summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-26ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driverAndreas Fenkart
- omap mmc driver supports multiplexing, omap_mmc_hs doesn't this leads to one of the major confusions in the omap_hsmmc driver - platform data should be read-only for the driver most callbacks are not set by the omap3 platform init code while still required. So they are set from the driver probe function, which is against the paradigm that platform-data should not be modified by the driver typical examples are card_detect, read_only callbacks un-bundling by searching for driver name \"omap_hsmmc in the arch/arm folder. omap_hsmmc_platform_data is not initialized directly, but from omap2_hsmmc_info, which is defined in a separate header file not touched by this patch hwmod includes platform headers to declare features of the platform. All the declared features are prefixed OMAP_HSMMC. There is no need to include platform header from hwmod other except for feature defines Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26ARM: OMAP2: MMC: include mmc-omap platform header directlyAndreas Fenkart
Only a few files really need that platform header. When later splitting omap_mmc_platform_data into omap_mmc and omap_mmc_hs, those files declaring an hs mmc platform data will have to change the platform include, which is a good sanity check. Also removing omap242x_init_mmc, which is not used anywhere, checked with grep. Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: atmel-mci: adopt pinctrl supportWenyou Yang
Amend the atmel mci pin controller to optionally take a pin control handle and set the state of the pins to: - "default" on boot, resume and before performing an transfer. - "sleep" on suspend(). This should make it possible to optimize energy usage for the pins both for the suspend/resume cycle. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: sdhci: Add HS400 support to SDHCI driverAdrian Hunter
MMC core already has support for HS400. Add HS400 support to SDHCI driver. The SDHC Standard specification does not define HS400 so consequently HS400 support is non-standard. However HS400 is not selected without the host controller setting the corresponding capability flags so host controllers not yet supporting HS400 will not be affected. To support that, a quirk SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 is introduced to enable the use of capabilities register reserved bit-63 to indicate HS400 support. Because HS400 is non-standard for SDHCI, it is possible that different vendors will do things in different ways. However HS200 support faced the same issue but currently there is only one solution. As such, no attempt has been made to provide for alternate HS400 solutions except for SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: sdhci: Clear also HS400 1.2V capability if 1.2V is not supportedAdrian Hunter
1.2V HS200 mode capability is cleared if there is not a voltage regulator that supports 1.2V. Do the same for 1.2V HS400 mode. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: sdhci: Fix vqmmc error settingAdrian Hunter
supply.vqmmc is used with the IS_ERR macro which means the value must be valid or an error code. NULL is neither, so replace with ERR_PTR(-EINVAL). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: sdhci: Remove unused SDHCI_CTRL_HS_SDR200Adrian Hunter
SDHCI_CTRL_HS_SDR200 is unused. Remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: dw_mmc: Add IDMAC 64-bit address mode supportPrabu Thangamuthu
Synopsys DW_MMC IP core supports Internal DMA Controller with 64-bit address mode from IP version 2.70a onwards. Updated the driver to support IDMAC 64-bit addressing mode. Signed-off-by: Prabu Thangamuthu <prabu.t@synopsys.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: sdhci-pci: enable sdhci doesn't support hs200 quirk for AMD sdhciVincent Wan
AMD SD controller supports the SDR104 mode, but caps2 can not be promoted to support hs200 for eMMC. Signed-off-by: Vincent Wan <vincent.wan@amd.com> Signed-off-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: sdhci-pci: enable the clear transfer mode register quirk for AMD sdhciVincent Wan
This patch is to enable the quirk for AMD sdhci requiring transfer mode register need to be cleared for commands without data Signed-off-by: Vincent Wan <vincent.wan@amd.com> Signed-off-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: sdhci: Add a quirk for AMD SDHC transfer mode register need to be ↵Vincent Wan
cleared for cmd without data SDHC controller in AMD chipsets require SDHC transfer mode register to be cleared for commands without data. The issue was uncovered during testing eMMC cards on KB/ML based platforms Signed-off-by: Vincent Wan <vincent.wan@amd.com> Signed-off-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Tested-by: Vikram B <vikram.b@amd.com> Tested-by: Raghavendra Swamy <raghavendra.swamy@amd.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26clocksource: armada-370-xp: Use the reference clock on A375 SoCEzequiel Garcia
The 25 MHz reference clock has better stability so its use is preferred over the core clock. This commit takes advantage of the already introduced Armada 375 devicetree compatible string and adds a new timer initialization. If available, the timer will use the reference clock (named as 'fixed'). Otherwise, it falls back to the previous behavior. Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-11-26watchdog: orion: Use the reference clock on Armada 375 SoCEzequiel Garcia
