summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-13Merge tag 'linux-can-fixes-for-5.4-20191113' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-11-13 this is a pull request of 9 patches for net/master, hopefully for the v5.4 release cycle. All nine patches are by Oleksij Rempel and fix locking and use-after-free bugs in the j1939 stack found by the syzkaller syzbot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13Merge branch 'net-macb-convert-to-phylink'David S. Miller
Antoine Tenart says: ==================== net: macb: convert to phylink This series converts the MACB Ethernet driver to the Phylink framework. The MAC configuration is moved to the Phylink ops and Phylink helpers are now used in the ethtools functions. This helps to access the flow control and pauseparam logic and this will be helpful in the future for boards using this controller with SFP cages. Since v2: - Moved the Tx and Rx buffer initialization rework to its own patch. Since v1: - Stopped using state->link in mac_config and moved macb_set_tx_clk to the link_up helper.. - Fixed the node given to phylink_of_phy_connect. - Removed netif_carrier_off from macb_open. - Fixed the macb_get_wol logic. - Rewored macb_ioctl as suggested. - Added a call to phylink_destroy in macb_remove. - Fixed the suspend/resume case by calling phylink_start/stop in the resume/suspend helpers. I had to take the rtnl lock to do this, which might be something to discuss. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13net: macb: convert to phylinkAntoine Tenart
This patch converts the MACB Ethernet driver to the Phylink framework. The MAC configuration is moved to the Phylink ops and Phylink helpers are now used in the ethtools functions. This helps to access the flow control and pauseparam logic and this will be helpful in the future for boards using this controller with SFP cages. Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13net: macb: move the Tx and Rx buffer initialization into a functionAntoine Tenart
This patch moves the Tx and Rx buffer initialization into its own function. This does not modify the behaviour of the driver and will be helpful to convert the driver to phylink. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13net: axienet: In kconfig remove arch dependency for axi_emacRadhey Shyam Pandey
To enable xilinx axi_emac driver support on zynqmp ultrascale platform (ARCH64) there are two choices, mention ARCH64 as a dependency list and other is to check if this ARCH dependency list is really needed. Later approach seems more reasonable, so remove the obsolete ARCH dependency list for the axi_emac driver. Sanity test done for microblaze, zynq and zynqmp ultrascale platform. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2019-11-13 1) Remove a unnecessary net_exit function from the xfrm interface. From Xin Long. 2) Assign xfrm4_udp_encap_rcv to a UDP socket only if xfrm is configured. From Alexey Dobriyan. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2019-11-13 1) Fix a page memleak on xfrm state destroy. 2) Fix a refcount imbalance if a xfrm_state gets invaild during async resumption. From Xiaodong Xu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13KVM: Forbid /dev/kvm being opened by a compat task when CONFIG_KVM_COMPAT=nMarc Zyngier
On a system without KVM_COMPAT, we prevent IOCTLs from being issued by a compat task. Although this prevents most silly things from happening, it can still confuse a 32bit userspace that is able to open the kvm device (the qemu test suite seems to be pretty mad with this behaviour). Take a more radical approach and return a -ENODEV to the compat task. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13KVM: X86: Reset the three MSR list number variables to 0 in kvm_init_msr_list()Xiaoyao Li
When applying commit 7a5ee6edb42e ("KVM: X86: Fix initialization of MSR lists"), it forgot to reset the three MSR lists number varialbes to 0 while removing the useless conditionals. Fixes: 7a5ee6edb42e (KVM: X86: Fix initialization of MSR lists) Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13selftests: kvm: fix build with glibc >= 2.30Vitaly Kuznetsov
Glibc-2.30 gained gettid() wrapper, selftests fail to compile: lib/assert.c:58:14: error: static declaration of ‘gettid’ follows non-static declaration 58 | static pid_t gettid(void) | ^~~~~~ In file included from /usr/include/unistd.h:1170, from include/test_util.h:18, from lib/assert.c:10: /usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here 34 | extern __pid_t gettid (void) __THROW; | ^~~~~~ Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13kvm: x86: disable shattered huge page recovery for PREEMPT_RT.Paolo Bonzini
