summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-23Merge branch 'r8152-adjust-REALTEK_USB_DEVICE'David S. Miller
Hayes Wang says: ==================== r8152: adjust REALTEK_USB_DEVICE Modify REALTEK_USB_DEVICE macro. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23r8152: redefine REALTEK_USB_DEVICE macroHayes Wang
Redefine REALTEK_USB_DEVICE macro with USB_DEVICE_INTERFACE_CLASS and USB_DEVICE_AND_INTERFACE_INFO to simply the code. Although checkpatch.pl shows the following error, it is more readable. ERROR: Macros with complex values should be enclosed in parentheses Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23r8152: remove NCM mode from REALTEK_USB_DEVICE macroHayes Wang
The RTL8156 support CDC NCM mode. And users could set the configuration of the USB device between vendor and NCM mode dynamically by themselves. That is, the driver doesn't need to set vendor mode from NCM mode. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23enetc: fix locking for one-step timestamping packet transferYangbo Lu
The previous patch to support PTP Sync packet one-step timestamping described one-step timestamping packet handling logic as below in commit message: - Trasmit packet immediately if no other one in transfer, or queue to skb queue if there is already one in transfer. The test_and_set_bit_lock() is used here to lock and check state. - Start a work when complete transfer on hardware, to release the bit lock and to send one skb in skb queue if has. There was not problem of the description, but there was a mistake in implementation. The locking/test_and_set_bit_lock() should be put in enetc_start_xmit() which may be called by worker, rather than in enetc_xmit(). Otherwise, the worker calling enetc_start_xmit() after bit lock released is not able to lock again for transfer. Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2021-04-23 1) The SPI flow key in struct flowi has no consumers, so remove it. From Florian Westphal. 2) Remove stray synchronize_rcu from xfrm_init. From Florian Westphal. 3) Use the new exit_pre hook to reset the netlink socket on net namespace destruction. From Florian Westphal. 4) Remove an unnecessary get_cpu() in ipcomp, that code is always called with BHs off. From Sabrina Dubroca. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23Merge branch 'mk_eth_soc_fixes-perf-improvements'David S. Miller
Ilya Lipnitskiy says: ==================== mtk_eth_soc: fixes and performance improvements Most of these changes come from OpenWrt where they have been present and tested for months. First three patches are bug fixes. The rest are performance improvements. The last patch is a cleanup to use the iopoll.h macro for busy-waiting instead of a custom loop. v2: - Reverse christmas tree in "use iopoll.h macro for DMA init" - Use cond_resched() instead of iopoll.h macro in "reduce MDIO bus access latency" - Use napi_complete_done and rework NAPI callbacks in a new patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: use iopoll.h macro for DMA initIlya Lipnitskiy
Replace a tight busy-wait loop without a pause with a standard readx_poll_timeout_atomic routine with a 5 us poll period. Tested by booting a MT7621 device to ensure the driver initializes properly. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: set PPE flow hash as skb hash if presentFelix Fietkau
This improves GRO performance Signed-off-by: Felix Fietkau <nbd@nbd.name> [Ilya: Use MTK_RXD4_FOE_ENTRY instead of GENMASK(13, 0)] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: rework NAPI callbacksIlya Lipnitskiy
Use napi_complete_done to communicate total TX and RX work done to NAPI. Count total RX work up instead of remaining work down for clarity. Remove unneeded local variables for clarity. Use do {} while instead of goto for clarity. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: reduce unnecessary interruptsFelix Fietkau
Avoid rearming interrupt if napi_complete returns false Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: only read the full RX descriptor if DMA is doneFelix Fietkau
Uncached memory access is expensive, and there is no need to access all descriptor words if we can't process them anyway Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: cache HW pointer of last freed TX descriptorFelix Fietkau
The value is only updated by the CPU, so it is cheaper to access from the ring data structure than from a hardware register. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: implement dynamic interrupt moderationFelix Fietkau
Reduces the number of interrupts under load Signed-off-by: Felix Fietkau <nbd@nbd.name> [Ilya: add documentation for new struct fields] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: increase DMA ring sizesFelix Fietkau
