summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-15cxl/mem: Fix register block offset calculationBen Widawsky
The "Register Offset Low" register of a "DVSEC Register Locator" contains the 64K aligned offset for the registers along with the BAR indicator and an id. The implementation was treating the "Register Block Offset Low" field a value rather than as a pre-aligned component of the 64-bit offset. So, just mask, don't mask and shift (FIELD_GET). The user visible result of this bug is that the driver fails to bind to the device after none of the required blocks are found. This was missed earlier because the primary development done in the QEMU environment only uses 0 offsets, i.e. 0 shifted is still 0. Fixes: 8adaf747c9f0 ("cxl/mem: Find device capabilities") Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Link: https://lore.kernel.org/r/20210415232610.603273-1-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-04-15scsi: zfcp: Lift Request Queue tasklet & timer from qdioJulian Wiedmann
The qdio layer currently provides its own infrastructure to scan for Request Queue completions & to report them to the device driver. This comes with several drawbacks - having an async tasklet & timer construct in qdio introduces additional lifetime complexity, and makes it harder to integrate them with the rest of the device driver. The timeouts are also currently hard-coded, and can't be tweaked without affecting other qdio drivers (ie. qeth). But due to recent enhancements to the qdio layer, zfcp can actually take full control of the Request Queue completion processing. It merely needs to opt-out from the qdio layer mechanisms by setting the scan_threshold to 0, and then use qdio_inspect_queue() to scan for completions. So re-implement the tasklet & timer mechanism in zfcp, while initially copying the scan conditions from qdio's handle_outbound() and qdio_outbound_tasklet(). One minor behavioural change is that zfcp_qdio_send() will unconditionally reduce the timeout to 1 HZ, rather than leaving it at 10 Hz if it was last armed by the tasklet. This just makes things more consistent. Also note that we can drop a lot of the accumulated cruft in qdio_outbound_tasklet(), as zfcp doesn't even use PCI interrupt requests any longer. This also slightly touches the Response Queue processing, as qdio_get_next_buffers() will no longer implicitly scan for Request Queue completions. So complete the migration to qdio_inspect_queue() here as well and make the tasklet_schedule() visible. Link: https://lore.kernel.org/r/018d3ddd029f8d6ac00cf4184880288c637c4fd1.1618417667.git.bblock@linux.ibm.com Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: zfcp: Move the position of put_device()Qinglang Miao
Place the put_device() call after device_unregister() in both zfcp_unit_remove() and zfcp_sysfs_port_remove_store() to make it more natural. put_device() ought to be the last time we touch the object in both functions. Add comments after put_device() to make code clearer. Link: https://lore.kernel.org/r/0a568c7733ba0f1dde28b0c663b90270d44dd540.1618417667.git.bblock@linux.ibm.com Suggested-by: Steffen Maier <maier@linux.ibm.com> Suggested-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: zfcp: Clean up sysfs code for SFP diagnosticsJulian Wiedmann
The error path from zfcp_adapter_enqueue() no longer attempts to remove the diagnostics attributes if they haven't been created yet. So remove the manual 'sysfs_established' guard for this case, and use device_add_groups() to add all adapter-related sysfs attributes in one go. Link: https://lore.kernel.org/r/37a97537f675d643006271f37723c346189b6eec.1618417667.git.bblock@linux.ibm.com Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: zfcp: Fix sysfs roll-back on error in zfcp_adapter_enqueue()Julian Wiedmann
When zfcp_adapter_enqueue() fails to create the zfcp_sysfs_adapter_attrs group, it calls zfcp_adapter_unregister() to tear down the adapter state again. This then unconditionally attempts to remove the zfcp_sysfs_adapter_attrs group, resulting in a "group not found" WARN from sysfs code. Avoid this by copying most of zfcp_adapter_unregister() into the error path, allowing for more fine-granular roll-back. Then skip the sysfs tear-down steps if we haven't progressed this far in the initialization. Link: https://lore.kernel.org/r/790922cc3af075795fff9a4b787e6bda19bdb3be.1618417667.git.bblock@linux.ibm.com Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: zfcp: Fix indentation coding style issueYevhen Viktorov
