summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-08ARM: dts: omap5-uevm: Split SMPS10 in two nodesKishon Vijay Abraham I
SMPS10 has two outputs OUT1 and OUT2. Hence SMPS10 is modeled as two regulators. The DT node is split to reflect it. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: AM33xx: Correct gpio #interrupt-cells propertyLars Poeschel
Following commit ff5c9059 and therefore other omap platforms using the gpio-omap driver correct the #interrupt-cells property on am33xx too. The omap gpio binding documentaion also states that the #interrupt-cells property should be 2. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: AM33XX: Add PMU supportAlexandre Belloni
ARM Performance Monitor Units are available on the am33xx, add the support in the dtsi. Tested with perf and oprofile on a regular beaglebone. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: omap3-igep0030: add mux conf for GPIO LEDJavier Martinez Canillas
The IGEP COM MOdule has a GPIO LED connected to OMAP pins. Configure this pin as output GPIO. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: omap3-igep0020: add mux conf for GPIO LEDsJavier Martinez Canillas
The IGEPv2 has a number of GPIO LED connected to OMAP pins. Configure these pins as output GPIO. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: omap3-igep: add pinmux node for GPIO LED configurationJavier Martinez Canillas
IGEP boards have a number of LED connected to OMAP or TWL GPIO lines. The actual wiring is different on each board so each board DT has need to configure the mux correctly. Even though it works with the current DT, the kernel complains with: [2.305023] leds-gpio leds.18: pins are not configured from the driver Add an empty pinmux_leds_pins pinctrl child node so boards can override with the correct mux configuration and not depend on default values for the GPIO LEDs to work. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: N900: Add device treePavel Machek
This adds device tree with necessary support to boot with functional video (on both emulator and real N900 device). Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruckOliver Schinagl
Cubietech introduced a new cubieboard, the CubieTruck. This board added more output connectors and features 2 GiB of RAM and a Gigabit PHY. Tested are are uart0 and LEDS which both work as expected. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-10-08ALSA: hda - hdmi: Fix channel map switch not taking effectAnssi Hannula
Currently hdmi_setup_audio_infoframe() reprograms the HDA channel mapping only when the infoframe is not up-to-date or the non-PCM flag has changed. However, when just the channel map has been changed, the infoframe may still be up-to-date and non-PCM flag may not have changed, so the new channel map is not actually programmed into the HDA codec. Notably, this failing case is also always triggered when the device is already in a prepared state and a new channel map is configured while changing only the channel positions (for example, plain "speaker-test -c2 -m FR,FL"). Fix that by always programming the channel map in hdmi_setup_audio_infoframe(). Tested on Intel HDMI. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-08drm/nouveau/mc: disable msi support by default, it's busted in tons of placesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-10-08Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * The libaudit test was failing in some systems due to a unescaped newline, fix it so that the 'trace' tool can be built in such systems. * Fix installation of libexec components. * Add default handler for mmap2 events so that tools that don't explicitely define an MMAP2 handler don't crash, fix from David Ahern. * Fix to find line information for probe list, from Masami Hiramatsu. * Set child_pid after perf_evlist__prepare_workload(), fix from Namhyung Kim. * Fix infinite loop on invalid perf.data file, from Namhyung Kim. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-08ARM: shmobile: bockw: fixup ether node namingKuninori Morimoto
According to the ePAPR spec, the node name should be "ethernet", not "lan0". Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7779: add irqpin default status on DTSIKuninori Morimoto
r8a7779 INTC needs IRL pin mode settings to determine behavior of IRQ0 - IRQ3. But it depends on platform. This patch adds status = "disabled" on r8a7779.dtsi as default Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: marzen: fixup SMSC IRQ number on DTSKuninori Morimoto
