Age | Commit message (Collapse) | Author |
|
Nobody uses that in the user space.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.b6560a5de0cd.I5dac9c60faed7f48b06d352aa2d65bcf8142c2dc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Debug message "firmware didn't ACK the reset - continue anyway\n"
in fw_reset_handshake() is classified as error, however this is not
an error as it is ignored. So, change it to info message for proper
classification of debug messages.
Signed-off-by: Ravi Darsi <ravi.darsi@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.449b3092c330.I515edcc41913ca7fbe4a4de923671d120d5618c6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Instead of implementing the DSM evaluation function in the MVM code,
refactor it so it can be generalized and part of the common ACPI
implementation.
Signed-off-by: Harish Mitty <harish.mitty@intel.com>
[reworded subject and commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.a24af3551aac.I8e6bd5eb05f853b6331fa4823750f7ba8ffe46e6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Read the new BIOS DSM and Pass to FW if to disable\enable
11ax for Ukraine according to the BIOS key. this is
needed to enable OEMs to control enable/disable 11ax in Ukraine
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.055654e7707e.If7eaf9839cd5d59729a235df07e31668b408e740@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
All the op_modes need to send this command as well. Instead of
duplicating the code from mvm, put the code in a common place.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.deb71fce883a.I5eef009512f180e5974f3f491ff56c763cdcc878@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
add new so-gf device to the driver.
Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d6b0c1f85a7e.I2098ca066607edc48336021ea2e5afdbf8196acf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Add support for ppag in China by reading revision 2 of the ppag table
from ACPI, and passing the data to the FW.
This is needed to enable OEMs to control ppag enablement
in China.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.69af388d0dce.I8cfddf9e6837bf394b00390181b4b774ded19acd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When doing scan while 6GHz channels are not enabled, the 6GHz band
is not scanned. Thus, if there are no APs on the 2GHz and 5GHz bands
(that will allow discovery of geographic location etc. that would
allow enabling the 6GHz channels) but there are non collocated APs
on 6GHz PSC channels these would never be discovered.
To overcome this, FW added support for performing passive UHB scan
in case no APs were discovered during scan on the 2GHz and 5GHz
channels.
Add support for enabling such scan when the following conditions are
met:
- 6GHz channels are supported but not enabled by regulatory.
- Station interface is not associated or less than a defined time
interval passed from the last resume or HW reset flows.
- At least 4 channels are included in the scan request
- The scan request includes the widlcard SSID.
- At least 50 minutes passed from the last 6GHz passive scan.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.7c7bd00e0aeb.Ib226ad57e416b43a710c36a78a617d4243458b99@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
add new killer devices configurations.
Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.54967363d26d.I5d1a3d810cf6abace51ebb2630d62d891e9fd302@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When associated to the resonder with PMF, request to protect the NDP
ranging negotiation with PMF.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.e7982c72e12b.Ib6db362d01a31132c638e194d49476cd8e3ff430@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When we do queue sync, it's confusing that we have the structures
declared in the FW API header files that aren't really firmware,
and the union is also confusing - especially now in the code that
checks the size on the return.
So rework this: change the type of sync and whether to do it in a
synchronous fashion to arguments, and build the data structure in
the function, so we don't need the union.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.f62833fd9893.I612d7ac1c655ec4880329360e15d207698c750bc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
We use mvm->queue_sync_state to wait for synchronous queue sync
messages, but if an async one happens inbetween we shouldn't
clear mvm->queue_sync_state after sending the async one, that
can run concurrently (at least from the CPU POV) with another
synchronous queue sync.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d11c9bcdb4aa.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Version 8 add NDP ranging parameters configuration, as well as
enable/disable NDP ranging and LMR feedback.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.ce9570d755d3.Ic81cb8da9aecbbc9edff468cb4ffbb741418cc73@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Version 12 adds configuration of NDP ranging parameters:
- max number of LTF repetitions
- max number of spatial streams
- max total LTFs
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.2c30c376c5cf.I01460f7277594ee7c98a8e1fe5447c59e70bf073@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
If we (for example) have a trans_cfg entry in the PCI IDs table,
but then don't find a full cfg entry for it in the info table,
we fall through to the code that treats the PCI ID table entry
as a full cfg entry. This obviously causes crashes later, e.g.
when trying to build the firmware name string.
Avoid such crashes by using the low bit of the pointer as a tag
for trans_cfg entries (automatically using a macro that checks
the type when assigning) and then checking that before trying to
use the data as a full entry - if it's just a partial entry at
that point, fail.
Since we're adding some macro magic, also check that the type is
in fact either struct iwl_cfg_trans_params or struct iwl_cfg,
failing compilation ("initializer element is not constant") if
it isn't.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.6f69fe6e4128.I921d4ae20ef5276716baeeeda0b001cf25b9b968@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
For simplicity we assume that msix has 2 IRQ lines one used for rx data
called msix_non_share, and another used for one bit flags messages
(alive, hw error, sw error, rx data flag) called msix_share.
Every time the FW has data to send it puts it on the RX queue and HW
turns on the flags in msix_share (inta_fw) indicating about rx data,
and HW sends an interrupt a bit later to the msix_non_share _unless_
the msix_shared RX data bit was cleared.