Code indentation should use tabs where possible. Link: https://lore.kernel.org/r/e8a15a2f3d64e2e76a214647cfd4fe23d370b165.1618417667.git.bblock@linux.ibm.com Signed-off-by: Yevhen Viktorov <yevhen.viktorov@virginmedia.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: zfcp: Remove unneeded INIT_LIST_HEAD() for FSF requestsJulian Wiedmann
INIT_LIST_HEAD() is only needed for actual list heads, while req->list is used as a list entry. Note that when the error path in zfcp_fsf_req_send() removes the request from the adapter's list of pending requests, it actually looks up the request from the zfcp_reqlist - rather than just calling list_del(). So there's no risk of us calling list_del() on a request that hasn't been added to any list yet. Link: https://lore.kernel.org/r/254dc0ae28dccc43ab0b1079ef2c8dcb5fe1d2e4.1618417667.git.bblock@linux.ibm.com Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15io_uring: disable multishot poll for double poll add casesJens Axboe
The re-add handling isn't correct for the multi wait case, so let's just disable it for now explicitly until we can get that sorted out. This just turns it into a one-shot request. Since we pass back whether or not a poll request terminates in multishot mode on completion, this should not break properly behaving applications that check for IORING_CQE_F_MORE on completion. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-15scsi: qla2xxx: Reserve extra IRQ vectorsRoman Bolshakov
Commit a6dcfe08487e ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs. That breaks vector allocation assumptions in qla83xx_iospace_config(), qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions computes maximum number of qpairs as: ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default response queue) - 1 (ATIO, in dual or pure target mode) max_qpairs is set to zero in case of two CPUs and initiator mode. The number is then used to allocate ha->queue_pair_map inside qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is left NULL but the driver thinks there are queue pairs available. qla2xxx_queuecommand() tries to find a qpair in the map and crashes: if (ha->mqenable) { uint32_t tag; uint16_t hwq; struct qla_qpair *qpair = NULL; tag = blk_mq_unique_tag(cmd->request); hwq = blk_mq_unique_tag_to_hwq(tag); qpair = ha->queue_pair_map[hwq]; # <- HERE if (qpair) return qla2xxx_mqueuecommand(host, cmd, qpair); } BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G W 5.10.0-rc1+ #25 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc] RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx] Call Trace: scsi_queue_rq+0x58c/0xa60 blk_mq_dispatch_rq_list+0x2b7/0x6f0 ? __sbitmap_get_word+0x2a/0x80 __blk_mq_sched_dispatch_requests+0xb8/0x170 blk_mq_sched_dispatch_requests+0x2b/0x50 __blk_mq_run_hw_queue+0x49/0xb0 __blk_mq_delay_run_hw_queue+0xfb/0x150 blk_mq_sched_insert_request+0xbe/0x110 blk_execute_rq+0x45/0x70 __scsi_execute+0x10e/0x250 scsi_probe_and_add_lun+0x228/0xda0 __scsi_scan_target+0xf4/0x620 ? __pm_runtime_resume+0x4f/0x70 scsi_scan_target+0x100/0x110 fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc] process_one_work+0x1ea/0x3b0 worker_thread+0x28/0x3b0 ? process_one_work+0x3b0/0x3b0 kthread+0x112/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 The driver should allocate enough vectors to provide every CPU it's own HW queue and still handle reserved (MB, RSP, ATIO) interrupts. The change fixes the crash on dual core VM and prevents unbalanced QP allocation where nr_hw_queues is two less than the number of CPUs. Link: https://lore.kernel.org/r/20210412165740.39318-1-r.bolshakov@yadro.com Fixes: a6dcfe08487e ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs") Cc: Daniel Wagner <daniel.wagner@suse.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org # 5.11+ Reported-by: Aleksandr Volkov <a.y.volkov@yadro.com> Reported-by: Aleksandr Miloserdov <a.miloserdov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: smartpqi: Fix device pointer variable reference static checker issueDon Brace
