| Age | Commit message (Collapse) | Author |
|---|
|
In unsigned-md5 selftests ip_route_add() is not needed in
client_add_ip(): the route was pre-setup in __test_init() => link_init()
for subnet, rather than a specific ip-address.
Currently, __ip_route_add() mistakenly always sets VRF table
to RT_TABLE_MAIN - this seems to have sneaked in during unsigned-md5
tests debugging. That also explains, why ip_route_add_vrf() ignored
EEXIST, returned by fib6.
Yet, keep EEXIST ignoring in bench-lookups selftests as it's expected
that those selftests may add the same (duplicate) routes.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. Setting the option is handled in
sk_setsockopt(), querying it was not handled in sk_getsockopt(), though.
Following remarks on an earlier submission of this patch, keep the old
behavior of getsockopt(SO_TIMESTAMPING_OLD) which returns the active
flags even if they actually have been set through SO_TIMESTAMPING_NEW.
The new getsockopt(SO_TIMESTAMPING_NEW) is stricter, returning flags
only if they have been set through the same option.
Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/lkml/20230703175048.151683-1-jthinz@mailbox.tu-berlin.de/
Link: https://lore.kernel.org/netdev/0d7cddc9-03fa-43db-a579-14f3e822615b@app.fastmail.com/
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This way GPIO will be denied on pins already claimed by other devices
and basic pin configuration (pull-up, pull-down etc.) can be done
through the userspace GPIO API.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The third "new features" pull request for v6.8. This is a smaller one
to clear up our tree before the break and nothing really noteworthy
this time.
Major changes:
stack
* cfg80211: introduce cfg80211_ssid_eq() for SSID matching
* cfg80211: support P2P operation on DFS channels
* mac80211: allow 64-bit radiotap timestamps
iwlwifi
* AX210: allow concurrent P2P operation on DFS channels
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal
Merge thermal control material for 6.8-rc1 from Daniel Lezcano:
"- Converted Mediatek Thermal to the json-schema (Rafał Miłecki)
- Fixed DT bindings issue on Loongson (Binbin Zhou)
- Fixed returning NULL instead of -ENODEV on Loogsoo (Binbin Zhou)
- Added the DT binding for the tsens on SM8650 platform (Neil Armstrong)
- Added a reboot on critical option feature (Fabio Estevam)
- Made usage of DEFINE_SIMPLE_DEV_PM_OPS on AmLogic (Uwe Kleine-König)
- Added the D1/T113s THS controller support on Sun8i (Maxim Kiselev)
- Fixed example in the DT binding for QCom SPMI (Johan Hovold)
- Fixed compilation warning for the tmon utility (Florian Eckert)
- Added interrupt based configuration on Exynos along with a set of
related cleanups (Mateusz Majewski)"
* tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
thermal/thermal_of: Allow rebooting after critical temp
reboot: Introduce thermal_zone_device_critical_reboot()
thermal/core: Prepare for introduction of thermal reboot
dt-bindings: thermal-zones: Document critical-action
...
|
|
Jamal Hadi Salim says:
====================
net/sched: retire tc ipt action
In keeping up with my status as a hero who removes code: another one bites the
dust.
The tc ipt action was intended to run all netfilter/iptables target.
Unfortunately it has not benefitted over the years from proper updates when
netfilter changes, and for that reason it has remained rudimentary.
Pinging a bunch of people that i was aware were using this indicates that
removing it wont affect them.
Retire it to reduce maintenance efforts.
So Long, ipt, and Thanks for all the Fish.
====================
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we are retiring the IPT action.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tc ipt action was intended to run all netfilter/iptables target.
Unfortunately it has not benefitted over the years from proper updates when
netfilter changes, and for that reason it has remained rudimentary.
Pinging a bunch of people that i was aware were using this indicates that
removing it wont affect them.
Retire it to reduce maintenance efforts. Buh-bye.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The latest platforms use a different SMU message port(0x938) from the one
currently being used (0x538). Make code changes to adapt to this new
information.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
AMD newer platforms, (AMDI000A or family 1Ah series) also supports the STB
functionality. Add this to amd_pmc_is_stb_supported().
