summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-08-31drm/amdgpu: Hide xcp partition sysfs under SRIOVRajneesh Bhardwaj
XCP partitions should not be visible for the VF for GFXIP 9.4.3. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: use read-modify-write mode for gfx v9_4_3 SQ settingTao Zhou
Instead of using direct update, avoid touching unrelated fields. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdkfd: use mask to get v9 interrupt sq data bits correctlyAlex Sierra
Interrupt sq data bits were not taken properly from contextid0 and contextid1. Use macro KFD_CONTEXT_ID_GET_SQ_INT_DATA instead. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Allocate coredump memory in a nonblocking wayAndré Almeida
During a GPU reset, a normal memory reclaim could block to reclaim memory. Giving that coredump is a best effort mechanism, it shouldn't disturb the reset path. Change its memory allocation flag to a nonblocking one. Signed-off-by: André Almeida <andrealmeid@igalia.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Support query ecc cap for aqua_vanjaramHawking Zhang
Driver queries umc_info v4_0 to identify ecc cap for aqua_vanjaram Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Candice Li <candice.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Add umc_info v4_0 structureHawking Zhang
To be used by aqua_vanjaram Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Candice Li <candice.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: always switch off ODM before committing more streamsWenjing Liu
ODM power optimization is only supported with single stream. When ODM power optimization is enabled, we might not have enough free pipes for enabling other stream. So when we are committing more than 1 stream we should first switch off ODM power optimization to make room for new stream and then allocating pipe resource for the new stream. Cc: stable@vger.kernel.org Fixes: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: Remove wait while lockedGabe Teeger
[Why] We wait for mpc idle while in a locked state, leading to potential deadlock. [What] Move the wait_for_idle call to outside of HW lock. This and a call to wait_drr_doublebuffer_pending_clear are moved added to a new static helper function called wait_for_outstanding_hw_updates, to make the interface clearer. Cc: stable@vger.kernel.org Fixes: 8f0d304d21b3 ("drm/amd/display: Do not commit pipe when updating DRR") Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: update blank state on ODM changesWenjing Liu
When we are dynamically adding new ODM slices, we didn't update blank state, if the pipe used by new ODM slice is previously blanked, we will continue outputting blank pixel data on that slice causing right half of the screen showing blank image. The previous fix was a temporary hack to directly update current state when committing new state. This could potentially cause hw and sw state synchronization issues and it is not permitted by dc commit design. Cc: stable@vger.kernel.org Fixes: 7fbf451e7639 ("drm/amd/display: Reinit DPG when exiting dynamic ODM") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: Add smu write msg id fail retry processFudong Wang
A benchmark stress test (12-40 machines x 48hours) found that DCN315 has cases where DC writes to an indirect register to set the smu clock msg id, but when we go to read the same indirect register the returned msg id doesn't match with what we just set it to. So, to fix this retry the write until the register's value matches with the requested value. Cc: stable@vger.kernel.org # 6.1+ Fixes: f94903996140 ("drm/amd/display: Add DCN315 CLK_MGR") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fudong Wang <fudong.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Add SMU v13.0.6 default reset methodsLijo Lazar
For APUs with SMU v13.0.6, mode-2 reset is kept as default and for others mode-1 is the default reset method. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Tested-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31Partially revert "drm/amd/display: update add plane to context logic with a ↵Wenjing Liu
new algorithm" This partially reverts commit 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm"). The new secondary pipe allocation logic triggers an issue with a specific hardware state transition and causes a frame of corruption when toggling between windowed MPO and ODM desktop only mode. Ideally hwss is supposed to handle this scenario. We are temporarily reverting the logic and investigate the root cause why this transition would cause corruptions. Fixes: 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm") Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: register edp_backlight_control() for DCN301Hamza Mahfooz