Dan Carpenter found a possible NULL pointer dereference issue in function pqi_sas_port_add_rphy(): drivers/scsi/smartpqi/smartpqi_sas_transport.c:97 pqi_sas_port_add_rphy() warn: variable dereferenced before check 'pqi_sas_port->device' (see line 95) Correct issue by moving reference of pqi_sas_port->device after the check for the device pointer being non-NULL. Link: https://www.mail-archive.com/kbuild@lists.01.org/msg06329.html Link: https://lore.kernel.org/r/161850493026.7302.10032784239320437353.stgit@brunhilda Fixes: ec504b23df9d ("scsi: smartpqi: Add phy ID support for the physical drives") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: smartpqi: Fix blocks_per_row static checker issueDon Brace
Dan Carpenter found a possible divide by 0 issue in the smartpqi driver in functions pci_get_aio_common_raid_map_values() and pqi_calc_aio_r5_or_r6(). The variable rmd->blocks_per_row is used as a divisor and could be 0. Using rmd->blocks_per_row as a divisor without checking it for 0 first. Correct these possible divide by 0 conditions by insuring that rmd->blocks_per_row is not zero before usage. The check for non-0 was too late to prevent a divide by 0 condition. Add in a comment to explain why the check for non-zero is necessary. If the member is 0, return PQI_RAID_BYPASS_INELIGIBLE before any division is performed. Link: https://lore.kernel.org/linux-scsi/YG%2F5kWHHAr7w5dU5@mwanda/ Link: https://lore.kernel.org/r/161850492435.7302.392780350442938047.stgit@brunhilda Fixes: 6702d2c40f31 ("scsi: smartpqi: Add support for RAID5 and RAID6 writes") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15Merge branch 'ehtool-fec-stats'David S. Miller
Jakub Kicinski says: ==================== ethtool: add standard FEC statistics This set adds uAPI for reporting standard FEC statistics, and implements it in a handful of drivers. The statistics are taken from the IEEE standard, with one extra seemingly popular but not standard statistics added. The implementation is similar to that of the pause frame statistics, user requests the stats by setting a bit (ETHTOOL_FLAG_STATS) in the common ethtool header of ETHTOOL_MSG_FEC_GET. Since standard defines the statistics per lane what's reported is both total and per-lane counters: # ethtool -I --show-fec eth0 FEC parameters for eth0: Configured FEC encodings: None Active FEC encoding: None Statistics: corrected_blocks: 256 Lane 0: 255 Lane 1: 1 uncorrectable_blocks: 145 Lane 0: 128 Lane 1: 17 v2: check for errors in mlx5 register access ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15mlx5: implement ethtool::get_fec_statsJakub Kicinski
Report corrected bits. v2: catch reg access errors (Saeed) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15sfc: ef10: implement ethtool::get_fec_statsJakub Kicinski
Report what appears to be the standard block counts: - 30.5.1.1.17 aFECCorrectedBlocks - 30.5.1.1.18 aFECUncorrectableBlocks Don't report the per-lane symbol counts, if those really count symbols they are not what the standard calls for (even if symbols seem like the most useful thing to count.) Fingers crossed that fec_corrected_errors is not in symbols. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15bnxt: implement ethtool::get_fec_statsJakub Kicinski
Report corrected bits. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ethtool: add FEC statisticsJakub Kicinski
Similarly to pause statistics add stats for FEC. The IEEE standard mandates two sets of counters: - 30.5.1.1.17 aFECCorrectedBlocks - 30.5.1.1.18 aFECUncorrectableBlocks where block is a block of bits FEC operates on. Each of these counters is defined per lane (PCS instance). Multiple vendors provide number of corrected _bits_ rather than/as well as blocks. This set adds the 2 standard-based block counters and a extra one for corrected bits. Counters are exposed to user space via netlink in new attributes. Each attribute carries an array of u64s, first element is the total count, and the following ones are a per-lane break down. Much like with pause stats the operation will not fail when driver does not implement the get_fec_stats callback (nor can the driver fail the operation by returning an error). If stats can't be reported the relevant attributes will be empty. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ethtool: fec_prepare_data() - jump to error handlingJakub Kicinski
