| Age | Commit message (Collapse) | Author |
|---|
|
Currently the intel_soc_pmic_bxtwc, intel_soc_pmic_chtwc and
intel_soc_pmic_crc PMIC drivers use more or less free form strings
for their driver name.
Where as intel_soc_pmic_chtdc_ti and intel_soc_pmic_mrfld use the driver's
filename as driver name.
Update the 3 others to also use the driver's filename to make the naming
consistent.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241104150655.41402-2-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document the qcom,msm8917-tcsr compatible.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241031-msm8917-v2-8-8a075faa89b1@mainlining.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
When probing if default LED state is on then default brightness will be
applied instead of max brightness.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20241105185006.1380166-3-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Optional default-brightness property specifies brightness value to be
used if default LED state is on.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241105185006.1380166-2-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
We run into an exhaustion problem with the kernel-allocated filter IDs.
Our allocation problem can be fixed on the user space side,
but the error message in this case was quite misleading:
"Filter with specified priority/protocol not found" (EINVAL)
Specifically when we can't allocate a _new_ ID because filter with
lowest ID already _exists_, saying "filter not found", is confusing.
Kernel allocates IDs in range of 0xc0000 -> 0x8000, giving out ID one
lower than lowest existing in that range. The error message makes sense
when tcf_chain_tp_find() gets called for GET and DEL but for NEW we
need to provide more specific error messages for all three cases:
- user wants the ID to be auto-allocated but filter with ID 0x8000
already exists
- filter already exists and can be replaced, but user asked
for a protocol change
- filter doesn't exist
Caller of tcf_chain_tp_insert_unique() doesn't set extack today,
so don't bother plumbing it in.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20241108010254.2995438-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Michal Luczaj says:
====================
virtio/vsock: Fix memory leaks
Short series fixing some memory leaks that I've stumbled upon while toying
with the selftests.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Link: https://patch.msgid.link/20241107-vsock-mem-leaks-v2-0-4e21bfcfc818@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a missing kfree_skb() to prevent memory leaks.
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kernel queues MSG_ZEROCOPY completion notifications on the error queue.
Where they remain, until explicitly recv()ed. To prevent memory leaks,
clean up the queue when the socket is destroyed.
unreferenced object 0xffff8881028beb00 (size 224):
comm "vsock_test", pid 1218, jiffies 4294694897
hex dump (first 32 bytes):
90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff ..!.......!.....
00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff ..........!.....
backtrace (crc 6c7031ca):
[<ffffffff81418ef7>] kmem_cache_alloc_node_noprof+0x2f7/0x370
[<ffffffff81d35882>] __alloc_skb+0x132/0x180
[<ffffffff81d2d32b>] sock_omalloc+0x4b/0x80
[<ffffffff81d3a8ae>] msg_zerocopy_realloc+0x9e/0x240
[<ffffffff81fe5cb2>] virtio_transport_send_pkt_info+0x412/0x4c0
[<ffffffff81fe6183>] virtio_transport_stream_enqueue+0x43/0x50
[<ffffffff81fe0813>] vsock_connectible_sendmsg+0x373/0x450
[<ffffffff81d233d5>] ____sys_sendmsg+0x365/0x3a0
[<ffffffff81d246f4>] ___sys_sendmsg+0x84/0xd0
[<ffffffff81d26f47>] __sys_sendmsg+0x47/0x80
[<ffffffff820d3df3>] do_syscall_64+0x93/0x180
[<ffffffff8220012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360
[<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120
[<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0
[<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310
[<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0
[<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140
[<ffffffff810fc6ac>] process_one_work+0x20c/0x570
[<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0
[<ffffffff811070dd>] kthread+0xdd/0x110
[<ffffffff81044fdd>] ret_from_fork+0x2d/0x50
[<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30
Fixes: 3fe356d58efa ("vsock/virtio: discard packets only when socket is really closed")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fix dtbs_check errors in following files:
arch/arm64/boot/dts/marvell/armada-7040-db.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-db.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dtb: sata@540000:
Unevaluated properties are not allowed ('iommus' was unexpected)
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241109094623.37518-4-linux@fw-web.de
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Introduce a fault injection mechanism to force skb reallocation. The
primary goal is to catch bugs related to pointer invalidation after
potential skb reallocation.
