summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-23mm: Add set/end/wait functions for PG_private_2David Howells
Add three functions to manipulate PG_private_2: (*) set_page_private_2() - Set the flag and take an appropriate reference on the flagged page. (*) end_page_private_2() - Clear the flag, drop the reference and wake up any waiters, somewhat analogously with end_page_writeback(). (*) wait_on_page_private_2() - Wait for the flag to be cleared. Wrappers will need to be placed in the netfs lib header in the patch that adds that. [This implements a suggestion by Linus[1] to not mix the terminology of PG_private_2 and PG_fscache in the mm core function] Changes: v7: - Use compound_head() in all the functions to make them THP safe[6]. v5: - Add set and end functions, calling the end function end rather than unlock[3]. - Keep a ref on the page when PG_private_2 is set[4][5]. v4: - Remove extern from the declaration[2]. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Alexander Viro <viro@zeniv.linux.org.uk> cc: Christoph Hellwig <hch@lst.de> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/1330473.1612974547@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/CAHk-=wjgA-74ddehziVk=XAEMTKswPu1Yw4uaro1R3ibs27ztw@mail.gmail.com/ [1] Link: https://lore.kernel.org/r/20210216102659.GA27714@lst.de/ [2] Link: https://lore.kernel.org/r/161340387944.1303470.7944159520278177652.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539528910.286939.1252328699383291173.stgit@warthog.procyon.org.uk # v4 Link: https://lore.kernel.org/r/20210321105309.GG3420@casper.infradead.org [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/CAHk-=wjSGsRj7xwhSMQ6dAQiz53xA39pOG+XA_WeTgwBBu4uqg@mail.gmail.com/ [5] Link: https://lore.kernel.org/r/20210408145057.GN2531743@casper.infradead.org/ [6] Link: https://lore.kernel.org/r/161653788200.2770958.9517755716374927208.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789066013.6155.9816857201817288382.stgit@warthog.procyon.org.uk/ # v6
2021-04-23iov_iter: Add ITER_XARRAYDavid Howells
Add an iterator, ITER_XARRAY, that walks through a set of pages attached to an xarray, starting at a given page and offset and walking for the specified amount of bytes. The iterator supports transparent huge pages. The iterate_xarray() macro calls the helper function with rcu_access() helped. I think that this is only a problem for iov_iter_for_each_range() - and that returns an error for ITER_XARRAY (also, this function does not appear to be called). The caller must guarantee that the pages are all present and they must be locked using PG_locked, PG_writeback or PG_fscache to prevent them from going away or being migrated whilst they're being accessed. This is useful for copying data from socket buffers to inodes in network filesystems and for transferring data between those inodes and the cache using direct I/O. Whilst it is true that ITER_BVEC could be used instead, that would require a bio_vec array to be allocated to refer to all the pages - which should be redundant if inode->i_pages also points to all these pages. Note that older versions of this patch implemented an ITER_MAPPING instead, which was almost the same. Changes: v7: - Rename iter_xarray_copy_pages() to iter_xarray_populate_pages()[1]. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Alexander Viro <viro@zeniv.linux.org.uk> cc: Matthew Wilcox (Oracle) <willy@infradead.org> cc: Christoph Hellwig <hch@lst.de> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/3577430.1579705075@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/158861205740.340223.16592990225607814022.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/159465785214.1376674.6062549291411362531.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/160588477334.3465195.3608963255682568730.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118129703.1232039.17141248432017826976.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161026313.2537118.14676007075365418649.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340386671.1303470.10752208972482479840.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539527815.286939.14607323792547049341.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653786033.2770958.14154191921867463240.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789064740.6155.11932541175173658065.stgit@warthog.procyon.org.uk/ # v6 Link: https://lore.kernel.org/r/27c369a8f42bb8a617672b2dc0126a5c6df5a050.camel@kernel.org [1]
2021-04-23mmc: block: Update ext_csd.cache_ctrl if it was writtenAvri Altman
