| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is four patches, consisting of one regression from the merge
window (qla2xxx), one long-standing memory leak (sd_zbc), one event
queue mislabelling which we want to eliminate to discourage the
pattern (mpt3sas), and one behaviour change because re-reading the
partition table shouldn't clear the ro flag"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Keep disk read-only when re-reading partition
scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure
scsi: sd_zbc: Fix potential memory leak
scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM
|
|
geo->keylen cannot be larger than 4. So we might as well make
fixed-size allocations.
Given the one remaining user, geo->keylen cannot even be larger than 1.
Logfs used to have 64bit and 128bit keys, tcm_qla2xxx only has 32bit
keys. But let's not break the code if we don't have to.
Signed-off-by: Joern Engel <joern@purestorage.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc
Pull percpu_ref rcu fixes from Tejun Heo:
"Jann Horn found that aio was depending on the internal RCU grace
periods of percpu-ref and that it's broken because aio uses regular
RCU while percpu_ref uses sched-RCU.
Depending on percpu_ref's internal grace periods isn't a good idea
because
- The RCU type might not match.
- percpu_ref's grace periods are used to switch to atomic mode. They
aren't between the last put and the invocation of the last release.
This is easy to get confused about and can lead to subtle bugs.
- percpu_ref might not have grace periods at all depending on its
current operation mode.
This patchset audits and fixes percpu_ref users for their RCU usages"
[ There's a continuation of this series that clarifies percpu_ref
documentation that the internal grace periods must not be depended
upon, and introduces rcu_work to simplify bouncing to a workqueue
after an RCU grace period.
That will go in for 4.17 - this is just the minimal set with the fixes
that are tagged for -stable ]
* 'percpu_ref-rcu-audit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc:
RDMAVT: Fix synchronization around percpu_ref
fs/aio: Use RCU accessors for kioctx_table->table[]
fs/aio: Add explicit RCU grace period when freeing kioctx
|
|
This reverts commit 864b75f9d6b0100bb24fdd9a20d156e7cda9b5ae.
Commit 864b75f9d6b0 ("mm/page_alloc: fix memmap_init_zone pageblock
alignment") modified the logic in memmap_init_zone() to initialize
struct pages associated with invalid PFNs, to appease a VM_BUG_ON()
in move_freepages(), which is redundant by its own admission, and
dereferences struct page fields to obtain the zone without checking
whether the struct pages in question are valid to begin with.
Commit 864b75f9d6b0 only makes it worse, since the rounding it does
may cause pfn assume the same value it had in a prior iteration of
the loop, resulting in an infinite loop and a hang very early in the
boot. Also, since it doesn't perform the same rounding on start_pfn
itself but only on intermediate values following an invalid PFN, we
may still hit the same VM_BUG_ON() as before.
So instead, let's fix this at the core, and ensure that the BUG
check doesn't dereference struct page fields of invalid pages.