The fault injection mechanism aims to identify scenarios where callers
retain pointers to various headers in the skb but fail to reload these
pointers after calling a function that may reallocate the data. This
type of bug can lead to memory corruption or crashes if the old,
now-invalid pointers are used.
By forcing reallocation through fault injection, we can stress-test code
paths and ensure proper pointer management after potential skb
reallocations.
Add a hook for fault injection in the following functions:
* pskb_trim_rcsum()
* pskb_may_pull_reason()
* pskb_trim()
As the other fault injection mechanism, protect it under a debug Kconfig
called CONFIG_FAIL_SKB_REALLOC.
This patch was *heavily* inspired by Jakub's proposal from:
https://lore.kernel.org/all/20240719174140.47a868e6@kernel.org/
CC: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20241107-fault_v6-v6-1-1b82cb6ecacd@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Menglong Dong says:
====================
net: ip: add drop reasons to input route
In this series, we mainly add some skb drop reasons to the input path of
ip routing, and we make the following functions return drop reasons:
fib_validate_source()
ip_route_input_mc()
ip_mc_validate_source()
ip_route_input_slow()
ip_route_input_rcu()
ip_route_input_noref()
ip_route_input()
ip_mkroute_input()
__mkroute_input()
ip_route_use_hint()
And following new skb drop reasons are added:
SKB_DROP_REASON_IP_LOCAL_SOURCE
SKB_DROP_REASON_IP_INVALID_SOURCE
SKB_DROP_REASON_IP_LOCALNET
SKB_DROP_REASON_IP_INVALID_DEST
Changes since v4:
- in the 6th patch: remove the unneeded "else" in ip_expire()
- in the 8th patch: delete the unneeded comment in __mkroute_input()
- in the 9th patch: replace "return 0" with "return SKB_NOT_DROPPED_YET"
in ip_route_use_hint()
Changes since v3:
- don't refactor fib_validate_source/__fib_validate_source, and introduce
a wrapper for fib_validate_source() instead in the 1st patch.
- some small adjustment in the 4-7 patches
Changes since v2:
- refactor fib_validate_source and __fib_validate_source to make
fib_validate_source return drop reasons
- add the 9th and 10th patches to make this series cover the input route
code path
Changes since v1:
- make ip_route_input_noref/ip_route_input_rcu/ip_route_input_slow return
drop reasons, instead of passing a local variable to their function
arguments.
====================
Link: https://patch.msgid.link/20241107125601.1076814-1-dongml2@chinatelecom.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In this commit, we make ip_route_use_hint() return drop reasons. The
drop reasons that we return are similar to what we do in
ip_route_input_slow(), and no drop reasons are added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In this commit, we make ip_mkroute_input() and __mkroute_input() return
drop reasons.
The drop reason "SKB_DROP_REASON_ARP_PVLAN_DISABLE" is introduced for
the case: the packet which is not IP is forwarded to the in_dev, and
the proxy_arp_pvlan is not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In this commit, we make ip_route_input() return skb drop reasons that come
from ip_route_input_noref().
Meanwhile, adjust all the call to it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In this commit, we make ip_route_input_noref() return drop reasons, which
come from ip_route_input_rcu().
We need adjust the callers of ip_route_input_noref() to make sure the
return value of ip_route_input_noref() is used properly.
The errno that ip_route_input_noref() returns comes from ip_route_input
and bpf_lwt_input_reroute in the origin logic, and we make them return
-EINVAL on error instead. In the following patch, we will make
ip_route_input() returns drop reasons too.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In this commit, we make ip_route_input_rcu() return drop reasons, which
come from ip_route_input_mc() and ip_route_input_slow().
