to use this generic glue layer to support Intel Keem Bay platform's dwc3 controller. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02dt-bindings: usb: Add Intel Keem Bay USB controller bindingsWan Ahmad Zainie
Binding description for Intel Keem Bay USB controller. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: gadget: Support up to max stream idThinh Nguyen
DWC3 IPs can use the maximum stream id (up to 2^16) specified by the USB 3.x specs. Don't limit to stream id 2^15 only. Note that this does not reflect the number of concurrent streams the controller handles internally. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs outputJoe Perches
Output defects can exist in sysfs content using sprintf and snprintf. sprintf does not know the PAGE_SIZE maximum of the temporary buffer used for outputting sysfs content and it's possible to overrun the PAGE_SIZE buffer length. Add a generic sysfs_emit function that knows that the size of the temporary buffer and ensures that no overrun is done. Add a generic sysfs_emit_at function that can be used in multiple call situations that also ensures that no overrun is done. Validate the output buffer argument to be page aligned. Validate the offset len argument to be within the PAGE_SIZE buf. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/884235202216d464d61ee975f7465332c86f76b2.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02w1: w1_therm: Add support for GXCAS GX20MH01 device.Ivan Zaentsev
GX20MH01 device shares family number 0x28 with DS18B20. The device is generally compatible with DS18B20. Added are the lowest 2^-5, 2^-6 temperature bits in Config register; R2 bit in Config register enabling 13 and 14 bit resolutions. It is powered up in 14 bit mode. Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20200904160004.87710-2-ivan.zaentsev@wirenboard.ru Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02w1: w1_therm: Add sysfs entries to control conversion time and driver featuresIvan Zaentsev
The conversion time of common DS18B20 clones deviates from datasheet specs. Allow adjustment and automatic measure of the conversion time. Add 'conv_time' sysfs attribute: *read*: Current conversion time in milliseconds. *write*: '0': Set default conversion time. '1': Measure and set the conversion time. Make a single temperature conversion, poll and measure an actual value. Measured value is increased by 20% for temperature drift. A new conversion time is returned by reading the same attribute. other positive value: Set the conversion time in milliseconds. The setting is active until a resolution change. Then it is reset to default conversion time for a new resolution. Add 'features' sysfs attribute to control optional driver settings per device. Bit masks to read/write (logical OR): 1: Enable check for conversion success. If byte 6 of scratchpad memory is 0xC after conversion, and temperature reads 85.00 (powerup value) or 127.94 (insufficient power) - return a conversion error. 2: Enable poll for conversion completion. Generate read cycles after the conversion start and wait for 1's. In parasite power mode this feature is not available. There are some clones of DS18B20 with fixed 12 bit resolution. Make the driver verify the resolution by reading back the device after resolution change. Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Link: https://lore.kernel.org/r/20200904160004.87710-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02samples: mpssd: fix the build errors when enable DEBUG in mpssd.cSherry Sun
If enable DEBUG, will meet the following errors when build mpssd, so fix them here. Only one error is listed here, other errors are similar. mpssd.c: In function ‘virtio_net’: mpssd.c:615:21: error: incompatible type for argument 2 of ‘disp_iovec’ disp_iovec(mic, copy, __func__, __LINE__); ^~~~ mpssd.c:361:1: note: expected ‘struct mic_copy_desc *’ but argument is of type ‘struct mic_copy_desc’ disp_iovec(struct mic_info *mic, struct mic_copy_desc *copy, ^~~~~~~~~~ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20200925071831.8025-2-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02eeprom: ee1004: use module_i2c_driver to simplify the codeLiu Shixin
Use the module_i2c_driver() macro to make the code smaller and a bit simpler. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200918030225.3902750-1-liushixin2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02virt: vbox: simplify the return expression of vbg_input_open()Qinglang Miao
Simplify the return expression. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20200921131113.93459-1-miaoqinglang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02ocxl: simplify the return expression of free_function_dev()Qinglang Miao
Simplify the return expression. Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20200921131047.92526-1-miaoqinglang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02ocxl: fix kconfig dependency warning for OCXLNecip Fazil Yildiran
When OCXL is enabled and HOTPLUG_PCI is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for HOTPLUG_PCI_POWERNV Depends on [n]: PCI [=y] && HOTPLUG_PCI [=n] && PPC_POWERNV [=y] && EEH [=y] Selected by [y]: - OCXL [=y] && PPC_POWERNV [=y] && PCI [=y] && EEH [=y] The reason is that OCXL selects HOTPLUG_PCI_POWERNV without depending on or selecting HOTPLUG_PCI while HOTPLUG_PCI_POWERNV is subordinate to HOTPLUG_PCI. HOTPLUG_PCI_POWERNV is a visible symbol with a set of dependencies. Selecting it will lead to overlooking its other dependencies as well. Let OCXL depend on HOTPLUG_PCI_POWERNV instead to avoid Kbuild issues. Fixes: 49ce94b8677c ("ocxl: Add PCI hotplug dependency to Kconfig") Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Link: https://lore.kernel.org/r/20200918094148.20525-1-fazilyildiran@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02x86/dumpstack: Fix misleading instruction pointer error messageMark Mossberg
