| Age | Commit message (Collapse) | Author |
|---|
|
If the user sets a lower mtu on the CPU port than on the switch,
then DMA inserts a few more bytes into the buffer than expected.
In the worst case, it may exceed the size of the buffer. The
experiments showed that the buffer should be a multiple of the
burst length value. This patch rounds the length of the rx buffer
upwards and fixes this bug. The reservation of FCS space in the
buffer has been removed as PMAC strips the FCS.
Fixes: 998ac358019e ("net: lantiq: add support for jumbo frames")
Reported-by: Thomas Nixon <tom@tomn.co.uk>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Paul Blakey says:
====================
net/sched: Fix ct zone matching for invalid conntrack state
Currently, when a packet is marked as invalid conntrack_in in act_ct,
post_ct will be set, and connection info (nf_conn) will be removed
from the skb. Later openvswitch and flower matching will parse this
as ct_state=+trk+inv. But because the connection info is missing,
there is also no zone info to match against even though the packet
is tracked.
This series fixes that, by passing the last executed zone by act_ct.
The zone info is passed along from act_ct to the ct flow dissector
(used by flower to extract zone info) and to ovs, the same way as post_ct
is passed, via qdisc layer skb cb to dissector, and via skb extension
to OVS.
Since adding any more data to qdisc skb cb, there will be no room
for BPF skb cb to extend it and stay under skb->cb size, this series
moves the tc related info from within qdisc skb cb to a tc specific cb
that also extends it.
====================
Link: https://lore.kernel.org/r/20211214172435.24207-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Zone id is not restored if we passed ct and ct rejected the connection,
as there is no ct info on the skb.
Save the zone from tc skb cb to tc skb extension and pass it on to
ovs, use that info to restore the zone id for invalid connections.
Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If ct rejects a flow, it removes the conntrack info from the skb.
act_ct sets the post_ct variable so the dissector will see this case
as an +tracked +invalid state, but the zone id is lost with the
conntrack info.
To restore the zone id on such cases, set the last executed zone,
via the tc control block, when passing ct, and read it back in the
dissector if there is no ct info on the skb (invalid connection).
Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BPF layer extends the qdisc control block via struct bpf_skb_data_end
and because of that there is no more room to add variables to the
qdisc layer control block without going over the skb->cb size.
Extend the qdisc control block with a tc control block,
and move all tc related variables to there as a pre-step for
extending the tc control block with additional members.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fix from Damien Le Moal:
"A single fix for this cycle:
- Check that ATA16 passthrough commands that do not transfer any data
have a DMA direction set to DMA_NONE (From George)"
* tag 'libata-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
libata: if T_LENGTH is zero, dma direction should be DMA_NONE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
"One fix and one trivial update for rc6:
- Add MODULE_ALIAS_FS to get automatic module loading on mount
(Naohiro)
- Update Damien's email address in the MAINTAINERS file (me)"
* tag 'zonefs-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
MAITAINERS: Change zonefs maintainer email address
zonefs: add MODULE_ALIAS_FS
|
|
According to the official Microsoft MS-SMB2 document section 3.3.5.4, this
flag should be used only for 3.0 and 3.0.2 dialects. Setting it for 3.1.1
is a violation of the specification.
This causes my Windows 10 client to detect an anomaly in the negotiation,
and disable encryption entirely despite being explicitly enabled in ksmbd,
causing all data transfers to go in plain text.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org # v5.15
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Marcos Del Sol Vives <marcos@orca.pet>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
mount.cifs can pass a device with multiple delimiters in it. This will
cause rename(2) to fail with ENOENT.
V2:
- Make sanitize_path more readable.
- Fix multiple delimiters between UNC and prepath.
- Avoid a memory leak if a bad user starts putting a lot of delimiters
in the path on purpose.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2031200
Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api")
Cc: stable@vger.kernel.org # 5.11+
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We have a cyclic dependency between fscache super cookie
and root inode cookie. The super cookie relies on
tcon->resource_id, which gets populated from the root inode
number. However, fetching the root inode initializes inode
cookie as a child of super cookie, which is yet to be populated.
resource_id is only used as auxdata to check the validity of
super cookie. We can completely avoid setting resource_id to
remove the circular dependency. Since vol creation time and
vol serial numbers are used for auxdata, we should be fine.