The only caller of ip_route_input_rcu() is ip_route_input_noref(). We
adjust it by making it return -EINVAL on error and ignore the reasons that
ip_route_input_rcu() returns. In the following patch, we will make
ip_route_input_noref() returns the drop reasons.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In this commit, we make ip_route_input_slow() return skb drop reasons,
and following new skb drop reasons are added:
SKB_DROP_REASON_IP_INVALID_DEST
The only caller of ip_route_input_slow() is ip_route_input_rcu(), and we
adjust it by making it return -EINVAL on error.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make ip_mc_validate_source() return drop reason, and adjust the call of
it in ip_route_input_mc().
Another caller of it is ip_rcv_finish_core->udp_v4_early_demux, and the
errno is not checked in detail, so we don't do more adjustment for it.
The drop reason "SKB_DROP_REASON_IP_LOCALNET" is added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make ip_route_input_mc() return drop reason, and adjust the call of it
in ip_route_input_rcu().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In this commit, we make fib_validate_source() and __fib_validate_source()
return -reason instead of errno on error.
The return value of fib_validate_source can be -errno, 0, and 1. It's hard
to make fib_validate_source() return drop reasons directly.
The fib_validate_source() will return 1 if the scope of the source(revert)
route is HOST. And the __mkroute_input() will mark the skb with
IPSKB_DOREDIRECT in this case (combine with some other conditions). And
then, a REDIRECT ICMP will be sent in ip_forward() if this flag exists. We
can't pass this information to __mkroute_input if we make
fib_validate_source() return drop reasons.
Therefore, we introduce the wrapper fib_validate_source_reason() for
fib_validate_source(), which will return the drop reasons on error.
In the origin logic, LINUX_MIB_IPRPFILTER will be counted if
fib_validate_source() return -EXDEV. And now, we need to adjust it by
checking "reason == SKB_DROP_REASON_IP_RPFILTER". However, this will take
effect only after the patch "net: ip: make ip_route_input_noref() return
drop reasons", as we can't pass the drop reasons from
fib_validate_source() to ip_rcv_finish_core() in this patch.
Following new drop reasons are added in this patch:
SKB_DROP_REASON_IP_LOCAL_SOURCE
SKB_DROP_REASON_IP_INVALID_SOURCE
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Volume buttons on Lenovo Thinkpad X12 Detachable Tablet Gen 1 did not
send any input events when pressed. When loading intel-hid with the 5
Button Array explicitly enabled, the buttons functioned normally.
Adds the X12 Detachable Tablet Gen 1 to the `button_array_table`.
However, the driver is unable to call INTEL_HID_DSM_BTNE_FN and prints
the warning "failed to set button capability" when attempting to enable
or disable the 5 Button Array. The warning should be harmless and
adding more special handling to avoid it is not worth it.
Co-developed-by: Mary Strodl <mstrodl@csh.rit.edu>
Signed-off-by: Mary Strodl <mstrodl@csh.rit.edu>
Signed-off-by: Cole Stowell <cole@stowell.pro>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107205908.69279-1-cole@stowell.pro
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
After the file got split, there are now W=1 warnings for users that
include it without referencing hsmp_msg_desc_table:
In file included from arch/x86/include/asm/amd_hsmp.h:6,
from drivers/platform/x86/amd/hsmp/plat.c:12:
arch/x86/include/uapi/asm/amd_hsmp.h:91:35: error: 'hsmp_msg_desc_table' defined but not used [-Werror=unused-const-variable=]
91 | static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
| ^~~~~~~~~~~~~~~~~~~
Mark it as __attribute__((maybe_unused)) to shut up the warning but
keep it in the file in case it is used from userland. The __maybe_unused
shorthand unfortunately isn't available in userspace, so this has to
be the long form.
While it is not envisioned a normal userspace program could benefit
from having this table as part of UAPI, it seems there is non-zero
chance this array is used by some userspace tests so it is retained for
now (see the Link below).
Fixes: e47c018a0ee6 ("platform/x86/amd/hsmp: Move platform device specific code to plat.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/platform-driver-x86/CAPhsuW7mDRswhVjYf+4iinO+sph_rQ1JykEof+apoiSOVwOXXQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20241028163553.2452486-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into staging-merge
xfs: improve ondisk structure checks [v5.5 10/10]
Reorganize xfs_ondisk.h to group the build checks by type, then add a
bunch of missing checks that were in xfs/122 but not the build system.
