summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-23sctp: fix overrun in sctp_diag_dump_one()Lance Richardson
The function sctp_diag_dump_one() currently performs a memcpy() of 64 bytes from a 16 byte field into another 16 byte field. Fix by using correct size, use sizeof to obtain correct size instead of using a hard-coded constant. Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Lance Richardson <lrichard@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23dwc_eth_qos: fix interrupt enable raceRabin Vincent
We currently enable interrupts before we enable NAPI. If an RX interrupt hits before we enabled NAPI then the NAPI callback is never called and we leave the hardware with RX interrupts disabled, which of course leads us to never handling received packets. Fix this by moving the interrupt enable to after we've enable NAPI and the reclaim tasklet. Fixes: cd5e41234729 ("dwc_eth_qos: do phy_start before resetting hardware") Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: lpc_eth: Check clk_prepare_enable() errorFabio Estevam
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of failure While at it, replace __lpc_eth_clock_enable() with a plain clk_prepare_enable/clk_disable_unprepare() call in order to simplify the code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: mv88e6xxx: Fix ingress rate removal for mv6131 chipsJamie Lentin
The PORT_RATE_CONTROL register works differently on 88e6095/6095f/6131 in comparison to 6123/61/65, and 0x0 disables. The distinction was lost Linux 4.1 --> 4.2 Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23phy: micrel: Reenable interrupts during resume for ksz9031Xander Huff
Like the ksz8081, the ksz9031 has the behavior where it will clear the interrupt enable bits when leaving power down. This takes advantage of the solution provided by f5aba91. Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23tcp: properly scale window in tcp_v[46]_reqsk_send_ack()Eric Dumazet
When sending an ack in SYN_RECV state, we must scale the offered window if wscale option was negotiated and accepted. Tested: Following packetdrill test demonstrates the issue : 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // Establish a connection. +0 < S 0:0(0) win 20000 <mss 1000,sackOK,wscale 7, nop, TS val 100 ecr 0> +0 > S. 0:0(0) ack 1 win 28960 <mss 1460,sackOK, TS val 100 ecr 100, nop, wscale 7> +0 < . 1:11(10) ack 1 win 156 <nop,nop,TS val 99 ecr 100> // check that window is properly scaled ! +0 > . 1:1(0) ack 1 win 226 <nop,nop,TS val 200 ecr 100> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23gianfar: fix size of scatter-gathered framesZefir Kurtisi
The current scatter-gather logic in gianfar is flawed, since it does not consider the eTSEC's RxBD 'Data Length' field is context depening: for the last fragment it contains the full frame size, while fragments contain the fragment size, which equals the value written to register MRBLR. This causes data corruption as soon as the hardware starts to fragment receiving frames. As a result, the size of fragmented frames is increased by (nr_frags - 1) * MRBLR We first noticed this issue working with DSA, where an ICMP request sized 1472 bytes causes the scatter-gather logic to kick in. The full Ethernet frame (1518) gets increased by DSA (4), GMAC_FCB_LEN (8), and FSL_GIANFAR_DEV_HAS_TIMER (priv->padding=8) to a total of 1538 octets, which is fragmented by the hardware and reconstructed by the driver to a 3074 octet frame. This patch fixes the problem by adjusting the size of the last fragment. It was tested by setting MRBLR to different multiples of 64, proving correct scatter-gather operation on frames with up to 9000 octets in size. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23gianfar: prevent fragmentation in DSA environmentsZefir Kurtisi
