summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-02drm/omap: Substitute format_is_yuv() with format->is_yuvAyan Kumar Halder
drm_format_info table has a field 'is_yuv' to denote if the format is yuv or not. The driver is expected to use this instead of having a function for the same purpose. Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-10-02drm/omap: partial workaround for DRA7xx DMM errata i878Tomi Valkeinen
Errata i878 says that MPU should not be used to access RAM and DMM at the same time. As it's not possible to prevent MPU accessing RAM, we need to access DMM via a proxy. This patch changes DMM driver to access DMM registers via sDMA. Instead of doing a normal readl/writel call to read/write a register, we use sDMA to copy 4 bytes from/to the DMM registers. This patch provides only a partial workaround for i878, as not only DMM register reads/writes are affected, but also accesses to the DMM mapped buffers (framebuffers, usually). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2018-10-02drm/omap: dmm_tiler: Fix interrupt request/free sequence during probe/removePeter Ujfalusi
The interrupts should be enabled after the driver initialization to avoid early interrupts while the driver is not yet ready to handle them. On removal the interrupts must be disabled before other resources are released, freed up. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-10-02drm/omap: dmm_tiler: No need to check if irq is valid in omap_dmm_removePeter Ujfalusi
The driver probe would fail if the irq is not available. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-10-02drm/omap: fix memory barrier bug in DMM driverTomi Valkeinen
A DMM timeout "timed out waiting for done" has been observed on DRA7 devices. The timeout happens rarely, and only when the system is under heavy load. Debugging showed that the timeout can be made to happen much more frequently by optimizing the DMM driver, so that there's almost no code between writing the last DMM descriptors to RAM, and writing to DMM register which starts the DMM transaction. The current theory is that a wmb() does not properly ensure that the data written to RAM is observable by all the components in the system. This DMM timeout has caused interesting (and rare) bugs as the error handling was not functioning properly (the error handling has been fixed in previous commits): * If a DMM timeout happened when a GEM buffer was being pinned for display on the screen, a timeout error would be shown, but the driver would continue programming DSS HW with broken buffer, leading to SYNCLOST floods and possible crashes. * If a DMM timeout happened when other user (say, video decoder) was pinning a GEM buffer, a timeout would be shown but if the user handled the error properly, no other issues followed. * If a DMM timeout happened when a GEM buffer was being released, the driver does not even notice the error, leading to crashes or hang later. This patch adds wmb() and readl() calls after the last bit is written to RAM, which should ensure that the execution proceeds only after the data is actually in RAM, and thus observable by DMM. The read-back should not be needed. Further study is required to understand if DMM is somehow special case and read-back is ok, or if DRA7's memory barriers do not work correctly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2018-10-02drm/omap: remove set but not used variable 'frame_height'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/omapdrm/dss/dispc.c: In function 'dispc_ovl_setup_common': drivers/gpu/drm/omapdrm/dss/dispc.c:2627:19: warning: variable 'frame_height' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-10-02drm/omap: Use ERR_CAST directly instead of ERR_PTR(PTR_ERR())zhong jiang
We prefer to use ERR_CAST to do so. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-10-02drm/omap: remove unused header tcm-sita.hCorentin Labbe
tcm-sita.h is unused since commit 0d6fa53fd805 ("drm/omap: Use bitmaps for TILER placement") Let's remove it. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-10-01drm/fsl-dcu: use drm_display_mode_to_videomode to calculate timing parametersSatendra Singh Thakur
Use the drm_display_mode_to_videomode function to calculate front/ back porches and sync length. Cc: Madhur Verma <madhur.verma@samsung.com> Cc: Hemanshu Srivastava <hemanshu.s@samsung.com> Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-2-stefan@agner.ch
2018-10-01drm/fsl-dcu: drop unused drm_crtc_index()Stefan Agner
The result of drm_crtc_index() is unused. Remove the call and the unused variable. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-1-stefan@agner.ch
2018-10-01video/hdmi: Constify infoframe passed to the log functionsVille Syrjälä