Printing "Bad RIP value" if copy_code() fails can be misleading for userspace pointers, since copy_code() can fail if the instruction pointer is valid but the code is paged out. This is because copy_code() calls copy_from_user_nmi() for userspace pointers, which disables page fault handling. This is reproducible in OOM situations, where it's plausible that the code may be reclaimed in the time between entry into the kernel and when this message is printed. This leaves a misleading log in dmesg that suggests instruction pointer corruption has occurred, which may alarm users. Change the message to state the error condition more precisely. [ bp: Massage a bit. ] Signed-off-by: Mark Mossberg <mark.mossberg@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201002042915.403558-1-mark.mossberg@gmail.com
2020-10-02bus: mhi: debugfs: Print channel context read-pointerLoic Poulain
This value was missing in the channel debugfs output. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-20-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Fix the building of MHI moduleManivannan Sadhasivam
The Kbuild rule to build MHI should use the append operator. This fixes the below warning reported by Kbuild test bot. WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/main.o WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/pm.o WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/boot.o Fixes: 0cbf260820fa ("bus: mhi: core: Add support for registering MHI controllers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-19-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: Remove unused nr_irqs_req variableLoic Poulain
nr_irqs_req is unused in MHI stack. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-18-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Allow shared IRQ for event ringsLoic Poulain
There is no requirement for using a dedicated IRQ per event ring. Some systems does not support multiple MSI vectors (e.g. intel without CONFIG_IRQ_REMAP), In that case the MHI controller can configure all the event rings to use the same interrupt (as fallback). Allow this by removing the nr_irqs = ev_ring test and add extra check in the irq_setup function. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-17-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce sysfs entries for MHIBhaumik Bhatt
Introduce sysfs entries to enable userspace clients the ability to read the serial number and the OEM PK Hash values obtained from BHI. OEMs need to read these device-specific hardware information values through userspace for factory testing purposes and cannot be exposed via degbufs as it may remain disabled for performance reasons. Also, update the documentation for ABI to include these entries. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: used dev_groups to manage sysfs attributes] Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-16-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce debugfs entries for MHIBhaumik Bhatt
Introduce debugfs entries to show state, register, channel, device, and event rings information. Allow the host to dump registers, issue device wake, and change the MHI timeout to help in debug. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-15-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: Fix entries based on Kconfig coding styleBhaumik Bhatt
Kconfig coding style mandates use of tabs for the configuration definition and an additional two spaces for the help text. Make the required changes to the MHI Kconfig adhering to those guidelines. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-14-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: Remove include of rwlock_types.hClark Williams
rwlock.h should not be included directly. Instead linux/splinlock.h should be included. Including it directly will break the RT build. Also there is no point in including _types.h headers directly. There is no benefit in including the type without the accessor. Fixes: 0cbf260820fa7 ("bus: mhi: core: Add support for registering MHI controllers") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Clark Williams <williams@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-13-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Add const qualifier to MHI config informationHemant Kumar
MHI channel, event and controller config data needs to be treated read only information. Add const qualifier to make sure config information passed by MHI controller is not modified by MHI core driver. Suggested-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-12-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce APIs to allocate and free the MHI controllerBhaumik Bhatt
Client devices should use the APIs provided to allocate and free the MHI controller structure. This will help ensure that the structure is zero-initialized and there are no false positives with respect to reading any values such as the serial number or the OEM PK hash. Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-11-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Read and save device hardware information from BHIBhaumik Bhatt
Device hardware specific information such as serial number and the OEM PK hash can be read using BHI and saved on host to identify the endpoint. Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-10-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce counters to track MHI device state transitionsBhaumik Bhatt
Use counters to track MHI device state transitions such as those to M0, M2, or M3 states. This can help in better debug, allowing the user to see the number of transitions to a certain MHI state when queried using debugfs entries or via other mechanisms. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-9-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce helper function to check device stateBhaumik Bhatt
Introduce a helper function to determine whether the device is in a powered ON state and resides in one of the active MHI states. This will allow for some use cases where access can be pre-determined. Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-8-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Use generic name field for an MHI deviceBhaumik Bhatt