The eTSEC register MRBLR defines the maximum space in the RX buffers and is set to 1536 by gianfar. This reasonably covers the common use case where the MTU is kept at default 1500. In that case, the largest Ethernet frame size of 1518 plus an optional GMAC_FCB_LEN of 8, and an additional padding of 8 to handle FSL_GIANFAR_DEV_HAS_TIMER totals to 1534 and nicely fit within the chosen MRBLR. Alas, if the eTSEC is attached to a DSA enabled switch, the (E)DSA header extension (4 or 8 bytes) causes every maximum sized frame to be fragmented by the hardware. This patch increases the maximum RX buffer size by 8 and rounds up to the next multiple of 64, which the hardware's defines as RX buffer granularity. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23udp: fix poll() issue with zero sized packetsEric Dumazet
Laura tracked poll() [and friends] regression caused by commit e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") udp_poll() needs to know if there is a valid packet in receive queue, even if its payload length is 0. Change first_packet_length() to return an signed int, and use -1 as the indication of an empty queue. Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23Merge tag 'iio-fixes-for-4.8a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-linus Jonathan writes: First round of IIO fixes for the 4.8 cycle. This is somewhat of a bumper set due to my unavailabilty earlier in the month. The only slightly unusual ones are the dts updates for the rockchip adc reset. The fix in the driver only makes sense with these and the rockchip maintainer is happy with them going through IIO to reach mainline. Core stuff * Fix an issue with a blocking op when !TASK_RUNNING. This been there a while and snuck in with seemingly minor additions to some core code paths. * Tools - generic_buffer failed to initialize the channel array pointer thus in the case of no channels blows up trying to free a random memory address. * sw-trigger: - Fix config group initialization when configfs is built as a module. Drivers * ad5933 - Fix an incorrect overwrite of an error value. * ad799x - A missed assignment of the update_scan_mode callback means buffered mode doesn't work on the ad7991, ad7995 or ad7999. * ads1015 - wrong pointer returned from i2c_get_clientdata (missmatch of assumptions) * am2315 - Timestamps are reported, but never actually acquired from anywhere (so always 0) - missing buffer selects in Kconfig * am335x adc - Protect fifo1 from concurrent access. - Increase timeout waiting for ADC to be long enough in all cases. * as3935 - Timestamps are reported, but never actually acquired from anywhere (so always 0) * at91 - Fix reading of channel 3. * atlas-ph-sensor - Typo means that the scale of electrical conductivity readings is way off. * bma220 - Timestamps are reported, but never actually acquired from anywhere (so always 0) - Missing buffer selects in Kconfig * bmp280 - pass the write pointer to PTR_ERR (i.e. the one that was just checked with IS_ERR). - suspend /resume crash due to wrong assumption about what dev_get_drvdata would return. * hdc100x - It superficially appeared that smbus_read_byte commands would allow reading of the outputs in two goes. In reality it doesn't work, but instead returns the same for the upper and lower bytes (nice catch from Alison!) * kxsd9 - Fix raw read return value to ensure it actually reports the value rather than a blank string. * max44000 - Missing buffer selects in Kconfig * rockchip_saradc - Add use of reset controller to enforce a clean state of the ADC. Some bootloaders can leave it in an 'intersting' state and effectively frozen without this. A couple of associated dts updates. * stk8ba50 - Missing buffer selects in Kconfig * stx104 - Fix a possible race due to use of devm_iio_device_register when there was other stuff in the remove function.
