summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-17clk: ti: add support for basic mux clockTero Kristo
ti,mux-clock provides now a binding for basic mux support. This is just using the basic clock type. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17CLK: TI: add support for clockdomain bindingTero Kristo
Some OMAP clocks require knowledge about their parent clockdomain for book keeping purposes. This patch creates a new DT binding for TI clockdomains, which act as a collection of device clocks. Clockdomain itself is rather misleading name for the hardware functionality, as at least on OMAP4 / OMAP5 / DRA7 the clockdomains can be collections of either clocks and/or IP blocks, thus idle-domain or such might be more appropriate. For most cases on these SoCs, the kernel doesn't even need the information and the mappings can be ignored. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17CLK: TI: add support for gate clockTero Kristo
This patch adds support for TI specific gate clocks. These behave as basic gate-clock, but have different ops / hw-ops for controlling the actual gate, for example waiting until the clock is ready. Several sub-types are supported: - ti,gate-clock: basic gate clock with default ops/hwops - ti,clkdm-gate-clock: clockdomain level gate control - ti,dss-gate-clock: gate clock with DSS specific hardware handling - ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling - ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17clk: ti: add support for TI fixed factor clockTero Kristo
This behaves exactly in similar manner to basic fixed-factor-clock, but adds a few properties on top for handling clock hardware autoidling. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17CLK: ti: add support for ti divider-clockTero Kristo
This patch adds support for TI divider clock binding, which simply uses the basic clock divider to provide the features needed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17clk: ti: add composite clock supportTero Kristo
This is a multipurpose clock node, which contains support for multiple sub-clocks. Uses basic composite clock type to implement the actual functionality, and TI specific gate, mux and divider clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17CLK: TI: add autoidle supportTero Kristo
TI clk driver now routes some of the basic clocks through own registration routine to allow autoidle support. This routine just checks a couple of device node properties and adds autoidle support if required, and just passes the registration forward to basic clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17CLK: TI: Add DPLL clock supportTero Kristo
The OMAP clock driver now supports DPLL clock type. This patch also adds support for DT DPLL nodes. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17CLK: ti: add init support for clock IP blocksTero Kristo
ti_dt_clk_init_provider() can now be used to initialize the contents of a single clock IP block. This parses all the clocks under the IP block and calls the corresponding init function for them. This patch also introduces a helper function for the TI clock drivers to get register info from DT and append the master IP info to this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17CLK: TI: add DT alias clock registration mechanismTero Kristo
Some devices require their clocks to be available with a specific dev-id con-id mapping. With DT, the clocks can be found by default only with their name, or alternatively through the device node of the consumer. With drivers, that don't support DT fully yet, add mechanism to register specific clock names. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17ARM: DRA7XX: Add support for DRA7XX only buildTero Kristo
SOC_DRA7XX was under wrong menu within Kconfig file, which prevented DRA7XX only build. Fixed the kconfig options for this SoC as we are there. voltage.c needs to be added to the DRA7XX build also, otherwise DRA7XX only build will fail. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17ARM: DRA7XX/AM43XX: randconfig fixesTero Kristo
DRA7XX and AM43XX were missing common clock code from the Makefile, which causes build breakage in DRA7XX / AM43XX only builds once clock support for these SoCs is added. Add the missing entries to the Makefile as preparation of this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17kernfs: associate a new kernfs_node with its parent on creationTejun Heo