The cache function can be turned ON and OFF by writing to the CACHE_CTRL byte (EXT_CSD byte [33]). However, card->ext_csd.cache_ctrl is only set on init if cache size > 0. Fix that by explicitly setting ext_csd.cache_ctrl on ext-csd write. Signed-off-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210420134641.57343-3-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23xen-pciback: simplify vpci's find hookJan Beulich
There's no point in comparing SBDF - we can simply compare the struct pci_dev pointers. If they weren't the same for a given device, we'd have bigger problems from having stored a stale pointer. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/158273a2-d1b9-3545-b25d-affca867376c@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23xsk: Align XDP socket batch size with DPDKLi RongQing
DPDK default burst size is 32, however, kernel xsk sendto syscall can not handle all 32 at one time, and return with error. So make kernel XDP socket batch size larger to avoid unnecessary syscall fail and context switch which will help to increase performance. Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/1618378752-4191-1-git-send-email-lirongqing@baidu.com
2021-04-23xen-blkfront: Fix 'physical' typosBjorn Helgaas
Fix misspelling of "physical". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210126205509.2917606-1-helgaas@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23xen-blkback: fix compatibility bug with single page ringsPaul Durrant
Prior to commit 4a8c31a1c6f5 ("xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront"), the behaviour of xen-blkback when connecting to a frontend was: - read 'ring-page-order' - if not present then expect a single page ring specified by 'ring-ref' - else expect a ring specified by 'ring-refX' where X is between 0 and 1 << ring-page-order This was correct behaviour, but was broken by the afforementioned commit to become: - read 'ring-page-order' - if not present then expect a single page ring (i.e. ring-page-order = 0) - expect a ring specified by 'ring-refX' where X is between 0 and 1 << ring-page-order - if that didn't work then see if there's a single page ring specified by 'ring-ref' This incorrect behaviour works most of the time but fails when a frontend that sets 'ring-page-order' is unloaded and replaced by one that does not because, instead of reading 'ring-ref', xen-blkback will read the stale 'ring-ref0' left around by the previous frontend will try to map the wrong grant reference. This patch restores the original behaviour. Fixes: 4a8c31a1c6f5 ("xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront") Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210202175659.18452-1-paul@xen.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23xen: Remove support for PV ACPI cpu/memory hotplugBoris Ostrovsky
Commit 76fc253723ad ("xen/acpi-stub: Disable it b/c the acpi_processor_add is no longer called.") declared as BROKEN support for Xen ACPI stub (which is required for xen-acpi-{cpu|memory}-hotplug) and suggested that this is temporary and will be soon fixed. This was in March 2013. Further, commit cfafae940381 ("xen: rename dom0_op to platform_op") renamed an interface used by memory hotplug code without updating that code (as it was BROKEN and therefore not compiled). This was in November 2015 and has gone unnoticed for over 5 year. It is now clear that this code is of no interest to anyone and therefore should be removed. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/1618336344-3162-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23mmc: mmc_spi: Make of_mmc_spi.c resource provider agnosticAndy Shevchenko
In order to use the same driver on non-OF platforms, make of_mmc_spi.c resource provider agnostic. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-6-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: mmc_spi: Use already parsed IRQAndy Shevchenko
SPI core already parses and maps IRQ for us if provided. Use it instead of double parsing in mmc_spi_get_pdata(). Due to above, change condition, since SPI core can hold an error pointer as invalid IRQ. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-5-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: mmc_spi: Drop unused NO_IRQ definitionAndy Shevchenko
After the commit 073350f7b562 ("mmc: mmc_spi: Fix return value evaluation of irq_of_parse_and_map()") the NO_IRQ is not used anymore, drop it for good. Fixes: 073350f7b562 ("mmc: mmc_spi: Fix return value evaluation of irq_of_parse_and_map()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-4-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: mmc_spi: Set up polling even if voltage-ranges is not presentAndy Shevchenko
