| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit f49449fbc21e7e9550a5203902d69c8ae7dfd918.
This commit breaks u_ether on some setups (at least Merrifield). The fix
"usb: gadget: u_ether: Re-attach netif device to mirror detachment" party
restores u-ether. However the netif usb: remains up even usb is switched
from device to host mode. This creates problems for user space as the
interface remains in the routing table while not realy present and network
managers (connman) not detecting a network change.
Various attempts to find the root cause were unsuccesful up to now. Therefore
revert until a solution is found.
Link: https://lore.kernel.org/linux-usb/20231006141231.7220-1-hgajjar@de.adit-jv.com/
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reported-by: Ferry Toth <fntoth@gmail.com>
Fixes: f49449fbc21e ("usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach")
Cc: stable@vger.kernel.org
Signed-off-by: Ferry Toth <fntoth@gmail.com>
Link: https://lore.kernel.org/r/20240620204832.24518-3-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 76c945730cdffb572c7767073cc6515fd3f646b4.
Prerequisite revert for the reverting of the original commit f49449fbc21e.
Fixes: 76c945730cdf ("usb: gadget: u_ether: Re-attach netif device to mirror detachment")
Fixes: f49449fbc21e ("usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach")
Reported-by: Ferry Toth <fntoth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ferry Toth <fntoth@gmail.com>
Link: https://lore.kernel.org/r/20240620204832.24518-2-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use dev_err_probe() to log errors in the probe function of all drm
mediatek drivers. This avoids -EPROBE_DEFER return values from being
logged as errors, like the following:
mediatek-disp-rdma 1c002000.rdma: Failed to add component: -517
As a side benefit it also standardizes the format of the error in the
log messages.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240606-mtk-disp-rdma-dev-err-probe-v2-1-3898621767b8@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
This driver users the component model and shutdown happens in the base
driver. The "drvdata" for this driver will always be valid if
shutdown() is called and as of commit 2a073968289d
("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop")
we don't need to confirm that "drm" is non-NULL.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240611102744.v2.1.I2b014f90afc4729b6ecc7b5ddd1f6dedcea4625b@changeid/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to
vchiq_state") adds a parameter to vchiq_debugfs_init, but leaves the
dummy implementation in the !CONFIG_DEBUG_FS case untouched, causing a
compile time error.
Fixes: c3552ab19aeb ("staging: vchiq_debugfs: Fix NPD in vchiq_dump_state")
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240627124419.2498642-1-bero@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a Coverity error that less-than-zero comparison of an unsigned value
is never true.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240614034937.23978-1-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
DSB_STATUS bit 16 is supposed to be a sticky bit informing us whether
the DSB was idle or not when the pipe's delayed vblank (when double
buffered registers latch) occurred. Unfortunately it turns out this
is a level triggred signal, ie. the bit will be set whenever the
DSB is busy during the scanline window between start of delayed
vblank and vtotal. Try to document that fact by renaming the bit.
Sadly this also thwarts my plan to use this bit to sanity check
that the (to be introduced) DSB based vblank evasion did its job
correctly. That would require an edge triggered signal instead.
So looks like we'll have to rely mostly on luck instead :(
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611133344.30673-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains two Netfilter fixes for net:
Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR
to move the sysctl toggle to enable SRv6 netfilter hooks from
nf_conntrack to the core, from Jianguo Wu.
Patch #2 fixes a possible pointer leak to userspace due to insufficient
validation of NFT_DATA_VALUE.
Linus found this pointer leak to userspace via zdi-disclosures@ and
forwarded the notice to Netfilter maintainers, he appears as reporter
because whoever found this issue never approached Netfilter
maintainers neither via security@ nor in private.
netfilter pull request 24-06-27
* tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n
====================
Link: https://patch.msgid.link/20240626233845.151197-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function adev_release
calls kfree(madev). We shouldn't call kfree(madev) again
in the error handling path. Set 'madev' to NULL.
Fixes: a69839d4327d ("net: mana: Add support for auxiliary device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Current code configures GCR3 even when device is attached to identity
domain. So that we can support SVA with identity domain. This means in
attach device path it updates Guest Translation related bits in DTE.
Commit de111f6b4f6a ("iommu/amd: Enable Guest Translation after reading
IOMMU feature register") missed to enable Control[GT] bit in resume
path. Its causing certain laptop to fail to resume after suspend.
This is because we have inconsistency between between control register
(GT is disabled) and DTE (where we have enabled guest translation related
bits) in resume path. And IOMMU hardware throws ILLEGAL_DEV_TABLE_ENTRY.