Once created, a kernfs_node is always destroyed by kernfs_put(). Since ba7443bc656e ("sysfs, kernfs: implement kernfs_create/destroy_root()"), kernfs_put() depends on kernfs_root() to locate the ino_ida. kernfs_root() in turn depends on kernfs_node->parent being set for !dir nodes. This means that kernfs_put() of a !dir node requires its ->parent to be initialized. This leads to oops when a newly created !dir node is destroyed without going through kernfs_add_one() or after failing kernfs_add_one() before ->parent is set. kernfs_root() invoked from kernfs_put() will try to dereference NULL parent. Fix it by moving parent association to kernfs_new_node() from kernfs_add_one(). kernfs_new_node() now takes @parent instead of @root and determines the root from the parent and also sets the new node's parent properly. @parent parameter is removed from kernfs_add_one(). As there's no parent when creating the root node, __kernfs_new_node() which takes @root as before and doesn't set the parent is used in that case. This ensures that a kernfs_node in any stage in its life has its parent associated and thus can be put. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-17kernfs: add struct dentry declaration in kernfs.hTejun Heo
Hello, Greg. Two misc fixes for kernfs. Thanks. ------- 8< ------- struct dentry is used in kernfs.h but its declaration was missing, leading to compilation errors unless its declaration gets pulled in in some other way. Add the declaration. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-01-17x86, mpx: Add MPX related opcodes to the x86 opcode mapQiaowei Ren
This patch adds all the MPX instructions to x86 opcode map, so the x86 instruction decoder can decode MPX instructions. Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com> Link: http://lkml.kernel.org/r/1389518403-7715-4-git-send-email-qiaowei.ren@intel.com Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-17ASoC: dapm: Fix double prefix additionArun Shamanna Lakshmi
The prefix for the codec driver can be used during dual identical codec usecases. However, dapm adds prefix twice for codec DAI widget in snd_soc_dapm_add_route API. This change is to avoid double prefix addition for codec DAI widget and is needed while using identical dual codecs. Signed-off-by: Songhee Baek <sbaek@nvidia.com> Signed-off-by: Arun Shamanna Lakshmi <aruns@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-17ASoC: compress: Add suport for DPCM into compressed audioLiam Girdwood
Currently compressed audio streams are statically routed from the /dev to the DAI link. Some DSPs can route compressed data to multiple BE DAIs like they do for PCM data. Add support to allow dynamically routed compressed streams using the existing DPCM infrastructure. This patch adds special FE versions of the compressed ops that work out the runtime routing. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-17ASoC: DPCM: make some DPCM API calls non static for compressed usageLiam Girdwood
The ASoC compressed code needs to call the internal DPCM APIs in order to dynamically route compressed data to different DAIs. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-17spi: sc18is602: Convert to use bits_per_word_maskAxel Lin
Since commit 543bb25 "spi: add ability to validate xfer->bits_per_word in SPI core", the driver can set bits_per_word_mask for the master then the SPI core will reject transfers that attempt to use an unsupported bits_per_word value. So we can remove the bits_per_word checking in sc18is602_check_transfer() and let SPI core handle the checking. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-17spi: Remove duplicate code to set default bits_per_word settingAxel Lin
The implementation in spi_setup() already set spi->bits_per_word = 8 when spi->bits_per_word is 0 before calling spi->master->setup. So we don't need to do it again in setup() callback. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Barry Song <Baohua.Song@csr.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-17Merge branches 'topic/sc18is602' and 'topic/rspi' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-bpw
2014-01-17gpio: mcp23s08: Add irq functionality for i2c chipsLars Poeschel
This adds interrupt functionality for i2c chips to the driver. They can act as a interrupt-controller and generate interrupts, if the inputs change. This is tested with a mcp23017 chip on an arm based platform. v3: - be a bit more clear that the irq functionality is also available on spi versions of the chips, but the linux driver does not support this yet v2: - some more word about irq-mirror property in binding doc - use of_read_bool instead of of_find_property for "interrupt-contrller" and "irq-mirror" - cache the "interrupt-controller" for remove function - do set the irq-mirror bit only if device is marked as interrupt-controller - do create the irq mapping and setup of irq_desc of all possible interrupts in probe path instead of in gpio_to_irq - mark gpios as in use as interrupts in irq in irq_startup and unlock it in irq_shutdown - rename virq to child_irq - remove dev argument from mcp23s08_irq_setup function - move gpiochip_add before mcp23s08_irq_setup in probe path Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-17perf tools: Remove unnecessary callchain cursor state restore on unmatchFrederic Weisbecker
If a new callchain branch doesn't match a single entry of the node that it is given against comparison in append_chain(), then the cursor is expected to be at the same position as it was before the comparison loop. As such, there is no need to restore the cursor position on exit in case of non matching branches. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1389713836-13375-4-git-send-email-fweisbec@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-17mmc: dw_mmc: fix dw_mci_get_cdZhangfei Gao
