summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-11-14Bluetooth: ISO: Update hci_conn_hash_lookup_big for Broadcast slaveIulia Tanasescu
Currently, hci_conn_hash_lookup_big only checks for BIS master connections, by filtering out connections with the destination address set. This commit updates this function to also consider BIS slave connections, since it is also used for a Broadcast Receiver to set an available BIG handle before issuing the LE BIG Create Sync command. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pendingIulia Tanasescu
The Bluetooth Core spec does not allow a LE BIG Create sync command to be sent to Controller if another one is pending (Vol 4, Part E, page 2586). In order to avoid this issue, the HCI_CONN_CREATE_BIG_SYNC was added to mark that the LE BIG Create Sync command has been sent for a hcon. Once the BIG Sync Established event is received, the hcon flag is erased and the next pending hcon is handled. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: ISO: Fix matching parent socket for BIS slaveIulia Tanasescu
Currently, when a BIS slave connection is notified to the ISO layer, the parent socket is tried to be matched by the HCI_EVT_LE_BIG_SYNC_ESTABILISHED event. However, a BIS slave connection is notified to the ISO layer after the Command Complete for the LE Setup ISO Data Path command is received. This causes the parent to be incorrectly matched if multiple listen sockets are present. This commit adds a fix by matching the parent based on the BIG handle set in the notified connection. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pendingIulia Tanasescu
The Bluetooth Core spec does not allow a LE PA Create sync command to be sent to Controller if another one is pending (Vol 4, Part E, page 2493). In order to avoid this issue, the HCI_CONN_CREATE_PA_SYNC was added to mark that the LE PA Create Sync command has been sent for a hcon. Once the PA Sync Established event is received, the hcon flag is erased and the next pending hcon is handled. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 sHilda Wu
The original timeout setting for HCI Reset on shutdown is 10 seconds. HCI Reset shouldn't take 10 seconds to complete so instead use the default timeout for commands. Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name()Javier Carrasco
of_find_node_by_path() returns a pointer to a device_node with its refcount incremented, and a call to of_node_put() is required to decrement the refcount again and avoid leaking the resource. If 'of_property_read_string_index(root, "compatible", 0, &tmp)' fails, the function returns without calling of_node_put(root) before doing so. The automatic cleanup attribute can be used by means of the __free() macro to automatically call of_node_put() when the variable goes out of scope, fixing the issue and also accounting for new error paths. Fixes: 63fac3343b99 ("Bluetooth: btbcm: Support per-board firmware variants") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925Hao Qin
Add VID 0489 & PID e111 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e111 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Hao Qin <hao.qin@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btmtk: adjust the position to init iso data anchorChris Lu
MediaTek iso data anchor init should be moved to where MediaTek claims iso data interface. If there is an unexpected BT usb disconnect during setup flow, it will cause a NULL pointer crash issue when releasing iso anchor since the anchor wasn't been init yet. Adjust the position to do iso data anchor init. [ 17.137991] pc : usb_kill_anchored_urbs+0x60/0x168 [ 17.137998] lr : usb_kill_anchored_urbs+0x44/0x168 [ 17.137999] sp : ffffffc0890cb5f0 [ 17.138000] x29: ffffffc0890cb5f0 x28: ffffff80bb6c2e80 [ 17.144081] gpio gpiochip0: registered chardev handle for 1 lines [ 17.148421] x27: 0000000000000000 [ 17.148422] x26: ffffffd301ff4298 x25: 0000000000000003 x24: 00000000000000f0 [ 17.148424] x23: 0000000000000000 x22: 00000000ffffffff x21: 0000000000000001 [ 17.148425] x20: ffffffffffffffd8 x19: ffffff80c0f25560 x18: 0000000000000000 [ 17.148427] x17: ffffffd33864e408 x16: ffffffd33808f7c8 x15: 0000000000200000 [ 17.232789] x14: e0cd73cf80ffffff x13: 50f2137c0a0338c9 x12: 0000000000000001 [ 17.239912] x11: 0000000080150011 x10: 0000000000000002 x9 : 0000000000000001 [ 17.247035] x8 : 0000000000000000 x7 : 0000000000008080 x6 : 8080000000000000 [ 17.254158] x5 : ffffffd33808ebc0 x4 : fffffffe033dcf20 x3 : 0000000080150011 [ 17.261281] x2 : ffffff8087a91400 x1 : 0000000000000000 x0 : ffffff80c0f25588 [ 17.268404] Call trace: [ 17.270841] usb_kill_anchored_urbs+0x60/0x168 [ 17.275274] btusb_mtk_release_iso_intf+0x2c/0xd8 [btusb (HASH:5afe 6)] [ 17.284226] btusb_mtk_disconnect+0x14/0x28 [btusb (HASH:5afe 6)] [ 17.292652] btusb_disconnect+0x70/0x140 [btusb (HASH:5afe 6)] [ 17.300818] usb_unbind_interface+0xc4/0x240 [ 17.305079] device_release_driver_internal+0x18c/0x258 [ 17.310296] device_release_driver+0x1c/0x30 [ 17.314557] bus_remove_device+0x140/0x160 [ 17.318643] device_del+0x1c0/0x330 [ 17.322121] usb_disable_device+0x80/0x180 [ 17.326207] usb_disconnect+0xec/0x300 [ 17.329948] hub_quiesce+0x80/0xd0 [ 17.333339] hub_disconnect+0x44/0x190 [ 17.337078] usb_unbind_interface+0xc4/0x240 [ 17.341337] device_release_driver_internal+0x18c/0x258 [ 17.346551] device_release_driver+0x1c/0x30 [ 17.350810] usb_driver_release_interface+0x70/0x88 [ 17.355677] proc_ioctl+0x13c/0x228 [ 17.359157] proc_ioctl_default+0x50/0x80 [ 17.363155] usbdev_ioctl+0x830/0xd08 [ 17.366808] __arm64_sys_ioctl+0x94/0xd0 [ 17.370723] invoke_syscall+0x6c/0xf8 [ 17.374377] el0_svc_common+0x84/0xe0 [ 17.378030] do_el0_svc+0x20/0x30 [ 17.381334] el0_svc+0x34/0x60 [ 17.384382] el0t_64_sync_handler+0x88/0xf0 [ 17.388554] el0t_64_sync+0x180/0x188 [ 17.392208] Code: f9400677 f100a2f4 54fffea0 d503201f (b8350288) [ 17.398289] ---[ end trace 0000000000000000 ]--- Fixes: ceac1cb0259d ("Bluetooth: btusb: mediatek: add ISO data transmission functions") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel_pcie: Replace deprecated PCI functionsPhilipp Stanner
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()"). Replace these functions with pcim_iomap_region(). Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: Set quirks for ATS2851Danil Pylaev
This adds quirks for broken ats2851 features. Signed-off-by: Danil Pylaev <danstiv404@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: Support new quirks for ATS2851Danil Pylaev
This adds support for quirks for broken extended create connection, and write auth payload timeout. Signed-off-by: Danil Pylaev <danstiv404@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: Add new quirks for ATS2851Danil Pylaev
This adds quirks for broken extended create connection, and write auth payload timeout. Signed-off-by: Danil Pylaev <danstiv404@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14clk: amlogic: axg-audio: fix Kconfig dependency on RESET_MESON_AUXArnd Bergmann
As in most cases, using 'imply' is wrong here and does not prevent build failures since that code may not be visible to a built-in clk driver: axg-audio.c:(.text+0x15c): undefined reference to `devm_meson_rst_aux_register' Replace the incorrt 'imply' with the necessary 'depends on'. Fixes: 664988eb47dd ("clk: amlogic: axg-audio: use the auxiliary reset driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241111102932.3209861-1-arnd@kernel.org Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-11-14Bluetooth: btintel_pcie: remove redundant assignment to variable retColin Ian King
The variable ret is being assigned -ENOMEM however this is never read and it is being re-assigned a new value when the code jumps to label resubmit. The assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}()Andrej Shadura
Commit 9bf4e919ccad worked around an issue introduced after an innocuous optimisation change in LLVM main: > len is defined as an 'int' because it is assigned from > '__user int *optlen'. However, it is clamped against the result of > sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit > platforms). This is done with min_t() because min() requires compatible > types, which results in both len and the result of sizeof() being casted > to 'unsigned int', meaning len changes signs and the result of sizeof() > is truncated. From there, len is passed to copy_to_user(), which has a > third parameter type of 'unsigned long', so it is widened and changes > signs again. This excessive casting in combination with the KCSAN > instrumentation causes LLVM to fail to eliminate the __bad_copy_from() > call, failing the build. The same issue occurs in rfcomm in functions rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old. Change the type of len to size_t in both rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old and replace min_t() with min(). Cc: stable@vger.kernel.org Co-authored-by: Aleksei Vetrov <vvvvvv@google.com> Improves: 9bf4e919ccad ("Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()") Link: https://github.com/ClangBuiltLinux/linux/issues/2007 Link: https://github.com/llvm/llvm-project/issues/85647 Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel: Do no pass vendor events to stackKiran K
During firmware download, vendor specific events like boot up and secure send result are generated. These events can be safely processed at the driver level. Passing on these events to stack prints unnecessary log as below. Bluetooth: hci0: Malformed MSFT vendor event: 0x02 Fixes: 3368aa357f3b ("Bluetooth: msft: Handle MSFT Monitor Device Event") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel_pcie: Remove deadcodeEverest K.C.
