| Age | Commit message (Collapse) | Author |
|---|
|
Create separate functions, dpaa2_switch_port_prechangeupper and
dpaa2_switch_port_changeupper, to be called directly when a DPSW port
changes its upper device.
This way we are not open-coding everything in the main event callback
and we can easily extent, for example, with bond offload.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DPSW object has multiple event sources multiplexed over the same
IRQ. The driver has the capability to configure only some of these
events to trigger the IRQ.
The dpsw_get_irq_status() can clear events automatically based on the
value stored in the 'status' variable passed to it. We don't want that
to happen because we could get into a situation when we are clearing
more events than we actually handled.
Just resort to manually clearing the events that we handled. Also, since
status is not used on the out path we remove its initialization to zero.
This change does not have a user-visible effect because the dpaa2-switch
driver enables and handles all the DPSW events which exist at the
moment.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support")
added support for MAC endpoints in the dpaa2-switch driver but omitted
to add the ENDPOINT_CHANGED irq to the list of interrupt sources. Fix
this by extending the list of events which can raise an interrupt by
extending the mask passed to the dpsw_set_irq_mask() firmware API.
There is no user visible impact even without this patch since whenever a
switch interface is connected/disconnected from an endpoint both events
are set (LINK_CHANGED and ENDPOINT_CHANGED) and, luckily, the
LINK_CHANGED event could actually raise the interrupt and thus get the
MAC/PHY SW configuration started.
Even with this, it's better to just not rely on undocumented firmware
behavior which can change.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Print a netdev error when we hit a case in which a specific VLAN is
already configured on the port. While at it, change the already existing
netdev_warn into an _err for consistency purposes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no restriction around the change of the MAC address on the
switch ports, thus declare the interface netdevs IFF_LIVE_ADDR_CHANGE
capable.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no point in updating the MAC address of a switch interface each
time the link state changes, this only needs to happen in case the
endpoint changes (the switch interface is [dis]connected from/to a MAC).
Just move the call to dpaa2_switch_port_set_mac_addr() under
DPSW_IRQ_EVENT_ENDPOINT_CHANGED.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Roger Quadros says:
====================
net: ethernet: am65-cpsw: Add mqprio, frame preemption & coalescing
This series adds mqprio qdisc offload in channel mode,
Frame Preemption MAC merge support and RX/TX coalesing
for AM65 CPSW driver.
In v11 following changes were made
- Fix patch "net: ethernet: ti: am65-cpsw: add mqprio qdisc offload in channel mode"
by including units.h
Changelog information in each patch file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add SW IRQ coalescing based on hrtimers for TX and RX data path which
can be enabled by ethtool commands:
- RX coalescing
ethtool -C eth1 rx-usecs 50
- TX coalescing can be enabled per TX queue
- by default enables coalesing for TX0
ethtool -C eth1 tx-usecs 50
- configure TX0
ethtool -Q eth0 queue_mask 1 --coalesce tx-usecs 100
- configure TX1
ethtool -Q eth0 queue_mask 2 --coalesce tx-usecs 100
- configure TX0 and TX1
ethtool -Q eth0 queue_mask 3 --coalesce tx-usecs 100 --coalesce tx-usecs 100
show configuration for TX0 and TX1:
ethtool -Q eth0 queue_mask 3 --show-coalesce
Comparing to gro_flush_timeout and napi_defer_hard_irqs, this patch
allows to enable IRQ coalesing for RX path separately.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add driver support for viewing / changing the MAC Merge sublayer
parameters and seeing the verification state machine's current state
via ethtool.
As hardware does not support interrupt notification for verification
events we resort to polling on link up. On link up we try a couple of
times for verification success and if unsuccessful then give up.
The Frame Preemption feature is described in the Technical Reference
Manual [1] in section:
12.3.1.4.6.7 Intersperced Express Traffic (IET – P802.3br/D2.0)
Due to Silicon Errata i2208 [2] we set limit min IET fragment size to
124 (excluding 4 bytes mCRC).
