| Age | Commit message (Collapse) | Author |
|---|
|
Refactor: So that the overhaul of each ->accept method can be done
in separate smaller patches, temporarily move the
svcxdr_init_encode() call into those methods.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that all vs_dispatch functions invoke svcxdr_init_encode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 5531 defines an MSG_ACCEPTED Reply message like this:
struct accepted_reply {
opaque_auth verf;
union switch (accept_stat stat) {
case SUCCESS:
...
In the current server code, struct opaque_auth encoding is open-
coded. Introduce a helper that encodes an opaque_auth data item
within the context of a xdr_stream.
Done as part of hardening the server-side RPC header decoding and
encoding paths.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There's no RPC header field called rpc_stat; more precisely, the
variable appears to be recording an accept_stat value. But it looks
like we don't need to preserve this value at all, actually, so
simply remove the variable.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 5b304bc5bfcc ("[PATCH] knfsd: svcrpc: gss: fix failure on
SVC_DENIED in integrity case") added a check to prevent wrapping an
RPC response if reply_stat == MSG_DENIED, assuming that the only way
to get to svcauth_gss_release() with that reply_stat value was if
the reject_stat was AUTH_ERROR (reject_stat == MISMATCH is handled
earlier in svc_process_common()).
The code there is somewhat confusing. For one thing, rpc_success is
an accept_stat value, not a reply_stat value. The correct reply_stat
value to look for is RPC_MSG_DENIED. It happens to be the same value
as rpc_success, so it all works out, but it's not terribly readable.
Since commit 438623a06bac ("SUNRPC: Add svc_rqst::rq_auth_stat"),
the actual auth_stat value is stored in the svc_rqst, so that value
is now available to svcauth_gss_prepare_to_wrap() to make its
decision to wrap, based on direct information about the
authentication status of the RPC caller.
No behavior change is intended, this simply replaces some old code
with something that should be more self-documenting.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Actually xdr_stream does not add value here because of how
gss_wrap() works. This is just a clean-up patch.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Simplify the references to the head and tail iovecs for readability.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Match the error reporting in the other unwrap and wrap functions.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up variable names to match the other unwrap and wrap
functions.
Additionally, the explicit type cast on @gsd in unnecessary; and
@resbuf is renamed to match the variable naming in the unwrap
functions.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Replace finicky logic: Instead of trying to find scratch space in
the response buffer, use the scratch buffer from struct
gss_svc_data.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
An error computing the checksum here is an exceptional event.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: To help orient readers, name the stack variables to match
the XDR field names.
Additionally, the explicit type cast on @gsd is unnecessary; and
@resbuf is renamed to match the variable naming in the unwrap
functions.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that upper layers use an xdr_stream to track the construction
of each RPC Reply message, resbuf->len is kept up-to-date
automatically. There's no need to recompute it in svc_gss_release().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The WARN_ON_ONCE check is not terribly useful. It also seems possible
for nfs4_find_file to race with the destruction of an fi_deleg_file
while trying to take a reference to it.
Now that it's safe to pass nfs_get_file a NULL pointer, remove the WARN
and NULL pointer check. Take the fi_lock when fetching fi_deleg_file.
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
...and remove some now-useless NULL pointer checks in its callers.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently nfsd4_setup_inter_ssc returns the vfsmount of the source
server's export when the mount completes. After the copy is done
nfsd4_cleanup_inter_ssc is called with the vfsmount of the source
server and it searches nfsd_ssc_mount_list for a matching entry
to do the clean up.
The problems with this approach are (1) the need to search the
nfsd_ssc_mount_list and (2) the code has to handle the case where
the matching entry is not found which looks ugly.
The enhancement is instead of nfsd4_setup_inter_ssc returning the
vfsmount, it returns the nfsd4_ssc_umount_item which has the
vfsmount embedded in it. When nfsd4_cleanup_inter_ssc is called
it's passed with the nfsd4_ssc_umount_item directly to do the
clean up so no searching is needed and there is no need to handle
the 'not found' case.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: adjusted whitespace and variable/function names ]
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
|
|
Now the entire RPC Call header parsing path is handled via struct
xdr_stream-based decoders.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: With xdr_stream decoding, the @argv parameter is no longer
used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Saving the RPC program number in two places is
unnecessary.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Group these together for legibility.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that each ->accept method has been converted to use xdr_stream,
the svcxdr_init_decode() calls can be hoisted back up into the
generic RPC server code.