2016-08-23x86/PCI: VMD: Fix infinite loop executing irq'sKeith Busch
We can't initialize the list head on deletion as this causes the node to point to itself, which causes an infinite loop if vmd_irq() happens to be servicing that node. The list initialization was trying to fix a bug from multiple calls to disable the same IRQ. Fix this instead by having the VMD driver track if the interrupt is enabled. [bhelgaas: changelog, add "Fixes"] Fixes: 97e923063575 ("x86/PCI: VMD: Initialize list item in IRQ disable") Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com> Tested-by: Miroslaw Drost <miroslaw.drost@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-08-23um: Don't discard .text.exit sectionAndrey Ryabinin
Commit e41f501d3912 ("vmlinux.lds: account for destructor sections") added '.text.exit' to EXIT_TEXT which is discarded at link time by default. This breaks compilation of UML: `.text.exit' referenced in section `.fini_array' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o): defined in discarded section `.text.exit' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o) Apparently UML doesn't want to discard exit text, so let's place all EXIT_TEXT sections in .exit.text. Fixes: e41f501d3912 ("vmlinux.lds: account for destructor sections") Reported-by: Stefan Traby <stefan@hello-penguin.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-08-24drm/doc: Document uapi requirements in DRMDaniel Vetter
Everyone knows them, except all the new folks joining from the ARM side haven't lived through all the pain of the past years and are entirely surprised when I raise this. Definitely time to document this. Last time this was a big discussion was about 6 years ago, when qcom tried to land a kernel driver without userspace. Dave Airlie made the rules really clear: http://airlied.livejournal.com/73115.html This write-up here is essentially what I've put into a presentation a while ago, which was also reviewed by Dave: http://blog.ffwll.ch/2015/05/gfx-kernel-upstreaming-requirements.html v2: Fix typos Eric&Rob spotted. v3: Nitpick from Jani. Cc: Dave Airlie <airlied@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Rob Clark <robdclark@gmail.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-24Merge tag 'topic/drm-misc-2016-08-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next A few bigger things: - start of splitting drm_crtc.c into more manageable and better documneted chunks - DRM_DEV_* logging (Sean) * tag 'topic/drm-misc-2016-08-23' of git://anongit.freedesktop.org/drm-intel: (46 commits) drm/fb-helper: Make docs for fb_set_suspend wrappers consistent drm/rockchip: Delete unnecessary assignment for the field "owner" drm/bridge: dw-hdmi: Delete unnecessary assignment for the field "owner" drm/rockchip: Don't continue trying to enable crtc on failure drm/fb-helper: Add drm_fb_helper_set_suspend_unlocked() drm/fb-helper: Fix the dummy remove_conflicting_framebuffers drm/udl: Ensure channel is selected before using the device. drm: Avoid calling dev_printk(.dev = NULL) drm: avoid exposing kernel stack in compat_drm_getstats reservation: fix small comment typo drm: Don't implement empty prepare_fb()/cleanup_fb() virtio-gpu: Use memdup_user() rather than duplicating its implementation GPU-DRM-Savage: Use memdup_user() rather than duplicating drm: Allow drivers to modify plane_state in prepare_fb/cleanup_fb drm/rockchip: Use DRM_DEV_ERROR in vop drm: Introduce DRM_DEV_* log messages drm/edid: CEA mode 64 1080p100 vsync pulse width incorrect Revert "drm/hisilicon: Don't set drm_device->platformdev" dma-buf: fix kernel-doc warning and typos drm: Fix kerneldoc in drm_plane_helper.c ...
2016-08-23ubifs: Fix xattr generic handler usageRichard Weinberger
UBIFS uses full names to work with xattrs, therefore we have to use xattr_full_name() to obtain the xattr prefix as string. Cc: <stable@vger.kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Fixes: 2b88fc21ca ("ubifs: Switch to generic xattr handlers") Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Tested-by: Dongsheng Yang <dongsheng081251@gmail.com>
2016-08-23ubifs: Fix assertion in layout_in_gaps()Vincent Stehlé
An assertion in layout_in_gaps() verifies that the gap_lebs pointer is below the maximum bound. When computing this maximum bound the idx_lebs count is multiplied by sizeof(int), while C pointers arithmetic does take into account the size of the pointed elements implicitly already. Remove the multiplication to fix the assertion. Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system") Cc: <stable@vger.kernel.org> Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-08-23USB: avoid left shift by -1Alan Stern
UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Vittorio Zecca <zeccav@gmail.com> Tested-by: Vittorio Zecca <zeccav@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-23drm/fb-helper: Make docs for fb_set_suspend wrappers consistentDaniel Vetter
I figured I might as well go ocd and make them booleans and rename the locked version too. v2: Review from Noralf. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Fixes: cfe63423d9be ("drm/fb-helper: Add drm_fb_helper_set_suspend_unlocked()") Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160823152727.31788-1-daniel.vetter@ffwll.ch