If a huge page is recovered (and becomes no executable) while another thread is executing it, the resulting contention on mmu_lock can cause latency spikes. Disabling recovery for PREEMPT_RT kernels fixes this issue. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.Yunhao Tian
The datasheet of V3s (and various other chips) wrote that TCON0_DCLK_DIV can be >= 1 if only dclk is used, and must >= 6 if dclk1 or dclk2 is used. As currently neither dclk1 nor dclk2 is used (no writes to these bits), let's set minimal division to 1. If this minimal division is 6, some common dot clock frequencies can't be produced (e.g. 30MHz will not be possible and will fallback to 25MHz), which is obviously not an expected behaviour. Signed-off-by: Yunhao Tian <t123yh@outlook.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
2019-11-13x86/resctrl: Fix potential lockdep warningXiaochen Shen
rdtgroup_cpus_write() and mkdir_rdt_prepare() call rdtgroup_kn_lock_live() -> kernfs_to_rdtgroup() to get 'rdtgrp', and then call the rdt_last_cmd_{clear,puts,...}() functions which will check if rdtgroup_mutex is held/requires its caller to hold rdtgroup_mutex. But if 'rdtgrp' returned from kernfs_to_rdtgroup() is NULL, rdtgroup_mutex is not held and calling rdt_last_cmd_{clear,puts,...}() will result in a self-incurred, potential lockdep warning. Remove the rdt_last_cmd_{clear,puts,...}() calls in these two paths. Just returning error should be sufficient to report to the user that the entry doesn't exist any more. [ bp: Massage. ] Fixes: 94457b36e8a5 ("x86/intel_rdt: Add diagnostics when writing the cpus file") Fixes: cfd0f34e4cd5 ("x86/intel_rdt: Add diagnostics when making directories") Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: pei.p.jia@intel.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1573079796-11713-1-git-send-email-xiaochen.shen@intel.com
2019-11-13scripts/tools-support-relr.sh: un-quote variablesIlie Halip
When the CC variable contains quotes, e.g. when using ccache (make CC="ccache <compiler>"), this script always fails, so CONFIG_RELR is never enabled, even when the toolchain supports this feature. Removing the /dev/null redirect and invoking the script manually shows the issue: $ CC='/usr/bin/ccache clang' ./scripts/tools-support-relr.sh ./scripts/tools-support-relr.sh: 7: ./scripts/tools-support-relr.sh: /usr/bin/ccache clang: not found Fix this by un-quoting the variables. Before: $ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \ NM=llvm-nm OBJCOPY=llvm-objcopy defconfig $ grep RELR .config CONFIG_ARCH_HAS_RELR=y With this change: $ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \ NM=llvm-nm OBJCOPY=llvm-objcopy defconfig $ grep RELR .config CONFIG_TOOLS_SUPPORT_RELR=y CONFIG_ARCH_HAS_RELR=y CONFIG_RELR=y Fixes: 5cf896fb6be3 ("arm64: Add support for relocating the kernel with RELR relocations") Reported-by: Dmitry Golovin <dima@golovin.in> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://github.com/ClangBuiltLinux/linux/issues/769 Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-13ALSA: pcm: Fix stream lock usage in snd_pcm_period_elapsed()paulhsia
If the nullity check for `substream->runtime` is outside of the lock region, it is possible to have a null runtime in the critical section if snd_pcm_detach_substream is called right before the lock. Signed-off-by: paulhsia <paulhsia@chromium.org> Link: https://lore.kernel.org/r/20191112171715.128727-2-paulhsia@chromium.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-13ALSA: usb-audio: not submit urb for stopped endpointHenry Lin
While output urb's snd_complete_urb() is executing, calling prepare_outbound_urb() may cause endpoint stopped before prepare_outbound_urb() returns and result in next urb submitted to stopped endpoint. usb-audio driver cannot re-use it afterwards as the urb is still hold by usb stack. This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again to let snd_complete_urb() know the endpoint already stopped and does not submit next urb. Below kind of error will be fixed: [ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1 [ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error Signed-off-by: Henry Lin <henryl@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-13can: j1939: warn if resources are still linked on destroyOleksij Rempel
j1939_session_destroy() and __j1939_priv_release() should be called only if session, ecu or socket are not linked or used by any one else. If at least one of these resources is linked, then the reference counting is broken somewhere. This warning will be triggered before KASAN will do, and will make it easier to debug initial issue. This works on platforms without KASAN support. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: j1939_can_recv(): add priv refcountingOleksij Rempel
