summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-19wifi: ath11k: Fix incorrect update of radiotap fieldsPradeep Kumar Chitrapu
Fix incorrect update of ppdu stats causing incorrect radiotap fields. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403195738.25367-3-quic_pradeepc@quicinc.com
2023-04-19wifi: ath11k: fix tx status reporting in encap offload modePradeep Kumar Chitrapu
ieee80211_tx_status() treats packets in 802.11 frame format and tries to extract sta address from packet header. When tx encap offload is enabled, this becomes invalid operation. Hence, switch to using ieee80211_tx_status_ext() after filling in station address for handling both 802.11 and 802.3 frames. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403195738.25367-2-quic_pradeepc@quicinc.com
2023-04-19wifi: ath11k: add peer mac information in failure casesHarshitha Prem
During reo command failure, the peer mac detail for which the reo command was not successful is unknown. Hence, to improve the debuggability, add the peer mac information in the failure cases which would be useful during multi client cases. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-4-quic_hprem@quicinc.com
2023-04-19wifi: ath11k: Prevent REO cmd failuresHarshitha Prem
Prevent REO cmd failures causing double free by increasing REO cmd ring size and moving REO status ring mask to IRQ group 3 from group 0 to separate from tx completion ring on IRQ group 0 which may delay reo status processing. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-3-quic_hprem@quicinc.com
2023-04-19wifi: ath11k: fix double free of peer rx_tid during reo cmd failureHarshitha Prem
Peer rx_tid is locally copied thrice during peer_rx_tid_cleanup to send REO_CMD_UPDATE_RX_QUEUE followed by REO_CMD_FLUSH_CACHE to flush all aged REO descriptors from HW cache. When sending REO_CMD_FLUSH_CACHE fails, we do dma unmap of already mapped rx_tid->vaddr and free it. This is not checked during reo_cmd_list_cleanup() and dp_reo_cmd_free() before trying to free and unmap again. Fix this by setting rx_tid->vaddr NULL in rx tid delete and also wherever freeing it to check in reo_cmd_list_cleanup() and reo_cmd_free() before trying to free again. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-2-quic_hprem@quicinc.com
2023-04-19dt-bindings: net: Convert ath10k to YAMLKonrad Dybcio
Convert the ath10k bindings to YAML. Dropped properties that are absent at the current state of mainline: - qcom,msi_addr - qcom,msi_base Somewhat based on the ath11k bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230406-topic-ath10k_bindings-v4-1-9f67a6bb0d56@linaro.org
2023-04-19spi: spi-rockchip: Fix missing unwind goto in rockchip_sfc_probe()Li Lanzhe
If devm_request_irq() fails, then we are directly return 'ret' without clk_disable_unprepare(sfc->clk) and clk_disable_unprepare(sfc->hclk). Fix this by changing direct return to a goto 'err_irq'. Fixes: 0b89fc0a367e ("spi: rockchip-sfc: add rockchip serial flash controller") Signed-off-by: Li Lanzhe <u202212060@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230419115030.6029-1-u202212060@hust.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-19stmmac: fix changing mac addressCorinna Vinschen
Without the IFF_LIVE_ADDR_CHANGE flag being set, the network code disallows changing the mac address while the interface is UP. Consequences are, for instance, that the interface can't be used in a failover bond. Add the missing flag to net_device priv_flags. Tested on Intel Elkhart Lake with default settings, as well as with failover and alb mode bonds. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19hamradio: drop ISA_DMA_API dependencyArnd Bergmann
It looks like the dependency got added accidentally in commit a553260618d8 ("[PATCH] ISA DMA Kconfig fixes - part 3"). Unlike the previously removed dmascc driver, the scc driver never used DMA. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19mlxsw: pci: Fix possible crash during initializationIdo Schimmel
