summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-28sched: Correct printk whitespace in warning from cpu down task checkFrans Pop
Due to an incorrect line break the output currently contains tabs. Also remove trailing space. The actual output that logcheck sent me looked like this: Task events/1 (pid = 10) is on cpu 1^I^I^I^I(state = 1, flags = 84208040) After this patch it becomes: Task events/1 (pid = 10) is on cpu 1 (state = 1, flags = 84208040) Signed-off-by: Frans Pop <elendilplanet.nl> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <201001251456.34996.elendil@planet.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-28sched: Fix incorrect sanity checkPeter Zijlstra
We moved to migrate on wakeup, which means that sleeping tasks could still be present on offline cpus. Amend the check to only test running tasks. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27x86: Add Dell OptiPlex 760 reboot quirkLeann Ogasawara
Dell OptiPlex 760 hangs on reboot unless reboot=bios is used. Add quirk to reboot through the BIOS. BugLink: https://bugs.launchpad.net/bugs/488319 Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com> LKML-Reference: <1264634958.27335.1091.camel@emiko> Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-28MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQsDavid VomLehn
The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: PowerTV: Streamline access to platform device registersDavid VomLehn
Pre-compute addresses for the basic ASIC registers. This speeds up access and allows memory for unused configurations to be freed. In addition, uninitialized register addresses will be returned as NULL to catch bad usage quickly. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/806/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: Fix vmlinuz build for 32bit-only math shellsAlexander Clouter
POSIX requires $((<expression>)) arithmetic in sh only to have long arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit. I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is 0xffffffff94100000, and for an example 4MiB kernel VMLINUZ_LOAD_ADDRESS is made out to be: ---- alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' ffffffff94500000 alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' 80000000003fffff ---- The former is obviously correct whilst the later breaks things royally. Fortunately working with only the lower 32bit's works for both bash and dash: ---- $ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 $ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 ---- So, we can split the original 64bit string to two parts, and only calculate the low 32bit part, which is big enough (1GiB kernel sizes anyone?) for a normal Linux kernel image file, now, we calculate the VMLINUZ_LOAD_ADDRESS like this: 1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix 2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE This patch fixes vmlinuz kernel builds on systems where only a 32bit-only math shell is available. Patch Changelog: Version 2 - simplified method by using 'expr' for 'substr' and making it work with dash once again Version 1 - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error of "make clean" - Consider more cases of the VMLINUX_LOAD_ADDRESS Version 0 - initial release Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/861/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: Add support of LZO-compressed kernelsWu Zhangjin
The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Patchwork: http://patchwork.linux-mips.org/patch/857/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-27Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King
2010-01-27ALSA: hda - Add an ASUS mobo to MSI blacklistTakashi Iwai
Sid Boyce reported that his machine locks up without enable_msi=0 option. This looks like another ASUS mobo with Nvidia combo. Reported-by: Sid Boyce <sboyce@blueyonder.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree [SCSI] zfcp: Set hardware timeout as requested by BSG request. [SCSI] zfcp: Introduce bsg_timeout callback. [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout [SCSI] zfcp: add missing compat ptr conversion [SCSI] zfcp: Fix linebreak in hba trace [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request [SCSI] qla2xxx: Update version number to 8.03.01-k10. [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure. [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment. [SCSI] qla2xxx: Correct FCP2 recovery handling. [SCSI] scsi_lib: Fix bug in completion of bidi commands [SCSI] mptsas: Fix issue with chain pools allocation on katmai [SCSI] aacraid: fix File System going into read-only mode [SCSI] lpfc: fix file permissions
2010-01-27Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix single stepped svcs with TRACE_IRQFLAGS=y [S390] zcrypt: Do not remove coprocessor for error 8/72 [S390] sclp_vt220: set initial terminal window size [S390] use set_current_state in sigsuspend [S390] irqflags: add missing types.h include [S390] dasd: fix possible NULL pointer errors
