| Age | Commit message (Collapse) | Author |
|---|
|
DMA complete & stop paths did not correctly account Tx'ed characters
into icount.tx. Using uart_xmit_advance() fixes the problem.
Fixes: e9ea096dd225 ("serial: tegra: add serial driver")
Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance()
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A very common pattern in the drivers is to advance xmit tail
index and do bookkeeping of Tx'ed characters. Create
uart_xmit_advance() to handle it.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some DWC3 controllers (e.g. Rockchip SoCs), the DWC3 core
doesn't support 64-bit DMA address width. In this case, this
driver should use the default 32-bit mask. Otherwise, the DWC3
controller will break if it runs on above 4GB physical memory
environment.
This patch reads the DWC_USB3_AWIDTH bits of GHWPARAMS0 which
used for the DMA address width, and only configure 64-bit DMA
mask if the DWC_USB3_AWIDTH is 64.
Fixes: 45d39448b4d0 ("usb: dwc3: support 64 bit DMA in platform driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/20220901083446.3799754-1-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Even if max hash configured in hw in mtk_ppe_hash_entry is
MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in
mtk_ppe_check_skb routine
Fixes: c4f033d9e03e9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As Eric reported, the 'reason' field is not presented when trace the
kfree_skb event by perf:
$ perf record -e skb:kfree_skb -a sleep 10
$ perf script
ip_defrag 14605 [021] 221.614303: skb:kfree_skb:
skbaddr=0xffff9d2851242700 protocol=34525 location=0xffffffffa39346b1
reason:
The cause seems to be passing kernel address directly to TP_printk(),
which is not right. As the enum 'skb_drop_reason' is not exported to
user space through TRACE_DEFINE_ENUM(), perf can't get the drop reason
string from the 'reason' field, which is a number.
Therefore, we introduce the macro DEFINE_DROP_REASON(), which is used
to define the trace enum by TRACE_DEFINE_ENUM(). With the help of
DEFINE_DROP_REASON(), now we can remove the auto-generate that we
introduced in the commit ec43908dd556
("net: skb: use auto-generation to convert skb drop reason to string"),
and define the string array 'drop_reasons'.
Hmmmm...now we come back to the situation that have to maintain drop
reasons in both enum skb_drop_reason and DEFINE_DROP_REASON. But they
are both in dropreason.h, which makes it easier.
After this commit, now the format of kfree_skb is like this:
$ cat /tracing/events/skb/kfree_skb/format
name: kfree_skb
ID: 1524
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:void * skbaddr; offset:8; size:8; signed:0;
field:void * location; offset:16; size:8; signed:0;
field:unsigned short protocol; offset:24; size:2; signed:0;
field:enum skb_drop_reason reason; offset:28; size:4; signed:0;
print fmt: "skbaddr=%p protocol=%u location=%p reason: %s", REC->skbaddr, REC->protocol, REC->location, __print_symbolic(REC->reason, { 1, "NOT_SPECIFIED" }, { 2, "NO_SOCKET" } ......
Fixes: ec43908dd556 ("net: skb: use auto-generation to convert skb drop reason to string")
Link: https://lore.kernel.org/netdev/CANn89i+bx0ybvE55iMYf5GJM48WwV1HNpdm9Q6t-HaEstqpCSA@mail.gmail.com/
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine.
Fixes: 33fc42de33278 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nf_osf_find() incorrectly returns true on mismatch, this leads to
copying uninitialized memory area in nft_osf which can be used to leak
stale kernel stack data to userspace.
Fixes: 22c7652cdaa8 ("netfilter: nft_osf: Add version option support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
CTCP messages should only be at the start of an IRC message, not
anywhere within it.
While the helper only decodes packes in the ORIGINAL direction, its
possible to make a client send a CTCP message back by empedding one into
a PING request. As-is, thats enough to make the helper believe that it
saw a CTCP message.
Fixes: 869f37d8e48f ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Commit e8ae0e140c05 ("vfio: Require that devices support DMA cache
coherence") requires IOMMU drivers to advertise
IOMMU_CAP_CACHE_COHERENCY, in order to be used by VFIO. Since VFIO does
not provide to userspace the ability to maintain coherency through cache
invalidations, it requires hardware coherency. Advertise the capability
in order to restore VFIO support.