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Idlemask is an indication of each IP block current state (i.e. whether it
is running or idle) during s2idle transistion. The newer 1Ah family
supports this feature, add it to the support list.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In the current code, amd_pmc_get_ip_info() is being called from
amd_pmc_s2d_init() and that code block gets enabled only when the STB is
being enabled.
But the information from amd_pmc_get_ip_info() will be required outside of
STB usecase. Hence move this call into driver probe sequence.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Latest AMD SoCs has VPE (Video Processing Engine) IP block and the
statistics related to this IP can be obtained as a part of metrics table
information that the PMFW propogates. Add this support for 1Ah family
series.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To initiate the HW deep state transistion the OS_HINT command has to be
sent the PMFW. Add this support to the platforms that has AMDI000A
support.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
dev->gso_partial_features is read from tx fast path for GSO packets.
Move it to appropriate section to avoid a cache line miss.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to have an intermediate functions as DEFINE_RES_*()
macros are represented by compound literals. Just use them in place.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Return a status code without storing it in an intermediate variable.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/0d0c4876-37d7-4bee-912e-56324495454f@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
apmf_sbios_heartbeat_notify()
The kfree() function was called in one case by
the apmf_sbios_heartbeat_notify() function during error handling
even if the passed variable contained a null pointer.
This issue was detected by using the Coccinelle software.
* Thus return directly after a call of the function “apmf_if_call” failed
at the beginning.
* Delete the label “out” which became unnecessary with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/362ee824-fc53-4e19-9529-8b621657635b@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove the "private:" comment to prevent the kernel-doc warning:
include/linux/wmi.h:27: warning: Excess struct member 'setable' description in 'wmi_device'
Either a struct member is documented (via kernel-doc) or it's private,
but not both.
Fixes: b4cc979588ee ("platform/x86: wmi: Add kernel doc comments")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Armin Wolf <W_Armin@gmx.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231223194321.23084-1-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add missing extern for tgl_h_reg_map. Fixes sparse warning:
drivers/platform/x86/intel/pmc/tgl.c:213:26: warning: symbol 'tgl_h_reg_map' was not declared. Should it be static?
Fixes: 544f7b7f651c ("platform/x86/intel/pmc: Add regmap for Tiger Lake H PCH")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-9-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the GBE LTR ignore suspend time fix for Lunar Lake.
Fixes: 119652b855e6 ("platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-8-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the GBE LTR ignore suspend time fix for Arrow Lake.
Fixes: f34dcf397286 ("platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-7-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Merge the 'platform-drivers-x86-v6.7-6' fixes into pdx86/for-next
so that the "Intel PMC GBE LTR regression" fixes can also be
applied to the new Arrow Lake and Lunar Lake platform support
code in pdx86/for-next .
|
|
Correct all kernel-doc notation on pvr_device.h so that there are no
kernel-doc warnings remaining.
