summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-08HID: logitech-dj: add the G602 receiverFilipe Laíns
Tested. The device gets correctly exported to userspace and I can see mouse and keyboard events. Signed-off-by: Filipe Laíns <lains@archlinux.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-08ASoC: hdmi-codec: Fix return value in hdmi_codec_set_jack()Stephan Gerhold
Sound is broken on the DragonBoard 410c (apq8016_sbc) since 5.10: hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_component_set_jack on hdmi-audio-codec.1.auto: -95 qcom-apq8016-sbc 7702000.sound: Failed to set jack: -95 ADV7533: ASoC: error at snd_soc_link_init on ADV7533: -95 hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_component_set_jack on hdmi-audio-codec.1.auto: -95 qcom-apq8016-sbc: probe of 7702000.sound failed with error -95 This happens because apq8016_sbc calls snd_soc_component_set_jack() on all codec DAIs and attempts to ignore failures with return code -ENOTSUPP. -ENOTSUPP is also excluded from error logging in soc_component_ret(). However, hdmi_codec_set_jack() returns -E*OP*NOTSUPP if jack detection is not supported, which is not handled in apq8016_sbc and soc_component_ret(). Make it return -ENOTSUPP instead to fix sound and silence the errors. Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: 55c5cc63ab32 ("ASoC: hdmi-codec: Use set_jack ops to set jack") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20210107165131.2535-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-08KVM: x86: __kvm_vcpu_halt can be staticPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-08Merge tag 'kvmarm-fixes-5.11-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.11, take #1 - VM init cleanups - PSCI relay cleanups - Kill CONFIG_KVM_ARM_PMU - Fixup __init annotations - Fixup reg_to_encoding() - Fix spurious PMCR_EL0 access
2021-01-08Merge tag 'drm-misc-fixes-2021-01-08' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * dma-buf: fix a use-after-free * radeon: don't init the TTM page pool manually * ttm: unexport ttm_pool_{init,fini}() Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/X/gnKs52t8xUuAlE@linux-uq9g
2021-01-08Merge tag 'drm-msm-fixes-2021-01-07' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/msm into drm-fixes A few misc fixes from Rob, mostly fallout from the locking rework that landed in the merge window, plus a few smaller things. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtWMhzyD6kejmViZeZ+zfJxRvfq-R2t_zA+DcDiTxsYRQ@mail.gmail.com
2021-01-08x86/resctrl: Don't move a task to the same resource groupFenghua Yu
Shakeel Butt reported in [1] that a user can request a task to be moved to a resource group even if the task is already in the group. It just wastes time to do the move operation which could be costly to send IPI to a different CPU. Add a sanity check to ensure that the move operation only happens when the task is not already in the resource group. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.1608243147.git.reinette.chatre@intel.com
2021-01-08x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSRFenghua Yu
Currently, when moving a task to a resource group the PQR_ASSOC MSR is updated with the new closid and rmid in an added task callback. If the task is running, the work is run as soon as possible. If the task is not running, the work is executed later in the kernel exit path when the kernel returns to the task again. Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task is running is the right thing to do. Queueing work for a task that is not running is unnecessary (the PQR_ASSOC MSR is already updated when the task is scheduled in) and causing system resource waste with the way in which it is implemented: Work to update the PQR_ASSOC register is queued every time the user writes a task id to the "tasks" file, even if the task already belongs to the resource group. This could result in multiple pending work items associated with a single task even if they are all identical and even though only a single update with most recent values is needed. Specifically, even if a task is moved between different resource groups while it is sleeping then it is only the last move that is relevant but yet a work item is queued during each move. This unnecessary queueing of work items could result in significant system resource waste, especially on tasks sleeping for a long time. For example, as