256 descriptors is not enough for multi-gigabit traffic under load on MT7622. Bump it to 512 to improve performance. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: use larger burst size for QDMA TXFelix Fietkau
Improves tx performance Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: remove unnecessary TX queue stopsFelix Fietkau
When running short on descriptors, only stop the queue for the netdev that tx was attempted for. By the time something tries to send on the other netdev, the ring might have some more room already. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: reduce MDIO bus access latencyFelix Fietkau
usleep_range often ends up sleeping much longer than the 10-20us provided as a range here. This causes significant latency in mdio bus acceses, which easily adds multiple seconds to the boot time on MT7621 when polling DSA slave ports. Use cond_resched instead of usleep_range, since the MDIO access does not take much time Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: use napi_consume_skbFelix Fietkau
Should improve performance, since it can use bulk free Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: fix build_skb cleanupIlya Lipnitskiy
In case build_skb fails, call skb_free_frag on the correct pointer. Also update the DMA structures with the new mapping before exiting, because the mapping was successful Suggested-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: unmap RX data before calling build_skbFelix Fietkau
Since build_skb accesses the data area (for initializing shinfo), dma unmap needs to happen before that call Signed-off-by: Felix Fietkau <nbd@nbd.name> [Ilya: split build_skb cleanup fix into a separate commit] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: fix RX VLAN offloadFelix Fietkau
The VLAN ID in the rx descriptor is only valid if the RX_DMA_VTAG bit is set. Fixes frames wrongly marked with VLAN tags. Signed-off-by: Felix Fietkau <nbd@nbd.name> [Ilya: fix commit message] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skbPhillip Potter
Modify the header size check in geneve6_xmit_skb and geneve_xmit_skb to use pskb_inet_may_pull rather than pskb_network_may_pull. This fixes two kernel selftest failures introduced by the commit introducing the checks: IPv4 over geneve6: PMTU exceptions IPv4 over geneve6: PMTU exceptions - nexthop objects It does this by correctly accounting for the fact that IPv4 packets may transit over geneve IPv6 tunnels (and vice versa), and still fixes the uninit-value bug fixed by the original commit. Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: 6628ddfec758 ("net: geneve: check skb is large enough for IPv4/IPv6 header") Suggested-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: mana: Use int to check the return value of mana_gd_poll_cq()Dexuan Cui
mana_gd_poll_cq() may return -1 if an overflow error is detected (this should never happen unless there is a bug in the driver or the hardware). Fix the type of the variable "comp_read" by using int rather than u32. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23virtio-net: fix use-after-free in skb_gro_receiveXuan Zhuo
When "headroom" > 0, the actual allocated memory space is the entire page, so the address of the page should be used when passing it to build_skb(). BUG: KASAN: use-after-free in skb_gro_receive (net/core/skbuff.c:4260) Write of size 16 at addr ffff88811619fffc by task kworker/u9:0/534 CPU: 2 PID: 534 Comm: kworker/u9:0 Not tainted 5.12.0-rc7-custom-16372-gb150be05b806 #3382 Hardware name: QEMU MSN2700, BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: xprtiod xs_stream_data_receive_workfn [sunrpc] Call Trace: <IRQ> dump_stack (lib/dump_stack.c:122) print_address_description.constprop.0 (mm/kasan/report.c:233) kasan_report.cold (mm/kasan/report.c:400 mm/kasan/report.c:416) skb_gro_receive (net/core/skbuff.c:4260) tcp_gro_receive (net/ipv4/tcp_offload.c:266 (discriminator 1)) tcp4_gro_receive (net/ipv4/tcp_offload.c:316) inet_gro_receive (net/ipv4/af_inet.c:1545 (discriminator 2)) dev_gro_receive (net/core/dev.c:6075) napi_gro_receive (net/core/dev.c:6168 net/core/dev.c:6198) receive_buf (drivers/net/virtio_net.c:1151) virtio_net virtnet_poll (drivers/net/virtio_net.c:1415 drivers/net/virtio_net.c:1519) virtio_net __napi_poll (net/core/dev.c:6964) net_rx_action (net/core/dev.c:7033 net/core/dev.c:7118) __do_softirq (./arch/x86/include/asm/jump_label.h:25 ./include/linux/jump_label.h:200 ./include/trace/events/irq.h:142 kernel/softirq.c:346) irq_exit_rcu (kernel/softirq.c:221 kernel/softirq.c:422 kernel/softirq.c:434) common_interrupt (arch/x86/kernel/irq.c:240 (discriminator 14)) </IRQ> Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reported-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: sock: remove the unnecessary check in proto_registerTonghao Zhang
