summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-03enc28j60: Fix sporadic packet loss (corrected again)Baruch Siach
Packet data read from the RX buffer the when the RSV is at the end of the RX buffer does not warp around. This causes packet loss, as the actual data is never read. Fix this by calculating the right packet data location. Thanks to Shachar Shemesh for suggesting the fix. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03bond: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03mptlan: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03dvb: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03pkt_sched: sch_htb: Clean htb_class prio and quantum fieldsJarek Poplawski
While implementing htb_parent_to_leaf() there where added backup prio and quantum struct htb_class fields to preserve these values for inner classes in case of their return to leaf. This patch cleans this a bit by removing union leaf duplicates. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03pkt_sched: sch_htb: Remove htb_sched nwc_hit fieldJarek Poplawski
Remove practically unused struct htb_sched nwc_hit field. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03pkt_sched: sch_htb: Remove htb_class aprio fieldJarek Poplawski
Remove practically unused struct htb_class aprio field. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03forcedeth: power down phy when interface is downEd Swierk
Bring the physical link down when the interface is down by placing the PHY in power-down state, unless WOL is enabled. This mirrors the behavior of other drivers including e1000 and tg3. Without the patch, ifconfig down leaves the physical link up, which confuses datacenter users who expect the link lights both on the NIC and the switch to go out when they bring an interface down. Furthermore, even though the phy is powered on, autonegotiation stops working, so a normally gigabit link might suddenly become 100 Mbit half-duplex when the interface goes down, and become gigabit when it comes up again. Ayaz said: I would not include this patch until further testing is performed. NVIDIA MCP chips use 3rd party PHY vendors. By powering down the phy, it could have adverse affects on certain phys. Arthur Jones said: I just ran across this patch. Tested on a Marvell 88E1121R (GigE PHY) and works great. This is a very important feature for me. Signed-off-by: Ed Swierk <eswierk@arastra.com> Tested-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03drivers/net/smc911x.c: smc911x_drv_probe() cleanupAndrew Morton
Save an ugly ifdef. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03hysdn: fix writing outside the field on 64 bitsPascal Terjan
ifa_local is assumed to be unsigned long which lead to writing the address at dev->dev_addr-2 instead of +2 noticed thanks to gcc: drivers/isdn/hysdn/hysdn_net.c: In function `net_open': drivers/isdn/hysdn/hysdn_net.c:91: warning: array subscript is below array bounds Signed-off-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03drivers/isdn/mISDN: use ARRAY_SIZEJulia Lawall
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @i@ @@ #include <linux/kernel.h> @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03b1isa: fix b1isa_exit() to really remove registered capi controllersWilfried Klaebe
On "/etc/init.d/capiutils stop", this oops happened. The oops happens on reading /proc/capi/controllers because capi_ctrl->procinfo is called for the wrongly not unregistered controller, which points to b1isa_procinfo(), which was removed on module unload. b1isa_exit() did not call b1isa_remove() for its controllers because io[0] == 0 on module unload despite having been 0x340 on module load. Besides, just removing the controllers that where added on module load time and not those that were added later via b1isa_add_card() is wrong too - the place where all added cards are found is isa_dev[]. relevant dmesg lines: [ 0.000000] Linux version 2.6.27.4 (w@shubashi) (gcc version 4.3.2 (Debian 4.3.2-1) ) #3 Thu Oct 30 16:49:03 CET 2008 [ 67.403555] CAPI Subsystem Rev 1.1.2.8 [ 68.529154] capifs: Rev 1.1.2.3 [ 68.563292] capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) [ 77.026936] b1: revision 1.1.2.2 [ 77.049992] b1isa: revision 1.1.2.3 [ 77.722655] kcapi: Controller [001]: b1isa-340 attached [ 77.722671] b1isa: AVM B1 ISA at i/o 0x340, irq 5, revision 255 [ 81.272669] b1isa-340: card 1 "B1" ready. [ 81.272683] b1isa-340: card 1 Protocol: DSS1 [ 81.272689] b1isa-340: card 1 Linetype: point to multipoint [ 81.272695] b1isa-340: B1-card (3.11-03) now active [ 81.272702] kcapi: card [001] "b1isa-340" ready. [ 153.721281] kcapi: card [001] down. [ 154.151889] BUG: unable to handle kernel paging request at e87af000 [ 154.152081] IP: [<e87af000>] [ 154.153292] *pde = 2655b067 *pte = 00000000 [ 154.153307] Oops: 0000 [#1] [ 154.153360] Modules linked in: rfcomm l2cap ppdev lp ipt_MASQUERADE tun capi capifs kernelcapi ac battery nfsd exportfs nfs lockd nfs_acl sunrpc sit tunnel4 bridge stp llc ipt_REJECT ipt_LOG xt_tcpudp xt_state iptable_filter iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables nls_utf8 isofs nls_base zlib_inflate loop ipv6 netconsole snd_via82xx dvb_usb_dib0700 gameport dib7000p dib7000m dvb_usb snd_ac97_codec ac97_bus dvb_core mt2266 snd_pcm tuner_xc2028 dib3000mc dibx000_common mt2060 dib0070 snd_page_alloc snd_mpu401_uart snd_seq_midi snd_seq_midi_event btusb snd_rawmidi bluetooth snd_seq snd_timer snd_seq_device snd via686a i2c_viapro soundcore i2c_core parport_pc parport button dm_mirror dm_log dm_snapshot floppy sg ohci1394 uhci_hcd ehci_hcd 8139too mii ieee1394 usbcore sr_mod cdrom sd_mod thermal processor fan [last unloaded: b1] [ 154.153360] [ 154.153360] Pid: 4132, comm: capiinit Not tainted (2.6.27.4 #3) [ 154.153360] EIP: 0060:[<e87af000>] EFLAGS: 00010286 CPU: 0 [ 154.153360] EIP is at 0xe87af000 [ 154.153360] EAX: e6b9ccc8 EBX: e6b9ccc8 ECX: e87a0c67 EDX: e87af000 [ 154.153360] ESI: e142bbc0 EDI: e87a56e0 EBP: e0505f0c ESP: e0505ee4 [ 154.153360] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 154.153360] Process capiinit (pid: 4132, ti=e0504000 task=d1196cf0 task.ti=e0504000) [ 154.153360] Stack: e879f650 00000246 e0505ef4 c01472eb e0505f0c 00000246 e7001780 fffffff4 [ 154.153360] fffffff4 e142bbc0 e0505f48 c01a56c6 00000400 b805e000 d102dc80 e142bbe0 [ 154.153360] 00000000 e87a56e0 00000246 e12617ac 00000000 00000000 e1261760 fffffffb [ 154.153360] Call Trace: [ 154.153360] [<e879f650>] ? controller_show+0x20/0x90 [kernelcapi] [ 154.153360] [<c01472eb>] ? trace_hardirqs_on+0xb/0x10 [ 154.153360] [<c01a56c6>] ? seq_read+0x126/0x2f0 [ 154.153360] [<c01a55a0>] ? seq_read+0x0/0x2f0 [ 154.153360] [<c01c033c>] ? proc_reg_read+0x5c/0x90 [ 154.153360] [<c0189919>] ? vfs_read+0x99/0x140 [ 154.153360] [<c01c02e0>] ? proc_reg_read+0x0/0x90 [ 154.153360] [<c0189a7d>] ? sys_read+0x3d/0x70 [ 154.153360] [<c0103c3d>] ? sysenter_do_call+0x12/0x35 [ 154.153360] ======================= [ 154.153360] Code: Bad EIP value. [ 154.153360] EIP: [<e87af000>] 0xe87af000 SS:ESP 0068:e0505ee4 [ 154.153360] ---[ end trace 23750b6c2862de94 ]--- Signed-off-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03sparc64: Fix VIS emulation bugsJoseph Myers
This patch fixes some bugs in VIS emulation that cause the GCC test failure FAIL: gcc.target/sparc/pdist-3.c execution test for both 32-bit and 64-bit testing on hardware lacking these instructions. The emulation code for the pdist instruction uses RS1(insn) for both source registers rs1 and rs2, which is obviously wrong and leads to the instruction doing nothing (the observed problem), and further inspection of the code shows that RS1 uses a shift of 24 and RD a shift of 25, which clearly cannot both be right; examining SPARC documentation indicates the correct shift for RS1 is 14. This patch fixes the bug if single-stepping over the affected instruction in the debugger, but not if the testcase is run standalone. For that, Wind River has another patch I hope they will send as a followup to this patch submission. Signed-off-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04drm/i915: Return error in i915_gem_set_to_gtt_domain if we're not in the GTT.Eric Anholt
It's only for flushing caches appropriately for GTT access, not for actually getting it there. Prevents potential smashing of cpu read/write domains on unbound objects. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Retry execbuffer pinning after clearing the GTTKeith Packard
If we fail to pin all of the buffers in an execbuffer request, go through and clear the GTT and try again to see if its just a matter of fragmentation Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Move the execbuffer domain computations togetherKeith Packard
This eliminates the dev_set_domain function and just in-lines it where its used, with the goal of moving the manipulation and use of invalidate_domains and flush_domains closer together. This also avoids calling add_request unless some domain has been flushed. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Rename object_set_domain to object_set_to_gpu_domainKeith Packard