The 25 MHz reference clock has better stability so its use is prefered over the core clock. Change the Armada 375 clock initialization to use this reference clock. To ensure the driver is compatible with an old devicetree, also provide a fallback path which will silently return to the previous behavior. While here, add the clock specification to the binding documentation. Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-11-26clocksource: armada-370-xp: Add missing clock enableEzequiel Garcia
This commit makes sure the timer clock is prepared and enabled before retrieving its rate. Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-11-26of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlapIan Campbell
memblock_is_region_reserved() returns true in the case of a partial overlap, meaning that the current code fails to reserve the non-overlapping portion. This call was introduced as part of d1552ce449eb "of/fdt: move memreserve and dtb memory reservations into core" which went into v3.16. I observed this causing a Midway system with a buggy fdt (the header declares itself to be larger than it really is) failing to boot because the over-inflated size of the fdt was causing it to seem to run into the swapper_pg_dir region, meaning the DT wasn't reserved. The symptoms were failing to find an disks or network and failing to boot. However given the ambiguity of whether things like the initrd are covered by /memreserve/ and similar I think it is best to also register the region rather than just ignoring it. Since memblock_reserve() handles overlaps just fine lets just warn and carry on. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: stable@vger.kernel.org # v3.16+
2014-11-26drm/i915: Cancel vdd off work before suspendVille Syrjälä
Currently we just make sure vdd is off before suspending, but we don't cancel the vdd off work. The work wil not touch vdd if want_panel_vdd==false so in theory this is fine. In the past that was perfectly fine since the vdd off work didn't do anything when want_panel_vdd==false, so even if the work would have been run during system resume before i915 has resumed, nothing would happen. However since pps_lock() will now grab the power domain references before it can check want_panel_vdd, we may end up toggling the power wells on/off already before the driver has resumed. That is not really acceptable, so cancel the vdd off work when suspending the encoder. The problem appeared when pps_lock() was introduced in: commit 773538e86081d146e0020435d614f4b96996c1f9 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Thu Sep 4 14:54:56 2014 +0300 drm/i915: Reset power sequencer pipe tracking when disp2d is off Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-11-26arm64: Add FIX_HOLE to permanent fixed addressesLaura Abbott
Every other architecture with permanent fixed addresses has FIX_HOLE as the first entry. This seems to be designed as a debugging aid but there are a couple of side effects of not having FIX_HOLE: - If the first fixed address is 0, fix_to_virt -> virt_to_fix triggers a BUG_ON for the virtual address being equal to FIXADDR_TOP - fix_to_virt may return a value outside of FIXADDR_START and FIXADDR_TOP which may look like a bug to a developer. Match up with other architectures and make everything clearer by adding FIX_HOLE. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-26ufs: fix NULL dereference when no regulators are definedAkinobu Mita
If no voltage supply regulators are defined for the UFS devices (assumed they are always-on), ufshcd_config_vreg_load() can be called on suspend/resume paths with vreg == NULL as hba->vreg_info.vcc* equal to NULL, and it causes NULL pointer dereference. This fixes it by making ufshcd_config_vreg_{h,l}pm noop when no regulators are defined. Signed-off-by: Akinobu Mita <mita@fixstars.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-26ufs: ensure clk gating work is finished before module unloadingAkinobu Mita
When dynamic clk gating feature is enabled, delayed workqueue machanism is used in order to detect certain period of inactivity. But there is no guarantee that scheduled gating work is completed before module unloading. So it can cause kernel crash by accessing memory after it was freed. Fix it by cancelling clk gating and ungating works and ensure that its execution is finished before module unloading. Signed-off-by: Akinobu Mita <mita@fixstars.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-26of: Add NVIDIA Tegra memory controller bindingThierry Reding
The memory controller on NVIDIA Tegra exposes various knobs that can be used to tune the behaviour of the clients attached to it. In addition, the memory controller implements an SMMU (IOMMU) which can translate I/O virtual addresses to physical addresses for clients. This is useful for scatter-gather operation on devices that don't support it natively and for virtualization or process separation. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-26ARM: tegra: Move AHB Kconfig to drivers/ambaThierry Reding
This will allow the Kconfig option to be shared among 32-bit and 64-bit ARM. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-26amba: Add Kconfig fileThierry Reding
Rather than duplicate the ARM_AMBA Kconfig symbol in both 32-bit and 64-bit ARM architectures, move the common definition to drivers/amba where dependent drivers will be located. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-26clk: tegra: Implement memory-controller clockThierry Reding
The memory controller clock runs either at half or the same frequency as the EMC clock. Reviewed-By: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-26Merge branch 'core' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuThierry Reding
This branch contains a couple of changes that will conflict with the Tegra SMMU driver rewrite. Since the driver is largely rewritten the conflict resolution is non-trivial.