The log functions don't modify the passed in infoframe so make it const. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-4-ville.syrjala@linux.intel.com Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
2018-10-01video/hdmi: Pass buffer size to infoframe unpack functionsVille Syrjälä
To make sure the infoframe unpack functions don't end up examining stack garbage or oopsing, let's pass in the size of the buffer. v2: Convert tda1997x.c as well (kbuild test robot) Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-3-ville.syrjala@linux.intel.com Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
2018-10-01video/hdmi: Constify 'buffer' to the unpack functionsVille Syrjälä
The unpack functions just read from the passed in buffer, so make it const. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-2-ville.syrjala@linux.intel.com Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
2018-10-01drm/tilcdc: Convert drm_atomic_helper_suspend/resume()Souptick Joarder
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). saved_state in tilcdc_drm_private will not be used anymore, so it can be removed. Signed-off-by: Ajit Negi <ajitn.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2018-10-01drm: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. For drm_modes.c, the full node path is already printed out, so printing just the node name a 2nd time is redundant and can be removed. Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Acked-by: Rob Clark <robdclark@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180928225044.20132-1-robh@kernel.org
2018-10-01drm/bochs: Replace drm_gem_object_unreference_unlocked with put functionThomas Zimmermann
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. v2: * rebase onto fbdev rework Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20180926113623.22679-1-tzimmermann@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-01drm/exynos: mixer: Make plane alpha configurableChristoph Manszewski
The mixer hardware supports variable plane alpha. Currently planes are opaque, make this configurable. Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913 using modetest. Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-10-01drm/exynos: mixer: Make pixel blend mode configurableChristoph Manszewski
The mixer hardware supports both premultiplied alpha and non-premultiplied alpha. Currently premultiplied alpha is default, make this configurable. Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913 using modetest. Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-10-01drm/exynos: drm_plane: Correct exynos_drm_plane_resetChristoph Manszewski
Make use of helper functions in exynos_drm_plane_reset in order to set all default values. Currently alpha isn't set during reset. Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-10-01drm/exynos: gsc: Add support for tiled formatsMarek Szyprowski
Add support for 16x16 tiled NV12 and NV21 formats. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-10-01drm/exynos: scaler: Add support for tiled formatsAndrzej Pietrasiewicz
Add support for 16x16 tiled formats: NV12/NV21, YUYV and YUV420. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixed line over 80 characters warning Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-30Linux 4.19-rc6v4.19-rc6Greg Kroah-Hartman
2018-09-30Merge tag 'auxdisplay-for-greg-v4.19-rc6' of https://github.com/ojeda/linuxGreg Kroah-Hartman
Miguel writes: "A trivial fix for auxdisplay - MAINTAINERS reference fix for moved file Reported by Joe Perches" * tag 'auxdisplay-for-greg-v4.19-rc6' of https://github.com/ojeda/linux: MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
2018-09-30Merge tag 'libnvdimm-fixes2-4.19-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Dan writes: "filesystem-dax for 4.19-rc6 Fix a deadlock in the new for 4.19 dax_lock_mapping_entry() routine." * tag 'libnvdimm-fixes2-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix deadlock in dax_lock_mapping_entry()
2018-09-30MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.cMiguel Ojeda
Commit 51c1e9b554c9 ("auxdisplay: Move panel.c to drivers/auxdisplay folder") moved the file, but the MAINTAINERS reference was not updated. Link: https://lore.kernel.org/lkml/20180928220131.31075-1-joe@perches.com/ Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-09-30drm/zte: Replace drm_dev_unref with drm_dev_putThomas Zimmermann
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180926120650.25614-1-tzimmermann@suse.de
2018-09-29Merge tag 'for-linus-20180929' of git://git.kernel.dk/linux-blockGreg Kroah-Hartman