Fixes: 864b75f9d6b0 ("mm/page_alloc: fix memmap_init_zone pageblock alignment")
Tested-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Cc: Daniel Vacek <neelx@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- 1 display fix for bxt
- 1 gem fix for fences
- 1 gem/pm fix for rps freq
* tag 'drm-intel-fixes-2018-03-14' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Kick the rps worker when changing the boost frequency
drm/i915: Only prune fences after wait-for-all
drm/i915: Enable VBT based BL control for DP
|
|
into drm-fixes
A few fixes for 4.16:
- Fix a backlight S/R regression on amdgpu
- Fix prime teardown on radeon and amdgpu
- DP fix for amdgpu
* 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu/dce: Don't turn off DP sink when disconnected
drm/amdgpu: save/restore backlight level in legacy dce code
drm/radeon: fix prime teardown order
drm/amdgpu: fix prime teardown order
|
|
On 32-bit targets, we otherwise get a warning about an impossible constant
integer expression:
In file included from include/linux/kernel.h:11,
from include/linux/interrupt.h:6,
from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device':
include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow]
#define BIT(nr) (1UL << (nr))
^~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT'
#define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39)
^~~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH'
#define BNXT_RE_MAX_MR_SIZE BNXT_RE_MAX_MR_SIZE_HIGH
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE'
ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE;
^~~~~~~~~~~~~~~~~~~
Fixes: 872f3578241d ("RDMA/bnxt_re: Add support for MRs with Huge pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Building for a 32-bit target results in a couple of warnings from casting
between a 32-bit pointer and a 64-bit integer:
drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_service_nq':
drivers/infiniband/hw/bnxt_re/qplib_fp.c:333:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
bnxt_qplib_arm_srq((struct bnxt_qplib_srq *)q_handle,
^
drivers/infiniband/hw/bnxt_re/qplib_fp.c:336:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
(struct bnxt_qplib_srq *)q_handle,
^
In file included from include/linux/byteorder/little_endian.h:5,
from arch/arm/include/uapi/asm/byteorder.h:22,
from include/asm-generic/bitops/le.h:6,
from arch/arm/include/asm/bitops.h:342,
from include/linux/bitops.h:38,
from include/linux/kernel.h:11,
from include/linux/interrupt.h:6,
from drivers/infiniband/hw/bnxt_re/qplib_fp.c:39:
drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_create_srq':
include/uapi/linux/byteorder/little_endian.h:31:43: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
^
include/linux/byteorder/generic.h:86:21: note: in expansion of macro '__cpu_to_le64'
#define cpu_to_le64 __cpu_to_le64
^~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/qplib_fp.c:569:19: note: in expansion of macro 'cpu_to_le64'
req.srq_handle = cpu_to_le64(srq);
Using a uintptr_t as an intermediate works on all architectures.
Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Commit 24b6d4164348 "mm: pass the vmem_altmap to vmemmap_free" converted
the vmemmap_free() path to pass the altmap argument all the way through
the call chain rather than looking it up based on the page.
Unfortunately that ends up over freeing altmap allocated pages in some
cases since free_pagetable() is used to free both memmap space and pte
space, where only the memmap stored in huge pages uses altmap
allocations.
Given that altmap allocations for memmap space are special cased in
vmemmap_populate_hugepages() add a symmetric / special case
free_hugepage_table() to handle altmap freeing, and cleanup the unneeded
passing of altmap to leaf functions that do not require it.
Without this change the sanity check accounting in
devm_memremap_pages_release() will throw a warning with the following
signature.
nd_pmem pfn10.1: devm_memremap_pages_release: failed to free all reserved pages
WARNING: CPU: 44 PID: 3539 at kernel/memremap.c:310 devm_memremap_pages_release+0x1c7/0x220
CPU: 44 PID: 3539 Comm: ndctl Tainted: G L 4.16.0-rc1-linux-stable #7
RIP: 0010:devm_memremap_pages_release+0x1c7/0x220
[..]
Call Trace:
release_nodes+0x225/0x270
device_release_driver_internal+0x15d/0x210
bus_remove_device+0xe2/0x160
device_del+0x130/0x310
? klist_release+0x56/0x100
? nd_region_notify+0xc0/0xc0 [libnvdimm]
device_unregister+0x16/0x60
This was missed in testing since not all configurations will trigger
this warning.
Fixes: 24b6d4164348 ("mm: pass the vmem_altmap to vmemmap_free")
Reported-by: Jane Chu <jane.chu@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This patch addresses an issue that causes fiemap to falsely
report a shared extent. The test case is as follows:
xfs_io -f -d -c "pwrite -b 16k 0 64k" -c "fiemap -v" /media/scratch/file5
sync
xfs_io -c "fiemap -v" /media/scratch/file5
which gives the resulting output:
wrote 65536/65536 bytes at offset 0
64 KiB, 4 ops; 0.0000 sec (121.359 MiB/sec and 7766.9903 ops/sec)
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x2001
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x1
This is because btrfs_check_shared calls find_parent_nodes
repeatedly in a loop, passing a share_check struct to report
the count of shared extent. But btrfs_check_shared does not
re-initialize the count value to zero for subsequent calls
from the loop, resulting in a false share count value. This
is a regressive behavior from 4.13.