An MHI device is not necessarily associated with only channels as we can have one associated with the controller itself. Hence, the chan_name field within the mhi_device structure should instead be replaced with a generic name to accurately reflect any type of MHI device. Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-7-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Trigger host resume if suspended during mhi_device_get()Bhaumik Bhatt
It is possible that the host may be suspending or suspended and may not allow an outgoing device wake assert immediately if a client has requested for it. Ensure that the host wakes up and allows for it so the client does not have to wait for an external trigger or an outgoing packet to be queued for the host resume to occur. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Use helper API to trigger a non-blocking host resumeBhaumik Bhatt
Autonomous low power mode support requires the MHI host to resume from multiple places and post a wakeup source to exit system suspend. This needs to be done in a non-blocking manner. Introduce a helper API to trigger the host resume for data transfers and other non-blocking use cases while supporting implementation of autonomous low power modes. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Abort suspends due to outgoing pending packetsBhaumik Bhatt
Add the missing check to abort suspends if a client driver has pending outgoing packets to send to the device. This allows better utilization of the MHI bus wherein clients on the host are not left waiting for longer suspend or resume cycles to finish for data transfers. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Remove double occurrence for mhi_ctrl_ev_task() declarationBhaumik Bhatt
mhi_ctrl_ev_task() in the internal header file occurred twice. Remove one of the occurrences for clean-up. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: fix doubled words and struct image_info kernel-docRandy Dunlap
Drop doubled word "table" in kernel-doc. Fix syntax for the kernel-doc notation for struct image_info. Note that the bhi_vec field is private and not part of the kernel-doc. Drop doubled word "device" in a comment. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: Added bus: prefix to the commit subject] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02scripts/spdxcheck.py: handle license identifiers in XML commentsLukas Bulwahn
Commit cc9539e7884c ("media: docs: use the new SPDX header for GFDL-1.1 on *.svg files") adds SPDX-License-Identifiers enclosed in XML comments, i.e., <!-- ... -->, for svg files. Unfortunately, ./scripts/spdxcheck.py does not handle SPDX-License-Identifiers in XML comments, so it simply fails on checking these files with 'Invalid License ID: --'. Strip the XML comment ending simply by copying how it was done for comments in C. With that, ./scripts/spdxcheck.py handles the svg files properly. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().Oliver Neukum
syzbot is reporting hung task at wdm_flush() [1], for there is a circular dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget cannot be called unless close() for /dev/cdc-wdm0 completes. Tetsuo Handa considered that such circular dependency is an usage error [2] which corresponds to an unresponding broken hardware [3]. But Alan Stern responded that we should be prepared for such hardware [4]. Therefore, this patch changes wdm_flush() to use wait_event_interruptible_timeout() which gives up after 30 seconds, for hardware that remains silent must be ignored. The 30 seconds are coming out of thin air. Changing wait_event() to wait_event_interruptible_timeout() makes error reporting from close() syscall less reliable. To compensate it, this patch also implements wdm_fsync() which does not use timeout. Those who want to be very sure that data has gone out to the device are now advised to call fsync(), with a caveat that fsync() can return -EINVAL when running on older kernels which do not implement wdm_fsync(). This patch also fixes three more problems (listed below) found during exhaustive discussion and testing. Since multiple threads can concurrently call wdm_write()/wdm_flush(), we need to use wake_up_all() whenever clearing WDM_IN_USE in order to make sure that all waiters are woken up. Also, error reporting needs to use fetch-and-clear approach in order not to report same error for multiple times. Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well check WDM_DISCONNECTING. In wdm_flush(), since locks are not held, it is not safe to dereference desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus, remove dev_err() from wdm_flush(). [1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186 [2] https://lkml.kernel.org/r/27b7545e-8f41-10b8-7c02-e35a08eb1611@i-love.sakura.ne.jp [3] https://lkml.kernel.org/r/79ba410f-e0ef-2465-b94f-6b9a4a82adf5@i-love.sakura.ne.jp [4] https://lkml.kernel.org/r/20200530011040.GB12419@rowland.harvard.edu [5] https://lkml.kernel.org/r/c85331fc-874c-6e46-a77f-0ef1dc075308@i-love.sakura.ne.jp Reported-by: syzbot <syzbot+854768b99f19e89d7f81@syzkaller.appspotmail.com> Cc: stable <stable@vger.kernel.org> Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200928141755.3476-1-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02net: pegasus: Use the new usb control message API.Petko Manolov
The old usb_control_msg() let the caller handle the error and also did not account for partial reads. Since these are now considered harmful, move the driver over to usb_control_msg_recv/send() calls. Added small note about why set_registers() can't be used to substitute set_register(). Signed-off-by: Petko Manolov <petko.manolov@konsulko.com> Acked-by: David S. Miller <davem@davemloft.net> Link: https://lore.kernel.org/r/20200927124909.16380-2-petko.manolov@konsulko.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-10-03 12:10:02 +0000