2010-01-27drm/i915: Selectively enable self-reclaimChris Wilson
Having missed the ENOMEM return via i915_gem_fault(), there are probably other paths that I also missed. By not enabling NORETRY by default these paths can run the shrinker and take memory from the system (but not from our own inactive lists because our shrinker can not run whilst we hold the struct mutex) and this may allow the system to survive a little longer whilst our drivers consume all available memory. References: OOM killer unexpectedly called with kernel 2.6.32 http://bugzilla.kernel.org/show_bug.cgi?id=14933 v2: Pass gfp into page mapping. v3: Use new read_cache_page_gfp() instead of open-coding. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-27firewire: ohci: fix crashes with TSB43AB23 on 64bit systemsStefan Richter
Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour as TSB43AB22/A in dual buffer IR DMA mode: If descriptors are located at physical addresses above the 31 bit address range (2 GB), the controller will overwrite random memory. With luck, this merely prevents video reception. With only a little less luck, the machine crashes. We use the same workaround here as with TSB43AB22/A: Switch off the dual buffer capability flag and use packet-per-buffer IR DMA instead. Another possible workaround would be to limit the coherent DMA mask to 31 bits. In Linux 2.6.33, this change serves effectively only as documentation since dual buffer mode is not used for any controller anymore. But somebody might want to re-enable it in the future to make use of features of dual buffer DMA that are not available in packet-per-buffer mode. In Linux 2.6.32 and older, this update is vital for anyone with this controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or audio applications. We have at least four reports: http://bugzilla.kernel.org/show_bug.cgi?id=13808 http://marc.info/?l=linux1394-user&m=126154279004083 https://bugzilla.redhat.com/show_bug.cgi?id=552142 http://marc.info/?l=linux1394-user&m=126432246128386 Reported-by: Paul Johnson Reported-by: Ronneil Camara Reported-by: G Zornetzer Reported-by: Mark Thompson Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-27mm: add new 'read_cache_page_gfp()' helper functionLinus Torvalds
It's a simplified 'read_cache_page()' which takes a page allocation flag, so that different paths can control how aggressive the memory allocations are that populate a address space. In particular, the intel GPU object mapping code wants to be able to do a certain amount of own internal memory management by automatically shrinking the address space when memory starts getting tight. This allows it to dynamically use different memory allocation policies on a per-allocation basis, rather than depend on the (static) address space gfp policy. The actual new function is a one-liner, but re-organizing the helper functions to the point where you can do this with a single line of code is what most of the patch is all about. Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-27Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID drivers. x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG) Revert "x86: ucode-amd: Load ucode-patches once ..." x86: Disable HPET MSI on ATI SB700/SB800 x86: Set hotpluggable nodes in nodes_possible_map
2010-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix UP build.
2010-01-27x86, UV: Fix RTC latency bug by reading replicated cachelinesDimitri Sivanich
For SGI UV node controllers (HUB) rev 2.0 or greater, use replicated cachelines to read the RTC timer. This optimization allows faster simulataneous reads from a given socket. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Cc: Jack Steiner <steiner@sgi.com> LKML-Reference: <20100122154140.GB4975@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf: Ignore perf.data.oldAmerigo Wang
Tell git to ignore this file. Signed-off-by: WANG Cong <amwang@redhat.com> LKML-Reference: <20100125051052.3999.28082.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27Merge branch 'iommu/fixes' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent
2010-01-27perf report: Fix segmentation fault when running with '-g none'Yong Wang
Segmentation fault occurs when running perf report with '-g none'. Reported-by: Austin Zhang <austin.zhang@intel.com> Signed-off-by: Yong Wang <yong.y.wang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100122014750.GA4111@ywang-moblin2.bj.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27UBI: fix volume creation input checkingMika Westerberg
Do not use an unchecked variable UBI_IOCMKVOL ioctl. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@vger.kernel.org
2010-01-27Merge branch 'urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into x86/urgent
2010-01-27[S390] fix single stepped svcs with TRACE_IRQFLAGS=yMartin Schwidefsky