Fix it by enabling GT bit in resume path.
Reported-by: Błażej Szczygieł <spaz16@wp.pl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218975
Fixes: de111f6b4f6a ("iommu/amd: Enable Guest Translation after reading IOMMU feature register")
Tested-by: Błażej Szczygieł <spaz16@wp.pl>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240621101533.20216-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When a domain is attached to a device, the required cache tags are
assigned to the domain so that the related caches can be flushed
whenever it is needed. The device TLB cache tag is created based
on whether the ats_enabled field of the device's iommu data is set.
This creates an ordered dependency between cache tag assignment and
ATS enabling.
The device TLB cache tag would not be created if device's ATS is
enabled after the cache tag assignment. This causes devices with PCI
ATS support to malfunction.
The ATS control is exclusively owned by the iommu driver. Hence, move
cache_tag_assign_domain() after PCI ATS enabling to make sure that the
device TLB cache tag is created for the domain.
Fixes: 3b1d9e2b2d68 ("iommu/vt-d: Add cache tag assignment interface")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240620062940.201786-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 87a6f1f22c97 ("iommu/amd: Introduce per-device domain ID to fix
potential TLB aliasing issue") introduced per device domain ID when
domain is configured with v2 page table. And in invalidation path, it
uses per device structure (dev_data->gcr3_info.domid) to get the domain ID.
In detach_device() path, current code tries to invalidate IOMMU cache
after removing dev_data from domain device list. This means when domain
is configured with v2 page table, amd_iommu_domain_flush_all() will not be
able to invalidate cache as device is already removed from domain device
list.
This is causing change domain tests (changing domain type from identity to DMA)
to fail with IO_PAGE_FAULT issue.
Hence invalidate cache and update DTE before updating data structures.
Reported-by: FahHean Lee <fahhean.lee@amd.com>
Reported-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Fixes: 87a6f1f22c97 ("iommu/amd: Introduce per-device domain ID to fix potential TLB aliasing issue")
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Tested-by: Sairaj Arun Kodilkar <sairaj.arunkodilkar@amd.com>
Tested-by: FahHean Lee <fahhean.lee@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240620060552.13984-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Kuniyuki Iwashima says:
====================
af_unix: Fix bunch of MSG_OOB bugs and add new tests.
This series rewrites the selftest for AF_UNIX MSG_OOB and fixes
bunch of bugs that AF_UNIX behaves differently compared to TCP.
Note that the test discovered few more bugs in TCP side, which
will be fixed in another series.
====================
Link: https://lore.kernel.org/r/20240625013645.45034-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To catch regression, let's check ioctl(SIOCATMARK) after every
send() and recv() calls.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the
OOB skb is at the head of the receive queue and no new OOB data is queued.
Without fix:
# RUN msg_oob.no_peek.oob ...
# msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1)
# oob: Test terminated by assertion
# FAIL msg_oob.no_peek.oob
not ok 2 msg_oob.no_peek.oob
With fix:
# RUN msg_oob.no_peek.oob ...
# OK msg_oob.no_peek.oob
ok 2 msg_oob.no_peek.oob
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When OOB data is in recvq, we can detect it with epoll by checking
EPOLLPRI.
This patch add checks for EPOLLPRI after every send() and recv() in
all test cases.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When data is sent with MSG_OOB, SIGURG is sent to a process if the
receiver socket has set its owner to the process by ioctl(FIOSETOWN)
or fcntl(F_SETOWN).
This patch adds SIGURG check after every send(MSG_OOB) call.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed
without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently.
This patch adds some test cases for SO_OOBINLINE.
Note the new test cases found two bugs in TCP.
1) After reading OOB data with non-inline mode, we can re-read
the data by setting SO_OOBINLINE.
# RUN msg_oob.no_peek.inline_oob_ahead_break ...
# msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world
# msg_oob.c:147:inline_oob_ahead_break:TCP :oworld
# OK msg_oob.no_peek.inline_oob_ahead_break
ok 14 msg_oob.no_peek.inline_oob_ahead_break
2) The head OOB data is dropped if SO_OOBINLINE is disabled
if a new OOB data is queued.
# RUN msg_oob.no_peek.inline_ex_oob_drop ...
# msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x
# msg_oob.c:172:inline_ex_oob_drop:TCP :y
# msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y
# msg_oob.c:147:inline_ex_oob_drop:TCP :Resource temporarily unavailable
# OK msg_oob.no_peek.inline_ex_oob_drop
ok 17 msg_oob.no_peek.inline_ex_oob_drop
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, recv() is stopped at a consumed OOB skb even if a new
OOB skb is queued and we can ignore the old OOB skb.