Additionally, there will be auxiliary data check for each
inode cookie as well.
Fixes: 5bf91ef03d98 ("cifs: wait for tcon resource_id before getting fscache super")
CC: David Howells <dhowells@redhat.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There appears to be a spelling mistake in a bpf test message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211217182400.39296-1-colin.i.king@gmail.com
|
|
This reverts commit bd0687c18e635b63233dc87f38058cd728802ab4.
This patch causes a Tx only workload to go to sleep even when it does
not have to, leading to misserable performance in skb mode. It fixed
one rare problem but created a much worse one, so this need to be
reverted while I try to craft a proper solution to the original
problem.
Fixes: bd0687c18e63 ("xsk: Do not sleep in poll() when need_wakeup set")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211217145646.26449-1-magnus.karlsson@gmail.com
|
|
Even after commit e1d7ba873555 ("time: Always make sure wall_to_monotonic
isn't positive") it is still possible to make wall_to_monotonic positive
by running the following code:
int main(void)
{
struct timespec time;
clock_gettime(CLOCK_MONOTONIC, &time);
time.tv_nsec = 0;
clock_settime(CLOCK_REALTIME, &time);
return 0;
}
The reason is that the second parameter of timespec64_compare(), ts_delta,
may be unnormalized because the delta is calculated with an open coded
substraction which causes the comparison of tv_sec to yield the wrong
result:
wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 }
ts_delta = { .tv_sec = -9, .tv_nsec = -900000000 }
That makes timespec64_compare() claim that wall_to_monotonic < ts_delta,
but actually the result should be wall_to_monotonic > ts_delta.
After normalization, the result of timespec64_compare() is correct because
the tv_sec comparison is not longer misleading:
wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 }
ts_delta = { .tv_sec = -10, .tv_nsec = 100000000 }
Use timespec64_sub() to ensure that ts_delta is normalized, which fixes the
issue.
Fixes: e1d7ba873555 ("time: Always make sure wall_to_monotonic isn't positive")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211213135727.1656662-1-liaoyu15@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One driver fix: the pm8001 has never actually worked on a system with
an IOMMU and this fixes that use case"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes, almost all error handling one-liners and for stable.
- regression fix in directory logging items
- regression fix of extent buffer status bits handling after an error
- fix memory leak in error handling path in tree-log
- fix freeing invalid anon device number when handling errors during
subvolume creation
- fix warning when freeing leaf after subvolume creation failure
- fix missing blkdev put in device scan error handling
- fix invalid delayed ref after subvolume creation failure"
* tag 'for-5.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix missing blkdev_put() call in btrfs_scan_one_device()
btrfs: fix warning when freeing leaf after subvolume creation failure
btrfs: fix invalid delayed ref after subvolume creation failure
btrfs: check WRITE_ERR when trying to read an extent buffer
btrfs: fix missing last dir item offset update when logging directory
btrfs: fix double free of anon_dev after failure to create subvolume
btrfs: fix memory leak in __add_inode_ref()
|
|
If the workqueue allocation fails, the driver is marked as not initialized,
and timer and panic_notifier will be left registered.
Instead of removing those when workqueue allocation fails, do the workqueue
initialization before doing it, and cleanup srcu_struct if it fails.
Fixes: 1d49eb91e86e ("ipmi: Move remove_work to dedicated workqueue")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Cc: stable@vger.kernel.org
Message-Id: <20211217154410.1228673-2-cascardo@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
In case, init_srcu_struct fails (because of memory allocation failure), we
might proceed with the driver initialization despite srcu_struct not being
entirely initialized.
Fixes: 913a89f009d9 ("ipmi: Don't initialize anything in the core until something uses it")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Message-Id: <20211217154410.1228673-1-cascardo@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"Another small SELinux fix for v5.16 to ensure that we don't block on
memory allocations while holding a spinlock.
