Age | Commit message (Collapse) | Author |
|
The tracefs file "buffer_percent" is to allow user space to set a
water-mark on how much of the tracing ring buffer needs to be filled in
order to wake up a blocked reader.
0 - is to wait until any data is in the buffer
1 - is to wait for 1% of the sub buffers to be filled
50 - would be half of the sub buffers are filled with data
100 - is not to wake the waiter until the ring buffer is completely full
Unfortunately the test for being full was:
dirty = ring_buffer_nr_dirty_pages(buffer, cpu);
return (dirty * 100) > (full * nr_pages);
Where "full" is the value for "buffer_percent".
There is two issues with the above when full == 100.
1. dirty * 100 > 100 * nr_pages will never be true
That is, the above is basically saying that if the user sets
buffer_percent to 100, more pages need to be dirty than exist in the
ring buffer!
2. The page that the writer is on is never considered dirty, as dirty
pages are only those that are full. When the writer goes to a new
sub-buffer, it clears the contents of that sub-buffer.
That is, even if the check was ">=" it would still not be equal as the
most pages that can be considered "dirty" is nr_pages - 1.
To fix this, add one to dirty and use ">=" in the compare.
Link: https://lore.kernel.org/linux-trace-kernel/20231226125902.4a057f1d@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 03329f9939781 ("tracing: Add tracefs file buffer_percentage")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull CS35L41 codec extension series.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added at probe. This was needed in order to allow the
SoC to enter the deepest Package C state. To fix the regression and at
least support PC10 during suspend, move the LTR ignore from probe to the
suspend callback, and enable it again on resume. This solution will allow
PC10 during suspend but restrict Package C entry at runtime to no deeper
than PC8/9 while a network cable it attach to the PCH LAN.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-6-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added during probe. The fix will move the ignore to
occur at suspend-time (so as to not affect suspend power). This will
require the ability to enable the LTR again on resume. Modify
pmc_core_send_ltr_ignore() to allow enabling an LTR.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add a suspend callback to struct pmc for performing platform specific tasks
before device suspend. This is needed in order to perform GBE LTR ignore on
certain platforms at suspend-time instead of at probe-time and replace the
GBE LTR ignore removal that was done in order to fix a bug introduced by
commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()").
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-4-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.
To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: stable@vger.kernel.org
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Link: https://lore.kernel.org/r/20231229063912.2517922-2-shinichiro.kawasaki@wdc.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
These models use 2 or 4 CS35L41 amps with HDA using SPI and I2C.
Models use internal and external boost.
All models require DSD support to be added inside
cs35l41_hda_property.c
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org> # v6.7+
Link: https://lore.kernel.org/r/20231221132518.3213-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some laptops without _DSD have the SPI speed set very low in the BIOS.
Since the SPI controller uses this speed as its max speed, the SPI
transactions are very slow. Firmware download writes to many registers,
and if the SPI speed is too slow, it can take a long time to download.
For this reason, disable firmware loading if the maximum SPI speed is
too low. Without Firmware, audio playback will work, but the volume
will be low to ensure safe operation of the CS35L41.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org> # v6.7+
Link: https://lore.kernel.org/r/20231221132518.3213-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add new model entries into configuration table.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org> # v6.7+
Link: https://lore.kernel.org/r/20231221132518.3213-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When compiling with gcc version 14.0.0 20231220 (experimental)
and W=1, I've noticed the following warning:
sound/core/seq/seq_memory.c: In function 'snd_seq_pool_init':
sound/core/seq/seq_memory.c:445:41: warning: 'kvmalloc_array' sizes specified with
'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
445 | cellptr = kvmalloc_array(sizeof(struct snd_seq_event_cell), pool->size,
| ^~~~~~
Since 'n' and 'size' arguments of 'kvmalloc_array()' are multiplied
to calculate the final size, their actual order doesn't affect the
result and so this is not a bug. But it's still worth to fix it.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231221091605.14660-1-dmantipov@yandex.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove sound controls in hda_unbind to make
module loadable after module unload.
Add a driver specific struct (tas2781_hda) to store
the controls.