With proper re-initialization the test result is as follows:
wrote 65536/65536 bytes at offset 0
64 KiB, 4 ops; 0.0000 sec (110.035 MiB/sec and 7042.2535 ops/sec)
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x1
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x1
which corrects the regression.
Fixes: 3ec4d3238ab ("btrfs: allow backref search checks for shared extents")
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
[ add text from cover letter to changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On detaching of a disk which is a part of a RAID6 filesystem, the
following kernel OOPS may happen:
[63122.680461] BTRFS error (device sdo): bdev /dev/sdo errs: wr 0, rd 0, flush 1, corrupt 0, gen 0
[63122.719584] BTRFS warning (device sdo): lost page write due to IO error on /dev/sdo
[63122.719587] BTRFS error (device sdo): bdev /dev/sdo errs: wr 1, rd 0, flush 1, corrupt 0, gen 0
[63122.803516] BTRFS warning (device sdo): lost page write due to IO error on /dev/sdo
[63122.803519] BTRFS error (device sdo): bdev /dev/sdo errs: wr 2, rd 0, flush 1, corrupt 0, gen 0
[63122.863902] BTRFS critical (device sdo): fatal error on device /dev/sdo
[63122.935338] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[63122.946554] IP: fail_bio_stripe+0x58/0xa0 [btrfs]
[63122.958185] PGD 9ecda067 P4D 9ecda067 PUD b2b37067 PMD 0
[63122.971202] Oops: 0000 [#1] SMP
[63123.006760] CPU: 0 PID: 3979 Comm: kworker/u8:9 Tainted: G W 4.14.2-16-scst34x+ #8
[63123.007091] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[63123.007402] Workqueue: btrfs-worker btrfs_worker_helper [btrfs]
[63123.007595] task: ffff880036ea4040 task.stack: ffffc90006384000
[63123.007796] RIP: 0010:fail_bio_stripe+0x58/0xa0 [btrfs]
[63123.007968] RSP: 0018:ffffc90006387ad8 EFLAGS: 00010287
[63123.008140] RAX: 0000000000000002 RBX: ffff88004beaa0b8 RCX: ffff8800b2bd5690
[63123.008359] RDX: 0000000000000000 RSI: ffff88007bb43500 RDI: ffff88004beaa000
[63123.008621] RBP: ffffc90006387ae8 R08: 0000000099100000 R09: ffff8800b2bd5600
[63123.008840] R10: 0000000000000004 R11: 0000000000010000 R12: ffff88007bb43500
[63123.009059] R13: 00000000fffffffb R14: ffff880036fc5180 R15: 0000000000000004
[63123.009278] FS: 0000000000000000(0000) GS:ffff8800b7000000(0000) knlGS:0000000000000000
[63123.009564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63123.009748] CR2: 0000000000000080 CR3: 00000000b0866000 CR4: 00000000000406f0
[63123.009969] Call Trace:
[63123.010085] raid_write_end_io+0x7e/0x80 [btrfs]
[63123.010251] bio_endio+0xa1/0x120
[63123.010378] generic_make_request+0x218/0x270
[63123.010921] submit_bio+0x66/0x130
[63123.011073] finish_rmw+0x3fc/0x5b0 [btrfs]
[63123.011245] full_stripe_write+0x96/0xc0 [btrfs]
[63123.011428] raid56_parity_write+0x117/0x170 [btrfs]
[63123.011604] btrfs_map_bio+0x2ec/0x320 [btrfs]
[63123.011759] ? ___cache_free+0x1c5/0x300
[63123.011909] __btrfs_submit_bio_done+0x26/0x50 [btrfs]
[63123.012087] run_one_async_done+0x9c/0xc0 [btrfs]
[63123.012257] normal_work_helper+0x19e/0x300 [btrfs]
[63123.012429] btrfs_worker_helper+0x12/0x20 [btrfs]
[63123.012656] process_one_work+0x14d/0x350
[63123.012888] worker_thread+0x4d/0x3a0
[63123.013026] ? _raw_spin_unlock_irqrestore+0x15/0x20
[63123.013192] kthread+0x109/0x140
[63123.013315] ? process_scheduled_works+0x40/0x40
[63123.013472] ? kthread_stop+0x110/0x110
[63123.013610] ret_from_fork+0x25/0x30
[63123.014469] RIP: fail_bio_stripe+0x58/0xa0 [btrfs] RSP: ffffc90006387ad8
[63123.014678] CR2: 0000000000000080
[63123.016590] ---[ end trace a295ea7259c17880 ]—
This is reproducible in a cycle, where a series of writes is followed by
SCSI device delete command. The test may take up to few minutes.
Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index")
[ no signed-off-by provided ]
Author: Dmitriy Gorokh <Dmitriy.Gorokh@wdc.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove mmhub header files inclusion which not used.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rather then relying on the asic type for the second instance.
Makes it more consistent with the rest of the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
|
|
no intended functional change.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Free the backend structure if we fail to allocate device
memory.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Turning off the sink in this case causes various issues, because
userspace expects it to stay on until it turns it off explicitly.
Instead, turn the sink off and back on when a display is connected
again. This dance seems necessary for link training to work correctly.
Bugzilla: https://bugs.freedesktop.org/105308
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The pointer internal_buf is assigned a value but the pointer is never
read, hence it is redundant and can be removed.
Cleans up clang warning:
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/smu7_smumgr.c:630:2:
warning: Value stored to 'internal_buf' is never read
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to replicate it in several places.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Regardless of whether the user has selected psp fw loading or
not. It's still needed for GPU reset among other things.
There are already guards in place to avoid setting up the full
psp if PSP fw loading is not enabled.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The per device firmware load method is limited to what makes sense for
that asic rather than whatever arbitrary value may have been set by the
user.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to replicate it in several places.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We already checked and returned early in most of the IP
functions, fill in the rest as well.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds an essential check related to the size of the
payload to be transferred via aux channel.
Without this check dal_ddc_service_read_dpcd_data() is fed with
inappropriate payload size leading to deadlocks.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We have unused variables being populated when notifying pplib.
This change amends that.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
root cause:
DMCU try to perform a smoothness brightness change.Incorrect initial
brightness level causes the 1 sec dim.
Change:
Cache brightness level in stream, and clear it when edp backlight on.
If brightness level in stream is 0, set brightness with ramp value is 0.
DMCU will set the brightness without smoothness transition.
v2: squash in null pointer fix (Harry)
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On load we create private CQ/QP/PD in order to be used by UMR, we create
those resources after we register ourself as an IB device, and we destroy
them after we unregister as an IB device. This was changed by commit
16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove
stages") which moved the destruction before we unregistration. This
allowed to trigger an invalid memory access when unloading mlx5_ib while
there are open resources:
BUG: unable to handle kernel paging request at 00000001002c012c
...
Call Trace:
mlx5_ib_post_send_wait+0x75/0x110 [mlx5_ib]
__slab_free+0x9a/0x2d0
delay_time_func+0x10/0x10 [mlx5_ib]
unreg_umr.isra.15+0x4b/0x50 [mlx5_ib]
mlx5_mr_cache_free+0x46/0x150 [mlx5_ib]
clean_mr+0xc9/0x190 [mlx5_ib]
dereg_mr+0xba/0xf0 [mlx5_ib]
ib_dereg_mr+0x13/0x20 [ib_core]
remove_commit_idr_uobject+0x16/0x70 [ib_uverbs]
uverbs_cleanup_ucontext+0xe8/0x1a0 [ib_uverbs]
ib_uverbs_cleanup_ucontext.isra.9+0x19/0x40 [ib_uverbs]
ib_uverbs_remove_one+0x162/0x2e0 [ib_uverbs]
ib_unregister_device+0xd4/0x190 [ib_core]
__mlx5_ib_remove+0x2e/0x40 [mlx5_ib]
mlx5_remove_device+0xf5/0x120 [mlx5_core]
mlx5_unregister_interface+0x37/0x90 [mlx5_core]
mlx5_ib_cleanup+0xc/0x225 [mlx5_ib]
SyS_delete_module+0x153/0x230
do_syscall_64+0x62/0x110
entry_SYSCALL_64_after_hwframe+0x21/0x86
...