This patch fixup miss-setting of SMSC IRQ number. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: bockw: add SMSC support on DTSKuninori Morimoto
This patch enables INTC IRQ and SMSC on BockW board via DT. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7778: add renesas_intc_irqpin support on DTSIKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 SMP device tree nodeMagnus Damm
Add a device node for the r8a7791 secondary CPU core. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 Arch timer device tree nodeMagnus Damm
Add r8a7791 arch timer device tree information. This needs to be used together with r8a7791 support code that ties in the R-Car Gen2 arch timer workarounds. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 IRQC device tree nodeMagnus Damm
Enable a r8a7791 IRQC block by adding a device tree node for the IRQC hardware and pins IRQ0 to IRQ9. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfacesGuennadi Liakhovetski
Add SDHI0 and MMCIF interfaces to armadillo800eva-reference with regulators and pin configurations. SDHI1 is not added yet, because the switch, that connects the interface either to an SD slot or to a WiFi SDIO card cannot be described in DT yet. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: armadillo-reference: Add PWM backlight node to DTLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a73a4: add a DT node for the DMACGuennadi Liakhovetski
Add a DT node for the only system DMAC instance on r8a73a4. The RT DMAC can be added later under the same multiplexer, because they can serve the same slaves and use the same MID-RID values. Configuration data is supplied to the driver, using a compatibility match string. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7790: add I2C DT nodesGuennadi Liakhovetski
Add DT nodes for the four I2C interfacces on r8a7790. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boardsGuennadi Liakhovetski
Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08Merge tag 'renesas-soc-for-v3.13' into dt2-baseSimon Horman
Renesas ARM based SoC updates for v3.13 * Add support for r8a7791 SoC * Rename DU device in clock lookups list of r8a7779 SoC * USB and SSI/SRU clock support for r8a7778 SoC * USB phy power control function support for r8a7778 SoC
2013-10-07powerpc/irq: Don't switch to irq stack from softirq stackBenjamin Herrenschmidt
irq_exit() is now called on the irq stack, which can trigger a switch to the softirq stack from the irq stack. If an interrupt happens at that point, we will not properly detect the re-entrancy and clobber the original return context on the irq stack. This fixes it. The side effect is to prevent all nesting from softirq stack to irq stack even in the "safe" case but it's simpler that way and matches what x86_64 does. Reported-by: Cédric Le Goater <clg@fr.ibm.com> Tested-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-07ARM: tegra: add vcc supply for nct1008 to CardhuWei Ni
Add vcc-supply property in the nct1008 node, and set it as sys_3v3_reg. change the name of this node to temp-sensor. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-07ARM: tegra: add DT entry for nct1008 to DalmoreWei Ni
Enable thermal sensor nct1008 for Tegra114 dalmore. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-07Merge tag 'renesas-dt-for-v3.13' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Renesas ARM-based SoC DT updates for v3.13 * Add CPU cores to DTSI of r8a7790 SoC * Add MMCIF and SDHI DT nodes for reference DTS of ape6evm board * tag 'renesas-dt-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Add r8a7790 CA7 CPU cores to DTSI ARM: shmobile: Add r8a7790 CA15 CPU cores ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-07Merge tag 'ux500-devicetree-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt From Linus Walleij: Second part of the Ux500 devicetree conversion and ATAG deletion: this fixes bugs discovered when switching to a devicetree-only setup, primarily on the HREF prototypes. The biggest change is to split into four DTS variants as the UIB autodetection was lost. * tag 'ux500-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS ARM: ux500: register the tc35892 GPIO on the TVK UIB ARM: ux500: split the HREF DTS files from two to four ARM: ux500: split HREF UIB files ARM: ux500: move TC35892 at 0x42 to hrefprev60 ARM: ux500: correct CD for micro SD on hrev60plus ARM: ux500: fix proximity sensor button ARM: ux500: correct I2C address of ambient light sensor ARM: ux500 enable the AB8500 gpio for all HREFs ARM: ux500: add default trigger on HREF LED Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix for hidraw reference counting regression, by Manoj Chourasia - fix for minor number allocation for uhid, by David Herrmann - other small unsorted fixes / device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wiimote: fix FF deadlock HID: add Holtek USB ID 04d9:a081 SHARKOON DarkGlider HID: hidraw: close underlying device at removal of last reader HID: roccat: Fix "cannot create duplicate filename" problems HID: uhid: allocate static minor