This patch depends on patch:
ALSA: hda/tas2781: do not use regcache
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/362aa3e2f81b9259a3e5222f576bec5debfc5e88.1703204848.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
allow driver specific driver data in tas2781-hda-i2c and tas2781-i2c
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/1398bd8bf3e935b1595a99128320e4a1913e210a.1703204848.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Correct typos.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/ead5609d63e71e8e87c13e1767decca5b272d696.1703203812.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are two problems with using regcache in this module.
The amplifier has 3 addressing levels (BOOK, PAGE, REG). The firmware
contains blocks that must be written to BOOK 0x8C. The regcache doesn't
know anything about BOOK, so regcache_sync writes invalid values to the
actual BOOK.
The module handles 2 or more separate amplifiers. The amplifiers have
different register values, and the module uses only one regmap/regcache
for all the amplifiers. The regcache_sync only writes the last amplifier
used.
The module successfully restores all the written register values (RC
profile, program, configuration, calibration) without regcache.
Remove regcache functions and set regmap cache_type to REGCACHE_NONE.
Link: https://lore.kernel.org/r/21a183b5a08cb23b193af78d4b1114cc59419272.1701906455.git.soyer@irl.hu/
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Acked-by: Mark Brown <broonie@kernel.org>
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/491aeed0e2eecc3b704ec856f815db21bad3ba0e.1703202126.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a CPU is taken offline, the contribution of its cfs_rqs to task_groups'
load may remain and will negatively impact the calculation of the share of
the online CPUs.
To fix this bug, clear the contribution of an offlining CPU to task groups'
load and skip its contribution while it is inactive.
Here's the reproducer of the anomaly, by Imran Khan:
"So far I have encountered only one rather lengthy way of reproducing this issue,
which is as follows:
1. Take a KVM guest (booted with 4 CPUs and can be scaled up to 124 CPUs) and
create 2 custom cgroups: /sys/fs/cgroup/cpu/test_group_1 and /sys/fs/cgroup/
cpu/test_group_2
2. Assign a CPU intensive workload to each of these cgroups and start the
workload.
For my tests I am using following app:
int main(int argc, char *argv[])
{
unsigned long count, i, val;
if (argc != 2) {
printf("usage: ./a.out <number of random nums to generate> \n");
return 0;
}
count = strtoul(argv[1], NULL, 10);
printf("Generating %lu random numbers \n", count);
for (i = 0; i < count; i++) {
val = rand();
val = val % 2;
//usleep(1);
}
printf("Generated %lu random numbers \n", count);
return 0;
}
Also since the system is booted with 4 CPUs, in order to completely load the
system I am also launching 4 instances of same test app under:
/sys/fs/cgroup/cpu/
3. We can see that both of the cgroups get similar CPU time:
# systemd-cgtop --depth 1
Path Tasks %CPU Memory Input/s Output/s
/ 659 - 5.5G - -
/system.slice - - 5.7G - -
/test_group_1 4 - - - -
/test_group_2 3 - - - -
/user.slice 31 - 56.5M - -
Path Tasks %CPU Memory Input/s Output/s
/ 659 394.6 5.5G - -
/test_group_2 3 65.7 - - -
/user.slice 29 55.1 48.0M - -
/test_group_1 4 47.3 - - -
/system.slice - 2.2 5.7G - -
Path Tasks %CPU Memory Input/s Output/s
/ 659 394.8 5.5G - -
/test_group_1 4 62.9 - - -
/user.slice 28 44.9 54.2M - -
/test_group_2 3 44.7 - - -
/system.slice - 0.9 5.7G - -
Path Tasks %CPU Memory Input/s Output/s
/ 659 394.4 5.5G - -
/test_group_2 3 58.8 - - -
/test_group_1 4 51.9 - - -
/user.slice 30 39.3 59.6M - -
/system.slice - 1.9 5.7G - -
Path Tasks %CPU Memory Input/s Output/s
/ 659 394.7 5.5G - -
/test_group_1 4 60.9 - - -
/test_group_2 3 57.9 - - -
/user.slice 28 43.5 36.9M - -
/system.slice - 3.0 5.7G - -
Path Tasks %CPU Memory Input/s Output/s
/ 659 395.0 5.5G - -
/test_group_1 4 66.8 - - -
/test_group_2 3 56.3 - - -
/user.slice 29 43.1 51.8M - -
/system.slice - 0.7 5.7G - -
4. Now move systemd-udevd to one of these test groups, say test_group_1, and
perform scale up to 124 CPUs followed by scale down back to 4 CPUs from the
host side.