The meaning of IOMMU_CAP_CACHE_COHERENCY also changed from "IOMMU can
enforce cache coherent DMA transactions" to "IOMMU_CACHE is supported".
While virtio-iommu cannot enforce coherency (of PCIe no-snoop
transactions), it does support IOMMU_CACHE.
We can distinguish different cases of non-coherent DMA:
(1) When accesses from a hardware endpoint are not coherent. The host
would describe such a device using firmware methods ('dma-coherent'
in device-tree, '_CCA' in ACPI), since they are also needed without
a vIOMMU. In this case mappings are created without IOMMU_CACHE.
virtio-iommu doesn't need any additional support. It sends the same
requests as for coherent devices.
(2) When the physical IOMMU supports non-cacheable mappings. Supporting
those would require a new feature in virtio-iommu, new PROBE request
property and MAP flags. Device drivers would use a new API to
discover this since it depends on the architecture and the physical
IOMMU.
(3) When the hardware supports PCIe no-snoop. It is possible for
assigned PCIe devices to issue no-snoop transactions, and the
virtio-iommu specification is lacking any mention of this.
Arm platforms don't necessarily support no-snoop, and those that do
cannot enforce coherency of no-snoop transactions. Device drivers
must be careful about assuming that no-snoop transactions won't end
up cached; see commit e02f5c1bb228 ("drm: disable uncached DMA
optimization for ARM and arm64"). On x86 platforms, the host may or
may not enforce coherency of no-snoop transactions with the physical
IOMMU. But according to the above commit, on x86 a driver which
assumes that no-snoop DMA is compatible with uncached CPU mappings
will also work if the host enforces coherency.
Although these issues are not specific to virtio-iommu, it could be
used to facilitate discovery and configuration of no-snoop. This
would require a new feature bit, PROBE property and ATTACH/MAP
flags.
Cc: stable@vger.kernel.org
Fixes: e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220825154622.86759-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
With CONFIG_INTEL_IOMMU_DEBUGFS enabled, below lockdep splat are seen
when an I/O fault occurs on a machine with an Intel IOMMU in it.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:1a.0] fault addr 0x0
[fault reason 0x05] PTE Write access is not set
DMAR: Dump dmar0 table entries for IOVA 0x0
DMAR: root entry: 0x0000000127f42001
DMAR: context entry: hi 0x0000000000001502, low 0x000000012d8ab001
================================
WARNING: inconsistent lock state
5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
rngd/1006 [HC1[1]:SC0[0]:HE0:SE1] takes:
ff177021416f2d78 (&k->k_lock){?.+.}-{2:2}, at: klist_next+0x1b/0x160
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0xce/0x2d0
_raw_spin_lock+0x33/0x80
klist_add_tail+0x46/0x80
bus_add_device+0xee/0x150
device_add+0x39d/0x9a0
add_memory_block+0x108/0x1d0
memory_dev_init+0xe1/0x117
driver_init+0x43/0x4d
kernel_init_freeable+0x1c2/0x2cc
kernel_init+0x16/0x140
ret_from_fork+0x1f/0x30
irq event stamp: 7812
hardirqs last enabled at (7811): [<ffffffff85000e86>] asm_sysvec_apic_timer_interrupt+0x16/0x20
hardirqs last disabled at (7812): [<ffffffff84f16894>] irqentry_enter+0x54/0x60
softirqs last enabled at (7794): [<ffffffff840ff669>] __irq_exit_rcu+0xf9/0x170
softirqs last disabled at (7787): [<ffffffff840ff669>] __irq_exit_rcu+0xf9/0x170
The klist iterator functions using spin_*lock_irq*() but the klist
insertion functions using spin_*lock(), combined with the Intel DMAR
IOMMU driver iterating over klists from atomic (hardirq) context, where
pci_get_domain_bus_and_slot() calls into bus_find_device() which iterates
over klists.
As currently there's no plan to fix the klist to make it safe to use in
atomic context, this fixes the lockdep splat by avoid calling
pci_get_domain_bus_and_slot() in the hardirq context.