Jens writes: "Block fixes for 4.19-rc6 A set of fixes that should go into this release. This pull request contains: - A fix (hopefully) for the persistent grants for xen-blkfront. A previous fix from this series wasn't complete, hence reverted, and this one should hopefully be it. (Boris Ostrovsky) - Fix for an elevator drain warning with SMR devices, which is triggered when you switch schedulers (Damien) - bcache deadlock fix (Guoju Fang) - Fix for the block unplug tracepoint, which has had the timer/explicit flag reverted since 4.11 (Ilya) - Fix a regression in this series where the blk-mq timeout hook is invoked with the RCU read lock held, hence preventing it from blocking (Keith) - NVMe pull from Christoph, with a single multipath fix (Susobhan Dey)" * tag 'for-linus-20180929' of git://git.kernel.dk/linux-block: xen/blkfront: correct purging of persistent grants Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" blk-mq: I/O and timer unplugs are inverted in blktrace bcache: add separate workqueue for journal_write to avoid deadlock xen/blkfront: When purging persistent grants, keep them in the buffer block: fix deadline elevator drain for zoned block devices blk-mq: Allow blocking queue tag iter callbacks nvme: properly propagate errors in nvme_mpath_init
2018-09-29Merge branch 'x86-urgent-for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Thomas writes: "A single fix for the AMD memory encryption boot code so it does not read random garbage instead of the cached encryption bit when a kexec kernel is allocated above the 32bit address limit." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Fix kexec booting failure in the SEV bit detection code
2018-09-29Merge branch 'timers-urgent-for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Thomas writes: "Three small fixes for clocksource drivers: - Proper error handling in the Atmel PIT driver - Add CLOCK_SOURCE_SUSPEND_NONSTOP for TI SoCs so suspend works again - Fix the next event function for Facebook Backpack-CMM BMC chips so usleep(100) doesnt sleep several milliseconds" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-atmel-pit: Properly handle error cases clocksource/drivers/fttmr010: Fix set_next_event handler clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs
2018-09-29Merge branch 'perf-urgent-for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Thomas writes: "A single fix for a missing sanity check when a pinned event is tried to be read on the wrong CPU due to a legit event scheduling failure." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Add sanity check to deal with pinned event failure
2018-09-29Merge tag 'pm-4.19-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Rafael writes: "Power management fix for 4.19-rc6 Fix incorrect __init and __exit annotations in the Qualcomm Kryo cpufreq driver (Nathan Chancellor)." * tag 'pm-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: qcom-kryo: Fix section annotations
2018-09-29cpufreq: qcom-kryo: Fix section annotationsNathan Chancellor
There is currently a warning when building the Kryo cpufreq driver into the kernel image: WARNING: vmlinux.o(.text+0x8aa424): Section mismatch in reference from the function qcom_cpufreq_kryo_probe() to the function .init.text:qcom_cpufreq_kryo_get_msm_id() The function qcom_cpufreq_kryo_probe() references the function __init qcom_cpufreq_kryo_get_msm_id(). This is often because qcom_cpufreq_kryo_probe lacks a __init annotation or the annotation of qcom_cpufreq_kryo_get_msm_id is wrong. Remove the '__init' annotation from qcom_cpufreq_kryo_get_msm_id so that there is no more mismatch warning. Additionally, Nick noticed that the remove function was marked as '__init' when it should really be marked as '__exit'. Fixes: 46e2856b8e18 (cpufreq: Add Kryo CPU scaling driver) Fixes: 5ad7346b4ae2 (cpufreq: kryo: Add module remove and exit) Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-29Merge tag 'dma-mapping-4.19-3' of git://git.infradead.org/users/hch/dma-mappingGreg Kroah-Hartman
Christoph writes: "dma mapping fix for 4.19-rc6 fix a missing Kconfig symbol for commits introduced in 4.19-rc" * tag 'dma-mapping-4.19-3' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration
2018-09-28Merge branch 'for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for v4.19-rc5 Just a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - allow for max == min during input_absinfo validation Input: elantech - enable middle button of touchpad on ThinkPad P72 Input: atakbd - fix Atari CapsLock behaviour Input: atakbd - fix Atari keymap Input: egalax_ts - add system wakeup support Input: gpio-keys - fix a documentation index issue