During initialization the driver issues a reset command via its command interface in order to remove previous configuration from the device. After issuing the reset, the driver waits for 200ms before polling on the "system_status" register using memory-mapped IO until the device reaches a ready state (0x5E). The wait is necessary because the reset command only triggers the reset, but the reset itself happens asynchronously. If the driver starts polling too soon, the read of the "system_status" register will never return and the system will crash [1]. The issue was discovered when the device was flashed with a development firmware version where the reset routine took longer to complete. The issue was fixed in the firmware, but it exposed the fact that the current wait time is borderline. Fix by increasing the wait time from 200ms to 400ms. With this patch and the buggy firmware version, the issue did not reproduce in 10 reboots whereas without the patch the issue is reproduced quite consistently. [1] mce: CPUs not responding to MCE broadcast (may include false positives): 0,4 mce: CPUs not responding to MCE broadcast (may include false positives): 0,4 Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler Shutting down cpus with NMI Kernel Offset: 0x12000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: ac004e84164e ("mlxsw: pci: Wait longer before accessing the device after reset") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19Merge branch 'skbuff-bitfields'David S. Miller
Jakub Kicinski says: ==================== net: skbuff: hide some bitfield members There is a number of protocol or subsystem specific fields in struct sk_buff which are only accessed by one subsystem. We can wrap them in ifdefs with minimal code impact. This gives us a better chance to save a 2B and a 4B holes resulting with the following savings (assuming a lucky kernel config): - /* size: 232, cachelines: 4, members: 28 */ - /* sum members: 227, holes: 1, sum holes: 4 */ - /* sum bitfield members: 8 bits (1 bytes) */ + /* size: 224, cachelines: 4, members: 28 */ /* forced alignments: 2 */ - /* last cacheline: 40 bytes */ + /* last cacheline: 32 bytes */ I think that the changes shouldn't be too controversial. The only one I'm not 100% sure of is the SCTP one, 12 extra LoC for one bit.. But it did fit squarely in the "this bit has only one user" category. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Simon Horman <horms@kernel.org>
2023-04-19net: skbuff: hide nf_trace and ipvs_propertyJakub Kicinski
Accesses to nf_trace and ipvs_property are already wrapped by ifdefs where necessary. Don't allocate the bits for those fields at all if possible. Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Simon Horman <horms@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: skbuff: push nf_trace down the bitfieldJakub Kicinski
nf_trace is a debug feature, AFAIU, and yet it sits oddly high in the sk_buff bitfield. Move it down, pushing up dst_pending_confirm and inner_protocol_type. Next change will make nf_trace optional (under Kconfig) and all optional fields should be placed after 2b fields to avoid 2b fields straddling bytes. dst_pending_confirm is L3, so it makes sense next to ignore_df. inner_protocol_type goes up just to keep the balance. Acked-by: Florian Westphal <fw@strlen.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: skbuff: move alloc_cpu into a potential holeJakub Kicinski
alloc_cpu is currently between 4 byte fields, so it's almost guaranteed to create a 2B hole. It has a knock on effect of creating a 4B hole after @end (and @end and @tail being in different cachelines). None of this matters hugely, but for kernel configs which don't enable all the features there may well be a 2B hole after the bitfield. Move alloc_cpu there. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: skbuff: hide csum_not_inet when CONFIG_IP_SCTP not setJakub Kicinski
SCTP is not universally deployed, allow hiding its bit from the skb. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: skbuff: hide wifi_acked when CONFIG_WIRELESS not setJakub Kicinski
Datacenter kernel builds will very likely not include WIRELESS, so let them shave 2 bits off the skb by hiding the wifi fields. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19Merge branch 'switch-phy-leds'David S. Miller