When voltage-ranges property is not present the driver assumes that it is 3.3v (3.2v..3.4v). But at the same time it disallows polling. Fix that by dropping the comparison to 0 when no property is provided. While at it, mark voltage-ranges property optional as it was initially. Fixes: 9c43df57910b ("mmc_spi: Add support for OpenFirmware bindings") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-3-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: core: Convert mmc_of_parse_voltage() to use device property APIAndy Shevchenko
mmc_of_parse() for a few years has been using device property API. Convert mmc_of_parse_voltage() as well. At the same time switch users to new API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23mmc: core: Correct descriptions in mmc_of_parse()Andy Shevchenko
Since it has been converted to use device property API, the function and field descriptions become outdated. Correct them. Fixes: 73a47a9bb3e2 ("mmc: core: Use device_property_read instead of of_property_read") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-23xen/pciback: Fix incorrect type warningsMuhammad Usama Anjum
Correct enum pci_channel_io_normal should be used instead of putting integer value 1. Fix following smatch warnings: drivers/xen/xen-pciback/pci_stub.c:805:40: warning: incorrect type in argument 2 (different base types) drivers/xen/xen-pciback/pci_stub.c:805:40: expected restricted pci_channel_state_t [usertype] state drivers/xen/xen-pciback/pci_stub.c:805:40: got int drivers/xen/xen-pciback/pci_stub.c:862:40: warning: incorrect type in argument 2 (different base types) drivers/xen/xen-pciback/pci_stub.c:862:40: expected restricted pci_channel_state_t [usertype] state drivers/xen/xen-pciback/pci_stub.c:862:40: got int drivers/xen/xen-pciback/pci_stub.c:973:31: warning: incorrect type in argument 2 (different base types) drivers/xen/xen-pciback/pci_stub.c:973:31: expected restricted pci_channel_state_t [usertype] state drivers/xen/xen-pciback/pci_stub.c:973:31: got int Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210326181442.GA1735905@LEGION Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23signal, perf: Add missing TRAP_PERF case in siginfo_layout()Marco Elver
Add the missing TRAP_PERF case in siginfo_layout() for interpreting the layout correctly as SIL_PERF_EVENT instead of just SIL_FAULT. This ensures the si_perf field is copied and not just the si_addr field. This was caught and tested by running the perf_events/sigtrap_threads kselftest as a 32-bit binary with a 64-bit kernel. Fixes: fb6cc127e0b6 ("signal: Introduce TRAP_PERF si_code and si_perf to siginfo") Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210422191823.79012-2-elver@google.com
2021-04-23signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architecturesMarco Elver
The alignment of a structure is that of its largest member. On architectures like 32-bit Arm (but not e.g. 32-bit x86) 64-bit integers will require 64-bit alignment and not its natural word size. This means that there is no portable way to add 64-bit integers to siginfo_t on 32-bit architectures without breaking the ABI, because siginfo_t does not yet (and therefore likely never will) contain 64-bit fields on 32-bit architectures. Adding a 64-bit integer could change the alignment of the union after the 3 initial int si_signo, si_errno, si_code, thus introducing 4 bytes of padding shifting the entire union, which would break the ABI. One alternative would be to use the __packed attribute, however, it is non-standard C. Given siginfo_t has definitions outside the Linux kernel in various standard libraries that can be compiled with any number of different compilers (not just those we rely on), using non-standard attributes on siginfo_t should be avoided to ensure portability. In the case of the si_perf field, word size is sufficient since there is no exact requirement on size, given the data it contains is user-defined via perf_event_attr::sig_data. On 32-bit architectures, any excess bits of perf_event_attr::sig_data will therefore be truncated when copying into si_perf. Since si_perf is intended to disambiguate events (e.g. encoding relevant information if there are more events of the same type), 32 bits should provide enough entropy to do so on 32-bit architectures. For 64-bit architectures, no change is intended. Fixes: fb6cc127e0b6 ("signal: Introduce TRAP_PERF si_code and si_perf to siginfo") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lkml.kernel.org/r/20210422191823.79012-1-elver@google.com
2021-04-23perf/x86: Allow for 8<num_fixed_counters<16Colin Ian King