The switch case statement has a default branch. Thus, the return statement at the end of the function can never be reached. Fix it by removing the return statement at the end of the function. This issue was reported by Coverity Scan. Signed-off-by: Everest K.C. <everestkc@everestkc.com.np> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_qca: use devm_clk_get_optional_enabled_with_rate()Bartosz Golaszewski
Use the new devm_clk_get_optional_enabled_with_rate() clock helper to shrink the code a bit. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel: Add DSBR support for BlazarIW, BlazarU and GaPKiran K
Add DSBR support for BlazarIW, BlazarU and Gale Peak2 cores. Refer commit eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive strength of BRI") for details about DSBR. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btmtksdio: Lookup device node only as fallbackChen-Yu Tsai
If the device tree is properly written, the SDIO function device node should be correctly defined, and the mmc core in Linux should correctly tie it to the device being probed. Only fall back to searching for the device node by compatible if the original device node tied to the device is incorrect, as seen in older device trees. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14clk: clk-apple-nco: Add NULL check in applnco_probeCharles Han
Add NULL check in applnco_probe, to handle kernel NULL pointer dereference error. Fixes: 6641057d5dba ("clk: clk-apple-nco: Add driver for Apple NCO") Signed-off-by: Charles Han <hanchunchao@inspur.com> Link: https://lore.kernel.org/r/20241114072820.3071-1-hanchunchao@inspur.com Reviewed-by: Martin Povišer <povik+lin@cutebit.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-11-14Bluetooth: btintel_pcie: Add recovery mechanismKiran K
This patch adds a recovery mechanism to recover controller if firmware download fails due to unresponsive controller, command timeout, firmware signature verification failure etc. Driver attmepts maximum of 5 times before giving up. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel_pcie: Add handshake between driver and firmwareKiran K
The following handshake mechanism needs be followed after firmware download is completed to bring the firmware to running state. After firmware fragments of Operational image are downloaded and secure sends result of the image succeeds, 1. Driver sends HCI Intel reset with boot option #1 to switch FW image. 2. FW sends Alive GP[0] MSIx 3. Driver enables data path (doorbell 0x460 for RBDs, etc...) 4. Driver gets Bootup event from firmware 5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0) 6. FW sends Alive GP[0] MSIx 7. Device host interface is fully set for BT protocol stack operation. 8. Driver may optionally get debug event with ID 0x97 which can be dropped For Intermediate loadger image, all the above steps are applicable expcept #5 and #6. On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait for it before passing control over to bluetooth stack. Co-developed-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_core: Fix not checking skb length on hci_scodata_packetLuiz Augusto von Dentz
This fixes not checking if skb really contains an SCO header otherwise the code may attempt to access some uninitilized/invalid memory past the valid skb->data. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packetLuiz Augusto von Dentz
This fixes not checking if skb really contains an ACL header otherwise the code may attempt to access some uninitilized/invalid memory past the valid skb->data. Reported-by: syzbot+6ea290ba76d8c1eb1ac2@syzkaller.appspotmail.com Tested-by: syzbot+6ea290ba76d8c1eb1ac2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6ea290ba76d8c1eb1ac2 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btnxpuart: Add GPIO support to power save featureNeeraj Sanjay Kale
This adds support for driving the chip into sleep or wakeup with a GPIO. If the device tree property device-wakeup-gpios is defined, the driver utilizes this GPIO for controlling the chip's power save state, else it uses the default UART-break method. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14dt-bindings: net: bluetooth: nxp: Add support for power save feature using GPIONeeraj Sanjay Kale
This adds a new optional device tree property device-wakeup-gpios, which specifies the GPIO connected to BT_WAKE_IN pin of the NXP chipset. If this property is defined, the driver will use this GPIO for driving chip into sleep/wakeup state, else use the UART break signal by default. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_conn: Use disable_delayed_work_syncLuiz Augusto von Dentz
This makes use of disable_delayed_work_sync instead cancel_delayed_work_sync as it not only cancel the ongoing work but also disables new submit which is disarable since the object holding the work is about to be freed. Reported-by: syzbot+2446dd3cb07277388db6@syzkaller.appspotmail.com Tested-by: syzbot+2446dd3cb07277388db6@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2446dd3cb07277388db6 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: Add USB HW IDs for MT7920/MT7925Jiande Lu