Christian Marangi says: ==================== net: Add basic LED support for switch/phy This is a continue of [1]. It was decided to take a more gradual approach to implement LEDs support for switch and phy starting with basic support and then implementing the hw control part when we have all the prereq done. This series implements only the brightness_set() and blink_set() ops. An example of switch implementation is done with qca8k. For PHY a more generic approach is used with implementing the LED support in PHY core and with the user (in this case marvell) adding all the required functions. Currently we set the default-state as "keep" to not change the default configuration of the declared LEDs since almost every switch have a default configuration. [1] https://lore.kernel.org/lkml/20230216013230.22978-1-ansuelsmth@gmail.com/ Changes in new series v7: - Drop ethernet-leds schema and add unevaluatedProperties to ethernet-controller and ethernet-phy schema - Drop function-enumerator binding from schema example and DT - Set devname_mandatory for qca8k leds and assign better name to LEDs using the format {slave_mii_bus id}:0{port number}:{color}:{function} - Add Documentation patch for Correct LEDs naming from Andrew - Changes in Andrew patch: - net: phy: Add a binding for PHY LEDs - Convert index from u32 to u8 - net: phy: phy_device: Call into the PHY driver to set LED brightness - Fixup kernel doc - Convert index from u32 to u8 - net: phy: marvell: Add software control of the LEDs - Convert index from u32 to u8 - net: phy: phy_device: Call into the PHY driver to set LED blinking - Kernel doc fix - Convert index from u32 to u8 - net: phy: marvell: Implement led_blink_set() - Convert index from u32 to u8 Changes in new series v6: - Add leds-ethernet.yaml to document reg in led node - Update ethernet-controller and ethernet-phy to follow new leds-ethernet schema - Fix comments in qca8k-leds.c (at least -> at most) (wrong GENMASK for led phy 0 and 4) - Add review and ack tag from Pavel Machek - Changes in Andrew patch: - leds: Provide stubs for when CLASS_LED & NEW_LEDS are disabled - Change LED_CLASS to NEW_LEDS for led_init_default_state_get() - net: phy: Add a binding for PHY LEDs - Add dependency on LED_CLASS - Drop review tag from Michal Kubiak (patch modified) Changes in new series v5: - Rebase everything on top of net-next/main - Add more info on LED probe fail for qca8k - Drop some additional raw number and move to define in qca8k header - Add additional info on LED mapping on qca8k regs - Checks port number in qca8k switch port parse - Changes in Andrew patch: - Add additional patch for stubs when CLASS_LED disabled - Drop CLASS_LED dependency for PHYLIB (to fix kbot errors reported) Changes in new series v4: - Changes in Andrew patch: - net: phy: Add a binding for PHY LEDs: - Rename phy_led: led_list to list - Rename phy_device: led_list to leds - Remove phy_leds_remove() since devm_ should do what is needed - Fixup documentation for struct phy_led - Fail probe on LED errors - net: phy: phy_device: Call into the PHY driver to set LED brightness - Moved phy_led::phydev from previous patch to here since it is first used here. - net: phy: marvell: Implement led_blink_set() - Use int instead of unsigned - net: phy: marvell: Add software control of the LEDs - Use int instead of unsigned - Add depends on LED_CLASS for qca8k Kconfig - Fix Makefile for qca8k as suggested - Move qca8k_setup_led_ctrl to separate header - Move Documentation from dsa-port to ethernet-controller - Drop trailing . from Andrew patch fro consistency Changes in new series v3: - Move QCA8K_LEDS Kconfig option from tristate to bool - Use new helper led_init_default_state_get for default-state in qca8k - Drop cled_qca8k_brightness_get() as there isn't a good way to describe the mode the led is currently in - Rework qca8k_led_brightness_get() to return true only when LED is set to always ON Changes in new series v2: - Add LEDs node for rb3011 - Fix rb3011 switch node unevaluated properties while running make dtbs_check - Fix a copypaste error in qca8k-leds.c for port 4 required shift - Drop phy-handle usage for qca8k and use qca8k_port_to_phy() - Add review tag from Andrew - Add Christian Marangi SOB in each Andrew patch - Add extra description for dsa-port stressing that PHY have no access and LED are controlled by the related MAC - Add missing additionalProperties for dsa-port.yaml and ethernet-phy.yaml Changes from the old v8 series: - Drop linux,default-trigger set to netdev. - Dropped every hw control related patch and implement only blink_set and brightness_set - Add default-state to "keep" for each LED node example ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19Documentation: LEDs: Describe good names for network LEDsAndrew Lunn