Fixes: 8ac0b64b9735 ("iommu/vt-d: Use pci_get_domain_bus_and_slot() in pgtable_walk()")
Reported-by: Lennert Buytenhek <buytenh@wantstofly.org>
Link: https://lore.kernel.org/linux-iommu/Yvo2dfpEh%2FWC+Wrr@wantstofly.org/
Link: https://lore.kernel.org/linux-iommu/YvyBdPwrTuHHbn5X@wantstofly.org/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220819015949.4795-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The per domain spinlock is acquired in iommu_flush_dev_iotlb(), which
is possbile to be called in the interrupt context. For example, the
drm-intel's CI system got completely blocked with below error:
WARNING: inconsistent lock state
6.0.0-rc1-CI_DRM_11990-g6590d43d39b9+ #1 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff88810440d678 (&domain->lock){+.?.}-{2:2}, at: iommu_flush_dev_iotlb.part.61+0x23/0x80
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0xd3/0x310
_raw_spin_lock+0x2a/0x40
domain_update_iommu_cap+0x20b/0x2c0
intel_iommu_attach_device+0x5bd/0x860
__iommu_attach_device+0x18/0xe0
bus_iommu_probe+0x1f3/0x2d0
bus_set_iommu+0x82/0xd0
intel_iommu_init+0xe45/0x102a
pci_iommu_init+0x9/0x31
do_one_initcall+0x53/0x2f0
kernel_init_freeable+0x18f/0x1e1
kernel_init+0x11/0x120
ret_from_fork+0x1f/0x30
irq event stamp: 162354
hardirqs last enabled at (162354): [<ffffffff81b59274>] _raw_spin_unlock_irqrestore+0x54/0x70
hardirqs last disabled at (162353): [<ffffffff81b5901b>] _raw_spin_lock_irqsave+0x4b/0x50
softirqs last enabled at (162338): [<ffffffff81e00323>] __do_softirq+0x323/0x48e
softirqs last disabled at (162349): [<ffffffff810c1588>] irq_exit_rcu+0xb8/0xe0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&domain->lock);
<Interrupt>
lock(&domain->lock);
*** DEADLOCK ***
1 lock held by swapper/6/0:
This coverts the spin_lock/unlock() into the irq save/restore varieties
to fix the recursive locking issues.
Fixes: ffd5869d93530 ("iommu/vt-d: Replace spin_lock_irqsave() with spin_lock()")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20220817025650.3253959-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The Intel IOMMU driver possibly selects between the first-level and the
second-level translation tables for DMA address translation. However,
the levels of page-table walks for the 4KB base page size are calculated
from the SAGAW field of the capability register, which is only valid for
the second-level page table. This causes the IOMMU driver to stop working
if the hardware (or the emulated IOMMU) advertises only first-level
translation capability and reports the SAGAW field as 0.
This solves the above problem by considering both the first level and the
second level when calculating the supported page table levels.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817023558.3253263-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The translation table copying code for kdump kernels is currently based
on the extended root/context entry formats of ECS mode defined in older
VT-d v2.5, and doesn't handle the scalable mode formats. This causes
the kexec capture kernel boot failure with DMAR faults if the IOMMU was
enabled in scalable mode by the previous kernel.
The ECS mode has already been deprecated by the VT-d spec since v3.0 and
Intel IOMMU driver doesn't support this mode as there's no real hardware
implementation. Hence this converts ECS checking in copying table code
into scalable mode.
The existing copying code consumes a bit in the context entry as a mark
of copied entry. It needs to work for the old format as well as for the
extended context entries. As it's hard to find such a common bit for both
legacy and scalable mode context entries. This replaces it with a per-
IOMMU bitmap.
Fixes: 7373a8cc38197 ("iommu/vt-d: Setup context and enable RID2PASID support")
Cc: stable@vger.kernel.org
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Wen Jin <wen.jin@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817011035.3250131-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
For irq_domain_associate() to work the virq descriptor has to be
pre-allocated in advance. Otherwise the following happens:
WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8
error: virq128 is not allocated
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1
...
Call Trace:
[<ffffffff801344c4>] show_stack+0x9c/0x130
[<ffffffff80769550>] dump_stack+0x90/0xd0
[<ffffffff801576d0>] __warn+0x118/0x130
[<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70
[<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8
[<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c
[<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388
[<ffffffff80a452cc>] init_IRQ+0x4c/0xf4
[<ffffffff80a3cc00>] start_kernel+0x404/0x698
Use irq_alloc_desc_at() to avoid the above problem.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
There are different flavors of 'nc' around, this script fails on
my test vm because 'nc' is 'nmap-ncat' which isn't 100% compatible.
