summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-24hwmon: (vexpress) Use legal hwmon device namesPawel Moll
The driver used to directly us a DT 'compatible' property for the 'name' attribute of the hwmon devices. Unfortunately it contains '-' which is illegal in this context. It messes up libsensors and thus every application using it. Fixed by providing equivalent (and simpler) name strings. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-24ASoC: core: Add one dai_get_widget helper instead of two rtd based onesBenoit Cousson
Replace rtd_get_codec_widget() and rtd_get_cpu_widget() by a simple dai_get_widget() in preparation for DAI-multicodec support, per Lars suggestion. No functional change. Signed-off-by: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: core: Add helpers for dai link and aux dev initMisael Lopez Cruz
Separate DAI link and aux dev initialization in preparation for DAI multicodec support. Since aux dev will remain using single codecs but DAI links will be able to support multiple codecs. No functional change. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> [fparent@baylibre.com: Adapt to 3.14+] Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: simple-card: Improve coding styleNicolin Chen
Improve indentation and space. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: simple-card: Simplify error msg in simple_card_dai_link_of()Nicolin Chen
It would look better to use prop instead. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: simple-card: Drop node->name checkingNicolin Chen
The current simple-card driver limits the DT node name to "sound". Any of other names is forbidden while actually we should allow DT to pass other node names. And if this function is being called, the node must already have the compatible "simple-audio-card" in DTB. So there should be no need to check the name here. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: fsl: Drop formats limitation for imx-pcm-dma.cNicolin Chen
Now ASoC core is getting the intersection of supported formats not only from CPU and CODEC dai's but also from DMA's. However, there should be no specific width limitation from SDMA side. So drop it. Otherwise, we would only support S16_LE format for all i.MX platforms. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: fsl_spdif: Add core clock control for DMA accessNicolin Chen
Regmap is able to enable/disable the core clock automatically each time it's going to access the registers. But for DMA cases during playback or recording, it's totally beyong control of regmap. So we have to open the clock manually. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24arm/mach-vexpress: array accessed out of boundsHeinrich Schuchardt
dcscb_allcpus_mask is an array of size 2. The index variable cluster has to be checked against this limit before accessing the array. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24clk: vexpress: NULL dereference on error pathDan Carpenter
If the allocation fails then we dereference the NULL in the error path. Just return directly. Fixes: ed27ff1db869 ('clk: Versatile Express clock generators ("osc") driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24drm/i915: Allow full PPGTT with param overrideBen Widawsky
When PPGTT was disabled by default, the patch also prevented the user from overriding this behavior via module parameter. Being able to test this on arbitrary kernels is extremely beneficial to track down the remaining bugs. The patch that prevented this was: commit 93a25a9e2d67765c3092bfaac9b855d95e39df97 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Mar 6 09:40:43 2014 +0100 drm/i915: Disable full ppgtt by default By default PPGTT is set to -1. 0 means off, 1 means aliasing only, 2 means full, all other values are reserved. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-04-24drm/i915: Discard BIOS framebuffers too small to accommodate chosen modeChris Wilson
If the inherited BIOS framebuffer is smaller than the mode selected for fbdev, then if we continue to use it then we cause display corruption as we do not setup the panel fitter to upscale. Regression from commit d978ef14456a38034f6c0e94a794129501f89200 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Mar 7 08:57:51 2014 -0800 drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12 v2: Add a debug message to track the discard of the BIOS fb. v3: Ville pointed out the difference between ref/unref Reported-by: Knut Petersen <Knut_Petersen@t-online.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-04-24ASoC: Intel: Cancel hsw_notification_work before freeing the streamJarkko Nikula