As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP intermittent black screen during PnP"), we need to turn off the display's backlight before powering off an eDP display. Not doing so will result in undefined behaviour according to the eDP spec. So, set DCN301's edp_backlight_control() function pointer to dce110_edp_backlight_control(). Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765 Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit") Suggested-by: Swapnil Patel <swapnil.patel@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Add bootloader wait for PSP v13Lijo Lazar
Implement the wait for bootloader call back for PSP v13.0 ASICs. Only for ASICs with PSP v13.0.6, it needs an additional check for VBIOS mailbox status. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Tested-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: register a dirty framebuffer callback for fbconHamza Mahfooz
fbcon requires that we implement &drm_framebuffer_funcs.dirty. Otherwise, the framebuffer might take a while to flush (which would manifest as noticeable lag). However, we can't enable this callback for non-fbcon cases since it may cause too many atomic commits to be made at once. So, implement amdgpu_dirtyfb() and only enable it for fbcon framebuffers (we can use the "struct drm_file file" parameter in the callback to check for this since it is only NULL when called by fbcon, at least in the mainline kernel) on devices that support atomic KMS. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: stable@vger.kernel.org # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2519 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Updated TCP/UTCL1 programmingMangesh Gadre
Update TCP/UTCL1 thrashing control settings v2: updated rev_id check Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/pm: fix debugfs pm_info outputAlex Deucher
Print both input and avg power. Fixes: 47f1724db4fe ("drm/amd: Introduce `AMDGPU_PP_SENSOR_GPU_INPUT_POWER`") Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31Merge tag 'dlm-6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: - Allow blocking posix lock requests to be interrupted while waiting. This requires a cancel request to be sent to the userspace daemon where posix lock requests are processed across the cluster. - Fix a posix lock patch from the previous cycle in which lock requests from different file systems could be mixed up. - Fix some long standing problems with nfs posix lock cancelation. - Add a new debugfs file for printing queued callbacks. - Stop modifying buffers that have been used to receive a message. - Misc cleanups and some refactoring. * tag 'dlm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix plock lookup when using multiple lockspaces fs: dlm: don't use RCOM_NAMES for version detection fs: dlm: create midcomms nodes when configure fs: dlm: constify receive buffer fs: dlm: drop rxbuf manipulation in dlm_recover_master_copy fs: dlm: drop rxbuf manipulation in dlm_copy_master_names fs: dlm: get recovery sequence number as parameter fs: dlm: cleanup lock order fs: dlm: remove clear_members_cb fs: dlm: add plock dev tracepoints fs: dlm: check on plock ops when exit dlm fs: dlm: debugfs for queued callbacks fs: dlm: remove unused processed_nodes fs: dlm: add missing spin_unlock fs: dlm: fix F_CANCELLK to cancel pending request fs: dlm: allow to F_SETLKW getting interrupted fs: dlm: remove twice newline
2023-08-31drm/amdgpu: Fix the return for gpu mode1_resetHawking Zhang
amdgpu_device_mode1_reset will return gpu mode1_reset succeed (ret = 0) as long as wait_for_bootloader call succeed, regardless of the status reported by smu or psp firmware. This results to driver continue executing recovery even smu or psp fail to perform mode1 reset. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: fix static screen detection settingSungHuai Wang
[WHY] OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3, but we still follow DCN2 to apply setting for OTG_STATIC_SCREEN_EVENT_MASK. [How] Add new function to apply correct settings for DCN3 series. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: SungHuai Wang <danny.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: fix mode scaling (RMX_.*)Hamza Mahfooz
As made mention of in commit 4a2df0d1f28e ("drm/amd/display: Fixed non-native modes not lighting up"), we shouldn't call drm_mode_set_crtcinfo() once the crtc timings have been decided. Since, it can cause settings to be unintentionally overwritten. So, since dm_state is never NULL now, we can use old_stream to determine if we should call drm_mode_set_crtcinfo() because we only need to set the crtc timing parameters for entirely new streams. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Fixes: bd49f19039c1 ("drm/amd/display: Always set crtcinfo from create_stream_for_sink") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/pm: Fix critical temp unit of SMU v13.0.6Asad Kamal