Add socat support and use it if available.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
ct_sip_next_header and ct_sip_get_header return an absolute
value of matchoff, not a shift from current dataoff.
So dataoff should be assigned matchoff, not incremented by it.
This issue can be seen in the scenario when there are multiple
Contact headers and the first one is using a hostname and other headers
use IP addresses. In this case, ct_sip_walk_headers will work as follows:
The first ct_sip_get_header call to will find the first Contact header
but will return -1 as the header uses a hostname. But matchoff will
be changed to the offset of this header. After that, dataoff should be
set to matchoff, so that the next ct_sip_get_header call find the next
Contact header. But instead of assigning dataoff to matchoff, it is
incremented by it, which is not correct, as matchoff is an absolute
value of the offset. So on the next call to the ct_sip_get_header,
dataoff will be incorrect, and the next Contact header may not be
found at all.
Fixes: 05e3ced297fe ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Some of them were pointless because CONFIG_CAVIUM_RESERVE32 is now always
defined, some were not enough (Yu Zhao reported
"Failed to allocate CAVIUM_RESERVE32 memory area" error).
Removing the directives allows for compiler coverage of RESERVE32 code and
replacing one of [always-true] "ifdef" with a compiler conditional fixes
the [cosmetic] error message.
Fixes: 3e3114ac460e ("MIPS: Introduce CAVIUM_RESERVE32 Kconfig option")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Vladimir Oltean says:
====================
Fixes for Felix DSA driver calculation of tc-taprio guard bands
This series fixes some bugs which are not quite new, but date from v5.13
when static guard bands were enabled by Michael Walle to prevent
tc-taprio overruns.
The investigation started when Xiaoliang asked privately what is the
expected max SDU for a traffic class when its minimum gate interval is
10 us. The answer, as it turns out, is not an L1 size of 1250 octets,
but 1245 octets, since otherwise, the switch will not consider frames
for egress scheduling, because the static guard band is exactly as large
as the time interval. The switch needs a minimum of 33 ns outside of the
guard band to consider a frame for scheduling, and the reduction of the
max SDU by 5 provides exactly for that.
The fix for that (patch 1/3) is relatively small, but during testing, it
became apparent that cut-through forwarding prevents oversized frame
dropping from working properly. This is solved through the larger patch
2/3. Finally, patch 3/3 fixes one more tc-taprio locking problem found
through code inspection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vsc9959_sched_speed_set
The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set()
runs unlocked with respect to the other functions that access it, which
are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and
vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock,
so move the vsc9959_sched_speed_set() access under that lock as well, to
resolve the concurrency.
Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tc-taprio
Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605,
frames even way larger than 601 octets are transmitted even though these
should be considered as oversized, according to the documentation, and
dropped.
Since oversized frame dropping depends on frame size, which is only
known at the EOF stage, and therefore not at SOF when cut-through
forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_*
into consideration for traffic classes that are cut-through.
Since cut-through forwarding has no UAPI to control it, and the driver
enables it based on the mantra "if we can, then why not", the strategy
is to alter vsc9959_cut_through_fwd() to take into consideration which
tc's have oversize frame dropping enabled, and disable cut-through for
them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the
cut-through determination process.
There are 2 strategies for vsc9959_cut_through_fwd() to determine
whether a tc has oversized dropping enabled or not. One is to keep a bit
mask of traffic classes per port, and the other is to read back from the
hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the
feature is enabled). We choose reading back from registers, because
struct ocelot_port is shared with drivers (ocelot, seville) that don't
support either cut-through nor tc-taprio, and we don't have a felix
specific extension of struct ocelot_port. Furthermore, reading registers
from the Felix hardware is quite cheap, since they are memory-mapped.
Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
one packet
The blamed commit broke tc-taprio schedules such as this one:
tc qdisc replace dev $swp1 root taprio \
num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 \
sched-entry S 0x7f 990000 \
sched-entry S 0x80 10000 \
flags 0x2
because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard
band added earlier than its 'gate close' event, such that packet
overruns won't occur in the worst case of the largest packet possible.