Now that the CPU and GTT domain operations are isolated to their own functions, the previously general-purpose set_domain function is now used only to set GPU domains. It also has no failure cases, which is important as this eliminates any possible interruption of the computation of new object domains and subsequent emmission of the flushing instructions into the ring. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Make a single set-to-cpu-domain path and use it wherever needed.Eric Anholt
This fixes several domain management bugs, including potential lack of cache invalidation for pread, potential failure to wait for set_domain(CPU, 0), and more, along with producing more intelligible code. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Make a single set-to-gtt-domain path.Eric Anholt
This fixes failure to flush caches in the relocation update path, and failure to wait in the set_domain ioctl, each of which could lead to incorrect rendering. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: If interrupted while setting object domains, still emit the flush.Eric Anholt
Otherwise, we would leave the objects in an inconsistent state, such as write_domain == 0 but on the flushing list. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Move flushing list cleanup from flush request retire to request emit.Eric Anholt
obj_priv->write_domain is "write domain if the GPU went idle now", not "write domain at this moment." By postponing the clear, we confused the concept, required more storage, and potentially emitted more flushes than are required. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04drm/i915: Respect GM965/GM45 bit-17-instead-of-bit-11 option for swizzling.Eric Anholt
This fixes readpixels and buffer corruption when swapped out and in by disabling tiling on them. Now that we know that the bit 17 mode isn't just a mistake of older chipsets, we'll need to work on a clever fix so that we can get the performance of tiling on these chipsets, but that will require intrusive changes targeted at the next kernel release, not this one. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-03MN10300: Introduce barriers to replace removed volatiles in gdbstub 16550 driverDavid Howells
Introduce into the MN10300 gdbstub 16550 driver a couple of barrier() calls to replace the removed volatility of the input/output index variables for the Rx ring buffer. A previous patch added them into the on-chip serial port driver. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-03MAINTAINERS: Add security subsystem maintainerJames Morris
Add myself as overall maintainer of the security subsystem (generally, components under the top-level security directory). This addresses the lack of an official maintainer for the increasing number of security projects being incorporated into the kernel. Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-03Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix setting of max_segment_size and seg_boundary mask block: internal dequeue shouldn't start timer block: set disk->node_id before it's being used When block layer fails to map iov, it calls bio_unmap_user to undo
2008-12-03Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dts powerpc: Fix dma_map_sg() cache flushing on non coherent platforms
2008-12-03Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: NLM: client-side nlm_lookup_host() should avoid matching on srcaddr nfsd: use of unitialized list head on error exit in nfs4recover.c Add a reference to sunrpc in svc_addsock nfsd: clean up grace period on early exit
2008-12-03dmaengine: protect 'id' from concurrent registrationsDan Williams
There is a possibility to have two devices registered with the same id. Cc: <stable@kernel.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-12-03iTCO_wdt: fix typo when setting TCO_EN bitLinus Torvalds
The code used '&= 0x00002000' when it tried to set the TCO_EN bit, which obviously didn't set that bit at all, but instead just reset all the other bits in the SMI_EN register. This bug seemingly caused various random behavior, with Frans Pop reporting that X.org just silently hung at startup and Rafael Wysocki reports the fan spinning with full speed. See http://lkml.org/lkml/2008/12/3/178 http://bugzilla.kernel.org/show_bug.cgi?id=12162 The problem seems to have been triggered by "[WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards" (commit 7cd5b08be3c489df11b559fef210b81133764ad4), but the bogus code existed before that too (in the "supermicro_old_pre_stop()" function), it just apparently never showed up due to different logic. In that commit the broken code got moved around and now gets executed much more. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Frans Pop <elendil@planet.nl> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-03ioat: wait for self-test completionDan Williams