bf626e5550f24aec ("mmc: dw_mmc: use slot-gpio to handle cd pin") caused CDETECT to be ignored, since negated return value of mmc_gpio_get_cd(mmc) can not be checked by IS_ERR_VALUE. Also, add spin_lock_bh(&host->lock) for atomic access to DW_MMC_CARD_PRESENT, otherwise sd detect may occasionally fail. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Reported-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> Tested-by: Sachin Kamat <sachin.kamat@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-01-17perf callchain: Spare double comparison of callchain first entryFrederic Weisbecker
When a new callchain child branch matches an existing one in the rbtree, the comparison of its first entry is performed twice: 1) From append_chain_children() on branch lookup 2) If 1) reports a match, append_chain() then compares all entries of the new branch against the matching node in the rbtree, and this comparison includes the first entry of the new branch again. Lets shortcut this by performing the whole comparison only from append_chain() which then returns the result of the comparison between the first entry of the new branch and the iterating node in the rbtree. If the first entry matches, the lookup on the current level of siblings stops and propagates to the children of the matching nodes. This results in less comparisons performed by the CPU. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1389713836-13375-3-git-send-email-fweisbec@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-17floppy: bail out in open() if drive is not responding to block0 readJiri Kosina
In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-17HID: sony: Map gyroscopes and accelerometers to axesFrank Praznik
Use a modified HID descriptor for the Dualshock 4 to assign the gyroscope sensors and accelerometers to axes. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-17HID: sony: Fix spacing in the device definitions.Frank Praznik
Fix cosmetic spacing in the device definitions. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-17HID: sony: Use standard output reports instead of raw reports to send data ↵Frank Praznik
to the Dualshock 4. Use regular HID output reports instead of raw reports in the dualshock4_state_worker function. (Thanks Simon Mungewell) Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-17HID: sony: Use separate identifiers for USB and Bluetooth connected ↵Frank Praznik
Dualshock 4 controllers. Use separate identifiers for Dualshock 4 controllers connected via USB and Bluetooth. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-17KVM: nVMX: Update guest activity state field on L2 exitsJan Kiszka
Set guest activity state in L1's VMCS according to the VCPUs mp_state. This ensures we report the correct state in case we L2 executed HLT or if we put L2 into HLT state and it was now woken up by an event. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-17KVM: nVMX: Fix nested_run_pending on activity state HLTJan Kiszka
When we suspend the guest in HLT state, the nested run is no longer pending - we emulated it completely. So only set nested_run_pending after checking the activity state. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-17KVM: nVMX: Clean up handling of VMX-related MSRsJan Kiszka
This simplifies the code and also stops issuing warning about writing to unhandled MSRs when VMX is disabled or the Feature Control MSR is locked - we do handle them all according to the spec. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-17KVM: nVMX: Add tracepoints for nested_vmexit and nested_vmexit_injectJan Kiszka
Already used by nested SVM for tracing nested vmexit: kvm_nested_vmexit marks exits from L2 to L0 while kvm_nested_vmexit_inject marks vmexits that are reflected to L1. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-17KVM: nVMX: Pass vmexit parameters to nested_vmx_vmexitJan Kiszka
Instead of fixing up the vmcs12 after the nested vmexit, pass key parameters already when calling nested_vmx_vmexit. This will help tracing those vmexits. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-17KVM: nVMX: Leave VMX mode on clearing of feature control MSRJan Kiszka
When userspace sets MSR_IA32_FEATURE_CONTROL to 0, make sure we leave root and non-root mode, fully disabling VMX. The register state of the VCPU is undefined after this step, so userspace has to set it to a proper state afterward. This enables to reboot a VM while it is running some hypervisor code. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-17KVM: VMX: Fix DR6 update on #DB exceptionJan Kiszka
According to the SDM, only bits 0-3 of DR6 "may" be cleared by "certain" debug exception. So do update them on #DB exception in KVM, but leave the rest alone, only setting BD and BS in addition to already set bits in DR6. This also aligns us with kvm_vcpu_check_singlestep. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-17KVM: SVM: Fix reading of DR6Jan Kiszka