pvr_device.h:292: warning: Excess struct member 'active' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'idle' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'work' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'old_kccb_cmds_executed' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'kccb_stall_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'ccb' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_q' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_obj' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'slot_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'reserved_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'waiters' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'fence_ctx' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'id' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'seqno' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'active' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'idle' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'work' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'old_kccb_cmds_executed' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'kccb_stall_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'ccb' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_q' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_obj' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'slot_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'reserved_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'waiters' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'fence_ctx' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'id' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'seqno' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Frank Binns <frank.binns@imgtec.com>
Cc: Donald Robson <donald.robson@imgtec.com>
Cc: Matt Coster <matt.coster@imgtec.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231054910.31805-1-rdunlap@infradead.org
|
|
Update kernel-doc comments in <drm/drm_gpuvm.h> to correct all
kernel-doc warnings:
drm_gpuvm.h:148: warning: Excess struct member 'addr' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'offset' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'obj' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'entry' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member '__subtree_last' description in 'drm_gpuva'
drm_gpuvm.h:192: warning: No description found for return value of 'drm_gpuva_invalidated'
drm_gpuvm.h:331: warning: Excess struct member 'tree' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'local_list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'lock' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'local_list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'lock' description in 'drm_gpuvm'
drm_gpuvm.h:352: warning: No description found for return value of 'drm_gpuvm_get'
drm_gpuvm.h:545: warning: Excess struct member 'fn' description in 'drm_gpuvm_exec'
drm_gpuvm.h:545: warning: Excess struct member 'priv' description in 'drm_gpuvm_exec'
drm_gpuvm.h:597: warning: missing initial short description on line:
* drm_gpuvm_exec_resv_add_fence()
drm_gpuvm.h:616: warning: missing initial short description on line:
* drm_gpuvm_exec_validate()
drm_gpuvm.h:623: warning: No description found for return value of 'drm_gpuvm_exec_validate'
drm_gpuvm.h:698: warning: Excess struct member 'gpuva' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'entry' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'gem' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'evict' description in 'drm_gpuvm_bo'
drm_gpuvm.h:726: warning: No description found for return value of 'drm_gpuvm_bo_get'
drm_gpuvm.h:738: warning: missing initial short description on line:
* drm_gpuvm_bo_gem_evict()
drm_gpuvm.h:740: warning: missing initial short description on line:
* drm_gpuvm_bo_gem_evict()
drm_gpuvm.h:698: warning: Excess struct member 'evict' description in 'drm_gpuvm_bo'
drm_gpuvm.h:844: warning: Excess struct member 'addr' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'range' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'offset' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'obj' description in 'drm_gpuva_op_map'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231054856.31786-1-rdunlap@infradead.org
|
|
ILI2901 requires reset to pull down time greater than 10ms,
so the configuration post_power_delay_ms is 10, and the chipset
initial time is required to be greater than 100ms,
so the post_gpio_reset_on_delay_ms is set to 100.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Ilitek ili2901 touch screen chip same as Elan eKTH6915 controller
has a reset gpio. The difference is that they have different
post_power_delay_ms and post_gpio_reset_on_delay_ms.
Ilitek ili2901 also uses 3.3V power supply.
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The struct bus_type pointer in hid_bpf_ops just passes the pointer to
the driver core, and the driver core can handle, and expects, a constant
pointer, so also make the pointer constant in hid_bpf_ops.
Part of the process of moving all usages of struct bus_type to be
constant to move them all to read-only memory.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the ishtp_cl_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the hid_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This commit adds a hotkey to switch between "gamepad" mode (mouse and keyboard
disabled) and "desktop" mode (gamepad disabled) by holding down the options
button (mapped here as the start button). This mirrors the behavior of the
official Steam client.
This also adds and uses a function for generating haptic pulses, as Steam also
does when engaging this hotkey.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The second byte of the GET_STRING_ATTRIB report is a length, so we should set
the size of the buffer to be the size we're actually requesting, and only
reject the reply if the length out is nonsensical.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
SDL includes a list of settings (formerly called registers in this driver),
reports (formerly cmds), and various other identifiers that were provided by
Valve. This commit imports a significant chunk of that list as well as
replacing most of the guessed names and a handful of magic constants. It also
replaces bitmask definitions that used hex with the BIT macro.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The client_opened variable was used to track if the hidraw was opened by any
clients to silence keyboard/mouse events while opened. However, there was no
counting of how many clients were opened, so opening two at the same time and
then closing one would fool the driver into thinking it had no remaining opened
clients.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This cleans up the locking logic so that the spinlock is consistently used for
access to a small handful of struct variables, and the mutex is exclusively and
consistently used for ensuring that mutliple threads aren't trying to
send/receive reports at the same time. Previously, only some report
transactions were guarded by this mutex, potentially breaking atomicity. The
mutex has been renamed to reflect this usage.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Steam Deck has a setting that controls whether or not the watchdog is
enabled, so instead of using a heartbeat to keep the watchdog from triggering,
this commit changes the behavior to simply disable the watchdog instead.
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The original implementation of this driver incorrectly guessed the function of
this register. It's not only unnecessary to write to this register for lizard
mode but actually counter-productive since it overwrites whatever previous
value was intentionally set, for example by Steam.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
RK3036 fix for emmc init issue and stdout-path for the console
on rk3036 kylin.