j1939_can_recv() can be called in parallel with socket release. In this case sk_release and sk_destruct can be done earlier than j1939_can_recv() is processed. Reported-by: syzbot+ca172a0ac477ac90f045@syzkaller.appspotmail.com Reported-by: syzbot+07ca5bce8530070a5650@syzkaller.appspotmail.com Reported-by: syzbot+a47537d3964ef6c874e1@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: transport: j1939_cancel_active_session(): use ↵Oleksij Rempel
hrtimer_try_to_cancel() instead of hrtimer_cancel() This part of the code protected by lock used in the hrtimer as well. Using hrtimer_cancel() will trigger dead lock. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: make sure socket is held as long as session existsOleksij Rempel
We link the socket to the session to be able provide socket specific notifications. For example messages over error queue. We need to keep the socket held, while we have a reference to it. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: transport: make sure the aborted session will be deactivated ↵Oleksij Rempel
only once j1939_session_cancel() was modifying session->state without protecting it by locks and without checking actual state of the session. This patch moves j1939_tp_set_rxtimeout() into j1939_session_cancel() and adds the missing locking. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: socket: rework socket locking for j1939_sk_release() and ↵Oleksij Rempel
j1939_sk_sendmsg() j1939_sk_sendmsg() should be protected by lock_sock() to avoid race with j1939_sk_bind() and j1939_sk_release(). Reported-by: syzbot+afd421337a736d6c1ee6@syzkaller.appspotmail.com Reported-by: syzbot+6d04f6a1b31a0ae12ca9@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: main: j1939_ndev_to_priv(): avoid crash if can_ml_priv is NULLOleksij Rempel
This patch avoids a NULL pointer deref crash if ndev->ml_priv is NULL. Reported-by: syzbot+95c8e0d9dffde15b6c5c@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: move j1939_priv_put() into sk_destruct callbackOleksij Rempel
This patch delays the j1939_priv_put() until the socket is destroyed via the sk_destruct callback, to avoid use-after-free problems. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: af_can: export can_sock_destruct()Oleksij Rempel
In j1939 we need our own struct sock::sk_destruct callback. Export the generic af_can can_sock_destruct() that allows us to chain-call it. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13Merge branch 'master' of git://blackhole.kfki.hu/nf-nextPablo Neira Ayuso
Jozsef Kadlecsik says: ==================== ipset patches for nf-next - Add wildcard support to hash:net,iface which makes possible to match interface prefixes besides complete interfaces names, from Kristian Evensen. ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-11-13netfilter: nft_payload: add C-VLAN supportPablo Neira Ayuso
If the encapsulated ethertype announces another inner VLAN header and the offset falls within the boundaries of the inner VLAN header, then adjust arithmetics to include the extra VLAN header length and fetch the bytes from the vlan header in the skbuff data area that represents this inner VLAN header. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-11-13netfilter: nf_tables_offload: pass extack to nft_flow_cls_offload_setup()Pablo Neira Ayuso
Otherwise this leads to a stack corruption. Fixes: c5d275276ff4 ("netfilter: nf_tables_offload: add nft_flow_cls_offload_setup()") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-11-13netfilter: nf_tables: add nft_payload_rebuild_vlan_hdr()Pablo Neira Ayuso
Wrap the code to rebuild the ethernet + vlan header into a function. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Florian Westphal <fw@strlen.de>
2019-11-13netfilter: nft_payload: simplify vlan header handlingPablo Neira Ayuso
If the offset is within the ethernet + vlan header size boundary, then rebuild the ethernet + vlan header and use it to copy the bytes to the register. Otherwise, subtract the vlan header size from the offset and fall back to use skb_copy_bits(). There is one corner case though: If the offset plus the length of the payload instruction goes over the ethernet + vlan header boundary, then, fetch as many bytes as possible from the rebuilt ethernet + vlan header and fall back to copy the remaining bytes through skb_copy_bits(). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Florian Westphal <fw@strlen.de>
2019-11-13netfilter: nft_meta: offload support for interface indexPablo Neira Ayuso
This patch adds support for offloading the NFT_META_IIF selector. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-11-13perf/core: Fix missing static inline on perf_cgroup_switch()Ben Dooks (Codethink)