Refactor fec_prepare_data() a little bit to skip the body of the function and exit on error. Currently the code depends on the fact that we only have one call which may fail between ethnl_ops_begin() and ethnl_ops_complete() and simply saves the error code. This will get hairy with the stats also being queried. No functional changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ethtool: move ethtool_stats_initJakub Kicinski
We'll need it for FEC stats as well. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15scm: optimize put_cmsg()Eric Dumazet
Calling two copy_to_user() for very small regions has very high overhead. Switch to inlined unsafe_put_user() to save one stac/clac sequence, and avoid copy_to_user(). Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15Merge branch 'ch_tlss-fixes'David S. Miller
Vinay Kumar Yadav says: ==================== chelsio/ch_ktls: chelsio inline tls driver bug fixes This series of patches fix following bugs in Chelsio inline tls driver. Patch1: kernel panic. Patch2: connection close issue. Patch3: tcb close call issue. Patch4: unnecessary snd_una update. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ch_ktls: do not send snd_una update to TCB in middleVinay Kumar Yadav
snd_una update should not be done when the same skb is being sent out.chcr_short_record_handler() sends it again even though SND_UNA update is already sent for the skb in chcr_ktls_xmit(), which causes mismatch in un-acked TCP seq number, later causes problem in sending out complete record. Fixes: 429765a149f1 ("chcr: handle partial end part of a record") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ch_ktls: tcb close causes tls connection failureVinay Kumar Yadav
HW doesn't need marking TCB closed. This TCB state change sometimes causes problem to the new connection which gets the same tid. Fixes: 34aba2c45024 ("cxgb4/chcr : Register to tls add and del callback") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ch_ktls: fix device connection closeVinay Kumar Yadav
When sge queue is full and chcr_ktls_xmit_wr_complete() returns failure, skb is not freed if it is not the last tls record in this skb, causes refcount never gets freed and tls_dev_del() never gets called on this connection. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ch_ktls: Fix kernel panicVinay Kumar Yadav
Taking page refcount is not ideal and causes kernel panic sometimes. It's better to take tx_ctx lock for the complete skb transmit, to avoid page cleanup if ACK received in middle. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15enetc: convert to schedule_work()Yangbo Lu
Convert system_wq queue_work() to schedule_work() which is a wrapper around it, since the former is a rare construct. Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: updates for -next This series adds support for pushing link status to VFs for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15net: hns3: VF not request link status when PF support push link status featureGuangbin Huang
To reduce the processing of unnecessary mailbox command when PF supports actively push its link status to VFs, VFs stop sending request link status command in periodic service task in this case. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15net: hns3: PF add support for pushing link status to VFsGuangbin Huang
Previously, VF updates its link status every second by send query command to PF in periodic service task. If link stats of PF is changed, VF may need at most one second to update its link status. To reduce delay of link status between PF and VFs, PF actively push its link status to VFs when its link status is updated. And to let VF know PF supports this new feature, the link status changed mailbox command adds one bit to indicate it. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15Merge branch 'bpf: tools: support build selftests/bpf with clang'Alexei Starovoitov