As part of the ioat_dma self-test it performs a printk from a completion callback. Depending on the system console configuration this output can take longer than a millisecond causing the self-test to fail. Introduce a completion with a generous timeout to mitigate this failure. Cc: <stable@kernel.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-12-03sparc: asm/bitops.h should define __flsRusty Russell
bitops_64.h includes the generic one; pretty sure 32 should too. (Found by using __fls in generic code and breaking sparc defconfig build: thanks Stephen and linux-next!) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03can: Fix CAN_(EFF|RTR)_FLAG handling in can_filterOliver Hartkopp
Due to a wrong safety check in af_can.c it was not possible to filter for SFF frames with a specific CAN identifier without getting the same selected CAN identifier from a received EFF frame also. This fix has a minimum (but user visible) impact on the CAN filter API and therefore the CAN version is set to a new date. Indeed the 'old' API is still working as-is. But when now setting CAN_(EFF|RTR)_FLAG in can_filter.can_mask you might get less traffic than before - but still the stuff that you expected to get for your defined filter ... Thanks to Kurt Van Dijck for pointing at this issue and for the review. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03isdn: Kill directly reference of netdev->privWang Chen
Simply use netdev_priv() to replace netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03hysdn: Kill directly reference of netdev->privWang Chen
Usually, netdev->priv should point to the memory of private data which is allocated in alloc_netdev(). netdev_priv() is used to get the address of the private data. Change the netdev->priv pointer to another memory is wrong. Use netdev->ml_priv for this case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03Phonet: basic net namespace supportRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03Phonet: do not dump addresses from other namespacesremi.denis-courmont@nokia
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03xfrm: Accept XFRM_STATE_AF_UNSPEC SAs on IPv4/IPv6 only hostsMartin Willi
Installing SAs using the XFRM_STATE_AF_UNSPEC fails on hosts with support for one address family only. This patch accepts such SAs, even if the processing of not supported packets will fail. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03setlocalversion: add git-svn supportPeter Korsgaard
Print svn revision in addition to git info on git-svn repos. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03setlocalversion: print correct subversion revisionPeter Korsgaard
Output svn revision of latest change, instead of repo revision as thats what we're interested in (especially when working on a branch/tag). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03scripts: improve the decodecode scriptArjan van de Ven
kerneloops.org has been using an improved "decodecode" script, specifically it has a special marker that shows which line in the assembly the oops happened at, like this: 20: 83 e0 03 and $0x3,%eax 23: 09 d8 or %ebx,%eax 25: 85 db test %ebx,%ebx 27: 89 02 mov %eax,(%edx) 29: 74 0f je 0x3a 2b:* 3b 73 04 cmp 0x4(%ebx),%esi <-- trapping instruction 2e: 75 05 jne 0x35 30: 89 53 04 mov %edx,0x4(%ebx) 33: eb 07 jmp 0x3c 35: 89 53 08 mov %edx,0x8(%ebx) this patch updates the kernel copy to also have this functionality. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Reviewed-by: WANG Cong <wangcong@zeuux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03scripts/package: allow custom options to rpmJeremy Kerr
Add a RPMOPTS make variable to allow arbitrary options to be passed to rpm during 'make rpm-pkg'. For example: make RPMOPTS="--define '_topdir /home/jk/rpm'" rpm-pkg Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03genksyms: allow to ignore symbol checksum changesAndreas Gruenbacher
This adds an "override" keyword for use in *.symvers / *.symref files. When a symbol is overridden, the symbol's old definition will be used for computing checksums instead of the new one, preserving the previous checksum. (Genksyms will still warn about the change.) This is meant to allow distributions to hide minor actual as well as fake ABI changes. (For example, when extra type information becomes available because additional headers are included, this may change checksums even though none of the types used have actully changed.) This approach also allows to get rid of "#ifdef __GENKSYMS__" hacks in the code, which are currently used in some vendor kernels to work around checksum changes. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03genksyms: track symbol checksum changesAndreas Gruenbacher