demonstrated by Shakeel Butt in [1] writing the same task id to the "tasks" file can quickly consume significant memory. The same problem (wasted system resources) occurs when moving a task between different resource groups. As pointed out by Valentin Schneider in [2] there is an additional issue with the way in which the queueing of work is done in that the task_struct update is currently done after the work is queued, resulting in a race with the register update possibly done before the data needed by the update is available. To solve these issues, update the PQR_ASSOC MSR in a synchronous way right after the new closid and rmid are ready during the task movement, only if the task is running. If a moved task is not running nothing is done since the PQR_ASSOC MSR will be updated next time the task is scheduled. This is the same way used to update the register when tasks are moved as part of resource group removal. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ [2] https://lore.kernel.org/lkml/20201123022433.17905-1-valentin.schneider@arm.com [ bp: Massage commit message and drop the two update_task_closid_rmid() variants. ] Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <shakeelb@google.com> Reported-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: James Morse <james.morse@arm.com> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/17aa2fb38fc12ce7bb710106b3e7c7b45acb9e94.1608243147.git.reinette.chatre@intel.com
2021-01-08crypto: omap-sham - Fix link error without crypto-engineArnd Bergmann
The driver was converted to use the crypto engine helper but is missing the corresponding Kconfig statement to ensure it is available: arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_probe': omap-sham.c:(.text+0x374): undefined reference to `crypto_engine_alloc_init' arm-linux-gnueabi-ld: omap-sham.c:(.text+0x384): undefined reference to `crypto_engine_start' arm-linux-gnueabi-ld: omap-sham.c:(.text+0x510): undefined reference to `crypto_engine_exit' arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_finish_req': omap-sham.c:(.text+0x98c): undefined reference to `crypto_finalize_hash_request' arm-linux-gnueabi-ld: omap-sham.c:(.text+0x9a0): undefined reference to `crypto_transfer_hash_request_to_engine' arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_update': omap-sham.c:(.text+0xf24): undefined reference to `crypto_transfer_hash_request_to_engine' arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_final': omap-sham.c:(.text+0x1020): undefined reference to `crypto_transfer_hash_request_to_engine' Fixes: 133c3d434d91 ("crypto: omap-sham - convert to use crypto engine") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-08crypto: xor - Fix divide error in do_xor_speed()Kirill Tkhai
crypto: Fix divide error in do_xor_speed() From: Kirill Tkhai <ktkhai@virtuozzo.com> Latest (but not only latest) linux-next panics with divide error on my QEMU setup. The patch at the bottom of this message fixes the problem. xor: measuring software checksum speed divide error: 0000 [#1] PREEMPT SMP KASAN PREEMPT SMP KASAN CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.10.0-next-20201223+ #2177 RIP: 0010:do_xor_speed+0xbb/0xf3 Code: 41 ff cc 75 b5 bf 01 00 00 00 e8 3d 23 8b fe 65 8b 05 f6 49 83 7d 85 c0 75 05 e8 84 70 81 fe b8 00 00 50 c3 31 d2 48 8d 7b 10 <f7> f5 41 89 c4 e8 58 07 a2 fe 44 89 63 10 48 8d 7b 08 e8 cb 07 a2 RSP: 0000:ffff888100137dc8 EFLAGS: 00010246 RAX: 00000000c3500000 RBX: ffffffff823f0160 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000808 RDI: ffffffff823f0170 RBP: 0000000000000000 R08: ffffffff8109c50f R09: ffffffff824bb6f7 R10: fffffbfff04976de R11: 0000000000000001 R12: 0000000000000000 R13: ffff888101997000 R14: ffff888101994000 R15: ffffffff823f0178 FS: 0000000000000000(0000) GS:ffff8881f7780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000000220e000 CR4: 00000000000006a0 Call Trace: calibrate_xor_blocks+0x13c/0x1c4 ? do_xor_speed+0xf3/0xf3 do_one_initcall+0xc1/0x1b7 ? start_kernel+0x373/0x373 ? unpoison_range+0x3a/0x60 kernel_init_freeable+0x1dd/0x238 ? rest_init+0xc6/0xc6 kernel_init+0x8/0x10a ret_from_fork+0x1f/0x30 ---[ end trace 5bd3c1d0b77772da ]--- Fixes: c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking") Cc: <stable@vger.kernel.org> Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-07block: pre-initialize struct block_device in bdev_alloc_inodeChristoph Hellwig