With this, we can get rid of xfs/122.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into staging-merge
xfs: enable metadir [v5.5 09/10]
Actually enable this very large feature, which adds metadata directory
trees, allocation groups on the realtime volume, persistent quota
options, and quota for realtime files.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into staging-merge
xfs: enable quota for realtime volumes [v5.5 08/10]
At some point, I realized that I've refactored enough of the quota code
in XFS that I should evaluate whether or not quota actually works on
realtime volumes. It turns out that it nearly works: the only broken
pieces are chown and delayed allocation, and reporting of project
quotas in the statvfs output for projinherit+rtinherit directories.
Fix these things and we can have realtime quotas again after 20 years.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into staging-merge
xfs: persist quota options with metadir [v5.5 07/10]
Store the quota files in the metadata directory tree instead of the
superblock. Since we're introducing a new incompat feature flag, let's
also make the mount process bring up quotas in whatever state they were
when the filesystem was last unmounted, instead of requiring sysadmins
to remember that themselves.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Remove unnecessary CONFIG_NUMA #ifdef around numa_add_cpu() since the
function is already properly handled in <asm/numa.h> for both NUMA and
non-NUMA configurations. For !CONFIG_NUMA builds, numa_add_cpu() is
defined as an empty function.
Simplify the code without any functionality change.
Testing: Build CONFIG_NUMA=n
Signed-off-by: Shivank Garg <shivankg@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241112072346.428623-1-shivankg@amd.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into staging-merge
xfs: shard the realtime section [v5.5 06/10]
Right now, the realtime section uses a single pair of metadata inodes to
store the free space information. This presents a scalability problem
since every thread trying to allocate or free rt extents have to lock
these files. Solve this problem by sharding the realtime section into
separate realtime allocation groups.
While we're at it, define a superblock to be stamped into the start of
the rt section. This enables utilities such as blkid to identify block
devices containing realtime sections, and avoids the situation where
anything written into block 0 of the realtime extent can be
misinterpreted as file data.
The best advantage for rtgroups will become evident later when we get to
adding rmap and reflink to the realtime volume, since the geometry
constraints are the same for rt groups and AGs. Hence we can reuse all
that code directly.
This is a very large patchset, but it catches us up with 20 years of
technical debt that have accumulated.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into staging-merge
xfs: preparation for realtime allocation groups [v5.5 05/10]
Prepare for realtime groups by adding a few bug fixes and generic code
that will be necessary.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into staging-merge
xfs: create incore rt allocation groups [v5.5 04/10]
Add in-memory data structures for sharding the realtime volume into
independent allocation groups. For existing filesystems, the entire rt
volume is modelled as having a single large group, with (potentially) a
number of rt extents exceeding 2^32 blocks, though these are not likely
to exist because the codebase has been a bit broken for decades. The
next series fills in the ondisk format and other supporting structures.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into staging-merge
xfs: metadata inode directory trees [v5.5 03/10]
This series delivers a new feature -- metadata inode directories. This
is a separate directory tree (rooted in the superblock) that contains
only inodes that contain filesystem metadata. Different metadata
objects can be looked up with regular paths.
Start by creating xfs_imeta{dir,file}* functions to mediate access to
the metadata directory tree. By the end of this mega series, all
existing metadata inodes (rt+quota) will use this directory tree instead
of the superblock.
Next, define the metadir on-disk format, which consists of marking
inodes with a new iflag that says they're metadata. This prevents
bulkstat and friends from ever getting their hands on fs metadata files.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into staging-merge
xfs: create a generic allocation group structure [v5.5 02/10]
Soon we'll be sharding the realtime volume into separate allocation
groups. These rt groups will /mostly/ behave the same as the ones on
the data device, but since rt groups don't have quite the same set of
struct fields as perags, let's hoist the parts that will be shared by
both into a common xfs_group object.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into staging-merge
xfs: convert perag to use xarrays [v5.5 01/10]
Convert the xfs_mount perag tree to use an xarray instead of a radix
tree. There should be no functional changes here.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Replace throttle_thermal_policy_switch_next() with
platform_profile_cycle() to reduce code duplication and avoid a
potential race condition with the platform profile handler.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107003811.615574-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When changing the thermal policy using the platform profile API,
a Vivobook thermal policy is stored in throttle_thermal_policy_mode.