The 64 bit value read from MSR_ARCH_PERFMON_FIXED_CTR_CTRL is being bit-wise masked with the value (0x03 << i*4). However, the shifted value is evaluated using 32 bit arithmetic, so will UB when i > 8. Fix this by making 0x03 a ULL so that the shift is performed using 64 bit arithmetic. This makes the arithmetic internally consistent and preparers for the day when hardware provides 8<num_fixed_counters<16. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210420142907.382417-1-colin.king@canonical.com
2021-04-23Merge tag 'drm-misc-next-fixes-2021-04-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next A few fixes for the next merge window, with some build fixes for anx7625 and lt8912b bridges, incorrect error handling for lt8912b and TTM, and one fix for TTM page limit accounting. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210422163329.dvbuwre3akwdmzjt@gilmour
2021-04-23Merge tag 'drm-intel-fixes-2021-04-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - GVT's BDW regression fix for cmd parser (Zhenyu) - Fix modesetting in case of unexpected AUX timeouts (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YIGZ3pQPgPQtZtyI@intel.com
2021-04-23Merge tag 'amd-drm-fixes-5.12-2021-04-21' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.12-2021-04-21: amdgpu: - Fix gpuvm page table update issue - Modifier fixes - Register fix for dimgrey cavefish Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421220456.3839-1-alexander.deucher@amd.com
2021-04-22Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Very late in the cycle but both risky if left unfixed and more or less obvious.." * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails vhost-vdpa: protect concurrent access to vhost device iotlb
2021-04-22vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs failsEli Cohen
Set err = -ENOMEM if dma_map_sg_attrs() fails so the function reutrns error. Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code") Signed-off-by: Eli Cohen <elic@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210411083646.910546-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-04-22vhost-vdpa: protect concurrent access to vhost device iotlbXie Yongji
Protect vhost device iotlb by vhost_dev->mutex. Otherwise, it might cause corruption of the list and interval tree in struct vhost_iotlb if userspace sends the VHOST_IOTLB_MSG_V2 message concurrently. Fixes: 4c8cf318("vhost: introduce vDPA-based backend") Cc: stable@vger.kernel.org Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210412095512.178-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-22Merge branch 'RTL8211E-RGMII-D'David S. Miller
Kunihiko Hayashi says: ==================== Change phy-mode to RGMII-ID to enable delay pins for RTL8211E UniPhier PXs2, LD20, and PXs3 boards have RTL8211E ethernet phy, and the phy have the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY pins. After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the delays are working correctly, however, "rgmii" means no delay and the phy doesn't work. So need to set the phy-mode to "rgmii-id" to show that RX/TX delays are enabled. Changes since v1: - Fix the commit message ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for ↵Kunihiko Hayashi
RTL8211E UniPhier LD20 and PXs3 boards have RTL8211E ethernet phy, and the phy have the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY pins. After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the delays are working correctly, however, "rgmii" means no delay and the phy doesn't work. So need to set the phy-mode to "rgmii-id" to show that RX/TX delays are enabled. Fixes: c73730ee4c9a ("arm64: dts: uniphier: add AVE ethernet node") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for ↵Kunihiko Hayashi
RTL8211E UniPhier PXs2 boards have RTL8211E ethernet phy, and the phy have the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY pins. After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the delays are working correctly, however, "rgmii" means no delay and the phy doesn't work. So need to set the phy-mode to "rgmii-id" to show that RX/TX delays are enabled. Fixes: e3cc931921d2 ("ARM: dts: uniphier: add AVE ethernet node") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22Merge branch 'stmmac-swmac-desc-prefetch'David S. Miller
Mohammad Athari Bin Ismail says: ==================== Enable DWMAC HW descriptor prefetch This patch series to add setting for HW descriptor prefetch for DWMAC version 5.20 onwards. For Intel platform, enable the capability by default. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22stmmac: intel: Enable HW descriptor prefetch by defaultMohammad Athari Bin Ismail