* tag 'v6.8-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Remove rockchip,default-sample-phase from rk3036.dtsi
ARM: dts: rockchip: Add stdout-path for rk3036 kylin
Link: https://lore.kernel.org/r/15502825.JCcGWNJJiE@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
One new boards, the CoolPi CM5 SoM and 4B SBC. Basic node for the rk3588
display controller and a bunch of small improvements for different boards,
* tag 'v6.8-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits)
arm64: dts: rockchip: Fix led pinctrl of lubancat 1
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
arm64: dts: rockchip: support poweroff on the rock-5b
arm64: dts: rockchip: Support poweroff on Orange Pi 5
arm64: dts: rockchip: nanopc-t6 sdmmc beautification
arm64: dts: rockchip: Fix rk3588 USB power-domain clocks
arm64: dts: rockchip: configure eth pad driver strength for orangepi r1 plus lts
arm64: dts: rockchip: Support poweroff on NanoPC-T6
arm64: dts: rockchip: rk3308-rock-pi-s gpio-line-names cleanup
arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB
dt-bindings: arm: rockchip: Add Cool Pi CM5
arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
dt-bindings: arm: rockchip: Add Cool Pi 4B
dt-bindings: vendor-prefixes: Add Cool Pi
arm64: dts: rockchip: add gpio-line-names to rk3328-rock-pi-e
arm64: dts: rockchip: make use gpio-keys for buttons on puma-haikou
arm64: dts: rockchip: expose BIOS Disable feedback pin on rk3399-puma
arm64: dts: rockchip: fix misleading comment in rk3399-puma-haikou.dts
arm64: dts: rockchip: Add vop on rk3588
...
Link: https://lore.kernel.org/r/3711719.VqM8IeB0Os@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Qualcomm Arm64 DeviceTree updates for v6.8
This corrects the rate of the UTMI clock on IPQ6018 USB0. The SDHCI
controller on SC7280 gains missing markings for being cache-coherent.
For SC8180X a typo in assignment of PCIe refgen clocks is corrected, PCI
controllers are marked cache-coherent, and the USB SS PHY interrupts are
corrected to allow wakeup.
Similarly USB HS PHY and SS PHY interrupts are corrected to allow
wakeup on SDM670.
On SM8550 the X3 cluster idle state is properly described, and the
latency numbers are adjusted for all the idle states.
The PM8550 regulator supplies on X1E are corrected to match the driver
and binding, and the timer node is updated to avoid an unnecessary
validation error.
* tag 'qcom-arm64-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc8180x: Fix up PCIe nodes
arm64: dts: qcom: sc8180x: Mark PCIe hosts cache-coherent
arm64: dts: qcom: x1e80100-qcp: Fix supplies for some LDOs in PM8550
arm64: dts: qcom: sm8550: Update idle state time requirements
arm64: dts: qcom: sm8550: Separate out X3 idle state
arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK
arm64: dts: qcom: x1e80100: align mem timer size cells with bindings
arm64: dts: qcom: sc7280: Mark SDHCI hosts as cache-coherent
arm64: dts: qcom: sc8180x: fix USB SS wakeup
arm64: dts: qcom: sdm670: fix USB SS wakeup
arm64: dts: qcom: sdm670: fix USB DP/DM HS PHY interrupts
Link: https://lore.kernel.org/r/20231231034108.3262678-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Qualcomm Arm32 DeviceTree updates fr v6.8
The recently introduced changes to the SDX55 USB controller interrupt
flags prevents the USB controller from probing. These patches corrects
the PDC's interrupt-cells, so that appropriate interrupt controller
(which supports both-edge interrupts) can be used instead, which
resolves the issue.
The SDX55 PCIe PHY base address is also adjusted, from a mistake when
the node recently was transitioned to the modernized DeviceTree binding.