>>> from socket import *
>>> c1, c2 = socket(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'hellowor', MSG_OOB)
8
>>> c2.recv(1, MSG_OOB) # consume OOB data stays at middle of recvq.
b'r'
>>> c1.send(b'ld', MSG_OOB)
2
>>> c2.recv(10) # recv() stops at the old consumed OOB
b'hellowo' # should be 'hellowol'
manage_oob() should not stop recv() at the old consumed OOB skb if
there is a new OOB data queued.
Note that TCP behaviour is apparently wrong in this test case because
we can recv() the same OOB data twice.
Without fix:
# RUN msg_oob.no_peek.ex_oob_ahead_break ...
# msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo
# msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol
# msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8)
# ex_oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ahead_break
not ok 11 msg_oob.no_peek.ex_oob_ahead_break
With fix:
# RUN msg_oob.no_peek.ex_oob_ahead_break ...
# msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol
# msg_oob.c:147:ex_oob_ahead_break:TCP :helloworl
# OK msg_oob.no_peek.ex_oob_ahead_break
ok 11 msg_oob.no_peek.ex_oob_ahead_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While testing, I found some weird behaviour on the TCP side as well.
For example, TCP drops the preceding OOB data when queueing a new
OOB data if the old OOB data is at the head of recvq.
# RUN msg_oob.no_peek.ex_oob_drop ...
# msg_oob.c:146:ex_oob_drop:AF_UNIX :x
# msg_oob.c:147:ex_oob_drop:TCP :Resource temporarily unavailable
# msg_oob.c:146:ex_oob_drop:AF_UNIX :y
# msg_oob.c:147:ex_oob_drop:TCP :Invalid argument
# OK msg_oob.no_peek.ex_oob_drop
ok 9 msg_oob.no_peek.ex_oob_drop
# RUN msg_oob.no_peek.ex_oob_drop_2 ...
# msg_oob.c:146:ex_oob_drop_2:AF_UNIX :x
# msg_oob.c:147:ex_oob_drop_2:TCP :Resource temporarily unavailable
# OK msg_oob.no_peek.ex_oob_drop_2
ok 10 msg_oob.no_peek.ex_oob_drop_2
This patch allows AF_UNIX's MSG_OOB implementation to produce different
results from TCP when operations are guarded with tcp_incompliant{}.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Let's say a socket send()s "hello" with MSG_OOB and "world" without flags,
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
and its peer recv()s "hell" and "o".
>>> c2.recv(10)
b'hell'
>>> c2.recv(1, MSG_OOB)
b'o'
Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.
Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.
>>> c2.setblocking(False) # This causes -EAGAIN even with available data
>>> c2.recv(5)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
BlockingIOError: [Errno 11] Resource temporarily unavailable
However, next recv() will return the following available data, "world".
>>> c2.recv(5)
b'world'
When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.
Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().
This patch also adds a test case that covers the issue.
Without fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
# msg_oob.c:135:ex_oob_break:Expected:ld
# msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
# ex_oob_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_break
not ok 8 msg_oob.no_peek.ex_oob_break
With fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# OK msg_oob.no_peek.ex_oob_break
ok 8 msg_oob.no_peek.ex_oob_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After consuming OOB data, recv() reading the preceding data must break at
the OOB skb regardless of MSG_PEEK.
Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is
not compliant with TCP.
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
>>> c2.recv(1, MSG_OOB)
b'o'
>>> c2.recv(9, MSG_PEEK) # This should return b'hell'
b'hellworld' # even with enough buffer.
Let's fix it by returning NULL for consumed skb and unlinking it only if
MSG_PEEK is not specified.
This patch also adds test cases that add recv(MSG_PEEK) before each recv().
Without fix:
# RUN msg_oob.peek.oob_ahead_break ...
# msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld
# msg_oob.c:135:oob_ahead_break:Expected:hell
# msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4)
# oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.peek.oob_ahead_break
not ok 13 msg_oob.peek.oob_ahead_break
With fix:
# RUN msg_oob.peek.oob_ahead_break ...
# OK msg_oob.peek.oob_ahead_break
ok 13 msg_oob.peek.oob_ahead_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
AF_UNIX's MSG_OOB functionality lacked thorough testing, and we found
some bizarre behaviour.
The new selftest validates every MSG_OOB operation against TCP as a
reference implementation.
This patch adds only a few tests with basic send() and recv() that
do not fail.
