summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-19iwlwifi: use type uint for module param debugWu, Fengguang
This enables one to change the debug level at bit 31. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: update comments on the debug interfaceWu, Fengguang
Bring up-to-date some comments on the location of debug files. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: add line feed to printkWu, Fengguang
This adds line feed to printk. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: cleanup iwl-dev.hWinkler, Tomas
The patch removes unused definition and moves code to proper places. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19mac80211: fix a typo in ieee80211_send_assoc() method.Rami Rosen
This patch fixes a typo in ieee80211_send_assoc(), net/mac80211/mlme.c. The error is usage of a wrong member when building the ie80211 management frame (it should be assoc_req, and not reassoc_req). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: remove a parameter (dest) from *_fill_beacon_frame() methods.Rami Rosen
This patch removes a parameter (dest) from iwl_fill_beacon_frame() (iwl-agn.c) and from iwl3945_fill_beacon_frame(). (iwl-3945.c,iwl-3945.h) Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Move rate control alg register/unregister to appropriate placeVasanthakumar Thiagarajan
This patch makes sure the rate control alg is registered/unregistered only once for this module. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Synchronize DMA transfer with CPU at right placeVasanthakumar Thiagarajan
This patch does pci_dma_sync_single_for_cpu() before accessing the header of the frame and queueing the same buffer into h/w. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Remove MAC header pad before reporting TX statusJouni Malinen
Remove the possible MAC header pad before reporting TX status to mac80211. This pad is hardware specific operation and should not be exposed outside the driver. This fixes the frame body in monitor interfaces that could be used to check on TX status for transmitted frames. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fix TX status reporting for retries and MCS indexJouni Malinen
The count field in struct ieee80211_tx_rate does not include the final successful attempt, so only report retries here. Fix the struct ieee80211_tx_rate::idx field when MCS was used. It is supposed to be the MCS index, not an internal index to the rate control algorithm table. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19mac80211: Remove radiotap rate-present flag for HTJouni Malinen
Since we do not currently report HT rates (MCS index) in radiotap header for HT rates, we should not claim the rate is present. The rate octet itself is used as padding in this case, so only the it_present flag needs to be removed in case of HT rates. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19rtl8187: Fix crash on unload when using SLUB debugHerton Ronaldo Krzesinski
Reported-by: Hin-Tak Leung <htl10@users.sourceforge.net> After the code was modified to use urb anchors ("rtl8187: Use usb anchor facilities to manage urbs"), rtl8187 began generating an intermittent GPF on shutdown when using SLUB with debugging enabled. Furthermore, rebooting the system with a ping running caused a GPF every time. There are two problems: (1) incorrect locking in the rtl8187_rx_cb() routine, a pre-existing bug that apparently had not been triggered before, and (2) duplicate freeing of receive skbs that was probably introduced with the change to anchors. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19p54: remove free_on_tx parameterChristian Lamparter
This patch simplifies the tx code a bit and will be necessary for the upcoming stlc45xx<->p54 port. In detail: we no longer have to tell all back-end drivers directly, if we want to free a frame right after it was send to the firmware, or if we do it in the library callback later. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19p54: more accurate rssi to dBm conversionChristian Lamparter
This patch replaces the static rssi auto calibration data with more precise values out of the device's eeprom. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19rtl8187: Fix error returnsLarry Finger
There are two places in the rtl8187 code where a routine was returning zero (OK) when it should have been returning an error. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19libertas: use roundup instead of opencodingIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19p54: update ACK failure statistic counter in real-timeChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19p54: move statistic timer update routine into a workqueueChristian Lamparter
This patch moves a good chunk of code from the former statistic update timer routine into a workqueue, which is kindly provided by mac80211. Also as a nice side-effect we can lay the foundation for other essential housekeeping features we want to do in the future. e.g: - drain the (clogged) tx_queue. - initiate bursts. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlagn: fix agn rate scalingMohamed Abbas
Rate scaling in agn can be broken because of these two problems 1- the LQ command could not sent, we try to call LQ command before post association will be rejected, this will cause the driver to break in rs_tx_status reporting initial rate does not match. 2- In rs_rate_init we can get a value of 12, rate 60, for last_txrate_idx, this rate only valid in SISO/MIMO mode only Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19mac80211: Send Layer 2 Update frame on reassociationJouni Malinen
When a STA roams back to the same AP before the previous STA entry has expired, a new STA entry is not added in mac80211. However, a Layer 2 Update frame still needs to be transmitted to update layer 2 devices about the new location for the STA. Without this, switches may continue to forward frames to the previous (now incorrect) port when STA roams between APs. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath5k: fix 802.11 header padding on RX, unpadding on TXBenoit PAPILLAULT
Padding the 802.11 header to a multiple of 4 bytes needs to be done only for frames with a body. This fixes a bug where 2 bytes were missing in monitor mode for ACK frames. Inspired by a patch from Jouni Malinen on ath9k. Ref: http://bugzilla.kernel.org/show_bug.cgi?id=12101 : Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Report HT rates in RX statusJouni Malinen
Fix and clean up the RX status reporting by getting rid of code that used internal rate tables and ratekbps calculation. The correct value is now reported with MCS index instead of the old mechanism that defaulted to using the highest legacy rate. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19mac80211: Add HT rates into RX status reportingJouni Malinen
This patch adds option for HT-enabled drivers to report HT rates (HT20/HT40, short GI, MCS index) to mac80211. These rates are currently not in the rate table, so the rate_idx is used to indicate MCS index. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Do not use association state to update rate tableSujith
Now that HT information is made available to the driver through config() callback, the channel type can be calculated whenever setting the channel. Update the rate table accordingly with the new channel type. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19mac80211: Fix HT channel selectionSujith
HT management is done differently for AP and STA modes, unify to just the ->config() callback since HT is fundamentally a PHY property and cannot be per-BSS. Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote the channel type ( NO_HT, HT20, HT40+, HT40- ). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19nl80211: Add signal strength and bandwith to nl80211station infoHenning Rogge
This patch adds signal strength and transmission bitrate to the station_info of nl80211. Signed-off-by: Henning Rogge <rogge@fgan.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt fusion: clear list of outstanding commands on host reset [SCSI] scsi_lib: only call scsi_unprep_request() under queue lock [SCSI] ibmvstgt: move crq_queue_create to the end of initialization [SCSI] libiscsi REGRESSION: fix passthrough support with older iscsi tools [SCSI] aacraid: disable Dell Percraid quirk on Adaptec 2200S and 2120S
2008-12-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix a Oops bug in omap soc driver. ALSA: hda - Remove non-working headphone control for Dell laptops ALSA: hda - Add no-jd model for IDT 92HD73xx ALSA: Revert "ALSA: hda: removed unneeded hp_nid references" ALSA: hda - Add quirk for Dell Studio 17 ALSA: hda - Fix silent HP output on D975
2008-12-19Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: fix problem that deleting multiple logical drives could cause a panic
2008-12-19Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: GEM on PAE has problems - disable it for now. drm/i915: Don't return busy for buffers left on the flushing list.