2016-08-23Merge tag 'usercopy-v4.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardened usercopy fixes from Kees Cook: - avoid signed math problems on unexpected compilers - avoid false positives at very end of kernel text range checks * tag 'usercopy-v4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: fix overlap check for kernel text usercopy: avoid potentially undefined behavior in pointer math
2016-08-23Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a number of memory corruption bugs in the newly added sha256-mb/sha256-mb code" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512-mb - fix ctx pointer crypto: sha256-mb - fix ctx pointer and digest copy
2016-08-23arm: dts: rockchip: add reset node for the exist saradc SoCsCaesar Wang
SARADC controller needs to be reset before programming it, otherwise it will not function properly. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-23arm64: dts: rockchip: add reset saradc node for rk3368 SoCsCaesar Wang
SARADC controller needs to be reset before programming it, otherwise it will not function properly. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-23iio: adc: rockchip_saradc: reset saradc controller before programming itCaesar Wang
SARADC controller needs to be reset before programming it, otherwise it will not function properly. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-iio@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-23drm/amd/amdgpu: Print ring name in amdgpu_ib_schedule()Tom St Denis
If the ring isn't ready lets print out which ring name to help debugging. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-23drm/radeon: remove dead code, si_mc_load_microcode (v2)Heinrich Schuchardt
In an if block for (running == 0) running cannot be non-zero. v2: agd: remove unused variable Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-23drm/radeon/cik: remove dead code (v2)Heinrich Schuchardt
In an if block for (running == 0) running cannot be non-zero. v2: agd: remove unused variable Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-23drm/amd/powerplay: avoid NULL dereference, cz_hwmgr.cHeinrich Schuchardt
if (a == NULL || a->b == NULL) leads to a NULL pointer dereference if a == NULL. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-23drm/amd/powerplay: avoid NULL pointer dereferenceHeinrich Schuchardt
if (a == NULL || a->b == NULL) leads to a NULL pointer dereference if a == NULL. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-23drm/amdgpu/gmc8: remove dead code (v2)Heinrich Schuchardt
In an if block for (running == 0) running cannot be non-zero. v2: agd: remove unused variable Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-23drm/amdgpu/gmc7: remove dead code (v2)Heinrich Schuchardt
In an if block for (running == 0) running cannot be non-zero. v2: agd: remove unused variable Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-23drm/amdgpu: Fix indentation in dce_v8_0_audio_write_sad_regs()Alexandre Demers
Fixed indentation for readability. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-23iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTSBharat Potnuri
Current cxgb4 arm CQ logic ignores IB_CQ_REPORT_MISSED_EVENTS for request completion notification on a CQ. Due to this ib_poll_handler() assumes all events polled and avoids further iopoll scheduling. This patch adds logic to cxgb4 ib_req_notify_cq() handler to check if CQ is not empty and return accordingly. Based on the return value of ib_req_notify_cq() handler, ib_poll_handler() will schedule a run of iopoll handler. Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23i40iw: Add missing check for interface already openMustafa Ismail
In i40iw_open(), check if interface is already open and return success if it is. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23i40iw: Protect req_resource_num updateMustafa Ismail
In i40iw_alloc_resource(), ensure that the update to req_resource_num is protected by the lock. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23i40iw: Change mem_resources pointer to a u8Shiraz Saleem
iwdev->mem_resources is incorrectly defined as an unsigned long instead of u8. As a result, the offset into the dynamic allocated structures in i40iw_initialize_hw_resources() is incorrectly calculated and would lead to writing of memory regions outside of the allocated buffer. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23IB/core: Use memdup_user() rather than duplicating its implementationMarkus Elfring
* Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. * The local variable "ret" will be set to an appropriate value a bit later. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23IB/qib: Use memdup_user() rather than duplicating its implementationMarkus Elfring
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23io-mapping.h: s/PAGE_KERNEL_IO/PAGE_KERNEL/Chris Wilson