We restore the original behavior by breaking the UMR stage into two parts,
pre and post IB registration stages, this way we can restore the original
functionality and maintain clean separation of logic between stages.
Fixes: 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Turning off the sink in this case causes various issues, because
userspace expects it to stay on until it turns it off explicitly.
Instead, turn the sink off and back on when a display is connected
again. This dance seems necessary for link training to work correctly.
Bugzilla: https://bugs.freedesktop.org/105308
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Save/restore the backlight level scratch register in S3/S4 so the
backlight level comes back at the previously requested level.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199047
Fixes: 4ec6ecf48c64d (drm/amdgpu: drop scratch regs save and restore from S3/S4 handling)
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the
hardware was done with the buffere.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the
hardware was done with the buffere.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Users can provide garbage while calling to ucma_join_ip_multicast(),
it will indirectly cause to rdma_addr_size() return 0, making the
call to ucma_process_join(), which had the right checks, but it is
better to check the input as early as possible.
The following crash from syzkaller revealed it.
kernel BUG at lib/string.c:1052!
invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 4113 Comm: syz-executor0 Not tainted 4.16.0-rc5+ #261
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051
RSP: 0018:ffff8801ca81f8f0 EFLAGS: 00010286
RAX: 0000000000000022 RBX: 1ffff10039503f23 RCX: 0000000000000000
RDX: 0000000000000022 RSI: 1ffff10039503ed3 RDI: ffffed0039503f12
RBP: ffff8801ca81f8f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000006 R11: 0000000000000000 R12: ffff8801ca81f998
R13: ffff8801ca81f938 R14: ffff8801ca81fa58 R15: 000000000000fa00
FS: 0000000000000000(0000) GS:ffff8801db200000(0063) knlGS:000000000a12a900
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000008138024 CR3: 00000001cbb58004 CR4: 00000000001606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
memcpy include/linux/string.h:344 [inline]
ucma_join_ip_multicast+0x36b/0x3b0 drivers/infiniband/core/ucma.c:1421
ucma_write+0x2d6/0x3d0 drivers/infiniband/core/ucma.c:1633
__vfs_write+0xef/0x970 fs/read_write.c:480
vfs_write+0x189/0x510 fs/read_write.c:544
SYSC_write fs/read_write.c:589 [inline]
SyS_write+0xef/0x220 fs/read_write.c:581
do_syscall_32_irqs_on arch/x86/entry/common.c:330 [inline]
do_fast_syscall_32+0x3ec/0xf9f arch/x86/entry/common.c:392
entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f9ec99
RSP: 002b:00000000ff8172cc EFLAGS: 00000282 ORIG_RAX: 0000000000000004
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020000100
RDX: 0000000000000063 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 42 2c e3 fb eb de
55 48 89 fe 48 c7 c7 80 75 98 86 48 89 e5 e8 85 95 94 fb <0f> 0b 90 90 90 90
90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56
RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801ca81f8f0
Fixes: 5bc2b7b397b0 ("RDMA/ucma: Allow user space to specify AF_IB when joining multicast")
Reported-by: <syzbot+2287ac532caa81900a4e@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The attempt to join multicast group without ensuring that CMA device
exists will lead to the following crash reported by syzkaller.