2013-10-07Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull Tile bugfixes from Chris Metcalf: "This fixes some serious issues with PREEMPT support, and a couple of smaller corner-case issues fixed in the last couple of weeks" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch: tile: re-use kbasename() helper tile: use a more conservative __my_cpu_offset in CONFIG_PREEMPT tile: ensure interrupts disabled for preempt_schedule_irq() tile: change lock initalization in hardwall tile: include: asm: use 'long long' instead of 'u64' for atomic64_t and its related functions
2013-10-07HID: wiimote: fix FF deadlockDavid Herrmann
The input core has an internal spinlock that is acquired during event injection via input_event() and friends but also held during FF callbacks. That means, there is no way to share a lock between event-injection and FF handling. Unfortunately, this is what is required for wiimote state tracking and what we do with state.lock and input->lock. This deadlock can be triggered when using continuous data reporting and FF on a wiimote device at the same time. I takes me at least 30m of stress-testing to trigger it but users reported considerably shorter times (http://bpaste.net/show/132504/) when using some gaming-console emulators. The real problem is that we have two copies of internal state, one in the wiimote objects and the other in the input device. As the input-lock is not supposed to be accessed from outside of input-core, we have no other chance than offloading FF handling into a worker. This actually works pretty nice and also allows to implictly merge fast rumble changes into a single request. Due to the 3-layered workers (rumble+queue+l2cap) this might reduce FF responsiveness. Initial tests were fine so lets fix the race first and if it turns out to be too slow we can always handle FF out-of-band and skip the queue-worker. Cc: <stable@vger.kernel.org> # 3.11+ Reported-by: Thomas Schneider Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-07Merge remote-tracking branch 'spi/fix/s3c64xx' into spi-linusMark Brown
2013-10-07Merge remote-tracking branch 'spi/fix/pxa' into spi-linusMark Brown
2013-10-07Merge remote-tracking branch 'spi/fix/mpc512x' into spi-linusMark Brown
2013-10-07Merge remote-tracking branch 'spi/fix/hspi' into spi-linusMark Brown
2013-10-07Merge remote-tracking branch 'spi/fix/dspi' into spi-linusMark Brown
2013-10-07Merge remote-tracking branch 'spi/fix/clps711x' into spi-linusMark Brown
2013-10-07MIPS: stack protector: Fix per-task canary switchJames Hogan
Commit 1400eb6 (MIPS: r4k,octeon,r2300: stack protector: change canary per task) was merged in v3.11 and introduced assembly in the MIPS resume functions to update the value of the current canary in __stack_chk_guard. However it used PTR_L resulting in a load of the canary value, instead of PTR_LA to construct its address. The value is intended to be random but is then treated as an address in the subsequent LONG_S (store). This was observed to cause a fault and panic: CPU 0 Unable to handle kernel paging request at virtual address 139fea20, epc == 8000cc0c, ra == 8034f2a4 Oops[#1]: ... $24 : 139fea20 1e1f7cb6 ... Call Trace: [<8000cc0c>] resume+0xac/0x118 [<8034f2a4>] __schedule+0x5f8/0x78c [<8034f4e0>] schedule_preempt_disabled+0x20/0x2c [<80348eec>] rest_init+0x74/0x84 [<804dc990>] start_kernel+0x43c/0x454 Code: 3c18804b 8f184030 8cb901f8 <af190000> 00c0e021 8cb002f0 8cb102f4 8cb202f8 8cb302fc This can also be forced by modifying arch/mips/include/asm/stackprotector.h so that the default __stack_chk_guard value is more likely to be a bad (or unaligned) pointer. Fix it to use PTR_LA instead, to load the address of the canary value, which the LONG_S can then use to write into it. Reported-by: bobjones (via #mipslinux on IRC) Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gregory Fong <gregory.0xf0@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6026/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-07spi: atmel: Fix incorrect error pathSachin Kamat