bdev_evict_inode and bdev_free_inode are also called for the root inode of bdevfs, for which bdev_alloc is never called. Move the zeroing o f struct block_device and the initialization of the bd_bdi field into bdev_alloc_inode to make sure they are initialized for the root inode as well. Fixes: e6cb53827ed6 ("block: initialize struct block_device in bdev_alloc") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-07scsi: ufs: Fix tm request when non-fatal error happensJaegeuk Kim
When non-fatal error like line-reset happens, ufshcd_err_handler() starts to abort tasks by ufshcd_try_to_abort_task(). When it tries to issue a task management request, we hit two warnings: WARNING: CPU: 7 PID: 7 at block/blk-core.c:630 blk_get_request+0x68/0x70 WARNING: CPU: 4 PID: 157 at block/blk-mq-tag.c:82 blk_mq_get_tag+0x438/0x46c After fixing the above warnings we hit another tm_cmd timeout which may be caused by unstable controller state: __ufshcd_issue_tm_cmd: task management cmd 0x80 timed-out Then, ufshcd_err_handler() enters full reset, and kernel gets stuck. It turned out ufshcd_print_trs() printed too many messages on console which requires CPU locks. Likewise hba->silence_err_logs, we need to avoid too verbose messages. This is actually not an error case. Link: https://lore.kernel.org/r/20210107185316.788815-3-jaegeuk@kernel.org Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs") Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-07scsi: ufs: Fix livelock of ufshcd_clear_ua_wluns()Jaegeuk Kim
When gate_work/ungate_work experience an error during hibern8_enter or exit we can livelock: ufshcd_err_handler() ufshcd_scsi_block_requests() ufshcd_reset_and_restore() ufshcd_clear_ua_wluns() -> stuck ufshcd_scsi_unblock_requests() In order to avoid this, ufshcd_clear_ua_wluns() can be called per recovery flows such as suspend/resume, link_recovery, and error_handler. Link: https://lore.kernel.org/r/20210107185316.788815-2-jaegeuk@kernel.org Fixes: 1918651f2d7e ("scsi: ufs: Clear UAC for RPMB after ufshcd resets") Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-07scsi: ibmvfc: Fix missing cast of ibmvfc_event pointer to u64 handleTyrel Datwyler
Commit 2aa0102c6688 ("scsi: ibmvfc: Use correlation token to tag commands") sets the vfcFrame correlation token to the pointer handle of the associated ibmvfc_event. However, that commit failed to cast the pointer to an appropriate type which in this case is a u64. As such sparse warnings are generated for both correlation token assignments. ibmvfc.c:2375:36: sparse: incorrect type in argument 1 (different base types) ibmvfc.c:2375:36: sparse: expected unsigned long long [usertype] val ibmvfc.c:2375:36: sparse: got struct ibmvfc_event *[assigned] evt Add the appropriate u64 casts when assigning an ibmvfc_event as a correlation token. Link: https://lore.kernel.org/r/20210106203721.1054693-1-tyreld@linux.ibm.com Fixes: 2aa0102c6688 ("scsi: ibmvfc: Use correlation token to tag commands") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-07scsi: ufs: ufshcd-pltfrm depends on HAS_IOMEMRandy Dunlap
Building ufshcd-pltfrm.c on arch/s390/ has a linker error since S390 does not support IOMEM, so add a dependency on HAS_IOMEM. s390-linux-ld: drivers/scsi/ufs/ufshcd-pltfrm.o: in function `ufshcd_pltfrm_init': ufshcd-pltfrm.c:(.text+0x38e): undefined reference to `devm_platform_ioremap_resource' where that devm_ function is inside an #ifdef CONFIG_HAS_IOMEM/#endif block. Link: lore.kernel.org/r/202101031125.ZEFCUiKi-lkp@intel.com Link: https://lore.kernel.org/r/20210106040822.933-1-rdunlap@infradead.org Fixes: 03b1781aa978 ("[SCSI] ufs: Add Platform glue driver for ufshcd") Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: linux-scsi@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-07scsi: megaraid_sas: Fix MEGASAS_IOC_FIRMWARE regressionArnd Bergmann