Add HW IDs for wireless module. These HW IDs are extracted from Windows driver inf file and the test for card bring up successful. MT7920 HW IDs test with below patch. https://patchwork.kernel.org/project/bluetooth/ patch/20240930081257.23975-1-chris.lu@mediatek.com/ Patch has been tested successfully and controller is recognized devices pair successfully. MT7920 module bring up message as below. Bluetooth: Core ver 2.22 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20240930111457 Bluetooth: hci0: Device setup in 143004 usecs Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. Bluetooth: hci0: AOSP extensions version v1.00 Bluetooth: hci0: AOSP quality report is supported Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: MGMT ver 1.22 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 MT7925 module bring up message as below. Bluetooth: Core ver 2.22 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202 Bluetooth: hci0: Device setup in 286558 usecs Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. Bluetooth: hci0: AOSP extensions version v1.00 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: MGMT ver 1.22 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: Add RTL8852BE device 0489:e123 to device tablesHilda Wu
Add the support ID 0489:e123 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e123 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14bluetooth: Fix typos in the commentsYan Zhen
Correctly spelled comments make it easier for the reader to understand the code. Fix typos: 'fragement' ==> 'fragment', 'genration' ==> 'generation', 'funciton' ==> 'function', 'Explitly' ==> 'Explicitly', 'explaination' ==> 'explanation', 'Tranlate' ==> 'Translate', 'immediatelly' ==> 'immediately', 'isntance' ==> 'instance', 'transmittion' ==> 'transmission', 'recevie' ==> 'receive', 'outselves' ==> 'ourselves', 'conrol' ==> 'control'. Signed-off-by: Yan Zhen <yanzhen@vivo.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_conn: Reduce hci_conn_drop() calls in two functionsMarkus Elfring
An hci_conn_drop() call was immediately used after a null pointer check for an hci_conn_link() call in two function implementations. Thus call such a function only once instead directly before the checks. This issue was transformed by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btnxpuart: Rename IW615 to IW610Neeraj Sanjay Kale
This changes the chip name of IW615 to IW610. IW610 (formerly called IW615) is yet to be released to broad market, hence there is no issue of backward compatibility. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btnxpuart: Drop _v0 suffix from FW namesNeeraj Sanjay Kale
This updates all FW names by dropping the _v0 suffix. Its been decided that all NXP BT/ WiFi FW names won't support _v0 suffix. The suffix would be kept for next HW versions such as v1, v2 and so on, which do not have backward compatible FW. This change affects W8987, IW416 and IW615 chipsets, out of which new FW files for W8987 and IW615 are yet to be released to broad market. For IW416, old and new FW names are added to maintain backward compatibility for existing customers. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14dt-bindings: clock: actions,owl-cmu: convert to YAMLIvaylo Ivanov
Convert the Actions Semi Owl CMU bindings to DT schema. Changes during conversion: - Since all Actions Semi Owl SoCs utilize the internal low frequency oscillator as a parent for some clocks, require it. Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20241114072601.265011-1-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-11-14Bluetooth: btusb: Add one more ID 0x13d3:0x3623 for Qualcomm WCN785xZijun Hu
Add one more part with ID (0x13d3, 0x3623) to usb_device_id table for Qualcomm WCN785x, and its device info from /sys/kernel/debug/usb/devices is shown below: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3623 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: Add one more ID 0x0489:0xe0f3 for Qualcomm WCN785xZijun Hu
Add one more part with ID (0x0489, 0xe0f3) to usb_device_id table for Qualcomm WCN785x, and its device info from /sys/kernel/debug/usb/devices is shown below: T: Bus=01 Lev=01 Prnt=01 Port=13 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f3 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: add Foxconn 0xe0fc for Qualcomm WCN785xAaron Ma
Firmwares are already in upstream. kernel boot log as following: Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00190200.bin Bluetooth: hci0: QCA: patch rome 0x190200 build 0x5656, firmware rome 0x190200 build 0x43fb Bluetooth: hci0: using NVM file: qca/nvm_usb_00190200.bin Paired BT headphone, output is good. T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0fc Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: mediatek: change the conditions for ISO interfaceChris Lu