'irq' was not released when clk_prepare_enable failed. Fix it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-07ALSA: hda - Fix mono speakers and headset mic on Dell Vostro 5470David Henningsson
On this machine, DAC on node 0x03 seems to give mono output. Also, it needs additional patches for headset mic support. It supports CTIA style headsets only. Alsa-info available at the bug link below. Cc: stable@kernel.org (v3.10+) BugLink: https://bugs.launchpad.net/bugs/1236228 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of bux fixes, notable are the regression with ptrace vs restarting system calls and the patch for kdump to be able to copy from virtual memory" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix system call restart after inferior call s390: Allow vmalloc target buffers for copy_from_oldmem() s390/sclp: properly detect line mode console s390/kprobes: add exrl to list of prohibited opcodes s390/3270: fix return value check in tty3270_resize_work()
2013-10-07Merge tag 'drm-intel-fixes-2013-10-07' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: Just a few important fixes, all cc: stable (I've checked this time around and made sure they're really there ...). The dpms one is a regression from the modeset rework and has a good chance to rectify Linus' hdmi issues. * tag 'drm-intel-fixes-2013-10-07' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Only apply DPMS to the encoder if enabled drm/i915: Mask LPSP to get PSR working even with Power Well in use by audio. drm/i915/hsw: Disable L3 caching of atomic memory operations. drm/i915: fix rps.vlv_work initialization
2013-10-06Linux 3.12-rc4v3.12-rc4Linus Torvalds
2013-10-06net: Update the sysctl permissions handler to test effective uid/gidEric W. Biederman
Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reported-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target fixes queued up for v3.12-rc4 code. The highlights include: - Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC - Allow sess_cmd_map allocation failure fallback to use vzalloc - Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends - Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non zero scsi_status bug - Make iscsi-target do acknowledgement tag release from RX context - Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags Also included is a iscsi-target patch CC'ed for v3.10+ that avoids legacy wait_for_task=true release during fast-past StatSN acknowledgement, and two other SRP target related patches that address long-standing issues that are CC'ed for v3.3+. Extra thanks to Thomas Glanzmann for his testing feedback with COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags iscsi-target: Perform release of acknowledged tags from RX context iscsi-target: Only perform wait_for_tasks when performing shutdown target: Fail on non zero scsi_status in compare_and_write_callback target: Fix recursive COMPARE_AND_WRITE callback failure target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size ib_srpt: always set response for task management target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag ib_srpt: Destroy cm_id before destroying QP. target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02
2013-10-06Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "Here is the slave dmanegine fixes. We have the fix for deadlock issue on imx-dma by Michael and Josh's edma config fix along with author change" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-dma: fix callback path in tasklet dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA edma: Update author email address
2013-10-06x86/reboot: Add reboot quirk for Dell Latitude E5410Ville Syrjälä
Dell Latitude E5410 needs reboot=pci to actually reboot. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://lkml.kernel.org/r/1380888964-14517-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This is a small collection of fixes, including a regression fix from Liu Bo that solves rare crashes with compression on. I've merged my for-linus up to 3.12-rc3 because the top commit is only meant for 3.12. The rest of the fixes are also available in my master branch on top of my last 3.11 based pull" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: Fix crash due to not allocating integrity data for a bioset Btrfs: fix a use-after-free bug in btrfs_dev_replace_finishing Btrfs: eliminate races in worker stopping code Btrfs: fix crash of compressed writes Btrfs: fix transid verify errors when recovering log tree
generated by cgit (git 2.34.1) at 2025-09-12 09:26:43 +0000