[1] AM62x TRM - https://www.ti.com/lit/ug/spruiv7a/spruiv7a.pdf
[2] AM62x Silicon Errata - https://www.ti.com/lit/er/sprz487c/sprz487c.pdf
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds MQPRIO Qdisc offload in full 'channel' mode which allows
not only setting up pri:tc mapping, but also configuring TX shapers
(rate-limiting) on external port FIFOs.
The MQPRIO Qdisc offload is expected to work with or without VLAN/priority
tagged packets.
The CPSW external Port FIFO has 8 Priority queues. The rate-limit can be
set for each of these priority queues. Which Priority queue a packet is
assigned to depends on PN_REG_TX_PRI_MAP register which maps header
priority to switch priority.
The header priority of a packet is assigned via the RX_PRI_MAP_REG which
maps packet priority to header priority.
The packet priority is either the VLAN priority (for VLAN tagged packets)
or the thread/channel offset.
For simplicity, we assign the same priority queue to all queues of a
Traffic Class so it can be rate-limited correctly.
Configuration example:
ethtool -L eth1 tx 5
ethtool --set-priv-flags eth1 p0-rx-ptype-rrobin off
tc qdisc add dev eth1 parent root handle 100: mqprio num_tc 3 \
map 0 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 hw 1 mode channel \
shaper bw_rlimit min_rate 0 100mbit 200mbit max_rate 0 101mbit 202mbit
tc qdisc replace dev eth2 handle 100: parent root mqprio num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@0 hw 1
ip link add link eth1 name eth1.100 type vlan id 100
ip link set eth1.100 type vlan egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
In the above example two ports share the same TX CPPI queue 0 for low
priority traffic. 3 traffic classes are defined for eth1 and mapped to:
TC0 - low priority, TX CPPI queue 0 -> ext Port 1 fifo0, no rate limit
TC1 - prio 2, TX CPPI queue 1 -> ext Port 1 fifo1, CIR=100Mbit/s, EIR=1Mbit/s
TC2 - prio 3, TX CPPI queue 2 -> ext Port 1 fifo2, CIR=200Mbit/s, EIR=2Mbit/s
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move register definitions to header file. No functional change.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move this code around to avoid forward declaration.
No functional change.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Handle offloading commands using switch-case in
am65_cpsw_setup_taprio().
Move checks to am65_cpsw_taprio_replace().
Use NL_SET_ERR_MSG_MOD for error messages.
Change error message from "Failed to set cycle time extension"
to "cycle time extension not supported"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We will use this Kconfig option to not only enable TAS/EST offload
but also other QoS features like Multiqueue priority descriptors
and MAC-Merge/Frame Preemption. TI_AM65_CPSW_QOS seems a more
appropriate Kconfig option name than TI_AM65_CPSW_TAS.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Build am65-cpsw-qos only if CONFIG_TI_AM65_CPSW_TAS is enabled.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
report pMAC stats
Some devices do not support individual 'pmac' and 'emac' stats.
For such devices, resort to 'aggregate' stats.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some devices have errata due to which they cannot report ETH_ZLEN (60)
in the rx-min-frag-size. This was foreseen of course, and lldpad has
logic that when we request it to advertise addFragSize 0, it will round
it up to the lowest value that is _actually_ supported by the hardware.
The problem is that the selftest expects lldpad to report back to us the
same value as we requested.
Make the selftest smarter by figuring out on its own what is a
reasonable value to expect.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hangbin Liu says:
====================
Convert net selftests to run in unique namespace (last part)
Here is the last part of converting net selftests to run in unique namespace.
This part converts all left tests. After the conversion, we can run the net
sleftests in parallel. e.g.
# ./run_kselftest.sh -n -t net:reuseport_bpf
TAP version 13
1..1
# selftests: net: reuseport_bpf
ok 1 selftests: net: reuseport_bpf
mod 10...
# Socket 0: 0
# Socket 1: 1
...