Phil Oester reported that a fix for a possible buffer overrun that I sent caused a regression that manifests in this output: Event Message: A PCI parity error was detected on a component at bus 0 device 5 function 0. Severity: Critical Message ID: PCI1308 The original code tried to handle the sense data pointer differently when using 32-bit 64-bit DMA addressing, which would lead to a 32-bit dma_addr_t value of 0x11223344 to get stored 32-bit kernel: 44 33 22 11 ?? ?? ?? ?? 64-bit LE kernel: 44 33 22 11 00 00 00 00 64-bit BE kernel: 00 00 00 00 44 33 22 11 or a 64-bit dma_addr_t value of 0x1122334455667788 to get stored as 32-bit kernel: 88 77 66 55 ?? ?? ?? ?? 64-bit kernel: 88 77 66 55 44 33 22 11 In my patch, I tried to ensure that the same value is used on both 32-bit and 64-bit kernels, and picked what seemed to be the most sensible combination, storing 32-bit addresses in the first four bytes (as 32-bit kernels already did), and 64-bit addresses in eight consecutive bytes (as 64-bit kernels already did), but evidently this was incorrect. Always storing the dma_addr_t pointer as 64-bit little-endian, i.e. initializing the second four bytes to zero in case of 32-bit addressing, apparently solved the problem for Phil, and is consistent with what all 64-bit little-endian machines did before. I also checked in the history that in previous versions of the code, the pointer was always in the first four bytes without padding, and that previous attempts to fix 64-bit user space, big-endian architectures and 64-bit DMA were clearly flawed and seem to have introduced made this worse. Link: https://lore.kernel.org/r/20210104234137.438275-1-arnd@kernel.org Fixes: 381d34e376e3 ("scsi: megaraid_sas: Check user-provided offsets") Fixes: 107a60dd71b5 ("scsi: megaraid_sas: Add support for 64bit consistent DMA") Fixes: 94cd65ddf4d7 ("[SCSI] megaraid_sas: addded support for big endian architecture") Fixes: 7b2519afa1ab ("[SCSI] megaraid_sas: fix 64 bit sense pointer truncation") Reported-by: Phil Oester <kernel@linuxace.com> Tested-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-07scsi: docs: ABI: sysfs-driver-ufs: Add DeepSleep power modeAdrian Hunter
Update sysfs documentation for addition of DeepSleep power mode. Link: https://lore.kernel.org/r/20210104155026.16417-1-adrian.hunter@intel.com Fixes: fe1d4c2ebcae ("scsi: ufs: Add DeepSleep feature") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-07Merge tag 'mlx5-fixes-2021-01-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-01-07 * tag 'mlx5-fixes-2021-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups net/mlx5e: Fix two double free cases net/mlx5: Release devlink object if adev fails net/mlx5e: ethtool, Fix restriction of autoneg with 56G net/mlx5e: In skb build skip setting mark in switchdev mode net/mlx5: E-Switch, fix changing vf VLANID net/mlx5e: Fix SWP offsets when vlan inserted by driver net/mlx5e: CT: Use per flow counter when CT flow accounting is enabled net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address net/mlx5e: Add missing capability check for uplink follow net/mlx5: Check if lag is supported before creating one ==================== Link: https://lore.kernel.org/r/20210107202845.470205-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbEAleksander Jan Bajkowski
Exclude RMII from modes that report 1 GbE support. Reduced MII supports up to 100 MbE. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210107195818.3878-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge branch 's390-qeth-fixes-2021-01-07'Jakub Kicinski
Julian Wiedmann says: ==================== s390/qeth: fixes 2021-01-07 This brings two locking fixes for the device control path. Also one fix for a path where our .ndo_features_check() attempts to access a non-existent L2 header. ==================== Link: https://lore.kernel.org/r/20210107172442.1737-1-jwi@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix L2 header access in qeth_l3_osa_features_check()Julian Wiedmann
ip_finish_output_gso() may call .ndo_features_check() even before the skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt to inspect the L2 header via vlan_eth_hdr(). Switch to vlan_get_protocol(), as already used further down in the common qeth_features_check() path. Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix locking for discipline setup / removalJulian Wiedmann
Due to insufficient locking, qeth_core_set_online() and qeth_dev_layer2_store() can run in parallel, both attempting to load & setup the discipline (and stepping on each other toes along the way). A similar race can also occur between qeth_core_remove_device() and qeth_dev_layer2_store(). Access to .discipline is meant to be protected by the discipline_mutex, so add/expand the locking in qeth_core_remove_device() and qeth_core_set_online(). Adjust the locking in qeth_l*_remove_device() accordingly, as it's now handled by the callers in a consistent manner. Based on an initial patch by Ursula Braun. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix deadlock during recoveryJulian Wiedmann