Network LEDs can exist in both the MAC and the PHY. Naming is difficult because the netdev name is neither stable or unique, do to commands like ip link set name eth42 dev eth0, and network namesspaces. Give some example names where the MAC and the PHY have unique names based on device tree nodes, or PCI bus addresses. Since the LED can be used for anything which Linux supports for LEDs, avoid using names like activity or link, rather describe the location on the RJ-45, of what the RJ-45 is expected to be used for, WAN/LAN etc. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19arm: mvebu: dt: Add PHY LED support for 370-rd WAN portAndrew Lunn
The WAN port of the 370-RD has a Marvell PHY, with one LED on the front panel.y List this LED in the device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19dt-bindings: net: phy: Document support for LEDs nodeChristian Marangi
Document support for LEDs node in phy and add an example for it. PHY LED will have to match led pattern and should be treated as a generic led. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each portChristian Marangi
Add Switch LED for each port for MikroTik RB3011UiAS-RM. MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips connected. It was discovered that in the hardware design all 3 Switch LED trace of the related port is connected to the same LED. This was discovered by setting to 'always on' the related led in the switch regs and noticing that all 3 LED for the specific port (for example for port 1) cause the connected LED for port 1 to turn on. As an extra test we tried enabling 2 different LED for the port resulting in the LED turned off only if every led in the reg was off. Aside from this funny and strange hardware implementation, the device itself have one green LED for each port, resulting in 10 green LED one for each of the 10 supported port. Cc: Jonathan McDowell <noodles@earth.li> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19ARM: dts: qcom: ipq8064-rb3011: Drop unevaluated properties in switch nodesChristian Marangi
IPQ8064 MikroTik RB3011UiAS-RM DT have currently unevaluted properties in the 2 switch nodes. The bindings #address-cells and #size-cells are redundant and cause warning for 'Unevaluated properties are not allowed'. Drop these bindings to mute these warning as they should not be there from the start. Cc: Jonathan McDowell <noodles@earth.li> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Jonathan McDowell <noodles@earth.li> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19dt-bindings: net: dsa: qca8k: add LEDs definition exampleChristian Marangi
Add LEDs definition example for qca8k Switch Family to describe how they should be defined for a correct usage. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19dt-bindings: net: ethernet-controller: Document support for LEDs nodeChristian Marangi
Document support for LEDs node in ethernet-controller. Ethernet Controller may support different LEDs that can be configured for different operation like blinking on traffic event or port link. Also add some Documentation to describe the difference of these nodes compared to PHY LEDs, since ethernet-controller LEDs are controllable by the ethernet controller regs and the possible intergated PHY doesn't have control on them. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: phy: marvell: Implement led_blink_set()Andrew Lunn
The Marvell PHY can blink the LEDs, simple on/off. All LEDs blink at the same rate, and the reset default is 84ms per blink, which is around 12Hz. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: phy: phy_device: Call into the PHY driver to set LED blinkingAndrew Lunn
Linux LEDs can be requested to perform hardware accelerated blinking. Pass this to the PHY driver, if it implements the op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: phy: marvell: Add software control of the LEDsAndrew Lunn
Add a brightness function, so the LEDs can be controlled from software using the standard Linux LED infrastructure. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: phy: phy_device: Call into the PHY driver to set LED brightnessAndrew Lunn