The following patches will add more test cases for SO_OOBINLINE, SIGURG,
EPOLLPRI, and SIOCATMARK.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
test_unix_oob.c does not fully cover AF_UNIX's MSG_OOB functionality,
thus there are discrepancies between TCP behaviour.
Also, the test uses fork() to create message producer, and it's not
easy to understand and add more test cases.
Let's remove test_unix_oob.c and rewrite a new test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Don't call drm_suballoc_free with sa_bo pointing to PTR_ERR.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2120
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620102025.127699-2-matthew.auld@intel.com
|
|
Timeouts on the AUX bus are to be expected in certain normal operating
conditions. There is no need to raise an error log or re-initialize the
whole AUX state machine. Simply acknowledge the AUX_ERR interrupt and
let upper layers know about the timeout.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-14-l.stach@pengutronix.de
|
|
All AUX error responses raise the AUX_ERR interrupt, so there is no
need to read the AUX status register in normal operation. Only read
the status when an error occurred and we can expect a different
status than OK.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-13-l.stach@pengutronix.de
|
|
Move the wait loop into its own function, so it doesn't need to be
replicated in multiple locations. Also move the PLL lock checks between
setting the link bandwidth, which may cause the PLL to unlock, and the
MACRO_RST which needs the PLL to be locked.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-12-l.stach@pengutronix.de
|
|
The PLL will be reconfigured later, which may cause it to go out of lock
anyway, so there is no point in waiting for the PLL to lock here. Instead
we can continue execution of the link setup, which will properly set the
PLL parameters and will wait for the PLL to lock at the appropriate times.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-11-l.stach@pengutronix.de
|
|
Setting the link bandwidth may change the PLL parameters, which will cause
the PLL to go out of lock, so make sure to apply the MACRO_RST, which
according to the comment is required to be pulsed after the PLL is locked.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-10-l.stach@pengutronix.de
|
|
This check is way too late in the DP enable flow. The PLL must be
locked much earlier, before any link training can happen. If the
PLL is unlocked at that point in time there is something seriously
wrong in the enable flow.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Robet Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-9-l.stach@pengutronix.de
|
|
Make sure the controller is in a basic working state after runtime
resume. Keep the analog function enable in the mode set path as this
enables parts of the PHY that are only required to be powered when
there is a data stream being sent out.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-8-l.stach@pengutronix.de
|
|
Platform and PHY power isn't only required when the actual display data
stream is active, but may be required earlier to support AUX channel
transactions. Move them into the runtime PM calls, so they are properly
managed whenever various other parts of the driver need them to be active.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-7-l.stach@pengutronix.de
|
|
The clock is already managed by runtime PM, which is properly invoked
from the analogix_dp_set_bridge function, so there is no need for an
additional reference.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-6-l.stach@pengutronix.de
|
|
Now that the clock is handled dynamically through
analogix_dp_resume/suspend and it isn't statically enabled in the
driver probe routine, there is no need for the remove function anymore.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-5-l.stach@pengutronix.de
|
|
There is no reason to enable the controller clock in driver probe, as
there is no HW initialization done in this function. Instead rely on
either runtime PM to handle the controller clock or statically enable
it in the driver bind routine, after which real hardware access is
required to work.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-4-l.stach@pengutronix.de
|
|
AUX transactions require the controller to be in working state and
take a runtime PM reference. To avoid potential races beween the
first transactions on the bus and runtime PM being set up, move the
AUX registration behind the runtime PM setup.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-3-l.stach@pengutronix.de
|
|
Hook up the runtime PM suspend/resume paths to make the rockchip
glue behave more like the exynos one. The same suspend/resume
functions are used for system sleep via the runtime PM force
suspend/resume.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-2-l.stach@pengutronix.de
|
|
This isn't used, but gives the impression of the power on and power off
platform calls being non-symmetrical. Remove the unused callback and
rename the power_on_start to simply power_on.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-1-l.stach@pengutronix.de
|
|
When CONFIG_DRM_PANIC=y, but CONFIG_DRM=m:
ld: drivers/gpu/drm/drm_panic.o: in function `drm_panic_setup_logo':
drivers/gpu/drm/drm_panic.c:99: multiple definition of `init_module'; drivers/gpu/drm/drm_drv.o:drivers/gpu/drm/drm_drv.c:1079: first defined here
Fix this by restricting the graphical logo handling and its
device_initcall() to the built-in case. Logos are freed during late
kernel initialization, so they are no longer available at module load
time anyway.
