summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-22ASoC: Optimise WM8996 no interrupt pathMark Brown
This occurs frequently if we are in edge triggered mode as we must poll the interrupt status register until we get no more interrupts so it's worth the effort - it means we skip writing null acknowledgements to the chip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: Automatically manage WM8996 MICBIAS regulating modeMark Brown
For non-audio uses like accessory detection we can use a lower quality, unregulated microphone bias, saving a little power. As the hardware can manually enable and disable the biases we can select regulating mode automatically with supply widgets connected to the biases. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: Fix configuration of WM8996 input enablesMark Brown
There's no need for separate widgets for the enables (as the map already shows). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: WM8996 record paths need AIFCLKMark Brown
Make AIFCLK supply the record paths otherwise record will not work unless there is a simultaneous playback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-21regmap: Allow drivers to specify register defaultsMark Brown
It is useful for the register cache code to be able to specify the default values for the device registers. The major use is when restoring the register cache after suspend, knowing the register defaults allows us to skip registers that are at their default values when we resume which can be a substantial win on larger modern devices. For some devices (mostly older ones) the hardware does not support readback so the only way we can know the values is from code and so initializing the cache with default values makes it much easier for drivers work with read/modify/write updates. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-19ASoC: sta32x: Move resource allocation and release to the corresponding ↵Axel Lin
callback functions This patch includes below small fixes: 1. Move sta32x_set_bias_level() from sta32x_i2c_remove() to sta32x_remove(). 2. Remove a redundant regulator_bulk_free() call in sta32x_i2c_remove(), as we will call regulator_bulk_free() in sta32x_remove(). 3. Remove unneeded snd_soc_codec_set_drvdata(codec, NULL) in sta32x_i2c_remove. The i2c core will set the clientdata to NULL. Signed-off-by: Axel Lin <axel.lin@gmail.com> Johannes Stezenbach <js@sig21.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-19Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-19ASoC: omap: Fix build errors in ams-deltaJarkko Nikula
Fix "error: too few arguments to function 'ams_delta_set_bias_level'" build errors in ams-delta.c that were introduced after commit d4c6005 ("ASoC: Add context parameter to card DAPM callbacks") by adding dapm context to ams_delta_set_bias_level calls. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-17ASoC: Remove unreachable code in au1xac97c_drvprobe and au1xi2s_drvprobeAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: Fix check for symmetric rate enforcementSascha Hauer
The ASoC core tries to not enforce symmetric rates when two streams open simultaneously. It does so by checking rtd->rate being zero. This works exactly once after booting because it is not set to zero again when the streams close. Fix this by setting rtd->rate when no active stream is left. [This leads to lots of warnings about not enforcing the symmetry in some situations as there's a race in the userspace API where we know we've got two applications but don't know what rates they want to set. -- broonie ] Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: fsl: fix build warning in fsl_dmaTimur Tabi
The previous patch to fsl_dma.c ("fix initialization of DMA buffers") left behind an unused local variable that causes a build warning. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: Fix backport of WM8994 thermal warningMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
2011-08-17ASoC: claim the IRQ when the fsl_ssi device is probed, not openedTimur Tabi
The PowerPC Freescale SSI driver is claiming the IRQ when the IRQ when the device is opened, which means that the /proc/interrupts entry for the SSI exists only during playback or capture. This also meant that the user won't know that the IRQ number is wrong until he tries to use the device. Instead, we should claim the IRQ when the device is probed. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: Blackfin: ADAU1373 eval board supportLars-Peter Clausen
Add a machine driver to support the EVAL-ADAU1373 board connected to a Analog Devices BF5XX evaluation board. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: Add ADAU1373 codec supportLars-Peter Clausen
This patch adds support for the Analog Devices ADAU1373 audio codec. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: Implement WM8994 thermal warning and shutdown interrupt supportMark Brown
ALSA doesn't really have good mechanisms for dealing with these so we just log them - the hardware already has automatic shutdown support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: Add WM8958 noise gate supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17ASoC: Run Speyside WM8962 at 512fsMark Brown