When qeth_dev_layer2_store() - holding the discipline_mutex - waits inside qeth_l*_remove_device() for a qeth_do_reset() thread to complete, we can hit a deadlock if qeth_do_reset() concurrently calls qeth_set_online() and thus tries to aquire the discipline_mutex. Move the discipline_mutex locking outside of qeth_set_online() and qeth_set_offline(), and turn the discipline into a parameter so that callers understand the dependency. To fix the deadlock, we can now relax the locking: As already established, qeth_l*_remove_device() waits for qeth_do_reset() to complete. So qeth_do_reset() itself is under no risk of having card->discipline ripped out while it's running, and thus doesn't need to take the discipline_mutex. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge branch 'nexthop-various-fixes'Jakub Kicinski
Ido Schimmel says: ==================== nexthop: Various fixes This series contains various fixes for the nexthop code. The bugs were uncovered during the development of resilient nexthop groups. Patches #1-#2 fix the error path of nexthop_create_group(). I was not able to trigger these bugs with current code, but it is possible with the upcoming resilient nexthop groups code which adds a user controllable memory allocation further in the function. Patch #3 fixes wrong validation of netlink attributes. Patch #4 fixes wrong invocation of mausezahn in a selftest. ==================== Link: https://lore.kernel.org/r/20210107144824.1135691-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07selftests: fib_nexthops: Fix wrong mausezahn invocationIdo Schimmel
For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an error is returned: # ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn" Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address. Invalid command line parameters! Fixes: 7c741868ceab ("selftests: Add torture tests to nexthop tests") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Bounce NHA_GATEWAY in FDB nexthop groupsPetr Machata
The function nh_check_attr_group() is called to validate nexthop groups. The intention of that code seems to have been to bounce all attributes above NHA_GROUP_TYPE except for NHA_FDB. However instead it bounces all these attributes except when NHA_FDB attribute is present--then it accepts them. NHA_FDB validation that takes place before, in rtm_to_nh_config(), already bounces NHA_OIF, NHA_BLACKHOLE, NHA_ENCAP and NHA_ENCAP_TYPE. Yet further back, NHA_GROUPS and NHA_MASTER are bounced unconditionally. But that still leaves NHA_GATEWAY as an attribute that would be accepted in FDB nexthop groups (with no meaning), so long as it keeps the address family as unspecified: # ip nexthop add id 1 fdb via 127.0.0.1 # ip nexthop add id 10 fdb via default group 1 The nexthop code is still relatively new and likely not used very broadly, and the FDB bits are newer still. Even though there is a reproducer out there, it relies on an improbable gateway arguments "via default", "via all" or "via any". Given all this, I believe it is OK to reformulate the condition to do the right thing and bounce NHA_GATEWAY. Fixes: 38428d68719c ("nexthop: support for fdb ecmp nexthops") Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Unlink nexthop group entry in error pathIdo Schimmel
In case of error, remove the nexthop group entry from the list to which it was previously added. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07nexthop: Fix off-by-one error in error pathIdo Schimmel
A reference was not taken for the current nexthop entry, so do not try to put it in the error path. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07octeontx2-af: fix memory leak of lmac and lmac->nameColin Ian King
Currently the error return paths don't kfree lmac and lmac->name leading to some memory leaks. Fix this by adding two error return paths that kfree these objects Addresses-Coverity: ("Resource leak") Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07riscv: Enable interrupts during syscalls with M-ModeDamien Le Moal
When running is M-Mode (no MMU config), MPIE does not get set. This results in all syscalls being executed with interrupts disabled as handle_exception never sets SR_IE as it always sees SR_PIE being cleared. Fix this by always force enabling interrupts in handle_syscall when CONFIG_RISCV_M_MODE is enabled. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-07riscv: Fix sifive serial driverDamien Le Moal