2018-09-28Merge tag 'spi-fix-v4.19-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Mark writes: "spi: Fixes for v4.19 Quite a few fixes for the Renesas drivers in here, plus a fix for the Tegra driver and some documentation fixes for the recently added spi-mem code. The Tegra fix is relatively large but fairly straightforward and mechanical, it runs on probe so it's been reasonably well covered in -next testing." * tag 'spi-fix-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-mem: Move the DMA-able constraint doc to the kerneldoc header spi: spi-mem: Add missing description for data.nbytes field spi: rspi: Fix interrupted DMA transfers spi: rspi: Fix invalid SPI use during system suspend spi: sh-msiof: Fix handling of write value for SISTR register spi: sh-msiof: Fix invalid SPI use during system suspend spi: gpio: Fix copy-and-paste error spi: tegra20-slink: explicitly enable/disable clock
2018-09-28Merge tag 'regulator-v4.19-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Mark writes: "regulator: Fixes for 4.19 A collection of fairly minor bug fixes here, a couple of driver specific ones plus two core fixes. There's one fix for the new suspend state code which fixes some confusion with constant values that are supposed to indicate noop operation and another fixing a race condition with the creation of sysfs files on new regulators." * tag 'regulator-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: fix crash caused by null driver data regulator: Fix 'do-nothing' value for regulators without suspend state regulator: da9063: fix DT probing with constraints regulator: bd71837: Disable voltage monitoring for LDO3/4
2018-09-28Merge tag 'powerpc-4.19-3' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Michael writes: "powerpc fixes for 4.19 #3 A reasonably big batch of fixes due to me being away for a few weeks. A fix for the TM emulation support on Power9, which could result in corrupting the guest r11 when running under KVM. Two fixes to the TM code which could lead to userspace GPR corruption if we take an SLB miss at exactly the wrong time. Our dynamic patching code had a bug that meant we could patch freed __init text, which could lead to corrupting userspace memory. csum_ipv6_magic() didn't work on little endian platforms since we optimised it recently. A fix for an endian bug when reading a device tree property telling us how many storage keys the machine has available. Fix a crash seen on some configurations of PowerVM when migrating the partition from one machine to another. A fix for a regression in the setup of our CPU to NUMA node mapping in KVM guests. A fix to our selftest Makefiles to make them work since a recent change to the shared Makefile logic." * tag 'powerpc-4.19-3' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix Makefiles for headers_install change powerpc/numa: Use associativity if VPHN hcall is successful powerpc/tm: Avoid possible userspace r1 corruption on reclaim powerpc/tm: Fix userspace r13 corruption powerpc/pseries: Fix unitialized timer reset on migration powerpc/pkeys: Fix reading of ibm, processor-storage-keys property powerpc: fix csum_ipv6_magic() on little endian platforms powerpc/powernv/ioda2: Reduce upper limit for DMA window size (again) powerpc: Avoid code patching freed init sections KVM: PPC: Book3S HV: Fix guest r11 corruption with POWER9 TM workarounds
2018-09-28Merge tag 'pinctrl-v4.19-4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Linus writes: "Pin control fixes for v4.19: - Fixes to x86 hardware: - AMD interrupt debounce issues - Faulty Intel cannonlake register offset - Revert pin translation IRQ locking" * tag 'pinctrl-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: Revert "pinctrl: intel: Do pin translation when lock IRQ" pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant pinctrl/amd: poll InterruptEnable bits in amd_gpio_irq_set_type
2018-09-28perf/core: Add sanity check to deal with pinned event failureReinette Chatre
It is possible that a failure can occur during the scheduling of a pinned event. The initial portion of perf_event_read_local() contains the various error checks an event should pass before it can be considered valid. Ensure that the potential scheduling failure of a pinned event is checked for and have a credible error. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Cc: acme@kernel.org Cc: gavin.hindman@intel.com Cc: jithu.joseph@intel.com Cc: dave.hansen@intel.com Cc: hpa@zytor.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/6486385d1f30336e9973b24c8c65f5079543d3d3.1537377064.git.reinette.chatre@intel.com
2018-09-28Merge tag 'drm-fixes-2018-09-28' of git://anongit.freedesktop.org/drm/drmGreg Kroah-Hartman
Dave writes: "drm fixes for 4.19-rc6 Looks like a pretty normal week for graphics, core: syncobj fix, panel link regression revert amd: suspend/resume fixes, EDID emulation fix mali-dp: NV12 writeback and vblank reset fixes etnaviv: DMA setup fix" * tag 'drm-fixes-2018-09-28' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Fix Edid emulation for linux drm/amd/display: Fix Vega10 lightup on S3 resume drm/amdgpu: Fix vce work queue was not cancelled when suspend Revert "drm/panel: Add device_link from panel device to DRM device" drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set drm/malidp: Fix writeback in NV12 drm: mali-dp: Call drm_crtc_vblank_reset on device init drm/etnaviv: add DMA configuration for etnaviv platform device