The dprintk in svc_authenticate() is removed, since
trace_svc_authenticate() reports the same information.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Micro-optimizations:
1. The value of rqstp->rq_auth_stat is replaced no matter which
arm of the switch is taken, so the initial assignment can be
safely removed.
2. Avoid checking the value of gc->gc_proc twice in the I/O
(RPC_GSS_PROC_DATA) path.
The cost is a little extra code redundancy.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: To help orient readers, name the stack variables to match
the XDR field names.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: To help orient readers, name the stack variables to match
the XDR field names.
For readability, I'm also going to rename the unwrap and wrap
functions in a consistent manner, starting with unwrap_integ_data().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up / code de-duplication - this functionality is already
available in the generic XDR layer.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The entire RPC_GSS_PROC_INIT path is converted over to xdr_stream
for decoding the Call credential and verifier.
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_read_verf() is already short. Fold it into its only caller.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_read_common_verf() is now just a wrapper for dup_netobj(), thus
it can be replaced with direct calls to dup_netobj().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pre-requisite to replacing gss_read_common_verf().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since upcalls are infrequent, ensure the compiler places the upcall
mechanism out-of-line from the I/O path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Since the server-side of the Linux kernel SunRPC implementation
ignores the contents of the Call's machinename field, there's no
need for its RPC_AUTH_UNIX authenticator to reject names that are
larger than UNX_MAXNODENAME.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 5531 defines the body of an RPC Call message like this:
struct call_body {
unsigned int rpcvers;
unsigned int prog;
unsigned int vers;
unsigned int proc;
opaque_auth cred;
opaque_auth verf;
/* procedure-specific parameters start here */
};
In the current server code, decoding a struct opaque_auth type is
open-coded in several places, and is thus difficult to harden
everywhere.
Introduce a helper for decoding an opaque_auth within the context
of a xdr_stream. This helper can be shared with all authentication
flavor implemenations, even on the client-side.
Done as part of hardening the server-side RPC header decoding paths.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor: So that the overhaul of each ->accept method can be done
in separate smaller patches, temporarily move the
svcxdr_init_decode() call into those methods.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that all vs_dispatch functions invoke svcxdr_init_decode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now with NFSD being able to cross into auto mounts,
the check can be removed.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This function is only used by NFSD to cross mount points.
If a mount point is of type auto mount, follow_down() will
not uncover it. Add LOOKUP_AUTOMOUNT to the lookup flags
to have ->d_automount() called when NFSD walks down the
mount tree.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently nfsd_mountpoint() tests for mount points using d_mountpoint(),
this works only when a mount point is already uncovered.
In our case the mount point is of type auto mount and can be coverted.
i.e. ->d_automount() was not called.
Using d_managed() nfsd_mountpoint() can test whether a mount point is
either already uncovered or can be uncovered later.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When we suspend into s2idle we also need to enable the interrupt line
that generates the MPD and HFB interrupts towards the host CPU interrupt
controller (typically the ARM GIC or MIPS L1) to make it exit s2idle.
When we suspend into other modes such as "standby" or "mem" we engage a
power management state machine which will gate off the CPU L1 controller
(priv->irq0) and ungate the side band wake-up interrupt (priv->wol_irq).
It is safe to have both enabled as wake-up sources because they are
mutually exclusive given any suspend mode.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a followup of commit 2558b8039d05 ("net: use a bounce
buffer for copying skb->mark")
x86 and powerpc define user_access_begin, meaning
that they are not able to perform user copy checks
when using user_write_access_begin() / unsafe_copy_to_user()
and friends [1]
Instead of waiting bugs to trigger on other arches,
add a check_object_size() in put_cmsg() to make sure
that new code tested on x86 with CONFIG_HARDENED_USERCOPY=y
will perform more security checks.
[1] We can not generically call check_object_size() from
unsafe_copy_to_user() because UACCESS is enabled at this point.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The recent merge from net left-over some unused code in
leftover.c - nomen omen.
Just drop the unused bits.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-02-17 - fixed
this is a pull request of 4 patches for net-next/master.
The first patch is by Yang Li and converts the ctucanfd driver to
devm_platform_ioremap_resource().
The last 3 patches are by Frank Jungclaus, target the esd_usb driver
and contains preparations for the upcoming support of the esd
CAN-USB/3 hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 81e164c4aec5 ("net: microchip: sparx5: Add automatic
selection of VCAP rule actionset") the VCAP API has the capability to
select automatically the actionset based on the actions that are attached
to the rule. So it is not needed anymore to hardcode the actionset in the
driver, therefore it is OK to remove this.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