Ensure we have access to all the advanced DSP functinality offered by the WM8962 by running the system clock at 512fs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-16ASoC: DAPM: Allow multiple mixer sources to be routed via the same switchLars-Peter Clausen
Currently it is only possible to route one source per switch into a mixer. This patch modifies the code, so that it is possible to route multiple sources into a mixer via the same switch. One use-case for this is routing a stereo channel pair into a mono-mixer via the same switch. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: Disable pulls on WM8994 AIF2 when starting itMark Brown
Pull control is availalbe for WM8994 AIF2, generally disabled as part of the GPIO configuration in order to save power after system startup. As on newer devices in the series there is no GPIO functionality on these pins this will happen less naturally so have the driver disable the pulls as the AIF is probed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: Correct revision display for WM1250-EV1 moduleMark Brown
The hardware documentation uses revision numbers starting at 1. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: Add device tree binding for WM8741Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: sta32x: shortcut the for loop to get ir and mcsAxel Lin
There is exactly one match or no match at all during the for loop iteration, thus we can break from the for loop once a match is found. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: nuc900-pcm: remove unused variable 'dai'Axel Lin
Remove unused variable 'dai' to eliminate below warning. CC sound/soc/nuc900/nuc900-pcm.o sound/soc/nuc900/nuc900-pcm.c: In function 'nuc900_dma_new': sound/soc/nuc900/nuc900-pcm.c:321: warning: unused variable 'dai' Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: soc-pcm: Remove unused global mutexAxel Lin
Since commit b8c0dab9bf3373010e857a8d3f1b594c60a348dd "ASoC: core - PCM mutex per rtd", the global pcm_mutex is not being used any more. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: soc-cache: Remove unneeded codec_drv pointer variable in ↵Axel Lin
snd_soc_lzo_get_blksize Since commit aea170a099793abcd0e6de46b947458073204241 "ASoC: soc-cache: Add reg_size as a member to snd_soc_codec", the codec_drv pointer variable is not used in snd_soc_lzo_get_blksize. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: soc-cache: Remove unneeded codec_drv pointer variable in ↵Axel Lin
snd_soc_flat_cache_init Since commit d779fce5d79525d66269c8f6e430e1515d697f3d "ASoC: soc-cache: Ensure flat compression uses a copy of the defaults cache", the codec_drv pointer variable is not used any more. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: s6000-pcm: remove unused variable 'dai'Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15Merge branch 'for-3.1' into for-3.2Mark Brown
Remove the bodge for ad193x. Conflicts: sound/soc/soc-io.c
2011-08-15ASoC: ad193x: remove cache supportScott Jiang
asoc cache layer can't support this kind of spi registers well. remove cache support and read/write registers directly Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: Add spi hw read function for 16 addr 8 data mode for ad193x fixScott Jiang
[This will be used by the ad193x driver to fix the fact that the original author of the driver put a bodge for their particular chip into a the generic ASoC register I/O abstraction layer which looked like an obvious bug which ended up getting fixed in 3.0. Sadly there were no comments documenting what was going on. A minimally invasive correction to the driver is to remove the register cache support and go direct to the hardware all the time so we're adding a new feature -- broonie] Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: ad193x: fix system clockScott Jiang
system clock is 24.576MHz instead of 12.288MHz Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: ad193x: fix dac word len settingScott Jiang
dac word len value should left shift before setting Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Acked-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-08-15ASoC: ad193x: fix registers definitionScott Jiang
fix dac word len mask and adc tdm fmt shift value Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-08-15ASoC: sta32x: Fix a memory leak if snd_soc_register_codec failsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: soc-jack: Fix checking return value of request_any_context_irqAxel Lin
request_any_context_irq() returns a negative value on failure. On success, it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.orG
2011-08-14Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-14ASoC: rx1950: Fix compilation error due to missing headerVasily Khoruzhick