2018-09-28Merge tag 'riscv-for-linus-4.19-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Palmer writes: "A Single RISC-V Update for 4.19-rc6 The Debian guys have been pushing on our port and found some unversioned symbols leaking into modules. This PR contains a single fix for that issue." * tag 'riscv-for-linus-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: include linux/ftrace.h in asm-prototypes.h
2018-09-28Merge tag 'pci-v4.19-fixes-2' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Bjorn writes: "PCI fixes: - Fix ACPI hotplug issue that causes black screen crash at boot (Mika Westerberg) - Fix DesignWare "scheduling while atomic" issues (Jisheng Zhang) - Add PPC contacts to MAINTAINERS for PCI core error handling (Bjorn Helgaas) - Sort Mobiveil MAINTAINERS entry (Lorenzo Pieralisi)" * tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge PCI: dwc: Fix scheduling while atomic issues MAINTAINERS: Move mobiveil PCI driver entry where it belongs MAINTAINERS: Update PPC contacts for PCI core error handling
2018-09-28Merge branch 'nvme-4.19' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull NVMe fix from Christoph. * 'nvme-4.19' of git://git.infradead.org/nvme: nvme: properly propagate errors in nvme_mpath_init
2018-09-28xen/blkfront: correct purging of persistent grantsJuergen Gross
Commit a46b53672b2c2e3770b38a4abf90d16364d2584b ("xen/blkfront: cleanup stale persistent grants") introduced a regression as purged persistent grants were not pu into the list of free grants again. Correct that. Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"Jens Axboe
Fix didn't work for all cases, reverting to add a (hopefully) better fix. This reverts commit f151ba989d149bbdfc90e5405724bbea094f9b17. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328Heiko Stuebner
The rk3328 uses a dw-hdmi controller with an external hdmi phy from Innosilicon which uses the generic phy framework for access. Add the necessary data and the compatible for the rk3328 to the rockchip dw-hdmi driver. changes in v5: - disable CEC_5V option to make CEC actually work (Jonas) changes in v3: - reword as suggested by Rob to show that it's a dw-hdmi + Inno phy Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Zheng Yang <zhengyang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-7-heiko@sntech.de
2018-09-28drm/rockchip: dw_hdmi: store rockchip_hdmi reference in phy_data objectHeiko Stuebner
When using special phy handling operations we'll often need access to the rockchip_hdmi struct. As the chip-data that occupies the phy_data pointer initially gets assigned to the rockchip_hdmi struct, we can now re-use this phy_data pointer to hold the reference to the rockchip_hdmi struct and use this reference later on. Inspiration for this comes from meson and sunxi dw-hdmi, which are using the same method. changes in v3: - reword commit message Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Zheng Yang <zhengyang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-6-heiko@sntech.de
2018-09-28drm/rockchip: dw_hdmi: allow including external physHeiko Stuebner
Some variants of the dw-hdmi on Rockchip socs use a separate phy block accessed via the generic phy framework, so allow them to be included if such a phy reference is found. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Zheng Yang <zhengyang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-5-heiko@sntech.de
2018-09-28dt-bindings: allow optional phys in Rockchip dw_hdmi bindingHeiko Stuebner
Some newer Rockchip SoCs use an Innosilicon hdmiphy accessed via general mmio, so allow these to be referenced via the regular phy interfaces and therefore add optional phy-related properties to the binding. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-4-heiko@sntech.de
2018-09-28drm/rockchip: dw_hdmi: Allow outputs that don't need output switchingHeiko Stuebner
So far we always encountered socs with 2 output crtcs needing the driver to tell the hdmi block which output to connect to. But there also exist socs with only one crtc like the rk3228, rk3328 and rk3368. So adapt the register field to simply carry a negative value to signal that no output-switching is necessary. changes in v3: - fixed wording issue found by Robin Murphy Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Zheng Yang <zhengyang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-3-heiko@sntech.de
generated by cgit (git 2.34.1) at 2025-09-12 05:15:29 +0000