However everywhere else a normal thermal policy is stored inside this
variable, potentially confusing the platform profile.
Fix this by always storing normal thermal policy values inside
throttle_thermal_policy_mode and only do the conversion when writing
the thermal policy to hardware. This also fixes the order in which
throttle_thermal_policy_switch_next() steps through the thermal modes
on Vivobook machines.
Tested-by: Casey G Bowman <casey.g.bowman@intel.com>
Fixes: bcbfcebda2cb ("platform/x86: asus-wmi: add support for vivobook fan profiles")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107003811.615574-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The if statement performs the same action if the strcmp result is
true or false since there is identical code on both branches. The
if statement is redundant and can be replaced with just one call
to sysfs_remove_group.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107113543.17137-1-colin.i.king@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Sumesh K Naduvalath doesn't work for Intel anymore. Adding myself as
maintainer as this is related to Intel Integrated Sensor Hub, which I
maintain.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20241111185456.331071-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It was found that unloading 'hid_hyperv' module results in a devres
complaint:
...
hv_vmbus: unregistering driver hid_hyperv
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0
...
Call Trace:
<TASK>
? devres_release_group+0x1f2/0x2c0
? __warn+0xd1/0x1c0
? devres_release_group+0x1f2/0x2c0
? report_bug+0x32a/0x3c0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? devres_release_group+0x1f2/0x2c0
? devres_release_group+0x90/0x2c0
? rcu_is_watching+0x15/0xb0
? __pfx_devres_release_group+0x10/0x10
hid_device_remove+0xf5/0x220
device_release_driver_internal+0x371/0x540
? klist_put+0xf3/0x170
bus_remove_device+0x1f1/0x3f0
device_del+0x33f/0x8c0
? __pfx_device_del+0x10/0x10
? cleanup_srcu_struct+0x337/0x500
hid_destroy_device+0xc8/0x130
mousevsc_remove+0xd2/0x1d0 [hid_hyperv]
device_release_driver_internal+0x371/0x540
driver_detach+0xc5/0x180
bus_remove_driver+0x11e/0x2a0
? __mutex_unlock_slowpath+0x160/0x5e0
vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus]
...
And the issue seems to be that the corresponding devres group is not
allocated. Normally, devres_open_group() is called from
__hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver'
with 'mousevsc_hid_driver' stub and basically re-implements
__hid_device_probe() by calling hid_parse() and hid_hw_start() but not
devres_open_group(). hid_device_probe() does not call __hid_device_probe()
for it. Later, when the driver is removed, hid_device_remove() calls
devres_release_group() as it doesn't check whether hdev->driver was
initially overridden or not.
The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure
timely release of driver-allocated resources") but the commit itself seems
to be correct.
Fix the issue by dropping the 'hid_dev->driver' override and using
hid_register_driver()/hid_unregister_driver() instead. Alternatively, it
would have been possible to rely on the default handling but
HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work
for mousevsc as-is.
Fixes: 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources")
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Grab the intel_display from 'encoder' rather than 'state'
in the encoder hooks to avoid the massive footgun that is
intel_sanitize_encoder(), which passes NULL as the 'state'
argument to encoder .disable() and .post_disable().
TODO: figure out how to actually fix intel_sanitize_encoder()...
Fixes: ab0b0eb5c85c ("drm/i915/tv: convert to struct intel_display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107161123.16269-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit dc3806d9eb66d0105f8d55d462d4ef681d9eac59)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
This runs on extents that haven't yet been validated, so we don't want
to assert that we have a valid entry type.
Reported-by: syzbot+4f29c3f12f864d8a8d17@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the jset_entry_dev_usage is malformed, and too small, our nr_entries
calculation will be incorrect - just bail out.
Reported-by: syzbot+05d7520be047c9be86e0@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Use the mem_is_zero() helper where possible.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20241110201706.16614-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Native IPI is used for AP booting, because it is the booting interface
between OS and BIOS firmware. The paravirt IPI is only used inside OS,
and native IPI is necessary to boot AP.