Critical Temperature needs to be reported in millidegree Celsius. Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Remove SRAM clock gater override by driverMangesh Gadre
rlc firmware does required setting, driver need not do it. Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Add bootloader status checkLijo Lazar
Add a function to wait till bootloader has reached steady state. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Tested-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdkfd: use correct method to get clock under SRIOVHorace Chen
[What] Current SRIOV still using adev->clock.default_XX which gets from atomfirmware. But these fields are abandoned in atomfirmware long ago. Which may cause function to return a 0 value. [How] We don't need to check whether SR-IOV. For SR-IOV one-vf-mode, pm is enabled and VF is able to read dpm clock from pmfw, so we can use dpm clock interface directly. For multi-VF mode, VF pm is disabled, so driver can just react as pm disabled. One-vf-mode is introduced from GFX9 so it shall not have any backward compatibility issue. Signed-off-by: Horace Chen <horace.chen@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Unset baco dummy mode on nbio v7.9Lijo Lazar
BACO dummy mode could be set under reset conditions and that affects framebuffer access. Check If baco dummy mode is set, unset it if so. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Tested-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: set minimum of VBlank_nomChunTao Tso
[Why] If VBlank_nom is too small, it will cause VStartUP_Start smaller than VBackPorch + VSync width which is an invalid case for VStartUP_Start and where to send AS-SDP. [How] Setup a minimum value to VBlank_nom Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: Correct unit conversion for vstartupReza Amini
[why] vstartup is calculated to be a large number. it works because it is within vertical blank, but it reduces region of blank that can be used for power gating. [how] Calculation needs to convert micro seconds to number of vertical lines. Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Reza Amini <reza.amini@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: Roll back unit correctionOvidiu Bunea
[why] This Unit correction exposes a Replay corruption. [how] This reverts commit: commit dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup") Roll back unit conversion until Replay can fix their corruption. Fixes: dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup") Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Enable ras for mp0 v13_0_6 sriovYiPeng Chai
Enable ras for mp0 v13_0_6 sriov Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdkfd: retry after EBUSY is returned from hmm_ranges_get_pagesAlex Sierra
if hmm_range_get_pages returns EBUSY error during svm_range_validate_and_map, within the context of a page fault interrupt. This should retry through svm_range_restore_pages callback. Therefore we treat this as EAGAIN error instead, and defer it to restore pages fallback. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu/jpeg - skip change of power-gating state for sriovSamir Dhume
Powergating is handled in the host driver. Reviewed-by: Zhigang Luo <zhigang.luo@amd.com> Signed-off-by: Samir Dhume <samir.dhume@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/pm: Add critical temp for GC v9.4.3Asad Kamal
Add critical temperature message support func for smu v13.0.6 and expose critical temperature as part of hw mon attributes for GC v9.4.3 v2: Added comment for pmfw version requirement & move the check to get_thermal_temperature_range function Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/pm: Update SMUv13.0.6 PMFW headersAsad Kamal
Update PMFW interface headers for updated metrics table and critical temperature message Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: update gc_info v2_1 from discoveryLe Ma
Several new fields are exposed in gc_info v2_1 Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: update mall info v2 from discoveryLe Ma
Mall info v2 is introduced in ip discovery Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amdgpu: Only support RAS EEPROM on dGPU platformCandice Li
RAS EEPROM device is only supported on dGPU platform for smu v13_0_6. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31Documentation/gpu: Update amdgpu documentationLijo Lazar