Since guard bands are statically determined based on the per-tc
QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU,
we need to discuss what happens with TC 7 depending on kernel version,
since the driver, prior to commit 55a515b1f5a9 ("net: dsa: felix: drop
oversized frames with tc-taprio instead of hanging the port"), did not
touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU.
1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to
1518, and at gigabit this introduces a static guard band (independent
of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit
time of 20 octets => 160 ns). But this is larger than the time window
itself, of 10000 ns. So, the queue system never considers a frame with
TC 7 as eligible for transmission, since the gate practically never
opens, and these frames are forever stuck in the TX queues and hang
the port.
2 (after vsc9959_tas_guard_bands_update): Under the sole goal of
enabling oversized frame dropping, we make an effort to set
QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays
one more role, which we did not take into account: per-tc static guard
band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead).
There is a discrepancy between what the driver thinks (that there is
no guard band, and 100% of min_gate_len[tc] is available for egress
scheduling) and what the hardware actually does (crops the equivalent
of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this
means that the hardware thinks it has exactly 0 ns for scheduling tc 7.
In both cases, even minimum sized Ethernet frames are stuck on egress
rather than being considered for scheduling on TC 7, even if they would
fit given a proper configuration. Considering the current situation,
with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230
octets in size are not eligible for oversized dropping (because they are
smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible
for scheduling either, because the min_gate_len[7] (10000 ns) minus the
guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per
octet == 9840 ns) minus the guard band auto-added for L1 overhead by
QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets)
leaves 0 ns for scheduling in the queue system proper.
Investigating the hardware behavior, it becomes apparent that the queue
system needs precisely 33 ns of 'gate open' time in order to consider a
frame as eligible for scheduling to a tc. So the solution to this
problem is to amend vsc9959_tas_guard_bands_update(), by giving the
per-tc guard bands less space by exactly 33 ns, just enough for one
frame to be scheduled in that interval. This allows the queue system to
make forward progress for that port-tc, and prevents it from hanging.
Fixes: 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode")
Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As result of commit 915fea04f932 ("s390/smp: enable DAT before
CPU restart callback is called") the low-address protection bit
gets mistakenly unset in control register 0 save area of the
absolute zero memory. That area is used when manual PSW restart
happened to hit an offline CPU. In this case the low-address
protection for that CPU will be dropped.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Fixes: 915fea04f932 ("s390/smp: enable DAT before CPU restart callback is called")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Crash dump always starts on CPU0. In case CPU0 is offline the
prefix page is not installed and the absolute zero lowcore is
used. However, struct lowcore::mcesad is never assigned and
stays zero. That leads to __machine_kdump() -> save_vx_regs()
call silently stores vector registers to the absolute lowcore
at 0x11b0 offset.
Fixes: a62bc0739253 ("s390/kdump: add support for vector extension")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support
mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in
mpc512x via falling edge type. Do same for mpc85xx which support was added
in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio").
Fixes probing of lm90 hwmon driver on mpc85xx based board which use level
interrupt. Without it kernel prints error and refuse lm90 to work:
[ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
[ 15.267168] lm90 0-004c: cannot request IRQ 49
[ 15.272708] lm90: probe of 0-004c failed with error -22
Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The recent commit c11117b634f4 ("ALSA: usb-audio: Refcount multiple
accesses on the single clock") tries to manage the clock rate shared
by several endpoints. This was intended for avoiding the unmatched
rate by a different endpoint, but unfortunately, it introduced a
regression for PulseAudio and pipewire, too; those applications try to
probe the multiple possible rates (44.1k and 48kHz) and setting up the
normal rate fails but only the last rate is applied.
The cause is that the last sample rate is still left to the clock
reference even after closing the endpoint, and this value is still
used at the next open. It happens only when applications set up via
PCM prepare but don't start/stop the stream; the rate is reset when
the stream is stopped, but it's not cleared at close.
This patch addresses the issue above, simply by clearing the rate set
in the clock reference at the last close of each endpoint.
Fixes: c11117b634f4 ("ALSA: usb-audio: Refcount multiple accesses on the single clock")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/YxXIWv8dYmg1tnXP@zx2c4.com/
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2620
Link: https://lore.kernel.org/r/20220907100421.6443-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We started using a 64 bit completion value. Unfortunately, we only
stored the low 32-bits, so a very large completion value would never
be matched in iommu_completion_wait().