Add linux/types.h to fix this compilation error: In file included from arch/arm/mach-s3c2410/include/mach/gpio-fns.h:27:0, from arch/arm/mach-s3c2410/include/mach/gpio.h:27, from /home/anarsoul/work/pda-linux/linux-next/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:18, from sound/soc/samsung/rx1950_uda1380.c:20: arch/arm/plat-samsung/include/plat/gpio-cfg.h:29:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:30:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_drvstr_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:57:2: error: expected specifier-qualifier-list before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:148:47: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:156:24: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_getpull’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:175:24: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h: In function ‘s3c_gpio_cfgrange_nopull’: arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: ‘s3c_gpio_pull_t’ undeclared (first use in this function) arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: note: each undeclared identifier is reported only once for each function it appears in arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: expected ‘)’ before numeric constant arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: too many arguments to function ‘s3c_gpio_cfgall_range’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:174:12: note: declared here arch/arm/plat-samsung/include/plat/gpio-cfg.h: At top level: arch/arm/plat-samsung/include/plat/gpio-cfg.h:199:26: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_get_drvstr’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:210:50: error: expected declaration specifiers or ‘...’ before ‘s5p_gpio_drvstr_t’ Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-14ASoC: h1940: Fix compilation error due to missing headerVasily Khoruzhick
Add linux/types.h to fix this compilation error: In file included from arch/arm/mach-s3c2410/include/mach/gpio-fns.h:27:0, from arch/arm/mach-s3c2410/include/mach/gpio.h:27, from /home/anarsoul/work/pda-linux/linux-next/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:18, from sound/soc/samsung/rx1950_uda1380.c:20: arch/arm/plat-samsung/include/plat/gpio-cfg.h:29:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:30:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_drvstr_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:57:2: error: expected specifier-qualifier-list before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:148:47: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:156:24: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_getpull’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:175:24: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h: In function ‘s3c_gpio_cfgrange_nopull’: arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: ‘s3c_gpio_pull_t’ undeclared (first use in this function) arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: note: each undeclared identifier is reported only once for each function it appears in arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: expected ‘)’ before numeric constant arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: too many arguments to function ‘s3c_gpio_cfgall_range’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:174:12: note: declared here arch/arm/plat-samsung/include/plat/gpio-cfg.h: At top level: arch/arm/plat-samsung/include/plat/gpio-cfg.h:199:26: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_get_drvstr’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:210:50: error: expected declaration specifiers or ‘...’ before ‘s5p_gpio_drvstr_t’ Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-14ASoC: Support !CONFIG_REGMAP buildsMark Brown
Since we changed regmap to be selected and register per bus rather than via the core only we can't rely on it being enabled by the ASoC core. Support compiling it out. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reported-by: Axel Lin <axel.lin@gmail.com>
2011-08-14Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-14ASoC: Remove redundant -codec from WM8750Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-14ASoC: Move WM8962 CLKREG_OVD earlierMark Brown
When the clocking registers are not overriden some of the registers are not writable. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-08-14ASoC: Disable WM8994 VMID for digital only pathsMark Brown
On WM8994 class devices only the analogue portions of the CODEC require VMID so when running digital only paths we can leave VMID disabled. On some earlier devices the FLL uses VMID so we don't use DAPM reference counting alone, we maintain an internal reference count which is also enabled and disabled by the FLL startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-14ASoC: Add VMID widget for wm_hubs devicesMark Brown
Currently this does not actually do anything, it is being introduced in order to facilitate additional power optimisations for current generation devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-14ASoC: Add device tree binding for WM8753Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-14ASoC: Add device tree binding for WM8750Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-14ASoC: Add device tree binding for WM8737Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-14ASoC: Add device tree binding for WM8728Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
generated by cgit (git 2.34.1) at 2025-09-11 20:07:20 +0000