# Socket 4: 19
# Testing filter add without bind...
# SUCCESS
# ./run_kselftest.sh -p -n -t net:cmsg_so_mark.sh -t net:cmsg_time.sh -t net:cmsg_ipv6.sh
TAP version 13
1..3
# selftests: net: cmsg_so_mark.sh
ok 1 selftests: net: cmsg_so_mark.sh
# selftests: net: cmsg_time.sh
ok 2 selftests: net: cmsg_time.sh
# selftests: net: cmsg_ipv6.sh
ok 3 selftests: net: cmsg_ipv6.sh
# ./run_kselftest.sh -p -n -c net
TAP version 13
1..95
# selftests: net: reuseport_bpf_numa
ok 3 selftests: net: reuseport_bpf_numa
# selftests: net: reuseport_bpf_cpu
ok 2 selftests: net: reuseport_bpf_cpu
# selftests: net: sk_bind_sendto_listen
ok 9 selftests: net: sk_bind_sendto_listen
# selftests: net: reuseaddr_conflict
ok 5 selftests: net: reuseaddr_conflict
...
Here is the part 1 link:
https://lore.kernel.org/netdev/20231202020110.362433-1-liuhangbin@gmail.com
part 2 link:
https://lore.kernel.org/netdev/20231206070801.1691247-1-liuhangbin@gmail.com
part 3 link:
https://lore.kernel.org/netdev/20231213060856.4030084-1-liuhangbin@gmail.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a variable RUN_IN_NETNS if the user wants to run all the selected tests
in namespace in parallel. With this, we can save a lot of testing time.
Note that some tests may not fit to run in namespace, e.g.
net/drop_monitor_tests.sh, as the dwdump needs to be run in init ns.
I also added another parameter -p to make all the logs reported separately
instead of mixing them in the stdout or output.log.
Nit: the NUM in run_one is not used, rename it to test_num.
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh
Here is the test result after conversion.
# ./pmtu.sh
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
TEST: ipv6: PMTU exceptions [ OK ]
TEST: ipv6: PMTU exceptions - nexthop objects [ OK ]
...
TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv6: list and flush cached exceptions [ OK ]
TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv4: PMTU exception w/route replace [ OK ]
TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ]
TEST: ipv6: PMTU exception w/route replace [ OK ]
TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The setup_loopback and setup_veth use their own way to create namespace.
So let's just re-define server_ns/client_ns to unique name.
At the same time update the namespace name in gro.sh and toeplitz.sh.
As I don't have env to run toeplitz.sh. Here is only the gro test result.
# ./gro.sh
running test ipv4 data
Expected {200 }, Total 1 packets
Received {200 }, Total 1 packets.
...
Gro::large test passed.
All Tests Succeeded!
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here is the test result after conversion.
# ./xfrm_policy.sh
PASS: policy before exception matches
PASS: ping to .254 bypassed ipsec tunnel (exceptions)
PASS: direct policy matches (exceptions)
PASS: policy matches (exceptions)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies)
PASS: direct policy matches (exceptions and block policies)
PASS: policy matches (exceptions and block policies)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hresh changes)
PASS: direct policy matches (exceptions and block policies after hresh changes)
PASS: policy matches (exceptions and block policies after hresh changes)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hthresh change in ns3)
PASS: direct policy matches (exceptions and block policies after hthresh change in ns3)
PASS: policy matches (exceptions and block policies after hthresh change in ns3)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after htresh change to normal)
PASS: direct policy matches (exceptions and block policies after htresh change to normal)
PASS: policy matches (exceptions and block policies after htresh change to normal)
PASS: policies with repeated htresh change
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here is the test result after conversion.
# ./stress_reuseport_listen.sh
listen 24000 socks took 0.47714
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When running the test in namespace, the debugfs may not load automatically.
So add a checking to make sure debugfs loaded. Here is the test result
after conversion.
# ./rtnetlink.sh
PASS: policy routing
PASS: route get
...
PASS: address proto IPv4
PASS: address proto IPv6
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This test will move the device to netns 1. Add a new test_ns to do this.
Here is the test result after conversion.
# ./netns-name.sh
netns-name.sh [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here is the test result after conversion.