Change conditions for Bluetooth driver claiming and releasing usb ISO interface for MediaTek ISO data transmission. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: mediatek: add intf release flow when usb disconnectChris Lu
MediaTek claim an special usb intr interface for ISO data transmission. The interface need to be released before unregistering hci device when usb disconnect. Removing BT usb dongle without properly releasing the interface may cause Kernel panic while unregister hci device. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: mediatek: add callback function in btusb_disconnectChris Lu
Add disconnect callback function in btusb_disconnect which is reserved for vendor specific usage before deregister hci in btusb_disconnect. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14dt-bindings: clock: ti: Convert mux.txt to json-schemaAndreas Kemnade
Convert the OMAP mux clock device tree binding to json-schema. Specify the creator of the original binding as a maintainer. Choose GPL-only license because original binding was also GPL. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241112162618.400194-1-andreas@kemnade.info Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-11-14Bluetooth: btusb: mediatek: move Bluetooth power off command positionChris Lu
Move MediaTek Bluetooth power off command before releasing usb ISO interface. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-15Merge tag 'drm-intel-fixes-2024-11-14' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - Don't load GSC on ARL-H and ARL-U if too old FW - Avoid potential OOPS in enabling/disabling TV output Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZzWksU6CMGLPfjkT@jlahtine-mobl.ger.corp.intel.com
2024-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc8). Conflicts: tools/testing/selftests/net/.gitignore 252e01e68241 ("selftests: net: add netlink-dumps to .gitignore") be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw") https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/ drivers/net/phy/phylink.c 671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled") 7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"") Adjacent changes: drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines") e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14sched_ext: ops.cpu_acquire() should be called with SCX_KF_RESTTejun Heo
ops.cpu_acquire() is currently called with 0 kf_maks which is interpreted as SCX_KF_UNLOCKED which allows all unlocked kfuncs, but ops.cpu_acquire() is called from balance_one() under the rq lock and should only be allowed call kfuncs that are safe under the rq lock. Update it to use SCX_KF_REST. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Vernet <void@manifault.com> Cc: Zhao Mengmeng <zhaomzhao@126.com> Link: http://lkml.kernel.org/r/ZzYvf2L3rlmjuKzh@slm.duckdns.org Fixes: 245254f7081d ("sched_ext: Implement sched_ext_ops.cpu_acquire/release()")
2024-11-14cgroup/cpuset: Disable cpuset_cpumask_can_shrink() test if not load balancingWaiman Long
With some recent proposed changes [1] in the deadline server code, it has caused a test failure in test_cpuset_prs.sh when a change is being made to an isolated partition. This is due to failing the cpuset_cpumask_can_shrink() check for SCHED_DEADLINE tasks at validate_change(). This is actually a false positive as the failed test case involves an isolated partition with load balancing disabled. The deadline check is not meaningful in this case and the users should know what they are doing. Fix this by doing the cpuset_cpumask_can_shrink() check only when loading balanced is enabled. Also change its arguments to use effective_cpus for the current cpuset and user_xcpus() as an approiximation for the target effective_cpus as the real effective_cpus hasn't been fully computed yet as this early stage. As the check isn't comprehensive, there may be false positives or negatives. We may have to revise the code to do a more thorough check in the future if this becomes a concern. [1] https://lore.kernel.org/lkml/82be06c1-6d6d-4651-86c9-bcc828cbcb80@redhat.com/T/#t Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2024-11-14KVM: x86: switch hugepage recovery thread to vhost_taskPaolo Bonzini