Linux LEDs can be software controlled via the brightness file in /sys. LED drivers need to implement a brightness_set function which the core will call. Implement an intermediary in phy_device, which will call into the phy driver if it implements the necessary function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: phy: Add a binding for PHY LEDsAndrew Lunn
Define common binding parsing for all PHY drivers with LEDs using phylib. Parse the DT as part of the phy_probe and add LEDs to the linux LED class infrastructure. For the moment, provide a dummy brightness function, which will later be replaced with a call into the PHY driver. This allows testing since the LED core might otherwise reject an LED whose brightness cannot be set. Add a dependency on LED_CLASS. It either needs to be built in, or not enabled, since a modular build can result in linker errors. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19leds: Provide stubs for when CLASS_LED & NEW_LEDS are disabledAndrew Lunn
Provide stubs for devm_led_classdev_register_ext() and led_init_default_state_get() so that LED drivers embedded within other drivers such as PHYs and Ethernet switches still build when LEDS_CLASS or NEW_LEDS are disabled. This also helps with Kconfig dependencies, which are somewhat hairy for phylib and mdio and only get worse when adding a dependency on LED_CLASS. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: dsa: qca8k: add LEDs blink_set() supportChristian Marangi
Add LEDs blink_set() support to qca8k Switch Family. These LEDs support hw accellerated blinking at a fixed rate of 4Hz. Reject any other value since not supported by the LEDs switch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: dsa: qca8k: add LEDs basic supportChristian Marangi
Add LEDs basic support for qca8k Switch Family by adding basic brightness_set() support. Since these LEDs refelect port status, the default label is set to ":port". DT binding should describe the color and function of the LEDs using standard LEDs api. Each LED always have the device name as prefix. The device name is composed from the mii bus id and the PHY addr resulting in example names like: - qca8k-0.0:00:amber:lan - qca8k-0.0:00:white:lan - qca8k-0.0:01:amber:lan - qca8k-0.0:01:white:lan These LEDs supports only blocking variant of the brightness_set() function since they can sleep during access of the switch leds to set the brightness. While at it add to the qca8k header file each mode defined by the Switch Documentation for future use. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: dsa: qca8k: move qca8k_port_to_phy() to headerChristian Marangi
Move qca8k_port_to_phy() to qca8k header as it's useful for future reference in Switch LEDs module since the same logic is applied to get the right index of the switch port. Make it inline as it's simple function that just decrease the port. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: wwan: Expose secondary AT port on DATA1Jaime Breva
Our use-case needs two AT ports available: One for running a ppp daemon, and another one for management This patch enables a second AT port on DATA1 Signed-off-by: Jaime Breva <jbreva@nayarsystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19wifi: mt76: mt7996: fill txd by host driverRyder Lee
The hardware SDO has issue to fill txd for the moment, so fallback to driver filling method. Fixes: 98686cd21624 (wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 on supported driversFelix Fietkau
Drivers that do not generate IV/PN in software can safely rekey PTK0 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: dma: use napi_build_skbFelix Fietkau
Improves performance by using bulk allocation Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7615: increase eeprom size for mt7663Felix Fietkau
mt7663 efuse has 0x600 bytes instead of 0x400. Increase the size in order to fix issues with incomplete calibration data Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu supportRyder Lee
This enables HW offloading amsdu/de-amsdu support for 802.11s mesh interface. Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable configured beacon tx rateRyder Lee
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_MCAST_RATE supportRyder Lee
Similar to BSS_CHANGED_BASIC_RATES, this enables mcast rate configuration through fixed rate tables. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Change-Id: Ifc305e8c7de9a7df4ad5f856e2097d721a886aaa Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES supportRyder Lee