This passes all our tests without problem"
* tag 'selinux-pr-20211217' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix sleeping function called from invalid context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of DT updates for the SiFive HiFive Unmatched, that fix the
regulator handling. These should stop some warning spew.
- A pair of fixes for both the SiFive Hifive Unleashed and Unmatched,
that correctly hook up the MMC card detect signal.
* tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: sifive unmatched: Link the tmp451 with its power supply
riscv: dts: sifive unmatched: Fix regulator for board rev3
riscv: dts: sifive unmatched: Expose the PMIC sub-functions
riscv: dts: sifive unmatched: Expose the board ID eeprom
riscv: dts: sifive unmatched: Name gpio lines
riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot
riscv: dts: unleashed: Add gpio card detect to mmc-spi-slot
|
|
Pull block fixes from Jens Axboe:
- Fix for hammering on the delayed run queue timer (me)
- bcache regression fix for this merge window (Lin)
- Fix a divide-by-zero in the blk-iocost code (Tejun)
* tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block:
bcache: fix NULL pointer reference in cached_dev_detach_finish
block: reduce kblockd_mod_delayed_work_on() CPU consumption
iocost: Fix divide-by-zero on donation from low hweight cgroup
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix, fixing an issue with the worker creation change
that was merged last week"
* tag 'io_uring-5.16-2021-12-17' of git://git.kernel.dk/linux-block:
io-wq: drop wqe lock before creating new worker
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes, notably:
- uninit variable fix for dw-axi-dmac driver
- return value check dw-edma driver
- calling wq quiesce inside spinlock and missed completion for idxd
driver
- mod alias fix for st_fdma driver"
* tag 'dmaengine-fix-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: st_fdma: fix MODULE_ALIAS
dmaengine: idxd: fix missed completion on abort path
dmaengine: ti: k3-udma: Fix smatch warnings
dmaengine: idxd: fix calling wq quiesce inside spinlock
dmaengine: dw-edma: Fix return value check for dma_set_mask_and_coherent()
dmaengine: dw-axi-dmac: Fix uninitialized variable in axi_chan_block_xfer_start()
|
|
Currently cleaned_count is initialized to ICE_DESC_UNUSED(rx_ring) and
later on during the Rx processing it is incremented per each frame that
driver consumed. This can result in excessive buffers requested from xsk
pool based on that value.
To address this, just drop cleaned_count and pass
ICE_DESC_UNUSED(rx_ring) directly as a function argument to
ice_alloc_rx_bufs_zc(). Idea is to ask for buffers as many as consumed.
Let us also call ice_alloc_rx_bufs_zc unconditionally at the end of
ice_clean_rx_irq_zc. This has been changed in that way for corresponding
ice_clean_rx_irq, but not here.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit ac6f733a7bd5 ("ice: allow empty Rx descriptors") stated that ice
HW can produce empty descriptors that are valid and they should be
processed.
Add this support to xsk ZC path to avoid potential processing problems.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The descriptor that ntu is pointing at when we exit
ice_alloc_rx_bufs_zc() should not have its corresponding DD bit cleared
as descriptor is not allocated in there and it is not valid for HW
usage.
The allocation routine at the entry will fill the descriptor that ntu
points to after it was set to ntu + nb_buffs on previous call.
Even the spec says:
"The tail pointer should be set to one descriptor beyond the last empty
descriptor in host descriptor ring."
Therefore, step away from clearing the status_error0 on ntu + nb_buffs
descriptor.
Fixes: db804cfc21e9 ("ice: Use the xsk batched rx allocation interface")
Reported-by: Elza Mathew <elza.mathew@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The 'if (ntu == rx_ring->count)' block in ice_alloc_rx_buffers_zc()
was previously residing in the loop, but after introducing the
batched interface it is used only to wrap-around the NTU descriptor,
thus no more need to assign 'xdp'.
Fixes: db804cfc21e9 ("ice: Use the xsk batched rx allocation interface")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, the zero-copy data path is reusing the memory region that was
initially allocated for an array of struct ice_rx_buf for its own
purposes. This is error prone as it is based on the ice_rx_buf struct
always being the same size or bigger than what the zero-copy path needs.