Sometimes it is preferable to avoid changes of exported symbol checksums (to avoid breaking externally provided modules). When a checksum change occurs, it can be hard to figure out what caused this change: underlying types may have changed, or additional type information may simply have become available at the point where a symbol is exported. Add a new --reference option to genksyms which allows it to report why checksums change, based on the type information dumps it creates with the --dump-types flag. Genksyms will read in such a dump from a previous run, and report which symbols have changed (and why). The behavior can be controlled for an entire build as follows: If KBUILD_SYMTYPES is set, genksyms uses --dump-types to produce *.symtypes dump files. If any *.symref files exist, those will be used as the reference to check against. If KBUILD_PRESERVE is set, checksum changes will fail the build. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03tags and cscope support really belongs in a shell scriptSam Ravnborg
as they do not benefit from the make functionality. Moving the support to a shell script has several benefits: - The readability of the code has increased a lot - More people is able to extend the tags support - We see less changes to the top-level Makefile The shell script version includes improvements from: Alexey Dobriyan <adobriyan@gmail.com> (jump to kconfig symbols) Alexey Dobriyan <adobriyan@gmail.com> (drop ./ in paths) Ian Campbell <ijc@hellion.org.uk> (simplified find algorithms) This version has a few caveats: => It does not support ALLSOURCE_ARCHS - it is easy to add if it is really used => It assumes all archs have moved to arch/$ARCH/include - until that happens we have a few additional hits in the archs Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Tested-by: Ian Campbell <ijc@hellion.org.uk>
2008-12-03powerpc/85xx: Create dts for each core in CAMP mode for MPC8572DSHaiying Wang
This patch creates the dts files for each core and splits the devices between the two cores for MPC8572DS. core0 has memory, L2, i2c, dma1, global-util, eth0, eth1, crypto, pci0, pci1. core1 has L2, dma2, eth2, eth3, pci2, msi. MPIC is shared between two cores but each core will protect its interrupts from other core by using "protected-sources" of mpic. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03kconfig: fix options to check-lxdialog.shSam Ravnborg
As noted by Bernhard - fix it up. Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03kbuild: gen_init_cpio expands shell variables in file namesSally, Gene
Modify gen_init_cpio so that lines that specify files can contain what looks like a shell variable that's expanded during processing. For example: file /sbin/kinit ${RFS_BASE}/usr/src/klibc/kinit/kinit 0755 0 0 given RFS_BASE is "/some/directory" in the environment would be expanded to file /sbin/kinit /some/directory/usr/src/klibc/kinit/kinit 0755 0 0 If several environment variables appear in a line, they are all expanded with processing happening from left to right. Undefined variables expand to a null string. Syntax errors stop processing, letting the existing error handling show the user offending line. This patch helps embedded folks who frequently create several RFS directories and then switch between them as they're tuning an initramfs. Signed-off-by: gene.sally@timesys.com Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03remove bashisms from scripts/extract-ikconfigWerner Almesberger
unbashify-extract-ikconfig.patch scripts/extract-ikconfig contains a lot of gratuituous bashisms, which make it fail if /bin/sh isn't bash. This patch replaces them with regular Bourne shell constructs. Signed-off-by: Werner Almesberger <werner@openmoko.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> # as file author Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03kbuild: teach mkmakfile to be silentSam Ravnborg
With this fix a "make -s" is now really silent Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03kbuild: use KECHO convenience echoMike Frysinger
Convert a few echos in the build system to new $(kecho) so we get correct output according to build verbosity. Signed-off-by: Mike Frysinger <vapier@gentoo.org> [sam: added kecho in a few more places for O=... builds] Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
generated by cgit (git 2.34.1) at 2025-09-22 14:33:19 +0000