The connac3 removes fixed rate fields to reduce txd size and introduces global rate tables (64 entries) for rate setting. Driver needs to fill the corresponding idx in MT_TXD6_TX_RATE while tx, and push mt76_rate into predifined table at bootup stage so that mvif->basic_rates_idx can immediately switch out once setting changes. spe_idx is also needed for fixed rate frames, and will be updated by future patches. Note that all table entries are shared across driver and firmware (i.e.TxBF), hence adding MT7996_BASIC_RATES_TBL to reflect mapping status. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19Merge branch 'mptcp-fixes'David S. Miller
Matthieu Baerts says: ==================== mptcp: fixes around listening sockets and the MPTCP worker Christoph Paasch reported a couple of issues found by syzkaller and linked to operations done by the MPTCP worker on (un)accepted sockets. Fixing these issues was not obvious and rather complex but Paolo Abeni nicely managed to propose these excellent patches that seem to satisfy syzkaller. Patch 1 partially reverts a recent fix but while still providing a solution for the previous issue, it also prevents the MPTCP worker from running concurrently with inet_csk_listen_stop(). A warning is then avoided. The partially reverted patch has been introduced in v6.3-rc3, backported up to v6.1 and fixing an issue visible from v5.18. Patch 2 prevents the MPTCP worker to race with mptcp_accept() causing a UaF when a fallback to TCP is done while in parallel, the socket is being accepted by the userspace. This is also a fix of a previous fix introduced in v6.3-rc3, backported up to v6.1 but here fixing an issue that is in theory there from v5.7. There is no need to backport it up to here as it looks like it is only visible later, around v5.18, see the previous cover-letter linked to this original fix. ==================== Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
2023-04-19mptcp: fix accept vs worker racePaolo Abeni
The mptcp worker and mptcp_accept() can race, as reported by Christoph: refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 14351 at lib/refcount.c:25 refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25 Modules linked in: CPU: 1 PID: 14351 Comm: syz-executor.2 Not tainted 6.3.0-rc1-gde5e8fd0123c #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25 Code: 02 31 ff 89 de e8 1b f0 a7 ff 84 db 0f 85 6e ff ff ff e8 3e f5 a7 ff 48 c7 c7 d8 c7 34 83 c6 05 6d 2d 0f 02 01 e8 cb 3d 90 ff <0f> 0b e9 4f ff ff ff e8 1f f5 a7 ff 0f b6 1d 54 2d 0f 02 31 ff 89 RSP: 0018:ffffc90000a47bf8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802eae98c0 RSI: ffffffff81097d4f RDI: 0000000000000001 RBP: ffff88802e712180 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffff88802eaea148 R12: ffff88802e712100 R13: ffff88802e712a88 R14: ffff888005cb93a8 R15: ffff88802e712a88 FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f277fd89120 CR3: 0000000035486002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __refcount_add include/linux/refcount.h:199 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] sock_hold include/net/sock.h:775 [inline] __mptcp_close+0x4c6/0x4d0 net/mptcp/protocol.c:3051 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072 inet_release+0x56/0xa0 net/ipv4/af_inet.c:429 __sock_release+0x51/0xf0 net/socket.c:653 sock_close+0x18/0x20 net/socket.c:1395 __fput+0x113/0x430 fs/file_table.c:321 task_work_run+0x96/0x100 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x4fc/0x10c0 kernel/exit.c:869 do_group_exit+0x51/0xf0 kernel/exit.c:1019 get_signal+0x12b0/0x1390 kernel/signal.c:2859 arch_do_signal_or_restart+0x25/0x260 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x131/0x1a0 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x19/0x40 kernel/entry/common.c:296 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fec4b4926a9 Code: Unable to access opcode bytes at 0x7fec4b49267f. RSP: 002b:00007fec49f9dd78 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00000000006bc058 RCX: 00007fec4b4926a9 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006bc058 RBP: 00000000006bc050 R08: 00000000007df998 R09: 00000000007df998 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 000000000000000b R15: 000000000001fe40 </TASK> The root cause is that the worker can force fallback to TCP the first mptcp subflow, actually deleting the unaccepted msk socket. We can explicitly prevent the race delaying the unaccepted msk deletion at listener shutdown time. In case the closed subflow is later accepted, just drop the mptcp context and let the user-space deal with the paired mptcp socket. Fixes: b6985b9b8295 ("mptcp: use the workqueue to destroy unaccepted sockets") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/375 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19mptcp: stops worker on unaccepted sockets at listener closePaolo Abeni