Fixes: 294bbd1f2697 ("drm/panic: Add support for drawing a monochrome graphical logo")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406261341.GYsbLpN1-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4009fca99a7c05f617cc9899c6d0a5748415595d.1719391132.git.geert+renesas@glider.be
|
|
DRM core code cannot call into DRM helper code, as this would lead to
circular references in the modular case. Hence drop the selection of
DRM_KMS_HELPER. It was unused anyway, as v10 switched from using
the DRM format helpers to its own color format conversion, cfr. commit
9544309775c3 ("drm/panic: Add support for color format conversion").
Remove the unneeded include of <drm/drm_format_helper.h>.
Fixes: bf9fb17c6672 ("drm/panic: Add a drm panic handler")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/60155f8c939ed286e324a7c12a1daa69fe49fcf6.1719391132.git.geert+renesas@glider.be
|
|
This reverts commit 01338bb82fed40a6a234c2b36a92367c8671adf0.
With clock improvements in place, this seems to be no longer
necessary. Set the CLRSIPO to default setting recommended by
manufacturer.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-5-marex@denx.de
|
|
The only information in the datasheet regarding this divider is a note
in SYS_PLLPARAM register documentation which states that when LSCLK is
270 MHz, LSCLK_DIV should be 1. What should LSCLK_DIV be set to when
LSCLK is 162 MHz (for DP 1.62G mode) is unclear, but empirical test
confirms using LSCLK_DIV 1 has no adverse effects either. In the worst
case, the internal TC358767 clock would run faster.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-4-marex@denx.de
|
|
This line_pixel_subtract is no longer needed now that the bridge can
request and obtain specific pixel clock on input to the bridge, with
clock frequency that matches the Pixel PLL frequency.
The line_pixel_subtract is now always 0, so drop it entirely.
The line_pixel_subtract was not reliable as it never worked when the
Pixel PLL and input clock were off just so that the required amount
of pixels to subtract would not be whole integer.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-3-marex@denx.de
|
|
Use tc_pxl_pll_calc() to find out the exact clock frequency generated by the
Pixel PLL. Use the Pixel PLL frequency as adjusted_mode clock frequency and
pass it down the display pipeline to obtain exactly this frequency on input
into this bridge.
The precise input frequency that matches the Pixel PLL frequency is
important for this bridge, as if the frequencies do not match, the
bridge does suffer VFIFO overruns or underruns.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-2-marex@denx.de
|
|
enablement
Split tc_pxl_pll_en() into tc_pxl_pll_calc() which does only Pixel PLL
parameter calculation and tc_pxl_pll_en() which calls tc_pxl_pll_calc()
and then configures the Pixel PLL register.
This is a preparatory patch for further rework, where tc_pxl_pll_calc()
will also be used to find out the exact clock frequency generated by the
Pixel PLL. This frequency will be used as adjusted_mode clock frequency
and passed down the display pipeline to obtain exactly this frequency
on input into this bridge.
The precise input frequency that matches the Pixel PLL frequency is
important for this bridge, as if the frequencies do not match, the
bridge does suffer VFIFO overruns or underruns.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-1-marex@denx.de
|
|
In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from
qdisc->dev_queue->dev <NULL> ->name
This situation simulated from bunch of veths and Bluetooth disconnection
and reconnection.
During qdisc initialization, qdisc was being set to noop_queue.
In veth_init_queue, the initial tx_num was reduced back to one,
causing the qdisc reset to be called with noop, which led to the kernel
panic.
I've attached the GitHub gist link that C converted syz-execprogram
source code and 3 log of reproduced vmcore-dmesg.
https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740
Yeoreum and I use two fuzzing tool simultaneously.
One process with syz-executor : https://github.com/google/syzkaller
$ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \
-enable=none -collide=false log1
The other process with perf fuzzer:
https://github.com/deater/perf_event_tests/tree/master/fuzzer
$ perf_event_tests/fuzzer/perf_fuzzer
I think this will happen on the kernel version.
Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10.
This occurred from 51270d573a8d. I think this patch is absolutely
necessary. Previously, It was showing not intended string value of name.