There can also be old values present in that array giving rise to errors
when the zero-copy path uses it.
Fix this by freeing the ice_rx_buf region and allocating a new array for
the zero-copy path that has the right length and is initialized to zero.
Fixes: 57f7f8b6bc0b ("ice: Use xdp_buf instead of rx_buf for xsk zero-copy")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Pull drm fixes from Dave Airlie:
"Mostly amdgpu fixes this week scattered around the driver, otherwise
one i915, one ast, one simpledrm. There is a revert in the fb-helper
for places userspace was using a string that we tried to change.
i915:
- Fix a bound check in the DMC fw load.
ast:
- NULL ptr deref fix
simpledrm:
- pixel clock units fix
fb-helper:
- userspace regression revert
amdgpu:
- Fix RLC register offset
- GMC fix
- Properly cache SMU FW version on Yellow Carp
- Fix missing callback on DCN3.1
- Reset DMCUB before HW init
- Fix for GMC powergating on PCO
- Fix a possible memory leak in GPU metrics table handling on RN"
* tag 'drm-fixes-2021-12-17-1' of git://anongit.freedesktop.org/drm/drm:
drm/amd/pm: fix a potential gpu_metrics_table memory leak
drm/amdgpu: correct the wrong cached state for GMC on PICASSO
drm/amd/display: Reset DMCUB before HW init
drm/amd/display: Set exit_optimized_pwr_state for DCN31
drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YC
drm/amdgpu: don't override default ECO_BITs setting
drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORE
drm/i915/display: Fix an unsigned subtraction which can never be negative.
drm/ast: potential dereference of null pointer
drm: simpledrm: fix wrong unit with pixel clock
Revert "drm/fb-helper: improve DRM fbdev emulation device names"
|
|
Currently we only NULL the xdp_buff pointer in the internal SW ring but
we never give it back to the xsk buffer pool. This means that buffers
can be leaked out of the buff pool and never be used again.
Add missing xsk_buff_free() call to the routine that is supposed to
clean the entries that are left in the ring so that these buffers in the
umem can be used by other sockets.
Also, only go through the space that is actually left to be cleaned
instead of a whole ring.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Used on gfx9 based systems. Fixes incorrect CU counts reported
in the kernel log.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1833
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
enabled
Play a video on the raven (or PCO, raven2) platform, and then do the S3
test. When resume, the following error will be reported:
amdgpu 0000:02:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring
vcn_dec test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block
<vcn_v1_0> failed -110
amdgpu 0000:02:00.0: amdgpu: amdgpu_device_ip_resume failed (-110).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110
[why]
When playing the video: The power state flag of the vcn block is set to
POWER_STATE_ON.
When doing suspend: There is no change to the power state flag of the
vcn block, it is still POWER_STATE_ON.
When doing resume: Need to open the power gate of the vcn block and set
the power state flag of the VCN block to POWER_STATE_ON.
But at this time, the power state flag of the vcn block is already
POWER_STATE_ON. The power status flag check in the "8f2cdef drm/amd/pm:
avoid duplicate powergate/ungate setting" patch will return the
amdgpu_dpm_set_powergating_by_smu function directly.
As a result, the gate of the power was not opened, causing the
subsequent ring test to fail.
[how]
In the suspend function of the vcn block, explicitly change the power
state flag of the vcn block to POWER_STATE_OFF.
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Fix the message argument.
0: Allow power down
1: Disallow power down
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The job embedded fence donesn't initialize the flags at
dma_fence_init(). Then we will go a wrong way in
amdgpu_fence_get_timeline_name callback and trigger a null pointer panic
once we enabled the trace event here. So introduce new amdgpu_fence
object to indicate the job embedded fence.