5. Run the same workload i.e 4 instances of CPU hogger under /sys/fs/cgroup/cpu
and one instance of CPU hogger each in /sys/fs/cgroup/cpu/test_group_1 and
/sys/fs/cgroup/test_group_2.
It can be seen that test_group_1 (the one where systemd-udevd was moved) is getting
much less CPU time than the test_group_2, even though at this point of time both of
these groups have only CPU hogger running:
# systemd-cgtop --depth 1
Path Tasks %CPU Memory Input/s Output/s
/ 1219 - 5.4G - -
/system.slice - - 5.6G - -
/test_group_1 4 - - - -
/test_group_2 3 - - - -
/user.slice 26 - 91.3M - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 394.3 5.4G - -
/test_group_2 3 82.7 - - -
/test_group_1 4 14.3 - - -
/system.slice - 0.8 5.6G - -
/user.slice 26 0.4 91.2M - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 394.6 5.4G - -
/test_group_2 3 67.4 - - -
/system.slice - 24.6 5.6G - -
/test_group_1 4 12.5 - - -
/user.slice 26 0.4 91.2M - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 395.2 5.4G - -
/test_group_2 3 60.9 - - -
/system.slice - 27.9 5.6G - -
/test_group_1 4 12.2 - - -
/user.slice 26 0.4 91.2M - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 395.2 5.4G - -
/test_group_2 3 69.4 - - -
/test_group_1 4 13.9 - - -
/user.slice 28 1.6 92.0M - -
/system.slice - 1.0 5.6G - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 395.6 5.4G - -
/test_group_2 3 59.3 - - -
/test_group_1 4 14.1 - - -
/user.slice 28 1.3 92.2M - -
/system.slice - 0.7 5.6G - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 395.5 5.4G - -
/test_group_2 3 67.2 - - -
/test_group_1 4 11.5 - - -
/user.slice 28 1.3 92.5M - -
/system.slice - 0.6 5.6G - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 395.1 5.4G - -
/test_group_2 3 76.8 - - -
/test_group_1 4 12.9 - - -
/user.slice 28 1.3 92.8M - -
/system.slice - 1.2 5.6G - -
From sched_debug data it can be seen that in bad case the load.weight of per-CPU
sched entities corresponding to test_group_1 has reduced significantly and
also load_avg of test_group_1 remains much higher than that of test_group_2,
even though systemd-udevd stopped running long time back and at this point of
time both cgroups just have the CPU hogger app as running entity."
[ mingo: Added details from the original discussion, plus minor edits to the patch. ]
Reported-by: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Imran Khan <imran.f.khan@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lore.kernel.org/r/20231223111545.62135-1-vincent.guittot@linaro.org
|
|
As explained in commit e03781879a0d ("drop_monitor: Require
'CAP_SYS_ADMIN' when joining "events" group"), the "flags" field in the
multicast group structure reuses uAPI flags despite the field not being
exposed to user space. This makes it impossible to extend its use
without adding new uAPI flags, which is inappropriate for internal
kernel checks.
Solve this by adding internal flags (i.e., "GENL_MCAST_*") and convert
the existing users to use them instead of the uAPI flags.
Tested using the reproducers in commit 44ec98ea5ea9 ("psample: Require
'CAP_NET_ADMIN' when joining "packets" group") and commit e03781879a0d
("drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group").
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When unregistering the DPLL subsystem the priv pointer is different then
the one used for registration which cause failure in unregistering.
Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of tracing the address of the recovery handler, use the name
in the defer op, similar to other defer ops related tracepoints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
dfp will be freed by ->recover_work and thus the tracepoint in case
of an error can lead to a use after free.
Store the defer ops in a local variable to avoid that.