I suppose there is a possibility that hsw_notification_work() may run after sst_hsw_stream_free() which can lead to a kernel crash since struct sst_hsw_stream is freed at that point and stream = container_of(work, struct sst_hsw_stream, notify_work) is not valid when hsw_notification_work() is run. Reported-by: Derek Basehore <dbasehore@chromium.org> Reported-by: Wenkai Du <wenkai.du@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: imx-audmux: Fix section mismatchLars-Peter Clausen
audmux_debugfs_init() is marked as __init, but is called from imx_audmux_probe() which is not marked as __init. This creates a section mismatch and a potential runtime crash (if imx_audmux_probe() is called after the .init section was dropped). This patch removes the __init annotation from audmux_debugfs_init(), which fixes the following warning: WARNING: sound/soc/built-in.o(.text+0x86960): Section mismatch in reference from the function imx_audmux_probe() to the function .init.text:audmux_debugfs_init() Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24HID: multitouch: add support of EliteGroup 05D8 panelsTomas Sokorai
They need to have the class SERIAL. Note: it is a Win 7 panel, not Win 8 certified. Signed-off-by: Tomas Sokorai <tsokorai@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-24drm/vmwgfx: Make sure user-space can't DMA across buffer object boundaries v2Thomas Hellstrom
We already check that the buffer object we're accessing is registered with the file. Now also make sure that we can't DMA across buffer object boundaries. v2: Code commenting update. Cc: stable@vger.kernel.org Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2014-04-24perf/x86: Fix RAPL rdmsrl_safe() usageStephane Eranian
This patch fixes a bug introduced by: 24223657806a ("perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMU") The rdmsrl_safe() function returns 0 on success. The current code was failing to detect the RAPL PMU on real hardware (missing /sys/devices/power) because the return value of rdmsrl_safe() was misinterpreted. Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Venkatesh Srinivas <venkateshs@google.com> Cc: peterz@infradead.org Cc: zheng.z.yan@intel.com Link: http://lkml.kernel.org/r/20140423170418.GA12767@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-24PNP: Work around BIOS defects in Intel MCH area reportingBjorn Helgaas
Work around BIOSes that don't report the entire Intel MCH area. MCHBAR is not an architected PCI BAR, so MCH space is usually reported as a PNP0C02 resource. The MCH space was once 16KB, but is 32KB in newer parts. Some BIOSes still report a PNP0C02 resource that is only 16KB, which means the rest of the MCH space is consumed but unreported. This can cause resource map sanity check warnings or (theoretically) a device conflict if we assigned the unreported space to another device. The Intel perf event uncore driver tripped over this when it claimed the MCH region: resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:01 Info: mapping multiple BARs. Your kernel is fine. To prevent this, if we find a PNP0C02 resource that covers part of the MCH space, extend it to cover the entire space. References: http://lkml.kernel.org/r/20140224162400.GE16457@pd.tnic Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Stephane Eranian <eranian@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-23Input: synaptics - add min/max quirk for ThinkPad Edge E431Hans de Goede
Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-23Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Various fixes and post-merge window updates. Included here are: - ensure Kconfig things which should be sorted remain sorted - fix three big-endian bugs which crept in during the last merge window - add the renameat2 syscall - fix big.LITTLE switcher initialisation checks - fix kdump vmcore for LPAE kernels" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: add renameat2 syscall ARM: keep arch/arm/Kconfig and arch/arm/mm/Kconfig select entries sorted ARM: 8033/1: fix big endian __pv_phys_pfn_offset size related issue ARM: 8032/1: bL_switcher: fix validation check before its activation ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfo ARM: 8027/1: fix do_div() bug in big-endian systems ARM: 8026/1: Fix emulation of multiply accumulate instructions ARM: 8024/1: Keep DEBUG_UART_{PHYS,VIRT} entries sorted
2014-04-23staging: comedi: usbdux: bug fix for accessing 'ao_chanlist' in private dataH Hartley Sweeten