Enable HW descriptor prefetch by default by setting plat->dma_cfg->dche = true in intel_mgbe_common_data(). Need to be noted that this capability only be supported in DWMAC core version 5.20 onwards. In stmmac, there is a checking to check the core version. If the core version is below 5.20, this capability wouldn`t be configured. Below is the iperf result comparison between HW descriptor prefetch disabled(DCHE=0b) and enabled(DCHE=1b). Tested on Intel Elkhartlake platform with DWMAC Core 5.20. Observed line rate performance improvement with HW descriptor prefetch enabled. DCHE = 0b [ 5] local 169.254.1.162 port 42123 connected to 169.254.244.142 port 5201 [ ID] Interval Transfer Bitrate Total Datagrams [ 5] 0.00-1.00 sec 96.7 MBytes 811 Mbits/sec 70050 [ 5] 1.00-2.00 sec 96.5 MBytes 809 Mbits/sec 69850 [ 5] 2.00-3.00 sec 96.3 MBytes 808 Mbits/sec 69720 [ 5] 3.00-4.00 sec 95.9 MBytes 804 Mbits/sec 69450 [ 5] 4.00-5.00 sec 96.0 MBytes 806 Mbits/sec 69530 [ 5] 5.00-6.00 sec 96.8 MBytes 812 Mbits/sec 70080 [ 5] 6.00-7.00 sec 96.9 MBytes 813 Mbits/sec 70140 [ 5] 7.00-8.00 sec 96.8 MBytes 812 Mbits/sec 70080 [ 5] 8.00-9.00 sec 97.0 MBytes 814 Mbits/sec 70230 [ 5] 9.00-10.00 sec 96.9 MBytes 813 Mbits/sec 70170 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 966 MBytes 810 Mbits/sec 0.000 ms 0/699300 (0%) sender [ 5] 0.00-10.00 sec 966 MBytes 810 Mbits/sec 0.011 ms 0/699265 (0%) receiver DCHE = 1b [ 5] local 169.254.1.162 port 49740 connected to 169.254.244.142 port 5201 [ ID] Interval Transfer Bitrate Total Datagrams [ 5] 0.00-1.00 sec 97.9 MBytes 821 Mbits/sec 70880 [ 5] 1.00-2.00 sec 98.1 MBytes 823 Mbits/sec 71060 [ 5] 2.00-3.00 sec 98.2 MBytes 824 Mbits/sec 71140 [ 5] 3.00-4.00 sec 98.2 MBytes 824 Mbits/sec 71090 [ 5] 4.00-5.00 sec 98.1 MBytes 823 Mbits/sec 71050 [ 5] 5.00-6.00 sec 98.1 MBytes 823 Mbits/sec 71040 [ 5] 6.00-7.00 sec 98.1 MBytes 823 Mbits/sec 71050 [ 5] 7.00-8.00 sec 98.2 MBytes 824 Mbits/sec 71140 [ 5] 8.00-9.00 sec 98.2 MBytes 824 Mbits/sec 71120 [ 5] 9.00-10.00 sec 98.3 MBytes 824 Mbits/sec 71150 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 981 MBytes 823 Mbits/sec 0.000 ms 0/710720 (0%) sender [ 5] 0.00-10.00 sec 981 MBytes 823 Mbits/sec 0.041 ms 0/710650 (0%) receiver Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22net: stmmac: Add HW descriptor prefetch setting for DWMAC Core 5.20 onwardsMohammad Athari Bin Ismail
DWMAC Core 5.20 onwards supports HW descriptor prefetching. Additionally, it also depends on platform specific RTL configuration. This capability could be enabled by setting DMA_Mode bit-19 (DCHE). So, to enable this cability, platform must set plat->dma_cfg->dche = true and the DWMAC core version must be 5.20 onwards. Else, this capability wouldn`t be configured Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22net/mlx4: Treat VFs fair when handling comm_channel_eventsHans Westgaard Ry
Handling comm_channel_event in mlx4_master_comm_channel uses a double loop to determine which slaves have requested work. The search is always started at lowest slave. This leads to unfairness; lower VFs tends to be prioritized over higher VFs. The patch uses find_next_bit to determine which slaves to handle. Fairness is implemented by always starting at the next to the last start. An MPI program has been used to measure improvements. It runs 500 ibv_reg_mr, synchronizes with all other instances and then runs 500 ibv_dereg_mr. The results running 500 processes, time reported is for running 500 calls: ibv_reg_mr: Mod. Org. mlx4_1 403.356ms 424.674ms mlx4_2 403.355ms 424.674ms mlx4_3 403.354ms 424.674ms mlx4_4 403.355ms 424.674ms mlx4_5 403.357ms 424.677ms mlx4_6 403.354ms 424.676ms mlx4_7 403.357ms 424.675ms mlx4_8 403.355ms 424.675ms ibv_dereg_mr: Mod. Org. mlx4_1 116.408ms 142.818ms mlx4_2 116.434ms 142.793ms mlx4_3 116.488ms 143.247ms mlx4_4 116.679ms 143.230ms mlx4_5 112.017ms 107.204ms mlx4_6 112.032ms 107.516ms mlx4_7 112.083ms 184.195ms mlx4_8 115.089ms 190.618ms Suggested-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22bnxt_en: fix ternary sign extension bug in bnxt_show_temp()Dan Carpenter
The problem is that bnxt_show_temp() returns long but "rc" is an int and "len" is a u32. With ternary operations the type promotion is quite tricky. The negative "rc" is first promoted to u32 and then to long so it ends up being a high positive value instead of a a negative as we intended. Fix this by removing the ternary. Fixes: d69753fa1ecb ("bnxt_en: return proper error codes in bnxt_show_temp") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22bpf, doc: Fix some invalid links in bpf_devel_QA.rstTiezhu Yang