In contrast to VMX, SVM dose not automatically transfer DR6 into the VCPU's arch.dr6. So if we face a DR6 read, we must consult a new vendor hook to obtain the current value. And as SVM now picks the DR6 state from its VMCB, we also need a set callback in order to write updates of DR6 back. Fixes a regression of 020df0794f. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-17KVM: x86: Sync DR7 on KVM_SET_DEBUGREGSJan Kiszka
Whenever we change arch.dr7, we also have to call kvm_update_dr7. In case guest debugging is off, this will synchronize the new state into hardware. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-17add support for Hyper-V reference time counterVadim Rozenfeld
Signed-off: Peter Lieven <pl@kamp.de> Signed-off: Gleb Natapov Signed-off: Vadim Rozenfeld <vrozenfe@redhat.com> After some consideration I decided to submit only Hyper-V reference counters support this time. I will submit iTSC support as a separate patch as soon as it is ready. v1 -> v2 1. mark TSC page dirty as suggested by Eric Northup <digitaleric@google.com> and Gleb 2. disable local irq when calling get_kernel_ns, as it was done by Peter Lieven <pl@amp.de> 3. move check for TSC page enable from second patch to this one. v3 -> v4     Get rid of ref counter offset. v4 -> v5 replace __copy_to_user with kvm_write_guest when updateing iTSC page. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-17i810: delete useless variableJulia Lawall
Delete a variable that is at most only assigned to a constant, but never used otherwise. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; identifier i; constant c; @@ -T i; <... when != i -i = c; ...> // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: add OpenCores VGA/LCD framebuffer driverStefan Kristiansson
This adds support for the VGA/LCD core available from OpenCores: http://opencores.org/project,vga_lcd The driver have been tested together with both OpenRISC and ARM (socfpga) processors. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video/logo: Remove MIPS-specific include sectionGeert Uytterhoeven
Since commit 41702d9a4fffa9e25b2ad9d4af09b3013fa155e1 ("logo.c: get rid of mips_machgroup") there's no longer a need to include <asm/bootinfo.h> on MIPS. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17tgafb: potential NULL dereference in initDan Carpenter
Static checkers complain that there are paths where "tga_type_name" can be NULL. I've re-arranged the code slightly so that's impossible. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: mmp: Using plain integer as NULL pointerDan Carpenter
Sparse complains here: drivers/video/mmp/core.c:33:16: warning: Using plain integer as NULL pointer Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: mmp: delete a stray mutex_unlock()Dan Carpenter
We aren't holding the disp_lock so we shouldn't release it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: amba-clcd: Make CLCD driver available on more platformsMark Brown
The CLCD driver is used on ARM reference models for ARMv8 so add ARM64 to the list of dependencies. The driver also has no build time dependencies on ARM (stubs are provided for ARM-specific DMA functions in the code) so make it available with COMPILE_TEST in order to maximise build coverage. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17video: Replace local macro with PCI standard macroYijing Wang
Replace local macro TGA_BUS_PCI with PCI standard marco dev_is_pci(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-17fbmem: really support wildcard video=options for all fbdev driversOlaf Hering
Documentation/fb/modedb.txt states that video=option should be considered a global option. But video_setup and fb_get_options are not coded that way. Instead its required to boot with video=driver:option to set a given option in drvier. This is cumbersome because it requires to know in advance which driver will be active for a given board/kernel. The following patch implements the documented catchall for the fbdev drivers. It is now possible to boot with video=XxY without the need to know the active driver in advance. The specific case it tries to fix is syslinux in the SUSE installer which offers a menu to set a display resolution. Right now this just appends the vga= option the kernel. But in addition to vga= it should be possible to pass a generic video=XxY for all framebuffer/drm drivers. With this change forcing a certain window size of VM displays is now much easier. Today the video= option is stored in a global fb_mode_option. But unfortunately only drm uses it. Note: this change introduces a small memleak if video=option is actually used because fb_mode_option is const. Most drivers use strsep to get to individual options. This could be fixed in a followup patch which always releases the option string in every caller of fb_get_options. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
generated by cgit (git 2.34.1) at 2025-09-19 16:48:02 +0000