If irq flags tracing is enabled the TRACE_IRQS_ON macros expands to a function call which clobbers registers %r0-%r5. The macro is used in the code path for single stepped system calls. The argument registers %r2-%r6 need to be restored from the stack before the system call function is called. Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] zcrypt: Do not remove coprocessor for error 8/72Felix Beck
In a case where the number of the input data is bigger than the modulus of the key, the coprocessor adapters will report an 8/72 error. This case is not caught yet, thus the adapter will be taken offline. To prevent this, we return an -EINVAL instead. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] sclp_vt220: set initial terminal window sizeHendrik Brueckner
When opening a SCLP VT220 terminal, the terminal window size is not initialized (defaults to zero). Since the SCLP VT220 terminal supports only 80x24, explicitly set the window size to prevent (n)curses applications from guessing the default setting. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] use set_current_state in sigsuspendMartin Schwidefsky
Use set_current_state instead of a direct assignment to set the task state of the current process. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] irqflags: add missing types.h includeHeiko Carstens
Add missing types.h include. Otherwise would cause build breakages on hw breakpoint support, because of undefined BITS_PER_LONG. Also fix up the copyright line and remove the superfluous __KERNEL__ ifdef. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] dasd: fix possible NULL pointer errorsStefan Haberland
Fix possible NULL pointer in DASD messages and correct discipline checking. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-26x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID ↵Russ Anderson
drivers. Pass the number of minors when unregistering MSR and CPUID drivers. Reported-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Dean Nelson <dnelson@redhat.com> LKML-Reference: <20100127023722.GA22305@sgi.com> Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-27lockdep: Fix check_usage_backwards() error messageOleg Nesterov
Lockdep has found the real bug, but the output doesn't look right to me: > ========================================================= > [ INFO: possible irq lock inversion dependency detected ] > 2.6.33-rc5 #77 > --------------------------------------------------------- > emacs/1609 just changed the state of lock: > (&(&tty->ctrl_lock)->rlock){+.....}, at: [<ffffffff8127c648>] tty_fasync+0xe8/0x190 > but this lock took another, HARDIRQ-unsafe lock in the past: > (&(&sighand->siglock)->rlock){-.....} "HARDIRQ-unsafe" and "this lock took another" looks wrong, afaics. > ... key at: [<ffffffff81c054a4>] __key.46539+0x0/0x8 > ... acquired at: > [<ffffffff81089af6>] __lock_acquire+0x1056/0x15a0 > [<ffffffff8108a0df>] lock_acquire+0x9f/0x120 > [<ffffffff81423012>] _raw_spin_lock_irqsave+0x52/0x90 > [<ffffffff8127c1be>] __proc_set_tty+0x3e/0x150 > [<ffffffff8127e01d>] tty_open+0x51d/0x5e0 The stack-trace shows that this lock (ctrl_lock) was taken under ->siglock (which is hopefully irq-safe). This is a clear typo in check_usage_backwards() where we tell the print a fancy routine we're forwards. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100126181641.GA10460@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-26starfire: clean up properly if firmware loading failsBen Hutchings
netdev_open() will return without cleaning up net device or hardware state if firmware loading fails. This results in a BUG() on a second attempt to bring the interface up, reported in <http://bugzilla.kernel.org/show_bug.cgi?id=15091>, and probably has even worse effects if the driver is removed afterwards. Call netdev_close() to clean up on failure. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15091 Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Reported-by: Michael Moffatt <michael@moffatt.org.nz> Tested-by: Michael Moffatt <michael@moffatt.org.nz> Cc: "David S. Miller" <davem@davemloft.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26Fix failure exit in ipathfsAl Viro
deactivate_locked_super() will be done by caller of fill_super, doing it there as well is b0rken. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26fix oops in fs/9p late mount failureAl Viro
if 9P ->get_sb() fails late (at root inode or root dentry allocation), we'll hit its ->kill_sb() with NULL ->s_root Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26fix leak in romfs_fill_super()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26get rid of pointless checks after simple_pin_fs()Al Viro
if we'd just got success from it, vfsmount won't be NULL Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26Fix failure exits in bfs_fill_super()Al Viro
double iput(), leaks... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26fix affs parse_options()Al Viro