Currently in the code every time we get an msix_shared we clear all bits
including rx data queue bits.
So we can have a race
----------------------------------------------------
DRIVER | HW | FW
----------------------------------------------------
- send host cmd to FW | |
| | - handle message
| | and put a response
| | on the RX queue
| - RX flag on |
| | - send alive msix
| - alive flag on |
| - interrupt |
| msix_share driver |
- handle msix_shared | |
and clear all flags | |
bits | |
| - don't send an |
| interrupt on |
| msix_non_shared |
| (driver cleared) |
- driver timeout on | |
waiting for host cmd | |
respond | |
| |
----------------------------------------------------
The change is to clear only the msi_shared flags that are handled in
the msix_shared flow, which will cause the hardware to send an interrupt
on the msix_non_share line as well, when it has data.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.a1cdda2fa270.I02a82312679f4541f30bb8db8747a797dbb70ee7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
change the name of 1550 killer device to 160Mhz.
Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.b87618a26ff8.Icf1d9c150ec108f30ce0e72c18b9350da6ae5087@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
change the name of the ax211 and ax411.
Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.fc3218805052.I203f1a802338f59955bd511c90217f63b918390b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
change the step of iwlax210_2ax_cfg_so_jf_a0 to
iwlax210_2ax_cfg_so_jf_b0 as it is on the wcd_fw-dev
repository.
Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.e9a9d1da76bc.Ie964f37872bbb88d1a02094134f9a2c38faad884@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Add support for different combinations of Bz
and CRFs.
Note: As of now we do not know the exact values
for ltr_delay and xtal_latency, so for now use the
worst case scenario values until the actual values
are clarified.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.caac8d996532.I6a22d6decb106cd50d7954b19236b69d685dcc39@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
"Fully associated" means that we heard a beacon with the DTIM
information and the firmware is configured to track the beacons.
Since the firmware needs to track the beacons for the CSA, we
can't configure the firmware for CSA before it knows when the
beacons are expected otherwise we'd get ASSERT 301D.
If we are required to start CSA before we told the firmware
when the beacons are expected to arrive, just report a
failure and let mac80211 disconnect.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.9adaedeb59e4.Idaad6aaf3f9759d023b8e00b10064915c0db9aa3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
We currently have a special, separate, code path to acquire NIC
access for the in-flight host-command workaround on 7000 series
hardware. However, the normal code path here has grown a number
of additional workarounds/semantics over time, such as reprobing
the device if things fail.
Rather than try to replicate any of this logic, call the normal
grab_nic_access logic for the workaround.
This changes the spinlock to _bh, but that's OK since it's just
redundant, we already have soft-IRQs disabled when we get here,
and so didn't (have to) do it again. Since it's only for commands
there's however no point in making the code more complex just to
not use _bh here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.d196fc6ffb23.Idc1ce3ce9fed9178beee7e5409bc669f79b06a0d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Most devices don't set the apmg_wake_up_wa flag, so we don't do
anything for them. Avoid taking the spinlock for every command
unless the device needs this workaround.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.1ab60af3f318.I51cc202f68a2a953223e70c3e8610343412961b6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When moving to the new channel, we block TX until we hear the
first beacon. if it is not heard, we proceed to disconnect.
Since TX is blocked (without mac80211 being aware of it) the frame
is stuck, resulting with queue hang.
Instead, reenable TX before reporting on the connection loss.
As we are on the new channel, there is no problem with that,
even if the original CSA had quiet mode.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.eb4f2ff1b863.Ib16238106b33d58b2b7688dc6297018b915ecef4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
fix indentation of last line in if condition.
Fixes: af6afdb63f17 (staging: rtl8723bs: split long lines)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/20210414081739.2990-1-fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed multiple blank lines to make code better and neater.
Reported by checkpatch.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Link: https://lore.kernel.org/r/2bfe551f152a611cc49a71a4984f41ef7ee69df5.1618380932.git.mitaliborkar810@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed an extra blank line after close brace '{' as it was not
necessary.
Reported by checkpatch
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Link: https://lore.kernel.org/r/40f72a84750f402c342b4685e0a2f15d27875c9a.1618380932.git.mitaliborkar810@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed an extra blank line before close brace as it was not necessary.
Reported by checkpatch.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Link: https://lore.kernel.org/r/cad6a7885f30dcfabaf1ccab1fd0644416fea194.1618380932.git.mitaliborkar810@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added spaces around binary operators like '+', '*', '|', '-', '&',
to improve readability and to meet linux kernel coding style.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Link: https://lore.kernel.org/r/28cbc4825fdfacf5d5ea8bb688a8bd6a1c65f059.1618380932.git.mitaliborkar810@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed four variables that were set but not used.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210414061346.11423-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove dump_drv_version() and dump_log_level() function
definitions and prototypes. Those functions are unused,
and add unnecessary wrap level to log calls.
They wrap DBG_871X_SEL_NL which will be replaced by
netdev_dbg() with coccinelle script application.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/2e8dd88c053735daed95701140b2f03b4cfe2a2e.1618325614.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove unnecessary dump_drv_version() usage.