2014-11-26Merge branch 'irqchip/atmel' into irqchip/coreJason Cooper
2014-11-26irqchip: brcmstb-l2: Fix error handling of irq_of_parse_and_mapDmitry Torokhov
Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Kevin Cernekee <cernekee@gmail.com> Link: https://lkml.kernel.org/r/20141114221642.GA37468@dtor-ws Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_mapDmitry Torokhov
Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Kevin Cernekee <cernekee@gmail.com> Link: https://lkml.kernel.org/r/20141114221614.GA37395@dtor-ws Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26arm: mvebu: normalize pinctrl entries for Armada SoCsArnaud Ebalard
There are currently 2 differents naming conventions used between the existing Armada SoC DT files for pinctrl entries (*_pin(s): *-pin(s) and pmx_*: pmx-*) with a vast majority of files using the former: $ grep _pin arch/arm/boot/dts/armada-*.dts* | wc -l 155 $ grep pmx arch/arm/boot/dts/armada-*.dts* | wc -l 13 In fact, only some Armada XP files are using the second variant. This patch normalizes those files (mainly ge0/1 entries) to use the first variant. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/00114c3169e1d93259ff4150ed46ee36eae16b1e.1416670812.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26arm: mvebu: fix wrongly named DS414 pinctrl entriesArnaud Ebalard
While renaming pinctrl entries during reviews of Synology DS414 support series, I missed three entries, as reported by Ben. This patch fixes those. Reported-by: Ben Peddell <klightspeed@killerwolves.net> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/608e4fd6e06e9c5289a84b9c38e81b2456dbcd79.1416670812.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-25Merge branch 'for-3.18' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd bugfixes from Bruce Fields: "These fix one mishandling of the case when security labels are configured out, and two races in the 4.1 backchannel code" * 'for-3.18' of git://linux-nfs.org/~bfields/linux: nfsd: Fix slot wake up race in the nfsv4.1 callback code SUNRPC: Fix locking around callback channel reply receive nfsd: correctly define v4.2 support attributes
2014-11-25Merge git://git.kvack.org/~bcrl/aio-fixesLinus Torvalds
Pull aio fix from Ben LaHaise: "Dirty page accounting fix for aio" * git://git.kvack.org/~bcrl/aio-fixes: aio: fix uncorrent dirty pages accouting when truncating AIO ring buffer
2014-11-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "This series fix a nasty issue with radeon adapters on powerpc servers, it's all CC'ed stable and has the relevant maintainers ack's/reviews. Basically, some (radeon) adapters have issues with MSI addresses above 1T (only support 40-bits). We had powerpc specific quirk but it only listed a specific revision of an adapter that we shipped with our machines and didn't properly handle the audio function which some distros enable nowadays. So we made the quirk generic and fixed both the graphic and audio drivers properly to use it. Without that, ppc64 server machines will crash at boot with a radeon adapter. Note: This has been brewing for a while, it just needed a last respin which got delayed due to us moving ozlabs to a new location in town and other such things taking priority" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pci: Remove unused force_32bit_msi quirk powerpc/pseries: Honor the generic "no_64bit_msi" flag powerpc/powernv: Honor the generic "no_64bit_msi" flag sound/radeon: Move 64-bit MSI quirk from arch to driver gpu/radeon: Set flag to indicate broken 64-bit MSI PCI/MSI: Add device flag indicating that 64-bit MSIs don't work ALSA: hda - Limit 40bit DMA for AMD HDMI controllers
2014-11-25Merge tag 'hwmon-for-linus-v3.18-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull a hwmon fix from Guenter Roeck: "Fix hwmon registration problem in g762 driver" * tag 'hwmon-for-linus-v3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (g762) fix call to devm_hwmon_device_register_with_groups()
2014-11-25f2fs: fix to recover converted inline_dataJaegeuk Kim
If an inode has converted inline_data which was written to the disk, we should set its inode flag for further fsync so that this inline_data can be recovered from sudden power off. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-26ARM: orion: convert the irq_reg_{readl,writel} calls to the new APIGregory CLEMENT
The commit "genirq: Generic chip: Change irq_reg_{readl,writel} arguments" modified the API. In the same tome the arch/arm/plat-orion/gpio.c file received a fix with the use of the old API: "ARM: orion: Fix for certain sequence of request_irq can cause irq storm". This commit fixes the use of the API. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Olof Johansson <olof@lixom.net> Link: https://lkml.kernel.org/r/1416928752-24529-1-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26Merge tag 'tags/mvebu-fixes-3.18' into irqchip/coreJason Cooper
mvebu fixes for v3.18 - Armada XP - Generalize i2c quirk - orion - Fix irq storm caused by specific sequence of request_irq
2014-11-25Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