7957ec80ef97 ("drm/amdgpu: Add FRU sysfs nodes only if needed") moved the documentation for some of the sysfs nodes to amdgpu_fru_eeprom.c. Update the documentation accordingly. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31Merge tag 'v6.6-vfs.super.fixes.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull more superblock follow-on fixes from Christian Brauner: "This contains two more small follow-up fixes for the super work this cycle. I went through all filesystems once more and detected two minor issues that still needed fixing: - Some filesystems support mtd devices (e.g., mount -t jffs2 mtd2 /mnt). The mtd infrastructure uses the sb->s_mtd pointer to find an existing superblock. When the mtd device is put and sb->s_mtd cleared the superblock can still be found fs_supers and so this risks a use-after-free. Add a small patch that aligns mtd with what we did for regular block devices and switch keying to rely on sb->s_dev. (This was tested with mtd devices and jffs2 as xfstests doesn't support mtd devices.) - Switch nfs back to rely on kill_anon_super() so the superblock is removed from the list of active supers before sb->s_fs_info is freed" * tag 'v6.6-vfs.super.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: NFS: switch back to using kill_anon_super mtd: key superblock by device number fs: export sget_dev()
2023-08-31drm/amdgpu/pm: Add notification for no DC supportBokun Zhang
- There is a DPM issue where if DC is not present, FCLK will stay at low level. We need to send a SMU message to configure the DPM - Reuse smu_v13_0_notify_display_change() for this purpose Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bokun Zhang <bokun.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: Enable Replay for static screen use casesBhawanpreet Lakha
- Setup replay config on device init. - Enable replay if feature is enabled (prioritize replay over PSR, since it can be enabled in more usecases) - Add debug masks to enable replay on supported ASICs Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31powerpc: Fix pud_mkwrite() definition after pte_mkwrite() API changesIngo Molnar
Fix up missed semantic mis-merge between commits 161e393c0f63 ("mm: Make pte_mkwrite() take a VMA") 27af67f35631 ("powerpc/book3s64/mm: enable transparent pud hugepage") where the newly introduced powerpc use of 'pte_mkwrite()' needs to use the 'novma()' versions as per commit 2f0584f3f4bd ("mm: Rename arch pte_mkwrite()'s to pte_mkwrite_novma()"). Fixes: df57721f9a63 ("Merge tag 'x86_shstk_for_6.6-rc1' of [...]") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-08-31x86/fpu/xstate: Fix PKRU covert channelJim Mattson
When XCR0[9] is set, PKRU can be read and written from userspace with XSAVE and XRSTOR, even when CR4.PKE is clear. Clear XCR0[9] when protection keys are disabled. Reported-by: Tavis Ormandy <taviso@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/r/20230831043228.1194256-1-jmattson@google.com
2023-08-31pstore: Base compression input buffer size on estimated compressed sizeArd Biesheuvel
Commit 1756ddea6916 ("pstore: Remove worst-case compression size logic") removed some clunky per-algorithm worst case size estimation routines on the basis that we can always store pstore records uncompressed, and these worst case estimations are about how much the size might inadvertently *increase* due to encapsulation overhead when the input cannot be compressed at all. So if compression results in a size increase, we just store the original data instead. However, it seems that the original code was misinterpreting these calculations as an estimation of how much uncompressed data might fit into a compressed buffer of a given size, and it was using the results to consume the input data in larger chunks than the pstore record size, relying on the compression to ensure that what ultimately gets stored fits into the available space. One result of this, as observed and reported by Linus, is that upgrading to a newer kernel that includes the given commit may result in pstore decompression errors reported in the kernel log. This is due to the fact that the existing records may unexpectedly decompress to a size that is larger than the pstore record size. Another potential problem caused by this change is that we may underutilize the fixed sized records on pstore backends such as ramoops. And on pstore backends with variable sized records such as EFI, we will end up creating many more entries than before to store the same amount of compressed data. So let's fix both issues, by bringing back the typical case estimation of how much ASCII text captured from the dmesg log might fit into a pstore record of a given size after compression. The original implementation used the computation given below for zlib: switch (size) { /* buffer range for efivars */ case 1000 ... 2000: cmpr = 56; break; case 2001 ... 3000: cmpr = 54; break; case 3001 ... 3999: cmpr = 52; break; /* buffer range for nvram, erst */ case 4000 ... 10000: cmpr = 45; break; default: cmpr = 60; break; } return (size * 100) / cmpr; We will use the previous worst-case of 60% for compression. For decompression go extra large (3x) so we make sure there's enough space for anything. While at it, rate limit the error message so we don't flood the log unnecessarily on systems that have accumulated a lot of pstore history. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20230830212238.135900-1-ardb@kernel.org Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2023-08-31fbdev: mx3fb: Remove the driverFabio Estevam