Yonghong Song says: ==================== To build kernel with clang, people typically use make -j60 LLVM=1 LLVM_IAS=1 LLVM_IAS=1 is not required for non-LTO build but is required for LTO build. In my environment, I am always having LLVM_IAS=1 regardless of whether LTO is enabled or not. After kernel is build with clang, the following command can be used to build selftests with clang: make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 I am using latest bpf-next kernel code base and latest clang built from source from https://github.com/llvm/llvm-project.git Using earlier version of llvm may have compilation errors, see tools/testing/selftests/bpf due to continuous development in llvm bpf features and selftests to use these features. To run bpf selftest properly, you need have certain necessary kernel configs like at: bpf-next:tools/testing/selftests/bpf/config (not that this is not a complete .config file and some other configs might still be needed.) Currently, using the above command, some compilations still use gcc and there are also compilation errors and warnings. This patch set intends to fix these issues. Patch #1 and #2 fixed the issue so clang/clang++ is used instead of gcc/g++. Patch #3 fixed a compilation failure. Patch #4 and #5 fixed various compiler warnings. Changelog: v2 -> v3: . more test environment description in cover letter. (Sedat) . use a different fix, but similar to other use in selftests/bpf Makefile, to exclude header files from CXX compilation command line. (Andrii) . fix codes instead of adding -Wno-format-security. (Andrii) v1 -> v2: . add -Wno-unused-command-line-argument and -Wno-format-security for clang only as (1). gcc does not exhibit those warnings, and (2). -Wno-unused-command-line-argument is only supported by clang. (Sedat) ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-04-15bpftool: Fix a clang compilation warningYonghong Song
With clang compiler: make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel # build selftests/bpf or bpftool make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 make -j60 -C tools/bpf/bpftool LLVM=1 LLVM_IAS=1 the following compilation warning showed up, net.c:160:37: warning: comparison of integers of different signs: '__u32' (aka 'unsigned int') and 'int' [-Wsign-compare] for (nh = (struct nlmsghdr *)buf; NLMSG_OK(nh, len); ^~~~~~~~~~~~~~~~~ .../tools/include/uapi/linux/netlink.h:99:24: note: expanded from macro 'NLMSG_OK' (nlh)->nlmsg_len <= (len)) ~~~~~~~~~~~~~~~~ ^ ~~~ In this particular case, "len" is defined as "int" and (nlh)->nlmsg_len is "unsigned int". The macro NLMSG_OK is defined as below in uapi/linux/netlink.h. #define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \ (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \ (nlh)->nlmsg_len <= (len)) The clang compiler complains the comparision "(nlh)->nlmsg_len <= (len))", but in bpftool/net.c, it is already ensured that "len > 0" must be true. So theoretically the compiler could deduce that comparison of "(nlh)->nlmsg_len" and "len" is okay, but this really depends on compiler internals. Let us add an explicit type conversion (from "int" to "unsigned int") for "len" in NLMSG_OK to silence this warning right now. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210413153435.3029635-1-yhs@fb.com
2021-04-15selftests/bpf: Silence clang compilation warningsYonghong Song
With clang compiler: make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 Some linker flags are not used/effective for some binaries and we have warnings like: warning: -lelf: 'linker' input unused [-Wunused-command-line-argument] We also have warnings like: .../selftests/bpf/prog_tests/ns_current_pid_tgid.c:74:57: note: treat the string as an argument to avoid this if (CHECK(waitpid(cpid, &wstatus, 0) == -1, "waitpid", strerror(errno))) ^ "%s", .../selftests/bpf/test_progs.h:129:35: note: expanded from macro 'CHECK' _CHECK(condition, tag, duration, format) ^ .../selftests/bpf/test_progs.h:108:21: note: expanded from macro '_CHECK' fprintf(stdout, ##format); \ ^ The first warning can be silenced with clang option -Wno-unused-command-line-argument. For the second warning, source codes are modified as suggested by the compiler to silence the warning. Since gcc does not support the option -Wno-unused-command-line-argument and the warning only happens with clang compiler, the option -Wno-unused-command-line-argument is enabled only when clang compiler is used. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210413153429.3029377-1-yhs@fb.com