[ 64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0
[ 64.076797] Read of size 8 at addr 00000000000000b0 by task join/691
[ 64.076797]
[ 64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23
[ 64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4
[ 64.076803] Call Trace:
[ 64.076809] dump_stack+0x5c/0x77
[ 64.076817] kasan_report+0x163/0x380
[ 64.085859] ? rdma_join_multicast+0x26e/0x12c0
[ 64.086634] rdma_join_multicast+0x26e/0x12c0
[ 64.087370] ? rdma_disconnect+0xf0/0xf0
[ 64.088579] ? __radix_tree_replace+0xc3/0x110
[ 64.089132] ? node_tag_clear+0x81/0xb0
[ 64.089606] ? idr_alloc_u32+0x12e/0x1a0
[ 64.090517] ? __fprop_inc_percpu_max+0x150/0x150
[ 64.091768] ? tracing_record_taskinfo+0x10/0xc0
[ 64.092340] ? idr_alloc+0x76/0xc0
[ 64.092951] ? idr_alloc_u32+0x1a0/0x1a0
[ 64.093632] ? ucma_process_join+0x23d/0x460
[ 64.094510] ucma_process_join+0x23d/0x460
[ 64.095199] ? ucma_migrate_id+0x440/0x440
[ 64.095696] ? futex_wake+0x10b/0x2a0
[ 64.096159] ucma_join_multicast+0x88/0xe0
[ 64.096660] ? ucma_process_join+0x460/0x460
[ 64.097540] ? _copy_from_user+0x5e/0x90
[ 64.098017] ucma_write+0x174/0x1f0
[ 64.098640] ? ucma_resolve_route+0xf0/0xf0
[ 64.099343] ? rb_erase_cached+0x6c7/0x7f0
[ 64.099839] __vfs_write+0xc4/0x350
[ 64.100622] ? perf_syscall_enter+0xe4/0x5f0
[ 64.101335] ? kernel_read+0xa0/0xa0
[ 64.103525] ? perf_sched_cb_inc+0xc0/0xc0
[ 64.105510] ? syscall_exit_register+0x2a0/0x2a0
[ 64.107359] ? __switch_to+0x351/0x640
[ 64.109285] ? fsnotify+0x899/0x8f0
[ 64.111610] ? fsnotify_unmount_inodes+0x170/0x170
[ 64.113876] ? __fsnotify_update_child_dentry_flags+0x30/0x30
[ 64.115813] ? ring_buffer_record_is_on+0xd/0x20
[ 64.117824] ? __fget+0xa8/0xf0
[ 64.119869] vfs_write+0xf7/0x280
[ 64.122001] SyS_write+0xa1/0x120
[ 64.124213] ? SyS_read+0x120/0x120
[ 64.126644] ? SyS_read+0x120/0x120
[ 64.128563] do_syscall_64+0xeb/0x250
[ 64.130732] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 64.132984] RIP: 0033:0x7f5c994ade99
[ 64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99
[ 64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015
[ 64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000
[ 64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0
[ 64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0
[ 64.151060]
[ 64.153703] Disabling lock debugging due to kernel taint
[ 64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
[ 64.159066] IP: rdma_join_multicast+0x26e/0x12c0
[ 64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0
[ 64.164442] Oops: 0000 [#1] SMP KASAN PTI
[ 64.166817] CPU: 1 PID: 691 Comm: join Tainted: G B 4.16.0-rc1-00219-gb97853b65b93 #23
[ 64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4
[ 64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0
[ 64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282
[ 64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522
[ 64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297
[ 64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7
[ 64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000
[ 64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400
[ 64.196105] FS: 00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000
[ 64.199211] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0
[ 64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 64.211554] Call Trace:
[ 64.213464] ? rdma_disconnect+0xf0/0xf0
[ 64.216124] ? __radix_tree_replace+0xc3/0x110
[ 64.219337] ? node_tag_clear+0x81/0xb0
[ 64.222140] ? idr_alloc_u32+0x12e/0x1a0
[ 64.224422] ? __fprop_inc_percpu_max+0x150/0x150
[ 64.226588] ? tracing_record_taskinfo+0x10/0xc0
[ 64.229763] ? idr_alloc+0x76/0xc0
[ 64.232186] ? idr_alloc_u32+0x1a0/0x1a0
[ 64.234505] ? ucma_process_join+0x23d/0x460
[ 64.237024] ucma_process_join+0x23d/0x460
[ 64.240076] ? ucma_migrate_id+0x440/0x440
[ 64.243284] ? futex_wake+0x10b/0x2a0
[ 64.245302] ucma_join_multicast+0x88/0xe0
[ 64.247783] ? ucma_process_join+0x460/0x460
[ 64.250841] ? _copy_from_user+0x5e/0x90
[ 64.253878] ucma_write+0x174/0x1f0
[ 64.257008] ? ucma_resolve_route+0xf0/0xf0
[ 64.259877] ? rb_erase_cached+0x6c7/0x7f0
[ 64.262746] __vfs_write+0xc4/0x350
[ 64.265537] ? perf_syscall_enter+0xe4/0x5f0
[ 64.267792] ? kernel_read+0xa0/0xa0
[ 64.270358] ? perf_sched_cb_inc+0xc0/0xc0
[ 64.272575] ? syscall_exit_register+0x2a0/0x2a0
[ 64.275367] ? __switch_to+0x351/0x640
[ 64.277700] ? fsnotify+0x899/0x8f0
[ 64.280530] ? fsnotify_unmount_inodes+0x170/0x170