tw_prot_cleanup will check the twsk_prot. Fixes: 0f5907af3913 ("net: Fix potential memory leak in proto_register()") Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23openvswitch: meter: remove rate from the bucket size calculationIlya Maximets
Implementation of meters supposed to be a classic token bucket with 2 typical parameters: rate and burst size. Burst size in this schema is the maximum number of bytes/packets that could pass without being rate limited. Recent changes to userspace datapath made meter implementation to be in line with the kernel one, and this uncovered several issues. The main problem is that maximum bucket size for unknown reason accounts not only burst size, but also the numerical value of rate. This creates a lot of confusion around behavior of meters. For example, if rate is configured as 1000 pps and burst size set to 1, this should mean that meter will tolerate bursts of 1 packet at most, i.e. not a single packet above the rate should pass the meter. However, current implementation calculates maximum bucket size as (rate + burst size), so the effective bucket size will be 1001. This means that first 1000 packets will not be rate limited and average rate might be twice as high as the configured rate. This also makes it practically impossible to configure meter that will have burst size lower than the rate, which might be a desirable configuration if the rate is high. Inability to configure low values of a burst size and overall inability for a user to predict what will be a maximum and average rate from the configured parameters of a meter without looking at the OVS and kernel code might be also classified as a security issue, because drop meters are frequently used as a way of protection from DoS attacks. This change removes rate from the calculation of a bucket size, making it in line with the classic token bucket algorithm and essentially making the rate and burst tolerance being predictable from a users' perspective. Same change proposed for the userspace implementation. Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23Merge tag 'arm-fixes-5.12-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These should be the final fixes for v5.12. There is one fix for SD card detection on one Allwinner board, and a few fixes for the Tegra platform that I had already queued up for v5.13 due to a communication problem. This addresses MMC device ordering on multiple machines, audio support on Jetson AGX Xavier and suspend/resume on Jetson TX2" * tag 'arm-fixes-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS arm64: tegra: Move clocks from RT5658 endpoint to device node arm64: tegra: Fix mmc0 alias for Jetson Xavier NX arm64: tegra: Set fw_devlink=on for Jetson TX2 arm64: tegra: Add unit-address for ACONNECT on Tegra186
2021-04-23perf map: Fix error return code in maps__clone()Zhen Lei
Although 'err' has been initialized to -ENOMEM, but it will be reassigned by the "err = unwind__prepare_access(...)" statement in the for loop. So that, the value of 'err' is unknown when map__clone() failed. Fixes: 6c502584438bda63 ("perf unwind: Call unwind__prepare_access for forked thread") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: zhen lei <thunder.leizhen@huawei.com> Link: http://lore.kernel.org/lkml/20210415092744.3793-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-23perf ftrace: Fix access to pid in array when setting a pid filterThomas Richter
Command 'perf ftrace -v -- ls' fails in s390 (at least 5.12.0rc6). The root cause is a missing pointer dereference which causes an array element address to be used as PID. Fix this by extracting the PID. Output before: # ./perf ftrace -v -- ls function_graph tracer is used write '-263732416' to tracing/set_ftrace_pid failed: Invalid argument failed to set ftrace pid # Output after: ./perf ftrace -v -- ls function_graph tracer is used # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 4) | rcu_read_lock_sched_held() { 4) 0.552 us | rcu_lockdep_current_cpu_online(); 4) 6.124 us | } Reported-by: Alexander Schmidt <alexschm@de.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20210421120400.2126433-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-23perf auxtrace: Fix potential NULL pointer dereferenceLeo Yan
In the function auxtrace_parse_snapshot_options(), the callback pointer "itr->parse_snapshot_options" can be NULL if it has not been set during the AUX record initialization. This can cause tool crashing if the callback pointer "itr->parse_snapshot_options" is dereferenced without performing NULL check. Add a NULL check for the pointer "itr->parse_snapshot_options" before invoke the callback. Fixes: d20031bb63dd6dde ("perf tools: Add AUX area tracing Snapshot Mode") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Link: http://lore.kernel.org/lkml/20210420151554.2031768-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-23Merge remote-tracking branch 'regulator/for-5.13' into regulator-nextMark Brown