The mx3fb driver does not support devicetree and i.MX has been converted to a DT-only platform since kernel 5.10. As there is no user for this driver anymore, just remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-31fbdev/core: Use list_for_each_entry() helperJinjie Ruan
Convert list_for_each() to list_for_each_entry() so that the pos list_head pointer and list_entry() call are no longer needed, which can reduce a few lines of code. No functional changed. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-31selftests/bpf: Include build flavors for install targetBjörn Töpel
When using the "install" or targets depending on install, e.g. "gen_tar", the BPF machine flavors weren't included. A command like: | make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- O=/workspace/kbuild \ | HOSTCC=gcc FORMAT= SKIP_TARGETS="arm64 ia64 powerpc sparc64 x86 sgx" \ | -C tools/testing/selftests gen_tar would not include bpf/no_alu32, bpf/cpuv4, or bpf/bpf-gcc. Include the BPF machine flavors for "install" make target. Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230831162954.111485-1-bjorn@kernel.org
2023-08-31bpf: Annotate bpf_long_memcpy with data_raceDaniel Borkmann
syzbot reported a data race splat between two processes trying to update the same BPF map value via syscall on different CPUs: BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xfffffff000002788 The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size and forced to use long read/writes to try to atomically copy long counters. It is best-effort only and no barriers are here since it _will_ race with concurrent updates from BPF programs. The bpf_long_memcpy() is called from bpf(2) syscall. Marco suggested that the best way to make this known to KCSAN would be to use data_race() annotation. Reported-by: syzbot+97522333291430dd277f@syzkaller.appspotmail.com Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.1693342186.git.daniel@iogearbox.net
2023-08-31Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - Refactor VFP code and convert to C code (Ard Biesheuvel) - Fix hardware breakpoint single-stepping using bpf_overflow_handler - Make SMP stop calls asynchronous allowing panic from irq context to work - Fix for kernel-doc warnings for locomo * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: Revert part of ae1f8d793a19 ("ARM: 9304/1: add prototype for function called only from asm") ARM: 9318/1: locomo: move kernel-doc to prevent warnings ARM: 9317/1: kexec: Make smp stop calls asynchronous ARM: 9316/1: hw_breakpoint: fix single-stepping when using bpf_overflow_handler ARM: entry: Make asm coproc dispatch code NWFPE only ARM: iwmmxt: Use undef hook to enable coprocessor for task ARM: entry: Disregard Thumb undef exception in coproc dispatch ARM: vfp: Use undef hook for handling VFP exceptions ARM: kernel: Get rid of thread_info::used_cp[] array ARM: vfp: Reimplement VFP exception entry in C code ARM: vfp: Remove workaround for Feroceon CPUs ARM: vfp: Record VFP bounces as perf emulation faults
2023-08-31Merge tag 'powerpc-6.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the configured SMT state when hotplugging CPUs into the system - Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix MMU to avoid a broadcast TLBIE flush on exit - Drop the exclusion between ptrace/perf watchpoints, and drop the now unused associated arch hooks - Add support for the "nohlt" command line option to disable CPU idle - Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1 - Rework memory block size determination, and support 256MB size on systems with GPUs that have hotpluggable memory - Various other small features and fixes Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai. * tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits) macintosh/ams: linux/platform_device.h is needed powerpc/xmon: Reapply "Relax frame size for clang" powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled powerpc/iommu: Fix notifiers being shared by PCI and VIO buses powerpc/mpc5xxx: Add missing fwnode_handle_put() powerpc/config: Disable SLAB_DEBUG_ON in skiroot powerpc/pseries: Remove unused hcall tracing instruction powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n powerpc: dts: add missing space before { powerpc/eeh: Use pci_dev_id() to simplify the code powerpc/64s: Move CPU -mtune options into Kconfig powerpc/powermac: Fix unused function warning powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT powerpc: Don't include lppaca.h in paca.h powerpc/pseries: Move hcall_vphn() prototype into vphn.h powerpc/pseries: Move VPHN constants into vphn.h cxl: Drop unused detach_spa() powerpc: Drop zalloc_maybe_bootmem() powerpc/powernv: Use struct opal_prd_msg in more places ...
generated by cgit (git 2.34.1) at 2025-09-12 10:27:03 +0000