2021-04-15selftests/bpf: Fix test_cpp compilation failure with clangYonghong Song
With clang compiler: make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 the test_cpp build failed due to the failure: warning: treating 'c-header' input as 'c++-header' when in C++ mode, this behavior is deprecated [-Wdeprecated] clang-13: error: cannot specify -o when generating multiple output files test_cpp compilation flag looks like: clang++ -g -Og -rdynamic -Wall -I<...> ... \ -Dbpf_prog_load=bpf_prog_test_load -Dbpf_load_program=bpf_test_load_program \ test_cpp.cpp <...>/test_core_extern.skel.h <...>/libbpf.a <...>/test_stub.o \ -lcap -lelf -lz -lrt -lpthread -o <...>/test_cpp The clang++ compiler complains the header file in the command line and also failed the compilation due to this. Let us remove the header file from the command line which is not intended any way, and this fixed the compilation problem. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210413153424.3028986-1-yhs@fb.com
2021-04-15tools: Allow proper CC/CXX/... override with LLVM=1 in Makefile.includeYonghong Song
selftests/bpf/Makefile includes tools/scripts/Makefile.include. With the following command make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1 some files are still compiled with gcc. This patch fixed the case if CC/AR/LD/CXX/STRIP is allowed to be overridden, it will be written to clang/llvm-ar/..., instead of gcc binaries. The definition of CC_NO_CLANG is also relocated to the place after the above CC is defined. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210413153419.3028165-1-yhs@fb.com
2021-04-15selftests: Set CC to clang in lib.mk if LLVM is setYonghong Song
selftests/bpf/Makefile includes lib.mk. With the following command make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1 some files are still compiled with gcc. This patch fixed lib.mk issue which sets CC to gcc in all cases. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com
2021-04-15net: phy: at803x: select correct page on config initDavid Bauer
The Atheros AR8031 and AR8033 expose different registers for SGMII/Fiber as well as the copper side of the PHY depending on the BT_BX_REG_SEL bit in the chip configure register. The driver assumes the copper side is selected on probe, but this might not be the case depending which page was last selected by the bootloader. Notably, Ubiquiti UniFi bootloaders show this behavior. Select the copper page when probing to circumvent this. Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-04-14 This series contains updates to ice driver only. Bruce changes and removes open coded values to instead use existing kernel defines and suppresses false cppcheck issues. Ani adds new VSI states to track netdev allocation and registration. He also removes leading underscores in the ice_pf_state enum. Jesse refactors ITR by introducing helpers to reduce duplicated code and structures to simplify checking of ITR mode. He also triggers a software interrupt when exiting napi poll or busy-poll to ensure all work is processed. Modifies /proc/iomem to display driver name instead of PCI address. He also changes the checks of vsi->type to use a local variable in ice_vsi_rebuild() and removes an unneeded struct member. Jake replaces the driver's adaptive interrupt moderation algorithm to use the kernel's DIM library implementation. Scott reworks module reads to reduce the number of reads needed and remove excessive increment of QSFP page. Brett sets the vsi->vf_id to invalid for non-VF VSIs. Paul removes the return value from ice_vsi_manage_rss_lut() as it's not communicating anything critical. He also reduces the scope of a variable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15Merge tag 'mlx5-fixes-2021-04-14' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-04-14 This series provides 3 small fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15libbpf: Remove unused field.Alexei Starovoitov
relo->processed is set, but not used. Remove it. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210415141817.53136-1-alexei.starovoitov@gmail.com
2021-04-16HSI: core: fix resource leaks in hsi_add_client_from_dt()Dan Carpenter