[ 156.131790] BUG: kernel NULL pointer dereference, address: 00000000000002a0
[ 156.131804] #PF: supervisor read access in kernel mode
[ 156.131811] #PF: error_code(0x0000) - not-present page
[ 156.131817] PGD 0 P4D 0
[ 156.131824] Oops: 0000 [#1] PREEMPT SMP PTI
[ 156.131832] CPU: 6 PID: 1404 Comm: sdma0 Tainted: G OE 5.16.0-rc1-custom #1
[ 156.131842] Hardware name: Gigabyte Technology Co., Ltd. Z170XP-SLI/Z170XP-SLI-CF, BIOS F20 11/04/2016
[ 156.131848] RIP: 0010:strlen+0x0/0x20
[ 156.131859] Code: 89 c0 c3 0f 1f 80 00 00 00 00 48 01 fe eb 0f 0f b6 07 38 d0 74 10 48 83 c7 01 84 c0 74 05 48 39 f7 75 ec 31 c0 c3 48 89 f8 c3 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31
[ 156.131872] RSP: 0018:ffff9bd0018dbcf8 EFLAGS: 00010206
[ 156.131880] RAX: 00000000000002a0 RBX: ffff8d0305ef01b0 RCX: 000000000000000b
[ 156.131888] RDX: ffff8d03772ab924 RSI: ffff8d0305ef01b0 RDI: 00000000000002a0
[ 156.131895] RBP: ffff9bd0018dbd60 R08: ffff8d03002094d0 R09: 0000000000000000
[ 156.131901] R10: 000000000000005e R11: 0000000000000065 R12: ffff8d03002094d0
[ 156.131907] R13: 000000000000001f R14: 0000000000070018 R15: 0000000000000007
[ 156.131914] FS: 0000000000000000(0000) GS:ffff8d062ed80000(0000) knlGS:0000000000000000
[ 156.131923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 156.131929] CR2: 00000000000002a0 CR3: 000000001120a005 CR4: 00000000003706e0
[ 156.131937] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 156.131942] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 156.131949] Call Trace:
[ 156.131953] <TASK>
[ 156.131957] ? trace_event_raw_event_dma_fence+0xcc/0x200
[ 156.131973] ? ring_buffer_unlock_commit+0x23/0x130
[ 156.131982] dma_fence_init+0x92/0xb0
[ 156.131993] amdgpu_fence_emit+0x10d/0x2b0 [amdgpu]
[ 156.132302] amdgpu_ib_schedule+0x2f9/0x580 [amdgpu]
[ 156.132586] amdgpu_job_run+0xed/0x220 [amdgpu]
v2: fix mismatch warning between the prototype and function name (Ray, kernel test robot)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit 2aa36604e824 ("PM: sleep: Avoid calling put_device() under
dpm_list_mtx") forgot to update the while () loop termination
condition to also break the loop if error is nonzero, which
causes the loop to become infinite if device_prepare() returns
an error for one device.
Add the missing !error check.
Fixes: 2aa36604e824 ("PM: sleep: Avoid calling put_device() under dpm_list_mtx")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
|
|
Add generic compatible string "ns16550a" to serial port nodes of Armada
38x.
This makes it possible to use earlycon.
Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
CN9130 has a built-in CP115 which has 2 GPIO controllers, but unlike in
Armada 7k and 8k both are left disabled by the SoC DTSI.
This first of all makes no sense as they are always present due to being
SoC built-in and its an issue as boards like CN9130-CRB use the CPO GPIO2
pins for regulators and SD card support without enabling them first.
So, enable both of them like Armada 7k and 8k do.
Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
CN9130 has one CP115 built in, which like the CP110 has 2 GPIO and 2 SPI
controllers built-in.
However, unlike the Armada 7k and 8k the SoC DTSI doesn't add the required
aliases as both the Orion SPI driver and MVEBU GPIO drivers require the
aliases to be present.
So add the required aliases for GPIO and SPI controllers.
Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the
reference xtal clock. So add missing xtal clock source into comphy device
tree node. If the property is not present, the driver defaults to 25 MHz
xtal rate (which, as far as we know, is used by all the existing boards).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The CN9130-CRB boards have a MV88E6393X switch connected to eth0. Add
the necessary dts nodes and properties for this.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Enable the CP0 GPIO devices for the CN9130-CRB. This is needed for a
number of the peripheral devices to function.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The SGX selftest fails to build on tip/x86/sgx:
main.c: In function ‘get_total_epc_mem’:
main.c:296:17: error: implicit declaration of function ‘__cpuid’ [-Werror=implicit-function-declaration]
296 | __cpuid(&eax, &ebx, &ecx, &edx);
| ^~~~~~~
Include cpuid.h and use __cpuid_count() macro in order to fix the
compilation issue.