I've reproduced 3 time from my fedora 40 Debug Kernel with any other module
or patched.
version: 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug
[ 5287.164555] veth0_vlan: left promiscuous mode
[ 5287.164929] veth1_macvtap: left promiscuous mode
[ 5287.164950] veth0_macvtap: left promiscuous mode
[ 5287.164983] veth1_vlan: left promiscuous mode
[ 5287.165008] veth0_vlan: left promiscuous mode
[ 5287.165450] veth1_macvtap: left promiscuous mode
[ 5287.165472] veth0_macvtap: left promiscuous mode
[ 5287.165502] veth1_vlan: left promiscuous mode
…
[ 5297.598240] bridge0: port 2(bridge_slave_1) entered blocking state
[ 5297.598262] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 5297.598296] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5297.598313] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 5297.616090] 8021q: adding VLAN 0 to HW filter on device bond0
[ 5297.620405] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5297.620730] bridge0: port 2(bridge_slave_1) entered disabled state
[ 5297.627247] 8021q: adding VLAN 0 to HW filter on device team0
[ 5297.629636] bridge0: port 1(bridge_slave_0) entered blocking state
…
[ 5298.002798] bridge_slave_0: left promiscuous mode
[ 5298.002869] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5298.309444] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[ 5298.315206] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[ 5298.320207] bond0 (unregistering): Released all slaves
[ 5298.354296] hsr_slave_0: left promiscuous mode
[ 5298.360750] hsr_slave_1: left promiscuous mode
[ 5298.374889] veth1_macvtap: left promiscuous mode
[ 5298.374931] veth0_macvtap: left promiscuous mode
[ 5298.374988] veth1_vlan: left promiscuous mode
[ 5298.375024] veth0_vlan: left promiscuous mode
[ 5299.109741] team0 (unregistering): Port device team_slave_1 removed
[ 5299.185870] team0 (unregistering): Port device team_slave_0 removed
…
[ 5300.155443] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1
[ 5300.155724] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9
[ 5300.155988] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9
….
[ 5301.075531] team0: Port device team_slave_1 added
[ 5301.085515] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5301.085531] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5301.085588] bridge_slave_0: entered allmulticast mode
[ 5301.085800] bridge_slave_0: entered promiscuous mode
[ 5301.095617] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5301.095633] bridge0: port 1(bridge_slave_0) entered disabled state
…
[ 5301.149734] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.173234] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.180517] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 5301.193481] hsr_slave_0: entered promiscuous mode
[ 5301.204425] hsr_slave_1: entered promiscuous mode
[ 5301.210172] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.210185] Cannot create hsr debugfs directory
[ 5301.224061] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 5301.246901] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.255934] team0: Port device team_slave_0 added
[ 5301.256480] team0: Port device team_slave_1 added
[ 5301.256948] team0: Port device team_slave_0 added
…
[ 5301.435928] hsr_slave_0: entered promiscuous mode
[ 5301.446029] hsr_slave_1: entered promiscuous mode
[ 5301.455872] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.455884] Cannot create hsr debugfs directory
[ 5301.502664] hsr_slave_0: entered promiscuous mode
[ 5301.513675] hsr_slave_1: entered promiscuous mode
[ 5301.526155] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.526164] Cannot create hsr debugfs directory
[ 5301.563662] hsr_slave_0: entered promiscuous mode
[ 5301.576129] hsr_slave_1: entered promiscuous mode
[ 5301.580259] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.580270] Cannot create hsr debugfs directory