Fixes: 7f2f7531e0d4 ("xfs: store an ops pointer in struct xfs_defer_pending")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
asserts
Since commit deed9512872d ("xfs: Check for -ENOATTR or -EEXIST"), the
high-level attr code does a lookup for any attr we're trying to set,
and does the checks to handle the create vs replace cases, which thus
never hit the low-level attr code.
Turn the checks in xfs_attr_shortform_addname as they must never trip.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Remove the last two users of the typedef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
sparse complains about struct xfs_attr_shortform because it embeds a
structure with a variable sized array in a variable sized array.
Given that xfs_attr_shortform is not a very useful structure, and the
dir2 equivalent has been removed a long time ago, remove it as well.
Provide a xfs_attr_sf_firstentry helper that returns the first
xfs_attr_sf_entry behind a xfs_attr_sf_hdr to replace the structure
dereference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_attr_shortform_getvalue duplicates the logic in xfs_attr_sf_findname.
Use the helper instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_attr_shortform_lookup is only used by xfs_attr_shortform_addname,
which is much better served by calling xfs_attr_sf_findname. Switch
it over and remove xfs_attr_shortform_lookup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_attr_sf_findname has the simple job of finding a xfs_attr_sf_entry in
the attr fork, but the convoluted calling convention obfuscates that.
Return the found entry as the return value instead of an pointer
argument, as the -ENOATTR/-EEXIST can be trivally derived from that, and
remove the basep argument, as it is equivalent of the offset of sfe in
the data for if an sfe was found, or an offset of totsize if not was
found. To simplify the totsize computation add a xfs_attr_sf_endptr
helper that returns the imaginative xfs_attr_sf_entry at the end of
the current attrs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
trace_xfs_attr_sf_lookup is currently only called by
xfs_attr_shortform_lookup, which despit it's name is a simple helper for
xfs_attr_shortform_addname, which has it's own tracing. Move the
callsite to xfs_attr_shortform_getvalue, which is the closest thing to
a high level lookup we have for the Linux xattr API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Many of the xfs_idata_realloc callers need to set a local pointer to the
just reallocated if_data memory. Return the pointer to simplify them a
bit and use the opportunity to re-use krealloc for freeing if_data if the
size hits 0.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
The xfs_ifork structure currently has a union of the if_root void pointer
and the if_data char pointer. In either case it is an opaque pointer
that depends on the fork format. Replace the union with a single if_data
void pointer as that is what almost all callers want. Only the symlink
NULL termination code in xfs_init_local_fork actually needs a new local
variable now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablu Neira Syuso says:
====================
netfilter pull request 23-12-20
The following patchset contains Netfilter fixes for net:
1) Skip set commit for deleted/destroyed sets, this might trigger
double deactivation of expired elements.
2) Fix packet mangling from egress, set transport offset from
mac header for netdev/egress.
Both fixes address bugs already present in several releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the iucv_bus variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-s390@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge our topic branch containing KVM related patches.
|
|
Commit 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian
builds"), merged in Linux-6.5-rc1 changes the calling ABI in a way
that is incompatible with the current code for the PS3's LV1 hypervisor
calls.
This change just adds the line '# CONFIG_PPC64_BIG_ENDIAN_ELF_ABI_V2 is not set'
to the ps3_defconfig file so that the PPC64_ELF_ABI_V1 is used.
Fixes run time errors like these:
BUG: Kernel NULL pointer dereference at 0x00000000
Faulting instruction address: 0xc000000000047cf0
Oops: Kernel access of bad area, sig: 11 [#1]
Call Trace:
[c0000000023039e0] [c00000000100ebfc] ps3_create_spu+0xc4/0x2b0 (unreliable)
[c000000002303ab0] [c00000000100d4c4] create_spu+0xcc/0x3c4
[c000000002303b40] [c00000000100eae4] ps3_enumerate_spus+0xa4/0xf8
Fixes: 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian builds")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/df906ac1-5f17-44b9-b0bb-7cd292a0df65@infradead.org
|
|
The MPC8610 symbol used to be default y if MPC8610_HPCD, but since
MPC8610_HPCD was removed MPC8610 is now never used. Remove it.