# ./gre_gso.sh
TEST: GREv6/v4 - copy file w/ TSO [ OK ]
TEST: GREv6/v4 - copy file w/ GSO [ OK ]
TEST: GREv6/v6 - copy file w/ TSO [ OK ]
TEST: GREv6/v6 - copy file w/ GSO [ OK ]
Tests passed: 4
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No functional modification involved.
./tools/testing/selftests/net/tcp_ao/setsockopt-closed.c:121:2-3: Unneeded semicolon.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7771
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial fix for out-of-tree build that I wasn't testing previously:
1. Create a directory for library object files, fixes:
> gcc lib/kconfig.c -Wall -O2 -g -D_GNU_SOURCE -fno-strict-aliasing -I ../../../../../usr/include/ -iquote /tmp/kselftest/kselftest/net/tcp_ao/lib -I ../../../../include/ -o /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o -c
> Assembler messages:
> Fatal error: can't create /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o: No such file or directory
> make[1]: *** [Makefile:46: /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o] Error 1
2. Include $(KHDR_INCLUDES) that's exported by selftests/Makefile, fixes:
> In file included from lib/kconfig.c:6:
> lib/aolib.h:320:45: warning: ‘struct tcp_ao_add’ declared inside parameter list will not be visible outside of this definition or declaration
> 320 | extern int test_prepare_key_sockaddr(struct tcp_ao_add *ao, const char *alg,
> | ^~~~~~~~~~
...
3. While at here, clean-up $(KSFT_KHDR_INSTALL): it's not needed anymore
since commit f2745dc0ba3d ("selftests: stop using KSFT_KHDR_INSTALL")
4. Also, while at here, drop .DEFAULT_GOAL definition: that has a
self-explaining comment, that was valid when I made these selftests
compile on local v4.19 kernel, but not needed since
commit 8ce72dc32578 ("selftests: fix headers_install circular dependency")
Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312190645.q76MmHyq-lkp@intel.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove documentation for nonexistent struct members, addressing these
warnings:
./net/tipc/link.c:228: warning: Excess struct member 'media_addr' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'timer' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'refcnt' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'proto_msg' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'pmsg' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'backlog_limit' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'exp_msg_count' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'reset_rcv_checkpt' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'transmitq' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'snt_nxt' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'deferred_queue' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'unacked_window' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'next_out' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'long_msg_seq_no' description in 'tipc_link'
./net/tipc/link.c:228: warning: Excess struct member 'bc_rcvr' description in 'tipc_link'
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove documentation for nonexistent structure members, addressing these
warnings:
./include/linux/skbuff.h:1063: warning: Excess struct member 'sp' description in 'sk_buff'
./include/linux/skbuff.h:1063: warning: Excess struct member 'nf_bridge' description in 'sk_buff'
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
A trivial correction to convert an 'unsigned' parameter into an
'unsigned int' parameter so the prototype matches the function
definition.
I really thought that someone submitted a patch for this a few years
ago but sadly I can't find it now.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Eric Paris is an important part of SELinux history and we are all
thankful not only for his stint as maintainer, but his numerous
contributions over the years. Unfortunately for us, Eric has moved
on to other things and hasn't contributed to the SELinux community in
several years (his last SELinux kernel commit was in 2013) so it's
time to officially drop Eric as a maintainer.
I also want to get ahead of any claims of impropriety and state that
this change has absolutely nothing to do with commit 2be4d74f2fd4 ;)
Thanks for all you've done Eric, you'll always be welcome back.
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
kvm-master
KVM/riscv fixes for 6.7, take #1
- Fix a race condition in updating external interrupt for
trap-n-emulated IMSIC swfile
- Fix print_reg defaults in get-reg-list selftest
|
|
Add Ondrej as a trusted SELinux reviewer. Ondrej has a long history
of providing quality SELinux kernel patches and we're lucky to have
him as an official SELinux reviewer.
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 6.7, part #2
- Ensure a vCPU's redistributor is unregistered from the MMIO bus
if vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
|
|
The ctx in struct lsm_ctx is an array of size ctx_len, tell the compiler
about this using __counted_by() where supported to improve the ability to
detect overflow issues.
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