[ 5301.590269] 8021q: adding VLAN 0 to HW filter on device bond0
[ 5301.595872] KASAN: null-ptr-deref in range [0x0000000000000130-0x0000000000000137]
[ 5301.595877] Mem abort info:
[ 5301.595881] ESR = 0x0000000096000006
[ 5301.595885] EC = 0x25: DABT (current EL), IL = 32 bits
[ 5301.595889] SET = 0, FnV = 0
[ 5301.595893] EA = 0, S1PTW = 0
[ 5301.595896] FSC = 0x06: level 2 translation fault
[ 5301.595900] Data abort info:
[ 5301.595903] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 5301.595907] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 5301.595911] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 5301.595915] [dfff800000000026] address between user and kernel address ranges
[ 5301.595971] Internal error: Oops: 0000000096000006 [#1] SMP
…
[ 5301.596076] CPU: 2 PID: 102769 Comm:
syz-executor.3 Kdump: loaded Tainted:
G W ------- --- 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug #1
[ 5301.596080] Hardware name: VMware, Inc. VMware20,1/VBSA,
BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023
[ 5301.596082] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 5301.596085] pc : strnlen+0x40/0x88
[ 5301.596114] lr : trace_event_get_offsets_qdisc_reset+0x6c/0x2b0
[ 5301.596124] sp : ffff8000beef6b40
[ 5301.596126] x29: ffff8000beef6b40 x28: dfff800000000000 x27: 0000000000000001
[ 5301.596131] x26: 6de1800082c62bd0 x25: 1ffff000110aa9e0 x24: ffff800088554f00
[ 5301.596136] x23: ffff800088554ec0 x22: 0000000000000130 x21: 0000000000000140
[ 5301.596140] x20: dfff800000000000 x19: ffff8000beef6c60 x18: ffff7000115106d8
[ 5301.596143] x17: ffff800121bad000 x16: ffff800080020000 x15: 0000000000000006
[ 5301.596147] x14: 0000000000000002 x13: ffff0001f3ed8d14 x12: ffff700017ddeda5
[ 5301.596151] x11: 1ffff00017ddeda4 x10: ffff700017ddeda4 x9 : ffff800082cc5eec
[ 5301.596155] x8 : 0000000000000004 x7 : 00000000f1f1f1f1 x6 : 00000000f2f2f200
[ 5301.596158] x5 : 00000000f3f3f3f3 x4 : ffff700017dded80 x3 : 00000000f204f1f1
[ 5301.596162] x2 : 0000000000000026 x1 : 0000000000000000 x0 : 0000000000000130
[ 5301.596166] Call trace:
[ 5301.596175] strnlen+0x40/0x88
[ 5301.596179] trace_event_get_offsets_qdisc_reset+0x6c/0x2b0
[ 5301.596182] perf_trace_qdisc_reset+0xb0/0x538
[ 5301.596184] __traceiter_qdisc_reset+0x68/0xc0
[ 5301.596188] qdisc_reset+0x43c/0x5e8
[ 5301.596190] netif_set_real_num_tx_queues+0x288/0x770
[ 5301.596194] veth_init_queues+0xfc/0x130 [veth]
[ 5301.596198] veth_newlink+0x45c/0x850 [veth]
[ 5301.596202] rtnl_newlink_create+0x2c8/0x798
[ 5301.596205] __rtnl_newlink+0x92c/0xb60
[ 5301.596208] rtnl_newlink+0xd8/0x130
[ 5301.596211] rtnetlink_rcv_msg+0x2e0/0x890
[ 5301.596214] netlink_rcv_skb+0x1c4/0x380
[ 5301.596225] rtnetlink_rcv+0x20/0x38
[ 5301.596227] netlink_unicast+0x3c8/0x640
[ 5301.596231] netlink_sendmsg+0x658/0xa60
[ 5301.596234] __sock_sendmsg+0xd0/0x180
[ 5301.596243] __sys_sendto+0x1c0/0x280
[ 5301.596246] __arm64_sys_sendto+0xc8/0x150
[ 5301.596249] invoke_syscall+0xdc/0x268
[ 5301.596256] el0_svc_common.constprop.0+0x16c/0x240
[ 5301.596259] do_el0_svc+0x48/0x68
[ 5301.596261] el0_svc+0x50/0x188
[ 5301.596265] el0t_64_sync_handler+0x120/0x130
[ 5301.596268] el0t_64_sync+0x194/0x198
[ 5301.596272] Code: eb15001f 54000120 d343fc02 12000801 (38f46842)
[ 5301.596285] SMP: stopping secondary CPUs
[ 5301.597053] Starting crashdump kernel...
[ 5301.597057] Bye!
After applying our patch, I didn't find any kernel panic errors.
We've found a simple reproducer
# echo 1 > /sys/kernel/debug/tracing/events/qdisc/qdisc_reset/enable
# ip link add veth0 type veth peer name veth1
Error: Unknown device type.
However, without our patch applied, I tested upstream 6.10.0-rc3 kernel
using the qdisc_reset event and the ip command on my qemu virtual machine.
This 2 commands makes always kernel panic.