Setup the port uartclk in sifive_serial_probe() so that the base baud rate is correctly printed during device probe instead of always showing "0". I.e. the probe message is changed from 38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1, base_baud = 0) is a SiFive UART v0 to the correct: 38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1, base_baud = 115200) is a SiFive UART v0 Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-07riscv: Fix kernel time_init()Damien Le Moal
If of_clk_init() is not called in time_init(), clock providers defined in the system device tree are not initialized, resulting in failures for other devices to initialize due to missing clocks. Similarly to other architectures and to the default kernel time_init() implementation, call of_clk_init() before executing timer_probe() in time_init(). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-07riscv: return -ENOSYS for syscall -1Andreas Schwab
Properly return -ENOSYS for syscall -1 instead of leaving the return value uninitialized. This fixes the strace teststuite. Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER") Cc: stable@vger.kernel.org Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Tycho Andersen <tycho@tycho.pizza> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-07Merge branch 'bug-fixes-for-chtls-driver'Jakub Kicinski
Ayush Sawal says: ==================== Bug fixes for chtls driver patch 1: Fix hardware tid leak. patch 2: Remove invalid set_tcb call. patch 3: Fix panic when route to peer not configured. patch 4: Avoid unnecessary freeing of oreq pointer. patch 5: Replace skb_dequeue with skb_peek. patch 6: Added a check to avoid NULL pointer dereference patch. patch 7: Fix chtls resources release sequence. ==================== Link: https://lore.kernel.org/r/20210106042912.23512-1-ayush.sawal@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix chtls resources release sequenceAyush Sawal
CPL_ABORT_RPL is sent after releasing the resources by calling chtls_release_resources(sk); and chtls_conn_done(sk); eventually causing kernel panic. Fixing it by calling release in appropriate order. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Added a check to avoid NULL pointer dereferenceAyush Sawal
In case of server removal lookup_stid() may return NULL pointer, which is used as listen_ctx. So added a check before accessing this pointer. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Replace skb_dequeue with skb_peekAyush Sawal
The skb is unlinked twice, one in __skb_dequeue in function chtls_reset_synq() and another in cleanup_syn_rcv_conn(). So in this patch using skb_peek() instead of __skb_dequeue(), so that unlink will be handled only in cleanup_syn_rcv_conn(). Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Avoid unnecessary freeing of oreq pointerAyush Sawal
In chtls_pass_accept_request(), removing the chtls_reqsk_free() call to avoid oreq freeing twice. Here oreq is the pointer to struct request_sock. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix panic when route to peer not configuredAyush Sawal
If route to peer is not configured, we might get non tls devices from dst_neigh_lookup() which is invalid, adding a check to avoid it. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Remove invalid set_tcb callAyush Sawal
At the time of SYN_RECV, connection information is not initialized at FW, updating tcb flag over uninitialized connection causes adapter crash. We don't need to update the flag during SYN_RECV state, so avoid this. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07chtls: Fix hardware tid leakAyush Sawal
send_abort_rpl() is not calculating cpl_abort_req_rss offset and ends up sending wrong TID with abort_rpl WR causng tid leaks. Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is redundant. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08MAINTAINERS: update Peter Chen's email addressPeter Chen
Using kernel.org as my email address. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2021-01-07Merge tag 'gcc-plugins-v5.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc-plugins fix from Kees Cook: "Bump c++ standard version for latest GCC versions (Valdis Kletnieks)" * tag 'gcc-plugins-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: fix gcc 11 indigestion with plugins...