This is a partial revert of the blamed commit, with a relevant change: mptcp_subflow_queue_clean() now just change the msk socket status and stop the worker, so that the UaF issue addressed by the blamed commit is not re-introduced. The above prevents the mptcp worker from running concurrently with inet_csk_listen_stop(), as such race would trigger a warning, as reported by Christoph: RSP: 002b:00007f784fe09cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e WARNING: CPU: 0 PID: 25807 at net/ipv4/inet_connection_sock.c:1387 inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387 RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f7850afd6a9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000004 Modules linked in: RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40 </TASK> CPU: 0 PID: 25807 Comm: syz-executor.7 Not tainted 6.2.0-g778e54711659 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387 RAX: 0000000000000000 RBX: ffff888100dfbd40 RCX: 0000000000000000 RDX: ffff8881363aab80 RSI: ffffffff81c494f4 RDI: 0000000000000005 RBP: ffff888126dad080 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888100dfe040 R13: 0000000000000001 R14: 0000000000000000 R15: ffff888100dfbdd8 FS: 00007f7850a2c800(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32d26000 CR3: 000000012fdd8006 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __tcp_close+0x5b2/0x620 net/ipv4/tcp.c:2875 __mptcp_close_ssk+0x145/0x3d0 net/mptcp/protocol.c:2427 mptcp_destroy_common+0x8a/0x1c0 net/mptcp/protocol.c:3277 mptcp_destroy+0x41/0x60 net/mptcp/protocol.c:3304 __mptcp_destroy_sock+0x56/0x140 net/mptcp/protocol.c:2965 __mptcp_close+0x38f/0x4a0 net/mptcp/protocol.c:3057 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072 inet_release+0x53/0xa0 net/ipv4/af_inet.c:429 __sock_release+0x4e/0xf0 net/socket.c:651 sock_close+0x15/0x20 net/socket.c:1393 __fput+0xff/0x420 fs/file_table.c:321 task_work_run+0x8b/0xe0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x40 kernel/entry/common.c:296 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f7850af70dc RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7850af70dc RDX: 00007f7850a2c800 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 00000000006bd980 R08: 0000000000000000 R09: 00000000000018a0 R10: 00000000316338a4 R11: 0000000000000293 R12: 0000000000211e31 R13: 00000000006bc05c R14: 00007f785062c000 R15: 0000000000211af0 Fixes: 0a3f4f1f9c27 ("mptcp: fix UaF in listener shutdown") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/371 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: rpl: fix rpl header size calculationAlexander Aring
This patch fixes a missing 8 byte for the header size calculation. The ipv6_rpl_srh_size() is used to check a skb_pull() on skb->data which points to skb_transport_header(). Currently we only check on the calculated addresses fields using CmprI and CmprE fields, see: https://www.rfc-editor.org/rfc/rfc6554#section-3 there is however a missing 8 byte inside the calculation which stands for the fields before the addresses field. Those 8 bytes are represented by sizeof(struct ipv6_rpl_sr_hdr) expression. Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr") Signed-off-by: Alexander Aring <aahringo@redhat.com> Reported-by: maxpl0it <maxpl0it@protonmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()Seiji Nishikawa