This prepares dump_drv_version() for removal, before
coccinelle script application.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/9ce6559cac69eaebfdb07206921d14e99d2b1967.1618325614.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
replace dump_drv_version() usage with netdev_dbg().
There's no need to further wrap a netdev_dbg() call
for such a low number of occurrences.
The string printed is the same contained in DBG_871X_SEL_NL macro
called inside dump_drv_version().
This is just preparation before bulk DBG_871X_SEL_NL macro
replacement by coccinelle, as the semantic patch that will be
used just replaces, doesn't remove.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/a4df375dba6c004a22cf197ff8d498d0e4f3b52e.1618325614.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed "ledBlink_param" because it was set to the value of "pbuf" but was
never reused. This set was made by direct assignment (no helper had been
called), therefore it had no side effect to the location pointed by "pbuf".
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210413150517.12533-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Moved "static const struct channel_table[]" from include/rtw_mlme_ext.h
to core/rtw_ioctl_set.c because the latter is the only file that uses
that array of struct(s) in the whole driver. "make rtl8188eu/ W=1" output
several warnings about "'channel_table' defined but not used
[-Wunused-const-variable=]".
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210413102033.24781-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed checkpatch.pl warning:
CHECK: Blank lines aren't necessary before a close brace '}'
+
+ }
Signed-off-by: Mikko Talikka <mikko.talikka@live.com>
Link: https://lore.kernel.org/r/AM0PR01MB42597C4CAA1B9E51D4AE3D5E974F9@AM0PR01MB4259.eurprd01.prod.exchangelabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During the handling of CAN bus errors, a CAN error SKB is allocated
using alloc_can_err_skb(). Even if the allocation of the SKB fails,
the function continues in order to do the stats handling.
All access to the can_frame pointer (cf) should be guarded by an if
statement:
if (cf)
However, the increment of the rx_bytes stats:
netdev->stats.rx_bytes += cf->can_dlc;
dereferences the cf pointer and was not guarded by an if condition
leading to a NULL pointer dereference if the can_err_skb() function
failed.
Replacing the cf->can_dlc by the macro CAN_ERR_DLC (which is the
length of any CAN error frames) solves this NULL pointer dereference.
Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Link: https://lore.kernel.org/r/20210413114242.2760-1-mailhol.vincent@wanadoo.fr
Reported-by: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.12-4
* Fix pin numbering per community in Intel Lewisburg driver
The following is an automated git shortlog grouped by driver:
lewisburg:
- Update number of pins in community
|
|
Those are already provided by linux/io.h as stubs.
The conflict remains invisible until someone would pull linux/io.h into
memtype.c. This fixes a build error when this file is used outside of
the kernel tree.
[ bp: Massage commit message. ]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/a9351615-7a0d-9d47-af65-d9e2fffe8192@siemens.com
|
|
Commit
a799c2bd29d1 ("x86/setup: Consolidate early memory reservations")
moved reservation of the memory inaccessible by Sandy Bride integrated
graphics very early, and, as a result, on systems with such devices
the first 1M was reserved by trim_snb_memory() which prevented the
allocation of the real mode trampoline and made the boot hang very
early.
Since the purpose of trim_snb_memory() is to prevent problematic pages
ever reaching the graphics device, it is safe to reserve these pages
after memblock allocations are possible.
Move trim_snb_memory() later in boot so that it will be called after
reserve_real_mode() and make comments describing trim_snb_memory()
operation more elaborate.
[ bp: Massage a bit. ]
Fixes: a799c2bd29d1 ("x86/setup: Consolidate early memory reservations")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Hugh Dickins <hughd@google.com>
Link: https://lkml.kernel.org/r/f67d3e03-af90-f790-baf4-8d412fe055af@infradead.org
|
|
Add IPA-related nodes and definitions to "sdx55.dtsi". The SMP2P
nodes (ipa_smp2p_out and ipa_smp2p_in) are already present.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210409155251.955632-1-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Not all platforms are able to allocate CMA size of 256MB. One such
platform is SDX55. Hence, use the standard 64MB size for CMA.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enable the Qualcomm GLINK SMEM driver to support GLINK protocol over
shared memory.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enable interconnect driver for SDX55 platform to manage the interconnect
providers.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enable the Qualcomm Q6V5_PAS (Peripheral Authentication Service)
remoteproc driver to manage the modem co-processor in SDX55 platform.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enable CPUFreq and CPUFreq DT drivers to carry out CPU Frequency scaling
duties on platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enable A7 PLL driver and APCS clock driver on SDX55 platform.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enable Qualcomm APCS IPC mailbox driver for IPC communication between
application processor and other masters in platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Thundercomm T55 is the development platform based on the Qualcomm SDX55
chipset. This basic support includes support for debug serial, NAND
flash, BAM DMA, USB and regulators support.
https://www.thundercomm.com/app_en/product/1593506006365532
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170457.91409-14-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add devicetree binding for Thundercomm T55 Dev kit based on SDX55.
Acked-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170457.91409-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|