It looks like a "static inline" has been missed in front of the empty definition of perf_cgroup_switch() under certain configurations. Fixes the following sparse warning: kernel/events/core.c:1035:1: warning: symbol 'perf_cgroup_switch' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20191106132527.19977-1-ben.dooks@codethink.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13perf/core: Consistently fail fork on allocation failuresAlexander Shishkin
Commit: 313ccb9615948 ("perf: Allocate context task_ctx_data for child event") makes the inherit path skip over the current event in case of task_ctx_data allocation failure. This, however, is inconsistent with allocation failures in perf_event_alloc(), which would abort the fork. Correct this by returning an error code on task_ctx_data allocation failure and failing the fork in that case. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20191105075702.60319-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13perf/aux: Disallow aux_output for kernel eventsAlexander Shishkin
Commit ab43762ef0109 ("perf: Allow normal events to output AUX data") added 'aux_output' bit to the attribute structure, which relies on AUX events and grouping, neither of which is supported for the kernel events. This notwithstanding, attempts have been made to use it in the kernel code, suggesting the necessity of an explicit hard -EINVAL. Fix this by rejecting attributes with aux_output set for kernel events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20191030134731.5437-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13perf/core: Reattach a misplaced commentAlexander Shishkin
A comment is in a wrong place in perf_event_create_kernel_counter(). Fix that. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20191030134731.5437-2-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13perf/aux: Fix the aux_output group inheritance fixAlexander Shishkin
Commit f733c6b508bc ("perf/core: Fix inheritance of aux_output groups") adds a NULL pointer dereference in case inherit_group() races with perf_release(), which causes the below crash: > BUG: kernel NULL pointer dereference, address: 000000000000010b > #PF: supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 3b203b067 P4D 3b203b067 PUD 3b2040067 PMD 0 > Oops: 0000 [#1] SMP KASAN > CPU: 0 PID: 315 Comm: exclusive-group Tainted: G B 5.4.0-rc3-00181-g72e1839403cb-dirty #878 > RIP: 0010:perf_get_aux_event+0x86/0x270 > Call Trace: > ? __perf_read_group_add+0x3b0/0x3b0 > ? __kasan_check_write+0x14/0x20 > ? __perf_event_init_context+0x154/0x170 > inherit_task_group.isra.0.part.0+0x14b/0x170 > perf_event_init_task+0x296/0x4b0 Fix this by skipping over events that are getting closed, in the inheritance path. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: f733c6b508bc ("perf/core: Fix inheritance of aux_output groups") Link: https://lkml.kernel.org/r/20191101151248.47327-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13perf/core: Disallow uncore-cgroup eventsPeter Zijlstra
While discussing uncore event scheduling, I noticed we do not in fact seem to dis-allow making uncore-cgroup events. Such events make no sense what so ever because the cgroup is a CPU local state where uncore counts across a number of CPUs. Disallow them. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-12Merge branch 'ARM-Enable-GENET-support-for-RPi-4'David S. Miller
Stefan Wahren says: ==================== ARM: Enable GENET support for RPi 4 Raspberry Pi 4 uses the broadcom genet chip in version five. This chip has a dma controller integrated. Up to now the maximal burst size was hard-coded to 0x10. But it turns out that Raspberry Pi 4 does only work with the smaller maximal burst size of 0x8. Additionally the patch series has some IRQ retrieval improvements and adds support for a missing PHY mode. This series based on Matthias Brugger's V1 series [1]. [1] - https://patchwork.kernel.org/cover/11186193/ Changes in V5: - address Doug's comment Changes in V4: - rebased on current net-next - remove RGMII_ID support - remove fixes tag from patch 1 - add Florian's suggestions to patch 5 Changes in V3: - introduce SoC-specific compatibles for GENET (incl. dt-binding) - use platform_get_irq_optional for optional IRQ - remove Fixes tag from IRQ error handling change - move most of MDIO stuff to bcm2711.dtsi Changes in V2: - add 2 fixes for IRQ retrieval - add support for missing PHY modes - declare PHY mode RGMII RXID based on the default settings - add alias to allow firmware append the MAC address ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Add RGMII_RXID supportStefan Wahren
This adds the missing support for the PHY mode RGMII_RXID. It's necessary for the Raspberry Pi 4. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Refactor register access in bcmgenet_mii_configStefan Wahren