Linux version: 6.10.0-rc3
[ 0.000000] Linux version 6.10.0-rc3-00164-g44ef20baed8e-dirty
(paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld
version 2.41-34.fc40) #20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024
Kernel panic message:
[ 615.236484] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 615.237250] Dumping ftrace buffer:
[ 615.237679] (ftrace buffer empty)
[ 615.238097] Modules linked in: veth crct10dif_ce virtio_gpu
virtio_dma_buf drm_shmem_helper drm_kms_helper zynqmp_fpga xilinx_can
xilinx_spi xilinx_selectmap xilinx_core xilinx_pr_decoupler versal_fpga
uvcvideo uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev
videobuf2_common mc usbnet deflate zstd ubifs ubi rcar_canfd rcar_can
omap_mailbox ntb_msi_test ntb_hw_epf lattice_sysconfig_spi
lattice_sysconfig ice40_spi gpio_xilinx dwmac_altr_socfpga mdio_regmap
stmmac_platform stmmac pcs_xpcs dfl_fme_region dfl_fme_mgr dfl_fme_br
dfl_afu dfl fpga_region fpga_bridge can can_dev br_netfilter bridge stp
llc atl1c ath11k_pci mhi ath11k_ahb ath11k qmi_helpers ath10k_sdio
ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 drm fuse backlight ipv6
Jun 22 02:36:5[3 6k152.62-4sm98k4-0k]v kCePUr:n e1l :P IUDn:a b4le6
8t oC ohmma: nidpl eN oketr nteali nptaedg i6n.g1 0re.0q-urecs3t- 0at0
1v6i4r-tgu4a4le fa2d0dbraeeds0se-dir tyd f#f2f08
615.252376] Hardware name: linux,dummy-virt (DT)
[ 615.253220] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 615.254433] pc : strnlen+0x6c/0xe0
[ 615.255096] lr : trace_event_get_offsets_qdisc_reset+0x94/0x3d0
[ 615.256088] sp : ffff800080b269a0
[ 615.256615] x29: ffff800080b269a0 x28: ffffc070f3f98500 x27:
0000000000000001
[ 615.257831] x26: 0000000000000010 x25: ffffc070f3f98540 x24:
ffffc070f619cf60
[ 615.259020] x23: 0000000000000128 x22: 0000000000000138 x21:
dfff800000000000
[ 615.260241] x20: ffffc070f631ad00 x19: 0000000000000128 x18:
ffffc070f448b800
[ 615.261454] x17: 0000000000000000 x16: 0000000000000001 x15:
ffffc070f4ba2a90
[ 615.262635] x14: ffff700010164d73 x13: 1ffff80e1e8d5eb3 x12:
1ffff00010164d72
[ 615.263877] x11: ffff700010164d72 x10: dfff800000000000 x9 :
ffffc070e85d6184
[ 615.265047] x8 : ffffc070e4402070 x7 : 000000000000f1f1 x6 :
000000001504a6d3
[ 615.266336] x5 : ffff28ca21122140 x4 : ffffc070f5043ea8 x3 :
0000000000000000
[ 615.267528] x2 : 0000000000000025 x1 : 0000000000000000 x0 :
0000000000000000
[ 615.268747] Call trace:
[ 615.269180] strnlen+0x6c/0xe0
[ 615.269767] trace_event_get_offsets_qdisc_reset+0x94/0x3d0
[ 615.270716] trace_event_raw_event_qdisc_reset+0xe8/0x4e8
[ 615.271667] __traceiter_qdisc_reset+0xa0/0x140
[ 615.272499] qdisc_reset+0x554/0x848
[ 615.273134] netif_set_real_num_tx_queues+0x360/0x9a8
[ 615.274050] veth_init_queues+0x110/0x220 [veth]
[ 615.275110] veth_newlink+0x538/0xa50 [veth]
[ 615.276172] __rtnl_newlink+0x11e4/0x1bc8
[ 615.276944] rtnl_newlink+0xac/0x120
[ 615.277657] rtnetlink_rcv_msg+0x4e4/0x1370
[ 615.278409] netlink_rcv_skb+0x25c/0x4f0
[ 615.279122] rtnetlink_rcv+0x48/0x70
[ 615.279769] netlink_unicast+0x5a8/0x7b8
[ 615.280462] netlink_sendmsg+0xa70/0x1190
Yeoreum and I don't know if the patch we wrote will fix the underlying
cause, but we think that priority is to prevent kernel panic happening.
So, we're sending this patch.
Fixes: 51270d573a8d ("tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string")
Link: https://lore.kernel.org/lkml/20240229143432.273b4871@gandalf.local.home/t/
Cc: netdev@vger.kernel.org
Tested-by: Yunseong Kim <yskelg@gmail.com>
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20240624173320.24945-4-yskelg@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The function drm_simple_encoder_init() is a trivial helper and
deprecated. Replace it with the regular call to drm_encoder_init().
Resolves the dependency on drm_simple_kms_helper.h. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625131815.14514-1-tzimmermann@suse.de
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-06-26:
amdgpu:
- SMU 14.x fix
- vram info parsing fix
- mode1 reset fix
- LTTPR fix
- Virtual display fix
- Avoid spurious error in PSP init
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626221408.2019633-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.10-rc6:
- nouveau tv mode fixes.
- Add KOE TX26D202VM0BWA timings.
- Fix fb_info when vmalloc is used, regression from
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e596c1e-9389-43c2-a029-06fe741c44c3@linux.intel.com
|