When booting AP, we write the kernel entry address in the HW mailbox of
AP and send IPI interrupt to it. AP executes idle instruction and waits
for interrupts or SW events, then clears IPI interrupt and jumps to the
kernel entry from HW mailbox.
Between writing HW mailbox and sending IPI, AP can be woken up by SW
events and jumps to the kernel entry, so ACTION_BOOT_CPU IPI interrupt
will keep pending during AP booting. And native IPI interrupt handler
needs be registered so that it can clear pending native IPI, else there
will be endless interrupts during AP booting stage.
Here native IPI interrupt is initialized even if paravirt IPI is used.
Cc: stable@vger.kernel.org
Fixes: 74c16b2e2b0c ("LoongArch: KVM: Add PV IPI support on guest side")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, the kernel couldn't boot when ARCH_IOREMAP, ARCH_WRITECOMBINE
and KASAN are enabled together. Because DMW2 is used by kernel now which
is configured as 0xa000000000000000 for WriteCombine, but KASAN has no
segment mapping for it. This patch fix this issue.
Solution: Add the relevant definitions for WriteCombine (DMW2) in KASAN.
Cc: stable@vger.kernel.org
Fixes: 8e02c3b782ec ("LoongArch: Add writecombine support for DMW-based ioremap()")
Signed-off-by: Kanglong Wang <wangkanglong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
If PGDIR_SIZE is too large for cpu_vabits, KASAN_SHADOW_END will
overflow UINTPTR_MAX because KASAN_SHADOW_START/KASAN_SHADOW_END are
aligned up by PGDIR_SIZE. And then the overflowed KASAN_SHADOW_END looks
like a user space address.
For example, PGDIR_SIZE of CONFIG_4KB_4LEVEL is 2^39, which is too large
for Loongson-2K series whose cpu_vabits = 39.
Since CONFIG_4KB_4LEVEL is completely legal for CPUs with cpu_vabits <=
39, we just disable KASAN via early return in kasan_init(). Otherwise we
get a boot failure.
Moreover, we change KASAN_SHADOW_END from the first address after KASAN
shadow area to the last address in KASAN shadow area, in order to avoid
the end address exactly overflow to 0 (which is a legal case). We don't
need to worry about alignment because pgd_addr_end() can handle it.
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Make KASAN work with 5-level page-tables, including:
1. Implement and use __pgd_none() and kasan_p4d_offset().
2. As done in kasan_pmd_populate() and kasan_pte_populate(), restrict
the loop conditions of kasan_p4d_populate() and kasan_pud_populate()
to avoid unnecessary population.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is a trivial cleanup, commit c62da0c35d58518d ("mm/vma: define a
default value for VM_DATA_DEFAULT_FLAGS") has unified default values of
VM_DATA_DEFAULT_FLAGS across different platforms.
Apply the same consistency to LoongArch.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
early_numa_add_cpu() applies on physical CPU id rather than logical CPU
id, so use cpuid instead of cpu.
Cc: stable@vger.kernel.org
Fixes: 3de9c42d02a79a5 ("LoongArch: Add all CPUs enabled by fdt to NUMA node 0")
Reported-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In order to support ACPI-based physical CPU hotplug, we suppose for all
"possible" CPUs cpu_logical_map() can work. Because some drivers want to
use cpu_logical_map() for all "possible" CPUs, while currently we only
setup logical-physical mapping for "present" CPUs. This lack of mapping
also causes cpu_to_node() cannot work for hot-added CPUs.
All "possible" CPUs are listed in MADT, and the "present" subset is
marked as ACPI_MADT_ENABLED. To setup logical-physical CPU mapping for
all possible CPUs and keep present CPUs continuous in cpu_present_mask,
we parse MADT twice. The first pass handles CPUs with ACPI_MADT_ENABLED
and the second pass handles CPUs without ACPI_MADT_ENABLED.
The global flag (cpu_enumerated) is removed because acpi_map_cpu() calls
cpu_number_map() rather than set_processor_mask() now.
Reported-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