[ 64.283156] ? __fsnotify_update_child_dentry_flags+0x30/0x30
[ 64.286182] ? ring_buffer_record_is_on+0xd/0x20
[ 64.288749] ? __fget+0xa8/0xf0
[ 64.291136] vfs_write+0xf7/0x280
[ 64.292972] SyS_write+0xa1/0x120
[ 64.294965] ? SyS_read+0x120/0x120
[ 64.297474] ? SyS_read+0x120/0x120
[ 64.299751] do_syscall_64+0xeb/0x250
[ 64.301826] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 64.304352] RIP: 0033:0x7f5c994ade99
[ 64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99
[ 64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015
[ 64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000
[ 64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0
[ 64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0
[ 64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8
[ 64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860
[ 64.332979] CR2: 00000000000000b0
[ 64.335550] ---[ end trace 0c00c17a408849c1 ]---
Reported-by: <syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com>
Fixes: c8f6a362bf3e ("RDMA/cma: Add multicast communication support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is preparation for sharing client ID definitions
between amdgpu and amdkfd
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Bw spreadsheet was updated while dce_calcs was not
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Increase clock, if current dpp div is 0 and request dpp div is 1, request clk is
higher than maximum dpp clk as per dpm table.
set dispclk to the value of maximum supported dpp clk
set div to 1
set dispclk to request value.
Decrease clock, currrent dpp div is 1 and request dpp div is 0, current clk is
higher than maximum dpp clk as per dpm table.
set dispclk to the value of maximum supported dpp clk
set div to 0
set dispclk to request value.
v2: squash in !DCN build fix
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The order of planes is given by the order they are enumerated
by kms.
Planes with a higher ID appears above planes with a lower ID.
Currently the planes are enumerated in the wrong order,
putting the nv12 only plane after the two RGBA planes.
This patch corrects the plane enumeration order such that all
the overlay planes are initialized first then the primary planes.
Due to this change in order the dc_add_plane_to_context() shall
receive the planes in reverse order hence this patch reverses
the parsing of planes in DM side itself.
v2: drop local reverse macro for upstream
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Time stamping will be part of surface, and will be updated when address is flipped.
FreeSync parameters will be attached to stream, as it adjusts the timing dynamically.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Stats will be used for debug purposes
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The work around for hw bug causes S3 resume failure. Don't execute
disable vga logic if not in vga mode.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initializing ABM and DMCU modules for dce 80/81/83/100 as in DCE110
Adding constructors and destructors for each module.
Adding register list for DMCU in dce80 as some registers are missing
in dce80 from the basic list. DMCU is never used, so it would not have
any functional impact.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In MPO scenario when playing SDR clip in HDR desktop mode, Win is
boosting desktop and requests driver to boost MPO. But driver boosting
is currently done in regamma which is stream property and thus shared
between grph and video.
Redesigning the boosting in RV: use CM_HDR_MULT register which was added
for this scenario. It also has the benefit that it can be done in HIRQL.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use DC_LOGGER macro for logs.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These MACROS are only being used by a few files but
gets pulled in by dc.h
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This change make sure bandwidth is set properly.
For increase bandwidth, set bandwidth before backend
and front end programming.
For decrease bandwidth, set bandwidth after.
To avoid smu hang when reboot and dpms due to 0 disp clk,
keep min disp clock as 100Mhz.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Per discussion with VBIOS team, the orginal check is not correct in
all cases on latest VBIOS. Additional check is needed. This change should
maintain old behaviour on older VBIOS.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