2021-01-07KVM: SVM: Add support for booting APs in an SEV-ES guestTom Lendacky
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence, where the guest vCPU register state is updated and then the vCPU is VMRUN to begin execution of the AP. For an SEV-ES guest, this won't work because the guest register state is encrypted. Following the GHCB specification, the hypervisor must not alter the guest register state, so KVM must track an AP/vCPU boot. Should the guest want to park the AP, it must use the AP Reset Hold exit event in place of, for example, a HLT loop. First AP boot (first INIT-SIPI-SIPI sequence): Execute the AP (vCPU) as it was initialized and measured by the SEV-ES support. It is up to the guest to transfer control of the AP to the proper location. Subsequent AP boot: KVM will expect to receive an AP Reset Hold exit event indicating that the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to awaken it. When the AP Reset Hold exit event is received, KVM will place the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI sequence, KVM will make the vCPU runnable. It is again up to the guest to then transfer control of the AP to the proper location. To differentiate between an actual HLT and an AP Reset Hold, a new MP state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is placed in upon receiving the AP Reset Hold exit event. Additionally, to communicate the AP Reset Hold exit event up to userspace (if needed), a new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD. A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds a new function that, for non SEV-ES guests, invokes the original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests, implements the logic above. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexitMaxim Levitsky
It is possible to exit the nested guest mode, entered by svm_set_nested_state prior to first vm entry to it (e.g due to pending event) if the nested run was not pending during the migration. In this case we must not switch to the nested msr permission bitmap. Also add a warning to catch similar cases in the future. Fixes: a7d5c7ce41ac1 ("KVM: nSVM: delay MSR permission processing to first nested VM run") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210107093854.882483-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest modeMaxim Levitsky
We overwrite most of vmcb fields while doing so, so we must mark it as dirty. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210107093854.882483-5-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: nSVM: correctly restore nested_run_pending on migrationMaxim Levitsky
The code to store it on the migration exists, but no code was restoring it. One of the side effects of fixing this is that L1->L2 injected events are no longer lost when migration happens with nested run pending. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210107093854.882483-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Clarify TDP MMU page list invariantsBen Gardon
The tdp_mmu_roots and tdp_mmu_pages in struct kvm_arch should only contain pages with tdp_mmu_page set to true. tdp_mmu_pages should not contain any pages with a non-zero root_count and tdp_mmu_roots should only contain pages with a positive root_count, unless a thread holds the MMU lock and is in the process of modifying the list. Various functions expect these invariants to be maintained, but they are not explictily documented. Add to the comments on both fields to document the above invariants. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210107001935.3732070-2-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07KVM: x86/mmu: Ensure TDP MMU roots are freed after yieldBen Gardon
Many TDP MMU functions which need to perform some action on all TDP MMU roots hold a reference on that root so that they can safely drop the MMU lock in order to yield to other threads. However, when releasing the reference on the root, there is a bug: the root will not be freed even if its reference count (root_count) is reduced to 0. To simplify acquiring and releasing references on TDP MMU root pages, and to ensure that these roots are properly freed, move the get/put operations into another TDP MMU root iterator macro. Moving the get/put operations into an iterator macro also helps simplify control flow when a root does need to be freed. Note that using the list_for_each_entry_safe macro would not have been appropriate in this situation because it could keep a pointer to the next root across an MMU lock release + reacquire, during which time that root could be freed. Reported-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 063afacd8730 ("kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU") Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU") Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU") Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210107001935.3732070-1-bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07kvm: check tlbs_dirty directlyLai Jiangshan
In kvm_mmu_notifier_invalidate_range_start(), tlbs_dirty is used as: need_tlb_flush |= kvm->tlbs_dirty; with need_tlb_flush's type being int and tlbs_dirty's type being long. It means that tlbs_dirty is always used as int and the higher 32 bits is useless. We need to check tlbs_dirty in a correct way and this change checks it directly without propagating it to need_tlb_flush. Note: it's _extremely_ unlikely this neglecting of higher 32 bits can cause problems in practice. It would require encountering tlbs_dirty on a 4 billion count boundary, and KVM would need to be using shadow paging or be running a nested guest. Cc: stable@vger.kernel.org Fixes: a4ee1ca4a36e ("KVM: MMU: delay flush all tlbs on sync_page path") Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20201217154118.16497-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 22:49:25 +0000