In usbdux_ao_cmd(), the channels for the command are transfered from the cmd->chanlist and stored in the private data 'ao_chanlist'. The channel numbers are bit-shifted when stored so that they become the "command" that is transfered to the device. The channel to command conversion results in the 'ao_chanlist' having these values for the channels: channel 0 -> ao_chanlist = 0x00 channel 1 -> ao_chanlist = 0x40 channel 2 -> ao_chanlist = 0x80 channel 3 -> ao_chanlist = 0xc0 The problem is, the usbduxsub_ao_isoc_irq() function uses the 'chan' value from 'ao_chanlist' to access the 'ao_readback' array in the private data. So instead of accessing the array as 0, 1, 2, 3, it accesses it as 0x00, 0x40, 0x80, 0xc0. Fix this by storing the raw channel number in 'ao_chanlist' and doing the bit-shift when creating the command. Fixes: a998a3db530bff80 "staging: comedi: usbdux: cleanup the private data 'outBuffer'" Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: Bernd Porr <mail@berndporr.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-23locks: rename FL_FILE_PVT and IS_FILE_PVT to use "*_OFDLCK" insteadJeff Layton
File-private locks have been re-christened as "open file description" locks. Finish the symbol name cleanup in the internal implementation. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-23net: filter: initialize A and X registersAlexei Starovoitov
exisiting BPF verifier allows uninitialized access to registers, 'ret A' is considered to be a valid filter. So initialize A and X to zero to prevent leaking kernel memory In the future BPF verifier will be rejecting such filters Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Daniel Borkmann <dborkman@redhat.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23net: Update my email addressBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23vxlan: ensure to advertise the right fdb remoteNicolas Dichtel
The goal of this patch is to fix rtnelink notification. The main problem was about notification for fdb entry with more than one remote. Before the patch, when a remote was added to an existing fdb entry, the kernel advertised the first remote instead of the added one. Also when a remote was removed from a fdb entry with several remotes, the deleted remote was not advertised. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23net/phy: micrel: fix bugged test on device tree loading for ksz9021Hubert Chaumette
In ksz9021_load_values_from_of() val2 to val4 aren't tested against their initialization value. This causes the test to always succeed, and this value to be used as if it was loaded from the devicetree instead of being ignored, in case of a missing/invalid property in the ethernet OF device node. As a result, the value "0" is written to the relevant registers. Change the conditions to test against the right initialization value. Signed-off-by: Hubert Chaumette <hchaumette@adeneo-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23ARM: OMAP2+: Fix GPMC remap for devices using an offsetTony Lindgren
At least the smc91x driver expects the device to be at 0x300 offset from bus base address. This does not work currently for GPMC when booted in device tree mode as it attempts to remap the the allocated GPMC partition to the address configured by the device tree plus the device offset. Note that this works just fine when booted with legacy mode. Let's fix the issue by just ignoring any device specific offset while remapping. And let's make sure the remap address confirms to the GPMC 16MB minimum granularity as listed in the TRM for GPMC_CONFIG7 BASEADDRESS bits. Otherwise we can get something like this: omap-gpmc 6e000000.gpmc: cannot remap GPMC CS 1 to 0x01000300 Cc: Pekon Gupta <pekon@ti.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "The main change is that we now publish "firmware ID" for the serio devices to help userspace figure out the kind of touchpads it is dealing with: i8042 will export PS/2 port's PNP IDs as firmware IDs. You will also get more quirks for Synaptics touchpads in various Lenovo laptops, a change to elantech driver to recognize even more models, and fixups to wacom and couple other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - add support for newer elantech touchpads Input: soc_button_array - fix a crash during rmmod Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga and X1 Input: synaptics - report INPUT_PROP_TOPBUTTONPAD property Input: Add INPUT_PROP_TOPBUTTONPAD device property Input: i8042 - add firmware_id support Input: serio - add firmware_id sysfs attribute Input: wacom - handle 1024 pressure levels in wacom_tpc_pen Input: wacom - references to 'wacom->data' should use 'unsigned char*' Input: wacom - override 'pressure_max' with value from HID_USAGE_PRESSURE Input: wacom - use full 32-bit HID Usage value in switch statement Input: wacom - missed the last bit of expresskey for DTU-1031 Input: ads7846 - fix device usage within attribute show Input: da9055_onkey - remove use of regmap_irq_get_virq()