Fixes: c69d89aff393 ("iommu/amd: Use 4K page for completion wait write-back semaphore")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Link: https://lore.kernel.org/r/20220801192229.3358786-1-jsperbeck@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Now that the remaining users in drivers are gone, this function can be
marked static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
"overwirte" isn't a word. It should be "overwrite".
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The second operand passed to slot_addr() is declared as int or unsigned int
in all call sites. The left-shift to get the offset of a slot can overflow
if swiotlb size is larger than 4G.
Convert the macro to an inline function and declare the second argument as
phys_addr_t to avoid the potential overflow.
Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single")
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When bucket_find_contains() tries to find the original entry for a
partial sync, it manages to constrain its search in a way that is both
too restrictive and not restrictive enough. A driver which only uses
single mappings rather than scatterlists might not set max_seg_size, but
could still technically perform a partial sync at an offset of more than
64KB into a sufficiently large mapping, so we could stop searching too
early before reaching a legitimate entry. Conversely, if no valid entry
is present and max_range is large enough, we can pointlessly search
buckets that we've already searched, or that represent an impossible
wrapping around the bottom of the address space. At worst, the
(legitimate) case of max_seg_size == UINT_MAX can make the loop
infinite.
Replace the fragile and frankly hard-to-follow "range" logic with a
simple counted loop for the number of possible hash buckets below the
given address.
Reported-by: Yunfei Wang <yf.wang@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This reverts commit 0bf28fc40d89b1a3e00d1b79473bad4e9ca20ad1.
Reasons:
1. new panic()s shouldn't be added [1].
2. It does no "cleanup" but breaks MIPS [2].
v2: properly solved the conflict [3] with
commit 20347fca71a38 ("swiotlb: split up the global swiotlb lock")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
[1] https://lore.kernel.org/r/CAHk-=wit-DmhMfQErY29JSPjFgebx_Ld+pnerc4J2Ag990WwAA@mail.gmail.com/
[2] https://lore.kernel.org/r/20220820012031.1285979-1-yuzhao@google.com/
[3] https://lore.kernel.org/r/202208310701.LKr1WDCh-lkp@intel.com/
Fixes: 0bf28fc40d89b ("swiotlb: panic if nslabs is too small")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Report RNR NAK generation when device capabilities are queried
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-6-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Send with invalidate verb call can pass in an
uninitialized s/g array with 0 sge's which is
filled into irdma WQE and causes a HW asynchronous
event.
Fix this by using the s/g array in irdma post send
only when its valid.
Fixes: 551c46e ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-5-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When a QP and a MR on a local host are in different PDs, the HW generates
an asynchronous event (AE). The same AE is generated when a QP and a MW
are in different PDs during a bind operation. Return the more appropriate
IBV_WC_MW_BIND_ERR for the latter case by checking the OP type from the
CQE in error.
Fixes: 551c46edc769 ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-4-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The MR deregister CQP can fail if an MW is bound to it.
Return an appropriate error for this case.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Report the correct max cqes available to an application taking
into account a reserved entry to detect overflow.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus
Vinod writes:
"phy: fixes for 6.0
Fix for broken reset in marvell a3700-comphy"
* tag 'phy-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support
|
|
I get a log line like this every 4 seconds when connected to my AP:
[15650.221468] iwlwifi 0000:09:00.0: Got NSS = 4 - trimming to 2
Looking at the code, this seems to be related to a hardware limitation,
and there's nothing to be done. In an effort to keep my dmesg
manageable, downgrade this error to "debug" rather than "info".
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220905172246.105383-1-Jason@zx2c4.com
|
|
The variable "has_system_memory" is unused in function
‘adjust_memory_range_protection’, remove it.
Signed-off-by: chen zhang <chenzhang@kylinos.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The driver prevents async event work while handling a processing paused
event, but someone needs to restart it after the controller returns to a
live state.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216400
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Maximum Active Resources (MAR) and Maximum Open Resources (MOR) are 0's
based vales where a value of 0xffffffff indicates that there is no limit.
Decrement the values that are returned by bdev_max_open_zones and
bdev_max_active_zones as the block layer helpers are not 0's based.