The register access in bcmgenet_mii_config() is a little bit opaque and not easy to extend. In preparation for the missing RGMII PHY modes move all the phy name assignments into the switch statement and the register access to the end of the function. This make the code easier to read and extend. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Add BCM2711 supportStefan Wahren
The BCM2711 needs a different maximum DMA burst length. If not set accordingly a timeout in the transmit queue happens and no package can be sent. So use the new compatible to derive this value. Until now the GENET HW version was used as the platform identifier. This doesn't work with SoC-specific modifications, so introduce a proper platform data structure. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12dt-bindings: net: bcmgenet: Add BCM2711 supportStefan Wahren
The BCM2711 has some modifications to the GENET v5. So add this SoC specific compatible. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Fix error handling on IRQ retrievalStefan Wahren
This fixes the error handling for the mandatory IRQs. There is no need for the error message anymore, this is now handled by platform_get_irq. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Avoid touching non-existent interruptStefan Wahren
As platform_get_irq() now prints an error when the interrupt does not exist, we are getting a confusing error message in case the optional WOL IRQ is not defined: bcmgenet fd58000.ethernet: IRQ index 2 not found Fix this by using the platform_get_irq_optional(). Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: dsa: sja1105: Print the reset reasonVladimir Oltean
Sometimes it can be quite opaque even for me why the driver decided to reset the switch. So instead of adding dump_stack() calls each time for debugging, just add a reset reason to sja1105_static_config_reload calls which gets printed to the console. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12Merge branch 'Implement-get_link_ksettings-for-VXLAN-and-bridge'David S. Miller
Matthias Schiffer says: ==================== Implement get_link_ksettings for VXLAN and bridge Mesh routing protocol batman-adv (in particular the new BATMAN_V algorithm) uses the link speed reported by get_link_ksettings to determine a path metric for wired links. In the mesh framework Gluon [1], we layer VXLAN and sometimes bridge interfaces on our Ethernet links. These patches implement get_link_ksettings for these two interface types. While this is obviously not accurate for bridges with multiple active ports, it's much better than having no estimate at all (and in the particular setup of Gluon, bridges with a single port aren't completely uncommon). [1] https://github.com/freifunk-gluon/gluon ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12bridge: implement get_link_ksettings ethtool methodMatthias Schiffer
We return the maximum speed of all active ports. This matches how the link speed would give an upper limit for traffic to/from any single peer if the bridge were replaced with a hardware switch. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12vxlan: implement get_link_ksettings ethtool methodMatthias Schiffer
Similar to VLAN and similar drivers, we can forward get_link_ksettings to the lower dev if we have one to get meaningful speed/duplex data. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12dpaa2-eth: free already allocated channels on probe deferIoana Ciornei
The setup_dpio() function tries to allocate a number of channels equal to the number of CPUs online. When there are not enough DPCON objects already probed, the function will return EPROBE_DEFER. When this happens, the already allocated channels are not freed. This results in the incapacity of properly probing the next time around. Fix this by freeing the channels on the error path. Fixes: d7f5a9d89a55 ("dpaa2-eth: defer probe on object allocate") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: dsa: Prevent usage of NET_DSA_TAG_8021Q as tagging protocolFlorian Fainelli
It is possible for a switch driver to use NET_DSA_TAG_8021Q as a valid DSA tagging protocol since it registers itself as such, unfortunately since there are not xmit or rcv functions provided, the lack of a xmit() function will lead to a NPD in dsa_slave_xmit() to start with. net/dsa/tag_8021q.c is only comprised of a set of helper functions at the moment, but is not a fully autonomous or functional tagging "driver" (though it could become later on). We do not have any users of NET_DSA_TAG_8021Q so now is a good time to make sure there are not issues being encountered by making this file strictly a place holder for helper functions. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 03:53:59 +0000