2014-04-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull radeon drm fixes from Dave Airlie: "This is just radeon fixes, primarily the two pll fix and the aux fix, it also disables dpm on rv770 gpus, fixes driver reloading, and fixes two issues with runtime PM on some GPUS" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: don't allow runpm=1 on systems with out ATPX drm/radeon: fix ATPX detection on non-VGA GPUs drm/radeon/pm: don't walk the crtc list before it has been initialized (v2) drm/radeon: properly unregister hwmon interface (v2) drm/radeon: fix count in cik_sdma_ring_test() drm/radeon/aux: fix hpd assignment for aux bus drm/radeon: improve PLL limit handling in post div calculation drm/radeon: use fixed PPL ref divider if needed drm/radeon: disable dpm on rv770 by default
2014-04-23sh-pfc: r8a7791: Fix definition of MOD_SEL3Phil Edworthy
There is a missing 0 entry from the MOD_SEL3 table. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-23sh-pfc: r8a7790: Fix definition of IPSR5Guido Piasenza
The extra entry in the table makes SCIFA0_B, and all peripherals after it, fail. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-23pinctrl: single: Clear pin interrupts enabled by bootloaderTony Lindgren
Since we set up device wake-up interrupts as pinctrl-single interrupts, we now must use the standard request_irq and related functions to manage them. If the pin interrupts are enabled for some pins at boot, the wake-up events can show up as constantly pending at least on omaps and will hang the system unless the related device driver clears the event at the device. To fix this, let's clear the interrupt flags during init, and print out a warning so the board maintainers can update their drivers to do proper request_irq for the driver specific wake-up events. Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-23Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: * Fix memory leak and backward compatibility macros for pevent filter enums in traceevent library (Steven Rostedt) * Disable libdw unwind for all but x86 arch (Jiri Olsa) * Fix memory leak in sample_ustack (Masanari Iida) Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-23arm: dma-mapping: Fix mapping size valueRitesh Harjani
68efd7d2fb("arm: dma-mapping: remove order parameter from arm_iommu_create_mapping()") is causing kernel panic because it wrongly sets the value of mapping->size: Unable to handle kernel NULL pointer dereference at virtual address 000000a0 pgd = e7a84000 [000000a0] *pgd=00000000 ... PC is at bitmap_clear+0x48/0xd0 LR is at __iommu_remove_mapping+0x130/0x164 Fix it by correcting mapping->size value. Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2014-04-23Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/bfin5xx', ↵Mark Brown
'spi/fix/hspi' and 'spi/fix/sirf' into spi-linus
2014-04-23Merge remote-tracking branch 'regulator/fix/pbias' into regulator-linusMark Brown
2014-04-23Merge remote-tracking branch 'regulator/fix/core' into regulator-linusMark Brown
2014-04-23ASoC: core: Don't break component searching if both id and num_dai are 0Nicolin Chen
The commit e41975ed (ASoC: core: Fix the DAI name getting) added a break within the "if (id < 0 || id >= pos->num_dai)" while the original design of the search didn't break the loop if that condition contented but only mark the ret error and let it go on to search the next component. In a case like dmaengine which's not a dai but as a component sharing an identical name with a dai, both the id and pos->num_dai here could be 0. If we break the search, we may never find the dai we want as it might be placed behind its dmaengine in the component list. So this patch fixes the issue above by following the original design to let the search carry on. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23ASoC: ak4104: Add regulator to documentationDaniel Mack
Add the vdd supply to Documentation/devicetree/bindings/sound/ak4104.txt. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23ASoC: ak4104: add regulator consumer supportDaniel Mack
The AK4104 has only one power supply, called VDD. Enable it as long as the codec is in use. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23ASoC: simple-card: Move dai-link level properties away from dai subnodesJyri Sarha
The properties like format, bitclock-master, frame-master, bitclock-inversion, and frame-inversion should be common to the dais connected with a dai-link. For bitclock-master and frame-master properties to be unambiguous they need to indicate the mastering dai node with a phandle. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23ASoC: core: Update snd_soc_of_parse_daifmt() interfaceJyri Sarha