A 0 returned by the block layer helpers indicates no limit, thus convert
it to 0xffffffff (U32_MAX).
Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.
This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.
This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero
UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix the following use-after-free warning which is observed during
controller reset:
refcount_t: underflow; use-after-free.
WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0
Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add missing __init/__exit annotations to module init/exit funcs.
Link: https://lkml.kernel.org/r/20220906141210.132607-1-xiujianfeng@huawei.com
Fixes: 135b881ea885 ("rv/reactor: Add the printk reactor")
Fixes: e88043c0ac16 ("rv/reactor: Add the panic reactor")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since the check_user_trigger() is called outside of RCU
read lock, this list_for_each_entry_rcu() caused a suspicious
RCU usage warning.
# echo hist:keys=pid > events/sched/sched_stat_runtime/trigger
# cat events/sched/sched_stat_runtime/trigger
[ 43.167032]
[ 43.167418] =============================
[ 43.167992] WARNING: suspicious RCU usage
[ 43.168567] 5.19.0-rc5-00029-g19ebe4651abf #59 Not tainted
[ 43.169283] -----------------------------
[ 43.169863] kernel/trace/trace_events_trigger.c:145 RCU-list traversed in non-reader section!!
...
However, this file->triggers list is safe when it is accessed
under event_mutex is held.
To fix this warning, adds a lockdep_is_held check to the
list_for_each_entry_rcu().
Link: https://lkml.kernel.org/r/166226474977.223837.1992182913048377113.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, The arguments passing to lockdep_hardirqs_{on,off} was fixed
in CALLER_ADDR0.
The function trace_hardirqs_on_caller should have been intended to use
caller_addr to represent the address that caller wants to be traced.
For example, lockdep log in riscv showing the last {enabled,disabled} at
__trace_hardirqs_{on,off} all the time(if called by):
[ 57.853175] hardirqs last enabled at (2519): __trace_hardirqs_on+0xc/0x14
[ 57.853848] hardirqs last disabled at (2520): __trace_hardirqs_off+0xc/0x14
After use trace_hardirqs_xx_caller, we can get more effective information:
[ 53.781428] hardirqs last enabled at (2595): restore_all+0xe/0x66
[ 53.782185] hardirqs last disabled at (2596): ret_from_exception+0xa/0x10
Link: https://lkml.kernel.org/r/20220901104515.135162-2-zouyipeng@huawei.com
Cc: stable@vger.kernel.org
Fixes: c3bc8fd637a96 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit 2852ca7fba9f ("panic: Taint kernel if tests are run")
introduced a new taint type, TAINT_TEST, to signal that an
in-kernel test module has been loaded.
TAINT_TEST taint type defaults into a 'bad_taint' list for
kernel tracing and blocks the creation of trace events. This
causes a problem for CXL testing where loading the cxl_test
module makes all CXL modules out-of-tree, blocking any trace
events.
Trace events are in development for CXL at the moment and this
issue was found in test with v6.0-rc1.
Link: https://lkml.kernel.org/r/20220829171048.263065-1-alison.schofield@intel.com
Fixes: 2852ca7fba9f7 ("panic: Taint kernel if tests are run")
Reported-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The files in scripts/tracing/ belong to the TRACING subsystem.
Add a corresponding file entry for TRACING.
Link: https://lkml.kernel.org/r/20220825115927.20598-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a Runtime Verification (RV) entry in the MAINTAINERS file
with Steven Rostedt and myself as maintainers.
Link: https://lkml.kernel.org/r/b24c13553b6947a8da16d884ca464e4233eb8fb7.1661268579.git.bristot@kernel.org
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Monitor's automata definition is only used locally, so make
them static for all existing monitors.
Link: https://lore.kernel.org/all/202208210332.gtHXje45-lkp@intel.com
Link: https://lore.kernel.org/all/202208210358.6HH3OrVs-lkp@intel.com
Link: https://lkml.kernel.org/r/a50e27c3738d6ef809f4201857229fed64799234.1661266564.git.bristot@kernel.org
Fixes: ccc319dcb450 ("rv/monitor: Add the wwnr monitor")
Fixes: 8812d21219b9 ("rv/monitor: Add the wip monitor skeleton created by dot2k")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