https://git.linaro.org/people/mike.turquette/linux Pull clock fixes from Mike Turquette: "The fixes for the clock framework are all regressions in drivers, plus a single fix in one of the basic clock templates. No fixes to the core this time around. As with most clock driver fixes these run the gamut from fixing a build warning to fixing wrecked memory timings, with a little USB tossed in for fun" * tag 'clk-fixes-for-linus' of https://git.linaro.org/people/mike.turquette/linux: clk: pxa: fix pxa27x CCCR bit usage clk-divider: Fix READ_ONLY when divider > 1 clk: qcom: Fix duplicate rbcpr clock name clk: at91: usb: fix at91sam9x5 recalc, round and set rate clk: at91: usb: fix at91rm9200 round and set rate
2014-11-25f2fs: make clean the page before writingJaegeuk Kim
If a page is set to be written to the disk, we can make clean the page. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-25f2fs: no more dirty_nat_entires when flushingChangman Lee
After flushing dirty nat entries, it has to be no more dirty nat entries. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-25f2fs: check dirty_nat_cnt before flushing nat entries in journalChangman Lee
It's meaningless to check dirty_nat_cnt after re-dirtying nat entries in journal. And although there are rooms for dirty nat entires if dirty_nat_cnt is zero, it's also meaningless to check __has_cursum_space. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-25nfs: Add DEALLOCATE supportAnna Schumaker
This patch adds support for using the NFS v4.2 operation DEALLOCATE to punch holes in a file. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-25nfs: Add ALLOCATE supportAnna Schumaker
This patch adds support for using the NFS v4.2 operation ALLOCATE to preallocate data in a file. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-25NFS: Clean up nfs4_init_callback()Chuck Lever
nfs4_init_callback() is never invoked for NFS versions other than 4. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25NFS: SETCLIENTID XDR buffer sizes are incorrectChuck Lever
Use the correct calculation of the maximum size of a clientaddr4 when encoding and decoding SETCLIENTID operations. clientaddr4 is defined in section 2.2.10 of RFC3530bis-31. The usage in encode_setclientid_maxsz is missing the 4-byte length in both strings, but is otherwise correct. decode_setclientid_maxsz simply asks for a page of receive buffer space, which is unnecessarily large (more than 4KB). Note that a SETCLIENTID reply is either clientid+verifier, or clientaddr4, depending on the returned NFS status. It doesn't hurt to allocate enough space for both. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25SUNRPC: serialize iostats updatesChuck Lever
Occasionally mountstats reports a negative retransmission rate. Ensure that two RPCs completing concurrently don't confuse the sums in the transport's op_metrics array. Since pNFS filelayout can invoke rpc_count_iostats() on another transport from xprt_release(), we can't rely on simply holding the transport_lock in xprt_release(). There's nothing for it but hard serialization. One spin lock per RPC operation should make this as painless as it can be. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25Revert "serial: of-serial: add PM suspend/resume support"Greg Kroah-Hartman
This reverts commit 2dea53bf57783f243c892e99c10c6921e956aa7e. Turns out to be broken :( Cc: Jingchang Lu <jingchang.lu@freescale.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25tg3: fix ring init when there are more TX than RX channelsThadeu Lima de Souza Cascardo
If TX channels are set to 4 and RX channels are set to less than 4, using ethtool -L, the driver will try to initialize more RX channels than it has allocated, causing an oops. This fix only initializes the RX ring if it has been allocated. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-25f2fs: fix deadlock during inline_data conversionJaegeuk Kim
A deadlock can be occurred: Thread 1] Thread 2] - f2fs_write_data_pages - f2fs_write_begin - lock_page(page #0) - grab_cache_page(page #X) - get_node_page(inode_page) - grab_cache_page(page #0) : to convert inline_data - f2fs_write_data_page - f2fs_write_inline_data - get_node_page(inode_page) In this case, trying to lock inode_page and page #0 causes deadlock. In order to avoid this, this patch adds a rule for this locking policy, which is that page #0 should be locked followed by inode_page lock. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-25f2fs: fix typos for the word "destroy" in jump labelsMarkus Elfring
Two jump labels were adjusted in the implementation of the create_node_manager_caches() function because these identifiers contained typos. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-11-25tcp: fix possible NULL dereference in tcp_vX_send_reset()Eric Dumazet
After commit ca777eff51f7 ("tcp: remove dst refcount false sharing for prequeue mode") we have to relax check against skb dst in tcp_v[46]_send_reset() if prequeue dropped the dst. If a socket is provided, a full lookup was done to find this socket, so the dst test can be skipped. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88191 Reported-by: Jaša Bartelj <jasa.bartelj@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Daniel Borkmann <dborkman@redhat.com> Fixes: ca777eff51f7 ("tcp: remove dst refcount false sharing for prequeue mode") Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-30 23:54:35 +0000