PAGE_KERNEL_IO is an x86-ism. Though it is used to define the pgprot_t used for the iomapped region, it itself is just PAGE_KERNEL. On all other arches, PAGE_KERNEL_IO is undefined so in a general header we must refrain from using it. v2: include pgtable for pgprot_combine() Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: linux-mm@kvack.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160823155024.22379-1-chris@chris-wilson.co.uk
2016-08-23drm/rockchip: analogix_dp: drop unnecessary probe deferral "error" printBrian Norris
This driver is the only user of of_drm_find_panel() which prints an error before doing probe deferral, yielding messages like this on boot, before eventually succeeding: [ 2.234271] [drm:rockchip_dp_probe] *ERROR* failed to find panel ... [ 4.797539] [drm:rockchip_dp_probe] *ERROR* failed to find panel ... Let's just drop the message. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/rockchip: Enable vblank without eventSean Paul
vblank should be enabled regardless of whether an event is expected back. This is especially important for a cursor plane. Reviewed-by: Yakir Yang <ykk@rock-chips.com> Tested-by: Yakir Yang <ykk@rock-chip.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/rockchip: Improve analogix-dp psr handlingSean Paul
Remove the delayed worker, opting instead for the non-delayed variety. Also introduce a lock to ensure we don't have races with the worker and psr_state. Finally, cancel and wait for the worker to finish when disabling the bridge. Reviewed-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/rockchip: A couple small fixes to psrSean Paul
A few things that need tidying up, no functional changes. Reviewed-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/rockchip: Use a spinlock to protect psr stateSean Paul
The handling of psr state is racey, shore that up with a per-psr driver lock. Reviewed-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/rockchip: Don't use a delayed worker for psr state changesSean Paul
The delayed worker isn't needed and is racey. Remove it and do the state change in line. Reviewed-by: Yakir Yang <ykk@rock-chips.com> Tested-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/rockchip: Convert psr_list_mutex to spinlock and use itSean Paul
This patch converts the psr_list_mutex to a spinlock and locks all access to psr_list to avoid races (however unlikely they were). Reviewed-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/rockchip: analogix_dp: implement PSR functionYakir Yang
Alway enable the PSR function for Rockchip analogix_dp driver. If panel don't support PSR, then the core analogix_dp would ignore this setting. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/bridge: analogix_dp: add the PSR function supportYakir Yang
The full name of PSR is Panel Self Refresh, panel device could refresh itself with the hardware framebuffer in panel, this would make lots of sense to save the power consumption. This patch have exported two symbols for platform driver to implement the PSR function in hardware side: - analogix_dp_active_psr() - analogix_dp_inactive_psr() Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/rockchip: add an common abstracted PSR driverYakir Yang
The PSR driver have exported four symbols for specific device driver, and it's safe to call them in interrupt context: - rockchip_drm_psr_register() - rockchip_drm_psr_unregister() - rockchip_drm_psr_enable() - rockchip_drm_psr_disable() - rockchip_drm_psr_flush() Encoder driver should call the register/unregister interfaces to hook itself into common PSR driver, encoder have implement the 'psr_set' callback which use the set PSR state in hardware side. Crtc driver would call the enable/disable interfaces when vblank is enable/disable, after that the common PSR driver would call the encoder registered callback to set the PSR state. Fb driver would call the flush interface in 'fb->dirty' callback, this helper function would force all PSR enabled encoders to exit from PSR for 3 seconds. Signed-off-by: Yakir Yang <ykk@rock-chips.com> [seanpaul removed leftover psr_enabled/psr_work kruft from drm_vop.c] Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/rockchip: vop: export line flag functionYakir Yang
VOP have integrated a hardware counter which indicate the exact display line that vop is scanning. And if we're interested in a specific line, we can set the line number to vop line_flag register, and then vop would generate a line_flag interrupt for it. For example eDP PSR function is interested in the vertical blanking period, then driver could set the line number to zero. This patch have exported a symbol that allow other driver to listen the line flag event with given timeout limit: - rockchip_drm_wait_line_flag() Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-23drm/bridge: analogix_dp: Ensure the panel is properly prepared/unpreparedSean Paul
Instead of just preparing the panel on bind, actually prepare/unprepare during modeset/disable. The panel must be prepared in order to read hpd status and edid, so we need to keep state around the prepares in order to ensure we don't accidentally turn the panel off at the wrong time. Reviewed-by: Yakir Yang <ykk@rock-chips.com> Tested-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
generated by cgit (git 2.34.1) at 2025-09-24 02:54:54 +0000