Adds struct device_node **bitclkmaster and struct device_node **framemaster function parameters. With the new syntax bitclock-master and frame-master properties can explicitly indicate the dai-link bit-clock and frame masters with a phandle. This patch also makes the minimal changes to simple-card for it to work with the updated snd_soc_of_parse_daifmt(). Simple-card appears to be the only user of snd_soc_of_parse_daifmt() for now. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23dt: Fix binding typos in clock-names and interrupt-namesGeert Uytterhoeven
s/interrupts-names/interrupt-names/g s/clocks-names/clock-names/g Some of the binding files and device tree files get this wrong and the kernel won't be able to pick it up. Fix them up now so that they don't get widely used. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by : Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-04-23ASoC: samsung: Don't clear clock setting during i2s_startupTushar Behera
In exiting kernel, if DAIFMT flags are set in dai_link and I2S is set to run in master mode, the I2S clocks are not getting configured resulting in no output. Existing code clears the current I2S clock settings during i2s_startup and requires that the clocks are reconfigured. It then assumes that sound-card driver would call snd_soc_dai_{set_sysclk/set_fmt} to configure the root clock. 1. Since I2S clock settings remain fixed for a board, it would be better to set the clocks once during sound-card probe. 2. Also if the DAIFMT flags are set in dai_link, snd_soc_dai_set_fmt is called during DAI probe. If both these conditions are true, then I2S clock remains unconfigured during audio playback. Fix this by removing the code to clear rclk_srcrate in i2s_startup. Instead, reset this during DAI probe. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23tools lib traceevent: Fix memory leak in pretty_print()Steven Rostedt
Commit 12e55569a244 "tools lib traceevent: Use helper trace-seq in print functions like kernel does" added a extra trace_seq helper to process string arguments like the kernel does it. But the difference between the kernel and the userspace library is that the kernel's trace_seq structure has a static allocated buffer. The userspace one has a dynamically allocated one. It requires a trace_seq_destroy(), otherwise it produces a nasty memory leak. Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20140422192330.6bb09bf8@gandalf.local.home Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-23tools lib traceevent: Fix backward compatibility macros for pevent filter enumsSteven Rostedt
The return value for pevent_filter_match() is suppose to return FILTER_NONE if the event doesn't have a filter, and FILTER_NOEXIST if there is no filter at all. But the change 41e12e580a7 "tools lib traceevent: Refactor pevent_filter_match() to get rid of die()" replaced the return value with PEVENT_ERRNO__* values and added "backward compatibility" macros that used the old names. Unfortunately, the NOEXIST and NONE macros were swapped, and this broke users that use the old return names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20140421222346.0351ced4@gandalf.local.home Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-23perf tools: Disable libdw unwind for all but x86 archJiri Olsa
So far there's only x86 libdw unwind support merged in perf. Disable it on all other architectures in case libdw unwind support is detected in system. Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1397988006-14158-1-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-23perf tests x86: Fix memory leak in sample_ustack()Masanari Iida
The buf is not freed, when kernel failed to get stack map and return. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Link: http://lkml.kernel.org/r/1398091024-7901-1-git-send-email-standby24x7@gmail.com Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-23ASoC: jz4740: Improve build test coverageLars-Peter Clausen
Allow the jz4740 audio drivers to be build when CONFIG_COMPILE_TEST is selected. This should improve the build test coverage. There is one small piece of platform dependent code in the jz4740-i2s driver. It uses the DMA request type constants which are defined in a platform specific header. We can solve this by moving them from the platform specific header to the I2S driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23ASoC: qi_lb60: Use GPIO descriptor APILars-Peter Clausen
The new GPIO descriptor API is now the preferred way for handling GPIOs. It also allows us to separate the platform depended code from the platform independent code (Which will make it possible to increase build test coverage of the platform independent code). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-14 22:29:03 +0000