2021-04-23Merge remote-tracking branch 'regulator/for-5.12' into regulator-linusMark Brown
2021-04-23Merge tag 'drm-fixes-2021-04-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Just some small i915 and amdgpu fixes this week, should be all until you open the merge window. amdgpu: - Fix gpuvm page table update issue - Modifier fixes - Register fix for dimgrey cavefish i915: - GVT's BDW regression fix for cmd parser - Fix modesetting in case of unexpected AUX timeouts" * tag 'drm-fixes-2021-04-23' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish amd/display: allow non-linear multi-planar formats drm/amd/display: Update modifier list for gfx10_3 drm/amdgpu: reserve fence slot to update page table drm/i915: Fix modesetting in case of unexpected AUX timeouts drm/i915/gvt: Fix BDW command parser regression
2021-04-23Merge tag 'gpio-fixes-for-v5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: "Save and restore the sysconfig register in gpio-omap to fix a power-management issue" * tag 'gpio-fixes-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: omap: Save and restore sysconfig
2021-04-23platform/x86: gigabyte-wmi: add support for B550M AORUS PRO-PAlexey Klimov
From: Alexey Klimov <klimov.linux@gmail.com> Add the B550M AORUS PRO-P motherboard description to gigabyte_wmi_known_working_platforms. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Thomas Weißschuh <thomas@weissschuh.net> Link: https://lore.kernel.org/r/20210421234156.3942343-1-aklimov@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-23Merge branch 'Simplify bpf_snprintf verifier code'Alexei Starovoitov
Florent Revest says: ==================== Alexei requested a couple of cleanups to the bpf_snprintf and ARG_PTR_TO_CONST_STR verifier code. https://lore.kernel.org/bpf/CABRcYmL_SMT80UTyV98bRsOzW0wBd1sZcYUpTrcOAV+9m+YoWQ@mail.gmail.com/T/#t ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-04-23bpf: Remove unnecessary map checks for ARG_PTR_TO_CONST_STRFlorent Revest
reg->type is enforced by check_reg_type() and map should never be NULL (it would already have been dereferenced anyway) so these checks are unnecessary. Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210422235543.4007694-3-revest@chromium.org
2021-04-23bpf: Notify user if we ever hit a bpf_snprintf verifier bugFlorent Revest
In check_bpf_snprintf_call(), a map_direct_value_addr() of the fmt map should never fail because it has already been checked by ARG_PTR_TO_CONST_STR. But if it ever fails, it's better to error out with an explicit debug message rather than silently fail. Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210422235543.4007694-2-revest@chromium.org
2021-04-23Merge branch 'md-next' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.13/drivers Pull MD fixes from Song. * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid1: properly indicate failure when ending a failed write request md-cluster: fix use-after-free issue when removing rdev
2021-04-23md/raid1: properly indicate failure when ending a failed write requestPaul Clements
This patch addresses a data corruption bug in raid1 arrays using bitmaps. Without this fix, the bitmap bits for the failed I/O end up being cleared. Since we are in the failure leg of raid1_end_write_request, the request either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded). Fixes: eeba6809d8d5 ("md/raid1: end bio when the device faulty") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Paul Clements <paul.clements@us.sios.com> Signed-off-by: Song Liu <song@kernel.org>
2021-04-23md-cluster: fix use-after-free issue when removing rdevHeming Zhao
md_kick_rdev_from_array will remove rdev, so we should use rdev_for_each_safe to search list. How to trigger: env: Two nodes on kvm-qemu x86_64 VMs (2C2G with 2 iscsi luns). ``` node2=192.168.0.3 for i in {1..20}; do echo ==== $i `date` ====; mdadm -Ss && ssh ${node2} "mdadm -Ss" wipefs -a /dev/sda /dev/sdb mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l 1 /dev/sda \ /dev/sdb --assume-clean ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb" mdadm --wait /dev/md0 ssh ${node2} "mdadm --wait /dev/md0" mdadm --manage /dev/md0 --fail /dev/sda --remove /dev/sda sleep 1 done ``` Crash stack: ``` stack segment: 0000 [#1] SMP ... ... RIP: 0010:md_check_recovery+0x1e8/0x570 [md_mod] ... ... RSP: 0018:ffffb149807a7d68 EFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9d494c180800 RCX: ffff9d490fc01e50 RDX: fffff047c0ed8308 RSI: 0000000000000246 RDI: 0000000000000246 RBP: 6b6b6b6b6b6b6b6b R08: ffff9d490fc01e40 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d494c180818 R14: ffff9d493399ef38 R15: ffff9d4933a1d800 FS: 0000000000000000(0000) GS:ffff9d494f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe68cab9010 CR3: 000000004c6be001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: raid1d+0x5c/0xd40 [raid1] ? finish_task_switch+0x75/0x2a0 ? lock_timer_base+0x67/0x80 ? try_to_del_timer_sync+0x4d/0x80 ? del_timer_sync+0x41/0x50 ? schedule_timeout+0x254/0x2d0 ? md_start_sync+0xe0/0xe0 [md_mod] ? md_thread+0x127/0x160 [md_mod] md_thread+0x127/0x160 [md_mod] ? wait_woken+0x80/0x80 kthread+0x10d/0x130 ? kthread_park+0xa0/0xa0 ret_from_fork+0x1f/0x40 ``` Fixes: dbb64f8635f5d ("md-cluster: Fix adding of new disk with new reload code") Fixes: 659b254fa7392 ("md-cluster: remove a disk asynchronously from cluster environment") Cc: stable@vger.kernel.org Reviewed-by: Gang He <ghe@suse.com> Signed-off-by: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Song Liu <song@kernel.org>
2021-04-23iavf: redefine the magic number for FDIR GTP-U header fieldsHaiyue Wang
The flex-byte for GTP-U protocol header fields uses the magic number, which is hard to maintain and understand, define the interested fields with meaningful macro name, based on the GTP-U protocol stack: GTP-U header +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 0x1 |1|0|1|0|0| 0xff | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | TEID = 1654 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Sequence Number = 0 |N-PDU Number=0 |NextExtHdr=0x85| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ GTP-U Extension Header (PDU Session Container) +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ExtHdrLen=2 |Type=0 | Spare |0|0| QFI | PPI | Spare | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Padding |NextExtHdr=0x0 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23iavf: enhance the duplicated FDIR list scan handlingHaiyue Wang
When the FDIR entry is found, just return the result directly to break the loop. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23iavf: change the flex-byte support number to macro definitionHaiyue Wang
The maximum number (2) of flex-byte support is derived from ethtool use-def data size (8 byte). Change the magic number 2 to macro definition, and add the comment to track the design thinking, so the code is clear and easily maintained. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23iavf: remove duplicate free resources callsStefan Assmann
Both iavf_free_all_tx_resources() and iavf_free_all_rx_resources() have already been called in the very same function. Remove the duplicate calls. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal admin queue for kdumpCoiby Xu
The minimum size of admin send/receive queue is 1 and 2 respectively. The admin send queue can't be set to 1 because in that case, the firmware would fail to init. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal Rx and Tx ring buffers for kdumpCoiby Xu
Use the minimum of the number of descriptors thus we will allocate the minimal ring buffers for kdump. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal Tx and Rx pairs for kdumpCoiby Xu
Set the number of the MSI-X vectors to 1. When MSI-X is enabled, it's not allowed to use more TC queue pairs than MSI-X vectors (pf->num_lan_msix) exist. Thus the number of Tx and Rx pairs (vsi->num_queue_pairs) will be equal to the number of MSI-X vectors, i.e., 1. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: refactor repeated link state reporting codeAleksandr Loktionov
Refactor repeated link state reporting code into a separate helper functions: i40e_set_vf_link_state() i40e_vc_link_speed2mbps(). Add support of VIRTCHNL_VF_CAP_ADV_LINK_SPEED; Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf()Rasmus Villemoes
Commit 9af7706492f9 ("lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps") removed support for %pF and %pf, and correctly removed the handling of those cases in vbin_printf(). However, the corresponding cases in bstr_printf() were left behind. In the same series, %pf was re-purposed for dealing with fwnodes (3bd32d6a2ee6, "lib/vsprintf: Add %pfw conversion specifier for printing fwnode names"). So should anyone use %pf with the binary printf routines, vbin_printf() would (correctly, as it involves dereferencing the pointer) do the string formatting to the u32 array, but bstr_printf() would not copy the string from the u32 array, but instead interpret the first sizeof(void*) bytes of the formatted string as a pointer - which generally won't end well (also, all subsequent get_args would be out of sync). Fixes: 9af7706492f9 ("lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps") Cc: stable@vger.kernel.org Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210423094529.1862521-1-linux@rasmusvillemoes.dk
generated by cgit (git 2.34.1) at 2025-09-12 16:56:31 +0000