kvm_vm_create_worker_thread() is meant to be used for kthreads that can consume significant amounts of CPU time on behalf of a VM or in response to how the VM behaves (for example how it accesses its memory). Therefore it wants to charge the CPU time consumed by that work to the VM's container. However, because of these threads, cgroups which have kvm instances inside never complete freezing. This can be trivially reproduced: root@test ~# mkdir /sys/fs/cgroup/test root@test ~# echo $$ > /sys/fs/cgroup/test/cgroup.procs root@test ~# qemu-system-x86_64 -nographic -enable-kvm and in another terminal: root@test ~# echo 1 > /sys/fs/cgroup/test/cgroup.freeze root@test ~# cat /sys/fs/cgroup/test/cgroup.events populated 1 frozen 0 The cgroup freezing happens in the signal delivery path but kvm_nx_huge_page_recovery_worker, while joining non-root cgroups, never calls into the signal delivery path and thus never gets frozen. Because the cgroup freezer determines whether a given cgroup is frozen by comparing the number of frozen threads to the total number of threads in the cgroup, the cgroup never becomes frozen and users waiting for the state transition may hang indefinitely. Since the worker kthread is tied to a user process, it's better if it behaves similarly to user tasks as much as possible, including being able to send SIGSTOP and SIGCONT. In fact, vhost_task is all that kvm_vm_create_worker_thread() wanted to be and more: not only it inherits the userspace process's cgroups, it has other niceties like being parented properly in the process tree. Use it instead of the homegrown alternative. Incidentally, the new code is also better behaved when you flip recovery back and forth to disabled and back to enabled. If your recovery period is 1 minute, it will run the next recovery after 1 minute independent of how many times you flipped the parameter. (Commit message based on emails from Tejun). Reported-by: Tejun Heo <tj@kernel.org> Reported-by: Luca Boccassi <bluca@debian.org> Acked-by: Tejun Heo <tj@kernel.org> Tested-by: Luca Boccassi <bluca@debian.org> Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-11-14Merge tag 'net-6.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth. Quite calm week. No new regression under investigation. Current release - regressions: - eth: revert "igb: Disable threaded IRQ for igb_msix_other" Current release - new code bugs: - bluetooth: btintel: direct exception event to bluetooth stack Previous releases - regressions: - core: fix data-races around sk->sk_forward_alloc - netlink: terminate outstanding dump on socket close - mptcp: error out earlier on disconnect - vsock: fix accept_queue memory leak - phylink: ensure PHY momentary link-fails are handled - eth: mlx5: - fix null-ptr-deref in add rule err flow - lock FTE when checking if active - eth: dwmac-mediatek: fix inverted handling of mediatek,mac-wol Previous releases - always broken: - sched: fix u32's systematic failure to free IDR entries for hnodes. - sctp: fix possible UAF in sctp_v6_available() - eth: bonding: add ns target multicast address to slave device - eth: mlx5: fix msix vectors to respect platform limit - eth: icssg-prueth: fix 1 PPS sync" * tag 'net-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits) net: sched: u32: Add test case for systematic hnode IDR leaks selftests: bonding: add ns multicast group testing bonding: add ns target multicast address to slave device net: ti: icssg-prueth: Fix 1 PPS sync stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines net: Make copy_safe_from_sockptr() match documentation net: stmmac: dwmac-mediatek: Fix inverted handling of mediatek,mac-wol ipmr: Fix access to mfc_cache_list without lock held samples: pktgen: correct dev to DEV net: phylink: ensure PHY momentary link-fails are handled mptcp: pm: use _rcu variant under rcu_read_lock mptcp: hold pm lock when deleting entry mptcp: update local address flags when setting it net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes. MAINTAINERS: Re-add cancelled Renesas driver sections Revert "igb: Disable threaded IRQ for igb_msix_other" Bluetooth: btintel: Direct exception event to bluetooth stack Bluetooth: hci_core: Fix calling mgmt_device_connected virtio/vsock: Improve MSG_ZEROCOPY error handling vsock: Fix sk_error_queue memory leak ...
2024-11-14Merge tag 'bcachefs-2024-11-13' of git://evilpiepirate.org/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: "This fixes one minor regression from the btree cache fixes (in the scan_for_btree_nodes repair path) - and the shutdown path fix is the big one here, in terms of bugs closed: - Assorted tiny syzbot fixes - Shutdown path fix: "bch2_btree_write_buffer_flush_going_ro()" The shutdown path wasn't flushing the btree write buffer, leading to shutting down while we still had operations in flight. This fixes a whole slew of syzbot bugs, and undoubtedly other strange heisenbugs. * tag 'bcachefs-2024-11-13' of git://evilpiepirate.org/bcachefs: bcachefs: Fix assertion pop in bch2_ptr_swab() bcachefs: Fix journal_entry_dev_usage_to_text() overrun bcachefs: Allow for unknown key types in backpointers fsck bcachefs: Fix assertion pop in topology repair bcachefs: Fix hidden btree errors when reading roots bcachefs: Fix validate_bset() repair path bcachefs: Fix missing validation for bch_backpointer.level bcachefs: Fix bch_member.btree_bitmap_shift validation bcachefs: bch2_btree_write_buffer_flush_going_ro()
generated by cgit (git 2.34.1) at 2025-09-13 22:28:28 +0000