There exist some errors "404 Not Found" when I click the link of "MAINTAINERS" [1], "samples/bpf/" [2] and "selftests" [3] in the documentation "HOWTO interact with BPF subsystem" [4]. As Alexei Starovoitov suggested, just remove "MAINTAINERS" and "samples/bpf/" links and use correct link of "selftests". [1] https://www.kernel.org/doc/html/MAINTAINERS [2] https://www.kernel.org/doc/html/samples/bpf/ [3] https://www.kernel.org/doc/html/tools/testing/selftests/bpf/ [4] https://www.kernel.org/doc/html/latest/bpf/bpf_devel_QA.html Fixes: 542228384888 ("bpf, doc: convert bpf_devel_QA.rst to use RST formatting") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/1619062560-30483-1-git-send-email-yangtiezhu@loongson.cn
2021-04-22dt-bindings: mali-bifrost: add dma-coherentKevin Hilman
Add optional dma-coherent property to binding doc. Found by 'make dtbs_check' on arm64/amlogic DT files. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210421204833.18523-2-khilman@baylibre.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-22arm64: dts: amlogic: misc DT schema fixupsKevin Hilman
Take a pass at cleaning up a bunch of warnings from 'make dtbs_check' that have crept in. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210421204833.18523-1-khilman@baylibre.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-22Merge tag 'sunxi-fixes-for-5.12-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes One fix for the MMC card detect on the Pine H64 board * tag 'sunxi-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS Link: https://lore.kernel.org/r/45fc5e4d-ef48-4729-a869-79a8f288bb83.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-22net, xdp: Update pkt_type if generic XDP changes unicast MACMartin Willi
If a generic XDP program changes the destination MAC address from/to multicast/broadcast, the skb->pkt_type is updated to properly handle the packet when passed up the stack. When changing the MAC from/to the NICs MAC, PACKET_HOST/OTHERHOST is not updated, though, making the behavior different from that of native XDP. Remember the PACKET_HOST/OTHERHOST state before calling the program in generic XDP, and update pkt_type accordingly if the destination MAC address has changed. As eth_type_trans() assumes a default pkt_type of PACKET_HOST, restore that before calling it. The use case for this is when a XDP program wants to push received packets up the stack by rewriting the MAC to the NICs MAC, for example by cluster nodes sharing MAC addresses. Fixes: 297249569932 ("net: fix generic XDP to handle if eth header was mangled") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210419141559.8611-1-martin@strongswan.org
2021-04-22r8152: replace return with break for ram code speedup mode timeoutHayes Wang
When the timeout occurs, we still have to run the following process for releasing patch request. Otherwise, the PHY would keep no link. Therefore, use break to stop the loop of loading firmware and release the patch request rather than return the function directly. Fixes: 4a51b0e8a014 ("r8152: support PHY firmware for RTL8156 series") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-04-22 This series contains updates to virtchnl header file, ice, and iavf drivers. Vignesh adds support to warn about potentially malicious VFs; those that are overflowing the mailbox for the ice driver. Michal adds support for an allowlist/denylist of VF commands based on supported capabilities for the ice driver. Brett adds support for iavf UDP segmentation offload by adding the capability bit to virtchnl, advertising support in the ice driver, and enabling it in the iavf driver. He also adds a helper function for getting the VF VSI for ice. Colin Ian King removes an unneeded pointer assignment. Qi enables support in the ice driver to support virtchnl requests from the iavf to configure its own RSS input set. This includes adding new capability bits, structures, and commands to virtchnl header file. Haiyue enables configuring RSS flow hash via ethtool to support TCP, UDP and SCTP protocols in iavf. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/tpmddLinus Torvalds
Pull tpm fix from James Bottomley: "This is an urgent regression fix for a tpm patch set that went in this merge window. It looks like a rebase before the original pull request lost a tpm_try_get_ops() so we have a lock imbalance in our code which is causing oopses. The original patch was correct on the mailing list. I'm sending this in agreement with Mimi (as joint maintainers of trusted keys) because Jarkko is off communing with the Reindeer or whatever it is Finns do when on holiday" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/tpmdd: KEYS: trusted: Fix TPM reservation for seal/unseal
2021-04-22vxge: avoid -Wemtpy-body warningsArnd Bergmann
There are a few warnings about empty debug macros in this driver: drivers/net/ethernet/neterion/vxge/vxge-main.c: In function 'vxge_probe': drivers/net/ethernet/neterion/vxge/vxge-main.c:4480:76: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 4480 | "Failed in enabling SRIOV mode: %d\n", ret); Change them to proper 'do { } while (0)' expressions to make the code a little more robust and avoid the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22net: wwan: core: Return poll error in case of port removalLoic Poulain