Fixes: 248667f8bbde ("powerpc: drop HPCD/MPC8610 evaluation platform support")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231123032902.2760818-1-mpe@ellerman.id.au
|
|
In some configurations e.g. systems with CXL, a numa node can have 0
cpus and cpumask_nth() will return a cpu value that doesn't exist,
which will result in an attempt to add an entry to the wq table at a
bad index.
To fix this, when iterating the cpus for a node, skip any node that
doesn't have cpus.
Also, as a precaution, add a warning and bail if cpumask_nth() returns
a nonexistent cpu.
Reported-by: Zhang, Rex <rex.zhang@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The req->dst buffer size should be checked before copying from the
scomp_scratch->dst to avoid req->dst buffer overflow problem.
Fixes: 1ab53a77b772 ("crypto: acomp - add driver-side scomp interface")
Reported-by: syzbot+3eff5e51bf1db122a16e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000000b05cd060d6b5511@google.com/
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert sahara driver to use crypto_engine, rather than doing manual queue
management.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Do not spam the kernel log with unnecessary error messages when processing
requests that aren't a multiple of AES block size.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove unnecessary 'dev_ptr' NULL assignments in sahara_remove() and
sahara_probe().
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The 'active' flag is only used to indirectly set the 'first' flag.
Drop the 'active' flag and set 'first' directly in sahara_sha_init().
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Switch to use dev_err_probe() to simplify the error paths and unify
message template. While at it, also remove explicit error messages
from every potential -ENOMEM.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use devm_clk_get_enabled() helper to simplify probe/remove code. Also, use
dev_err_probe() for error reporting.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Where applicable, use BIT() macro instead of shift operation to improve
readability. No functional change.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the same indentation style for all macros.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When testing sahara sha256 speed performance with tcrypt (mode=404) on
imx53-qsrb board, multiple "Invalid numbers of src SG." errors are
reported. This was traced to sahara_walk_and_recalc() resizing req->src
and causing the subsequent dma_map_sg() call to fail.
Now that the previous commit fixed sahara_sha_hw_links_create() to take
into account the actual request size, rather than relying on sg->length
values, the resize operation is no longer necessary.
Therefore, remove sahara_walk_and_recalc() and simplify associated logic.
Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It's not always the case that the entire sg entry needs to be processed.
Currently, when nbytes is less than sg->length, "Descriptor length" errors
are encountered.
To fix this, take the actual request size into account when populating the
hw links.
Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
sahara_sha_hw_data_descriptor_create() returns negative error codes on
failure, so make sure the errors are correctly handled / propagated.
Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The sg lists are not unmapped in case of timeout errors. Fix this.
Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256")
Fixes: 5de8875281e1 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Set the reqsize for sha algorithms to sizeof(struct sahara_sha_reqctx), the
extra space is not needed.
Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In case of a zero-length input, exit gracefully from sahara_aes_crypt().
Fixes: 5de8875281e1 ("crypto: sahara - Add driver for SAHARA2 accelerator.")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 31865c4c4db2 ("crypto: skcipher - Add lskcipher") moved some
fields from 'struct skcipher_alg' into SKCIPHER_ALG_COMMON but didn't
remove the corresponding kerneldoc members, which results in these
warnings when running 'make htmldocs':
./include/crypto/skcipher.h:182: warning: Excess struct member 'min_keysize' description in 'skcipher_alg'
./include/crypto/skcipher.h:182: warning: Excess struct member 'max_keysize' description in 'skcipher_alg'
./include/crypto/skcipher.h:182: warning: Excess struct member 'ivsize' description in 'skcipher_alg'
./include/crypto/skcipher.h:182: warning: Excess struct member 'chunksize' description in 'skcipher_alg'
./include/crypto/skcipher.h:182: warning: Excess struct member 'stat' description in 'skcipher_alg'
./include/crypto/skcipher.h:182: warning: Excess struct member 'base' description in 'skcipher_alg'
SKCIPHER_ALG_COMMON already has the documentation for all these fields.
Fixes: 31865c4c4db2 ("crypto: skcipher - Add lskcipher")
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|