2008-12-19Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: Don't read past end of bitmap when reading bitmap.
2008-12-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: ibmphp: Fix module ref count underflow PCI hotplug: acpiphp wants a 64-bit _SUN PCI: pciehp: fix unexpected power off with pciehp_force PCI: fix aer resume sanity check
2008-12-19kernel-doc: check for extra kernel-doc notationsRandy Dunlap
Add functionality to check for function parameters or structure (or union/typedef/enum) field members that are described in kernel-doc but are not part of the expected (declared) parameters or structure. These generate warnings that are called "Excess" descriptions. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-19ALSA: hda - Power up always when no jack detection is availableTakashi Iwai
When no jack detection is available, the pins should be always turned on since it can't be turned on/off dynamically via unsol events. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19ftrace: introduce tracing_reset_online_cpus() helperPekka J Enberg
Impact: cleanup This patch factors out common code from multiple tracers into a tracing_reset_online_cpus() function and converts the tracers to use it. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19ALSA: hda - Fix unused variable warnings in patch_sigmatel.cTakashi Iwai
Fixed "unused varible" warnings in patch_sigmatel.c that have been introduced by the last changes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19Merge branch 'topic/hda-stac-fix' into topic/hdaTakashi Iwai
2008-12-19Merge branch 'fix/asoc' into for-linusTakashi Iwai
2008-12-19Merge branch 'fix/asoc' into topic/asocTakashi Iwai
2008-12-19ALSA: Fix a Oops bug in omap soc driver.Stanley Miao
There will be a Oops or frequent underrun messages when playing music with omap soc driver, this is because a data region is incorretly sized, other data region will be overwriten when writing to this data region. Signed-off-by: Stanley Miao <stanley.miao@windriver.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19ALSA: hda - Add probe_only optionTakashi Iwai
Added probe_only module option to hd-audio driver. This option specifies whether the driver creates and initializes the codec-parser after probing. When this option is set, the driver skips the codec parsing and initialization but gives you proc and other accesses. It's useful to see the initial codec state for debugging. The default of this value is off, so the default behavior is as same as before. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19ALSA: hda - Use more distinct name for a unique volume in STAC/IDTTakashi Iwai
When the line_out has only one DAC and it's unique (i.e. not shared by other outputs), assign a more reasonable and distinct mixer name such as "Headphone" or "Speaker". Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19ALSA: hda - Rework on STAC/IDT auto-configuration codeTakashi Iwai
The current auto-configuration code has several problems especially for the new IDT codecs, e.g. wrong assignment of pins and DACs or coupled volume for speaker and headphone. This patch is a fairly large rewrite of the auto-configuration code. Some remaks - mic_switch and line_switch contain NIDs instead of bool - dac_list isn't fixed for IDT 92HD* codecs now, they are all probed - extra HP and speakers are stored in extra_dacs[]. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2008-12-19ALSA: hda - Remove non-working headphone control for Dell laptopsTakashi Iwai
The previous commit re-enabled hp_nid setup for IDT92HD73*, but it's unneeded indeed for Dell laptops that have multiple headphones. Setting the extra hp_nid results in a non-working "Headpohne" mixer control. Thus hp_nid should be 0 for these dell models. Also, the automatic addition of hp_nid should check whether it's a dual-HP model or not. For dual-HPs, the pins are already checked by the early workaround. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19ALSA: ca0106 - Fix typo in resume codeTakashi Iwai
The register and channel_id pair were twisted in the pm code... Oh my. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19ALSA: hda - Fix HD-Audio.txt reference of model listTakashi Iwai
The model list is now in HD-Audio-Models.txt. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19ALSA: ca0106 - Add IEC958 PCM Stream controlsTakashi Iwai
Added "IEC958 PCM Stream" controls for the per-stream IEC958 status bits. Using this instead of "IEC958 Default" is safer since the status bits will be recovered to the default states after closing the PCM stream. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19ALSA: ca0106 - Don't override the values at resumeTakashi Iwai
Don't override some values in ca0106_init_chip() at resume. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19ACPI: don't cond_resched() when irqs_disabled()Wu Fengguang
The ACPI interpreter usually runs with irqs enabled. However, during suspend/resume it runs with irqs disabled to evaluate _GTS/_BFS, as well as by irqrouter_resume() which evaluates _CRS, _PRS, _SRS. http://bugzilla.kernel.org/show_bug.cgi?id=12252 Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 13:44:35 +0000