When vmxnet3_rq_create() fails to allocate rq->data_ring.base due to page allocation failure, subsequent call to vmxnet3_rq_rx_complete() can result in NULL pointer dereference. To fix this bug, check not only that rxDataRingUsed is true but also that adapter->rxdataring_enabled is true before calling memcpy() in vmxnet3_rq_rx_complete(). [1728352.477993] ethtool: page allocation failure: order:9, mode:0x6000c0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0 ... [1728352.478009] Call Trace: [1728352.478028] dump_stack+0x41/0x60 [1728352.478035] warn_alloc.cold.120+0x7b/0x11b [1728352.478038] ? _cond_resched+0x15/0x30 [1728352.478042] ? __alloc_pages_direct_compact+0x15f/0x170 [1728352.478043] __alloc_pages_slowpath+0xcd3/0xd10 [1728352.478047] __alloc_pages_nodemask+0x2e2/0x320 [1728352.478049] __dma_direct_alloc_pages.constprop.25+0x8a/0x120 [1728352.478053] dma_direct_alloc+0x5a/0x2a0 [1728352.478056] vmxnet3_rq_create.part.57+0x17c/0x1f0 [vmxnet3] ... [1728352.478188] vmxnet3 0000:0b:00.0 ens192: rx data ring will be disabled ... [1728352.515347] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 ... [1728352.515440] RIP: 0010:memcpy_orig+0x54/0x130 ... [1728352.515655] Call Trace: [1728352.515665] <IRQ> [1728352.515672] vmxnet3_rq_rx_complete+0x419/0xef0 [vmxnet3] [1728352.515690] vmxnet3_poll_rx_only+0x31/0xa0 [vmxnet3] ... Signed-off-by: Seiji Nishikawa <snishika@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19Merge branch 'mlx5e-xdp-extend'David S. Miller
Tariq Toukan says: ==================== net/mlx5e: Extend XDP multi-buffer capabilities This series extends the XDP multi-buffer support in the mlx5e driver. Patchset breakdown: - Infrastructural changes and preparations. - Add XDP multi-buffer support for XDP redirect-in. - Use TX MPWQE (multi-packet WQE) HW feature for non-linear single-segmented XDP frames. - Add XDP multi-buffer support for striding RQ. In Striding RQ, we overcome the lack of headroom and tailroom between the RQ strides by allocating a side page per packet and using it for the xdp_buff descriptor. We structure the xdp_buff so that it contains nothing in the linear part, and the whole packet resides in the fragments. Performance highlight: Packet rate test, 64 bytes, 32 channels, MTU 9000 bytes. CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz. NIC: ConnectX-6 Dx, at 100 Gbps. +----------+-------------+-------------+---------+ | Test | Legacy RQ | Striding RQ | Speedup | +----------+-------------+-------------+---------+ | XDP_DROP | 101,615,544 | 117,191,020 | +15% | +----------+-------------+-------------+---------+ | XDP_TX | 95,608,169 | 117,043,422 | +22% | +----------+-------------+-------------+---------+ Series generated against net commit: e61caf04b9f8 Merge branch 'page_pool-allow-caching-from-safely-localized-napi' I'm submitting this directly as Saeed is traveling. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: RX, Add XDP multi-buffer support in Striding RQTariq Toukan
Here we add support for multi-buffer XDP handling in Striding RQ, which is our default out-of-the-box RQ type. Before this series, loading such an XDP program would fail, until you switch to the legacy RQ (by unsetting the rx_striding_rq priv-flag). To overcome the lack of headroom and tailroom between the strides, we allocate a side page to be used for the descriptor (xdp_buff / skb) and the linear part. When an XDP program is attached, we structure the xdp_buff so that it contains no data in the linear part, and the whole packet resides in the fragments. In case of XDP_PASS, where an SKB still needs to be created, we copy up to 256 bytes to its linear part, to match the current behavior, and satisfy functions that assume finding the packet headers in the SKB linear part (like eth_type_trans). Performance testing: Packet rate test, 64 bytes, 32 channels, MTU 9000 bytes. CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz. NIC: ConnectX-6 Dx, at 100 Gbps. +----------+-------------+-------------+---------+ | Test | Legacy RQ | Striding RQ | Speedup | +----------+-------------+-------------+---------+ | XDP_DROP | 101,615,544 | 117,191,020 | +15% | +----------+-------------+-------------+---------+ | XDP_TX | 95,608,169 | 117,043,422 | +22% | +----------+-------------+-------------+---------+ Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: RX, Prepare non-linear striding RQ for XDP multi-buffer supportTariq Toukan
In preparation for supporting XDP multi-buffer in striding RQ, use xdp_buff struct to describe the packet. Make its skb_shared_info collide the one of the allocated SKB, then add the fragments using the xdp_buff API. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 21:04:27 +0000