[ dhansen: tweak commit message ]
Fixes: f0ff2447b861 ("selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211204202355.23005-1-jarkko@kernel.org
Cc: Shuah Khan <shuah@kernel.org>
|
|
Enable at least the same amount of algs as the hardware IPs are
supporting so that they are able to fallback to the software
implementations in case they need it.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211215134311.304427-1-tudor.ambarus@microchip.com
|
|
sama7g5ek comes with a SPI NOR flash connected to the QSPI
controller. Enable the SPI NOR subsystem and the QSPI controller.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211209153744.357465-2-tudor.ambarus@microchip.com
|
|
Not all .S files include asm/assembler.h, however the SYM_FUNC_*
definitions invoke the 'bti' macro. Include asm/assembler.h in
asm/linkage.h.
Fixes: 9be34be87cc8 ("arm64: Add macro version of the BTI instruction")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This reverts commit 796eed4b2342c9d6b26c958e92af91253a2390e1.
This change causes boot lockups when using "arlyprintk=xdbc" because
ktime can not be used at this point in time in the boot process. Also,
it is not needed for very small delays like this.
Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Fixes: 796eed4b2342 ("usb: early: convert to readl_poll_timeout_atomic()")
Link: https://lore.kernel.org/r/c2b5c9bb-1b75-bf56-3754-b5b18812d65e@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.17
- Enable support for the new R-Car S4-8 SoC in the arm64 defconfig.
* tag 'renesas-arm-defconfig-for-v5.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R-Car S4-8
Link: https://lore.kernel.org/r/cover.1639736717.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Some new drivers changes for the Allwinner SoCs, fixing the shutdown
path of the RSB driver
* tag 'sunxi-drivers-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Fix shutdown
Link: https://lore.kernel.org/r/6f2f75ad-de62-49a4-82a4-8655a567a09e.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.17 (take two)
- Core support for the R-Car S4-8 (R8A779F0) SoC, including System
Controller (SYSC) and Reset (RST) support.
* tag 'renesas-drivers-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rcar-rst: Add support for R-Car S4-8
soc: renesas: Identify R-Car S4-8
soc: renesas: r8a779f0-sysc: Add r8a779f0 support
soc: renesas: rcar-gen4-sysc: Introduce R-Car Gen4 SYSC driver
dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779f0 SYSC power domain definitions
Link: https://lore.kernel.org/r/cover.1639736722.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.17 (take two)
- Document support for the R-Car S4-8 Spider CPU and BreakOut boards.
* tag 'renesas-dt-bindings-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas Spider boards
Link: https://lore.kernel.org/r/cover.1639736725.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.17 (take two)
- Initial support for the R-Car S4-8 SoC on the Spider CPU and
BreakOut boards,
- MIPI DSI display support for the R-Car V3u SoC and the Falcon board
stack,
- Thermal and GPU support for the RZ/G2L SoC and the RZ/G2L SMARC EVK
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Fix pin controller node names
arm64: dts: renesas: rzg2l-smarc-som: Add vdd core regulator
arm64: dts: renesas: r9a07g044: Add Mali-G31 GPU node
arm64: dts: renesas: r9a07g044: Create thermal zone to support IPA
arm64: dts: renesas: r9a07g044: Add TSU node
arm64: dts: renesas: falcon-cpu: Add DSI display output
arm64: dts: renesas: r8a779a0: Add DSI encoders
arm64: dts: renesas: Add Renesas Spider boards support
arm64: dts: renesas: Add Renesas R8A779F0 SoC support
dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779f0 SYSC power domain definitions
arm64: dts: renesas: Fix thermal bindings
Link: https://lore.kernel.org/r/cover.1639736718.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