* tag 'qcom-arm32-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: sdx55: Fix the base address of PCIe PHY
ARM: dts: qcom: sdx55: fix USB SS wakeup
ARM: dts: qcom: sdx55: fix USB DP/DM HS PHY interrupts
ARM: dts: qcom: sdx55: fix pdc '#interrupt-cells'
Link: https://lore.kernel.org/r/20231231033153.3262575-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.8, please pull the following:
- Rafal adds a Device Tree node for the BCM63138 high-speed UART used
for Bluetooth devices
* tag 'arm-soc/for-6.8/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: Add BCM63138's high speed UART
Link: https://lore.kernel.org/r/20231228085822.3656546-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ARM: sprd: DTS and bindings for v6.8-rc1
Unisoc ARM64 DTS and bindings changes are:
- Fixed a few dtb_check warnings
- Add bindings for a new SoC - UMS9620
- Fixed an issue on UMS512
* tag 'sprd-dt-6.8-rc1' of https://github.com/lyrazhang/linux:
arm64: dts: sprd: Change UMS512 idle-state nodename to match bindings
arm64: dts: sprd: Add clock reference for pll2 on UMS512
arm64: dts: sprd: Removed unused clock references from etm nodes
arm64: dts: sprd: Add support for Unisoc's UMS9620
dt-bindings: arm: Add compatible strings for Unisoc's UMS9620
arm64: dts: sprd: fix the cpu node for UMS512
Link: https://lore.kernel.org/r/20231228084958.1439115-1-chunyan.zhang@unisoc.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pick up these commits from Linus's tree:
b106bcf0f99a ("locking/osq_lock: Clarify osq_wait_next()")
563adbfc351b ("locking/osq_lock: Clarify osq_wait_next() calling convention")
7c2230982129 ("locking/osq_lock: Move the definition of optimistic_spin_node into osq_lock.c")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
A few more Qualcomm Arm64 defconfig updates for v6.8
This enables the base drivers necessary to boot devices on the X1E
platform.
The GPU clock controller for SM8450/SM8550 is enabled and the SC8280XP
camera clock controller is enabled, to enable respective functionality
on these platforms.
* tag 'qcom-arm64-defconfig-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SC8280XP camera clock controller
arm64: defconfig: enable GPU clock controller for SM8[45]50
arm64: defconfig: Enable X1E80100 SoC base configs
Link: https://lore.kernel.org/r/20231231034648.3262882-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Drop empty and redundant maintainer entries for boards which were
removed to fix `scripts/get_maintainer.pl --self-test=sections` errors
like:
./MAINTAINERS:2021: warning: section without file pattern ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
[arnd: only remove the obviously stale ones for now]
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Steve Sakoman <sakoman@gmail.com>
Cc: Mark F. Brown <mark.brown314@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231218134532.50599-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
My commit deleting the PB11MPCore apparently left a few dangling
structs in the perf event code. Fix it up.
Fixes: 2560cffd2134 ("ARM: Delete ARM11MPCore (ARM11 ARMv6K SMP) support")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20231224-drop-11mpcore-fix-v1-1-d8b16d1c1fae@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Currently, each trip point defined in the device tree corresponds to a
single hardware interrupt. This commit instead switches to using two
hardware interrupts, whose values are set dynamically using the
set_trips callback. Additionally, the critical temperature threshold is
handled specifically.
Setting interrupts in this way also fixes a long-standing lockdep
warning, which was caused by calling thermal_zone_get_trips with our
lock being held. Do note that this requires TMU initialization to be
split into two parts, as done by the parent commit: parts of the
initialization call into the thermal_zone_device structure and so must
be done after its registration, but the initialization is also
responsible for setting up calibration, which must be done before
thermal_zone_device registration, which will call set_trips for the
first time; if the calibration is not done in time, the interrupt values
will be silently wrong!
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-10-m.majewski2@samsung.com
|
|
The original driver did not use that macro and it allows us to make our
intentions slightly clearer.
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-9-m.majewski2@samsung.com
|
|
This will be needed in the future, as the thermal zone subsystem might
call our callbacks right after devm_thermal_of_zone_register. Currently
we just make get_temp return EAGAIN in such case, but this will not be
possible with state-modifying callbacks, for instance set_trips.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-8-m.majewski2@samsung.com
|