Ensure that the poll system call returns proper error flags when port is removed (nullified port ops), allowing user side to properly fail, without further read or write. Fixes: 9a44c1cc6388 ("net: Add a WWAN subsystem") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22netdevsim: Only use sampling truncation length when validIdo Schimmel
When the sampling truncation length is invalid (zero), pass the length of the packet. Without the fix, no payload is reported to user space when the truncation length is zero. Fixes: a8700c3dd0a4 ("netdevsim: Add dummy psample implementation") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22net: enetc: fix link error againArnd Bergmann
A link time bug that I had fixed before has come back now that another sub-module was added to the enetc driver: ERROR: modpost: "enetc_ierb_register_pf" [drivers/net/ethernet/freescale/enetc/fsl-enetc.ko] undefined! The problem is that the enetc Makefile is not actually used for the ierb module if that is the only built-in driver in there and everything else is a loadable module. Fix it by always entering the directory this time, regardless of which symbols are configured. This should reliably fix the problem and prevent it from coming back another time. Fixes: 112463ddbe82 ("net: dsa: felix: fix link error") Fixes: e7d48e5fbf30 ("net: enetc: add a mini driver for the Integrated Endpoint Register Block") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22net: mana: fix PCI_HYPERV dependencyArnd Bergmann
The MANA driver causes a build failure in some configurations when it selects an unavailable symbol: WARNING: unmet direct dependencies detected for PCI_HYPERV Depends on [n]: PCI [=y] && X86_64 [=y] && HYPERV [=n] && PCI_MSI [=y] && PCI_MSI_IRQ_DOMAIN [=y] && SYSFS [=y] Selected by [y]: - MICROSOFT_MANA [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROSOFT [=y] && PCI_MSI [=y] && X86_64 [=y] drivers/pci/controller/pci-hyperv.c: In function 'hv_irq_unmask': drivers/pci/controller/pci-hyperv.c:1217:9: error: implicit declaration of function 'hv_set_msi_entry_from_desc' [-Werror=implicit-function-declaration] 1217 | hv_set_msi_entry_from_desc(&params->int_entry.msi_entry, msi_desc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ A PCI driver should never depend on a particular host bridge implementation in the first place, but if we have this dependency it's better to express it as a 'depends on' rather than 'select'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22net: phy: marvell: fix m88e1111_set_downshiftMaxim Kochetkov
Changing downshift params without software reset has no effect, so call genphy_soft_reset() after change downshift params. As the datasheet says: Changes to these bits are disruptive to the normal operation therefore, any changes to these registers must be followed by software reset to take effect. Fixes: 5c6bc5199b5d ("net: phy: marvell: add downshift support for M88E1111") Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22net: phy: marvell: fix m88e1011_set_downshiftMaxim Kochetkov
Changing downshift params without software reset has no effect, so call genphy_soft_reset() after change downshift params. As the datasheet says: Changes to these bits are disruptive to the normal operation therefore, any changes to these registers must be followed by software reset to take effect. Fixes: 911af5e149bb ("net: phy: marvell: fix downshift function naming") Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22iavf: Support for modifying SCTP RSS flow hashingHaiyue Wang
Provide the ability to enable SCTP RSS hashing by ethtool. It gives users option of generating RSS hash based on the SCTP source and destination ports numbers, IPv4 or IPv6 source and destination addresses. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-22iavf: Support for modifying UDP RSS flow hashingHaiyue Wang
Provides the ability to enable UDP RSS hashing by ethtool. It gives users option of generating RSS hash based on the UDP source and destination ports numbers, IPv4 or IPv6 source and destination addresses. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-22iavf: Support for modifying TCP RSS flow hashingHaiyue Wang
Provides the ability to enable TCP RSS hashing by ethtool. It gives users option of generating RSS hash based on the TCP source and destination ports numbers, IPv4 or IPv6 source and destination addresses. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 23:49:42 +0000