If some of the allocations fail between the dev_set_name() and the device_register() then the name will not be freed. Fix this by moving dev_set_name() directly in front of the call to device_register(). Fixes: a2aa24734d9d ("HSI: Add common DT binding for HSI client devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-04-15docs: sphinx-pre-install: don't barf on beta Sphinx releasesJonathan Corbet
sphinx-pre-install is picky when it comes to parsing sphinx versions; it failed when run with sphinx 4.0.0b1. Tweak the regex to tolerate a trailing "bN" on the version number. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-15MIPS: Fix strnlen_user access checkThomas Bogendoerfer
Commit 04324f44cb69 ("MIPS: Remove get_fs/set_fs") changed the access_ok for strnlen_user to check the whole range, which broke some callers of strndup_user(). Restore the old behaviour and just check the first byte. Fixes: 04324f44cb69 ("MIPS: Remove get_fs/set_fs") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-15i40e: fix the panic when running bpf in xdpdrv modeJason Xing
Fix this panic by adding more rules to calculate the value of @rss_size_max which could be used in allocating the queues when bpf is loaded, which, however, could cause the failure and then trigger the NULL pointer of vsi->rx_rings. Prio to this fix, the machine doesn't care about how many cpus are online and then allocates 256 queues on the machine with 32 cpus online actually. Once the load of bpf begins, the log will go like this "failed to get tracking for 256 queues for VSI 0 err -12" and this "setup of MAIN VSI failed". Thus, I attach the key information of the crash-log here. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 0010:i40e_xdp+0xdd/0x1b0 [i40e] Call Trace: [2160294.717292] ? i40e_reconfig_rss_queues+0x170/0x170 [i40e] [2160294.717666] dev_xdp_install+0x4f/0x70 [2160294.718036] dev_change_xdp_fd+0x11f/0x230 [2160294.718380] ? dev_disable_lro+0xe0/0xe0 [2160294.718705] do_setlink+0xac7/0xe70 [2160294.719035] ? __nla_parse+0xed/0x120 [2160294.719365] rtnl_newlink+0x73b/0x860 Fixes: 41c445ff0f48 ("i40e: main driver core") Co-developed-by: Shujin Li <lishujin@kuaishou.com> Signed-off-by: Shujin Li <lishujin@kuaishou.com> Signed-off-by: Jason Xing <xingwanli@kuaishou.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15scripts: kernel-doc: improve parsing for kernel-doc comments syntaxAditya Srivastava
Currently kernel-doc does not identify some cases of probable kernel doc comments, for e.g. pointer used as declaration type for identifier, space separated identifier, etc. Some example of these cases in files can be: i)" * journal_t * jbd2_journal_init_dev() - creates and initialises a journal structure" in fs/jbd2/journal.c ii) "* dget, dget_dlock - get a reference to a dentry" in include/linux/dcache.h iii) " * DEFINE_SEQLOCK(sl) - Define a statically allocated seqlock_t" in include/linux/seqlock.h Also improve identification for non-kerneldoc comments. For e.g., i) " * The following functions allow us to read data using a swap map" in kernel/power/swap.c does follow the kernel-doc like syntax, but the content inside does not adheres to the expected format. Improve parsing by adding support for these probable attempts to write kernel-doc comment. Suggested-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/lkml/87mtujktl2.fsf@meer.lwn.net Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Link: https://lore.kernel.org/r/20210414192529.9080-1-yashsri421@gmail.com [ jc: fixed some line-length issues ] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-15docs/zh_CN: two minor fixes in zh_CN/doc-guide/Wu XiangCheng
zh_CN/doc-guide/kernel-doc.rst replace a ref tag to solve docs-next warning zh_CN/doc-guide/parse-headers.rst fix an unperfect word Signed-off-by: Wu XiangCheng <bobwxc@email.cn> Link: https://lore.kernel.org/r/20210414033435.GA27907@bobwxc.top Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-15Documentation: dev-tools: Add Testing OverviewDavid Gow