Error handling in that sucker got broken back in 2003. If function returns 0 on failure, it's not nice to add return -EINVAL into it. Adding return 1 on other failure exits is also not a good thing (and yes, original success exits with 1 and some of failure exits with 0 are still there; so's the original logics in callers). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26Fix remount races with symlink handling in affsAl Viro
A couple of fields in affs_sb_info is used in follow_link() and symlink() for handling AFFS "absolute" symlinks. Need locking against affs_remount() updates. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26Fix a leak in affs_fill_super()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26fnctl: f_modown should call write_lock_irqsave/restoreGreg Kroah-Hartman
Commit 703625118069f9f8960d356676662d3db5a9d116 exposed that f_modown() should call write_lock_irqsave instead of just write_lock_irq so that because a caller could have a spinlock held and it would not be good to renable interrupts. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tavis Ormandy <taviso@google.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-26tracing/documentation: Cover new frame pointer semanticsMike Frysinger
Update the graph tracer examples to cover the new frame pointer semantics (in terms of passing it along). Move the HAVE_FUNCTION_GRAPH_FP_TEST docs out of the Kconfig, into the right place, and expand on the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org> LKML-Reference: <1264165967-18938-1-git-send-email-vapier@gentoo.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-26tracing/documentation: Fix a typo in ftrace.txtYang Hongyang
'ftrace' is no longer the name of the function tracer, to activate the function trace 'echo function > current_tracer' is to be used instead of 'echo ftrace > current_tracer'. Update the documentation to reflect the current implementation. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> LKML-Reference: <4B5D0BA8.20106@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-26ring-buffer: Check for end of page in iteratorSteven Rostedt
If the iterator comes to an empty page for some reason, or if the page is emptied by a consuming read. The iterator code currently does not check if the iterator is pass the contents, and may return a false entry. This patch adds a check to the ring buffer iterator to test if the current page has been completely read and sets the iterator to the next page if necessary. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-26ring-buffer: Check if ring buffer iterator has stale dataSteven Rostedt
Usually reads of the ring buffer is performed by a single task. There are two types of reads from the ring buffer. One is a consuming read which will consume the entry that was read and the next read will be the entry that follows. The other is an iterator that will let the user read the contents of the ring buffer without modifying it. When an iterator is allocated, writes to the ring buffer are disabled to protect the iterator. The problem exists when consuming reads happen while an iterator is allocated. Specifically, the kind of read that swaps out an entire page (used by splice) and replaces it with a new read. If the iterator is on the page that is swapped out, then the next read may read from this swapped out page and return garbage. This patch adds a check when reading the iterator to make sure that the iterator contents are still valid. If a consuming read has taken place, the iterator is reset. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-26NFS: Ensure that we handle NFS4ERR_STALE_STATEID correctlyTrond Myklebust
Even if the server is crazy, we should be able to mark the stateid as being bad, to ensure it gets recovered. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFSv4.1: Don't call nfs4_schedule_state_recovery() unnecessarilyTrond Myklebust
Currently, nfs4_handle_exception() will call it twice if called with an error of -NFS4ERR_STALE_CLIENTID, -NFS4ERR_STALE_STATEID or -NFS4ERR_EXPIRED. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFSv4: Don't allow posix locking against servers that don't support itTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFSv4: Ensure that the NFSv4 locking can recover from stateid errorsTrond Myklebust
In most cases, we just want to mark the lock_stateid sequence id as being uninitialised. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFS: Avoid warnings when CONFIG_NFS_V4=nDavid Howells
Avoid the following warnings when CONFIG_NFS_V4=n: fs/nfs/sysctl.c:19: warning: unused variable `nfs_set_port_max' fs/nfs/sysctl.c:18: warning: unused variable `nfs_set_port_min' by making those variables contingent on NFSv4 being configured. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFS: Make nfs_commitdata_release staticH Hartley Sweeten
The symbol nfs_commitdata_release is only used locally in this file. Make it static to prevent the following sparse warning: warning: symbol 'nfs_commitdata_release' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-17 08:40:10 +0000