The kernel now has a number of testing and debugging tools, and we've seen a bit of confusion about what the differences between them are. Add a basic documentation outlining the testing tools, when to use each, and how they interact. This is a pretty quick overview rather than the idealised "kernel testing guide" that'd probably be optimal, but given the number of times questions like "When do you use KUnit and when do you use Kselftest?" are being asked, it seemed worth at least having something. Hopefully this can form the basis for more detailed documentation later. Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Link: https://lore.kernel.org/r/20210415054036.581117-1-davidgow@google.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-15docs/zh_CN: add translations in zh_CN/dev-tools/gcovBernard Zhao
Add new zh translations * zh_CN/dev-tools/gcov.rst * zh_CN/dev-tools/index.rst and link them to zh_CN/index.rst Signed-off-by: Bernard Zhao <bernard@vivo.com> Reviewed-by: Wu XiangCheng <bobwxc@email.cn> Reviewed-by: Alex Shi <alexs@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Signed-off-by: Wu XiangCheng <bobwxc@email.cn> Link: https://lore.kernel.org/r/20210415054304.GA26689@bobwxc.top Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-15i2c: mv64xxx: Fix random system lock caused by runtime PMMarek Behún
I noticed a weird bug with this driver on Marvell CN9130 Customer Reference Board. Sometime after boot, the system locks with the following message: [104.071363] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 The system does not respond afterwards, only warns about RCU stalls. This first appeared with commit e5c02cf54154 ("i2c: mv64xxx: Add runtime PM support"). With further experimentation I discovered that adding a delay into mv64xxx_i2c_hw_init() fixes this issue. This function is called before every xfer, due to how runtime PM works in this driver. It seems that in order to work correctly, a delay is needed after the bus is reset in this function. Since there already is a known erratum with this controller needing a delay, I assume that this is just another place this needs to be applied. Therefore I apply the delay only if errata_delay is true. Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15Merge tag 'nand/for-5.13' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next MTD core: * Handle possible -EPROBE_DEFER from parse_mtd_partitions() NAND core: * Fix error handling in nand_prog_page_op() (x2) * Add a helper to retrieve the number of ECC bytes per step * Add a helper to retrieve the number of ECC steps * Let ECC engines advertize the exact number of steps * ECC Hamming: - Populate the public nsteps field - Use the public nsteps field * ECC BCH: - Populate the public nsteps field - Use the public nsteps field Raw NAND core: * Add support for secure regions in NAND memory * Try not to use the ECC private structures * Remove duplicate include in rawnand.h * BBT: - Skip bad blocks when searching for the BBT in NAND Raw NAND controller drivers: * Qcom: - Convert bindings to YAML - Use dma_mapping_error() for error check - Add missing nand_cleanup() in error path - Return actual error code instead of -ENODEV - Update last code word register - Add helper to configure location register - Rename parameter name in macro - Add helper to check last code word - Convert nandc to chip in Read/Write helper - Update register macro name for 0x2c offset * GPMI: - Fix a double free in gpmi_nand_init * Rockchip: - Use flexible-array member instead of zero-length array * Atmel: - Update ecc_stats.corrected counter * MXC: - Remove unneeded of_match_ptr() * R852: - replace spin_lock_irqsave by spin_lock in hard IRQ * Brcmnand: - Move to polling in pio mode on oops write - Read/write oob during EDU transfer - Fix OOB R/W with Hamming ECC * FSMC: - Fix error code in fsmc_nand_probe() * OMAP: - Use ECC information from the generic structures SPI-NAND core: * Add missing MODULE_DEVICE_TABLE() SPI-NAND drivers: * gigadevice: Support GD5F1GQ5UExxG
2021-04-15Merge tag 'spi-nor/for-5.13' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - Add OTP support - Fix module unload while an op in progress - Add various cleanup patches SPI NOR controller drivers changes: - intel-spi: Move platform data header to x86 subfolder
2021-04-15Merge tag 'cfi/for-5.13' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next CFI changes Just a couple of fixes for v5.13-rc1 * Disable broken buffered writes for CFI chips within ID 0x2201 * Address a Coverity report for unused value
generated by cgit (git 2.34.1) at 2025-09-20 17:02:24 +0000