| Age | Commit message (Collapse) | Author |
|---|
|
During resume, the driver can call ieee80211_add_gtk_rekey for keys that
are not programmed into the device, e.g. keys of inactive links.
Don't mark such a key as uploaded to avoid removing it later from the
driver/device.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.655094412b0b.Iacae31af3ba2a705da0a9baea976c2f799d65dc4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
At the end of reconfig we are activating all the links that were active
before the error.
During the activation, _ieee80211_link_use_channel will unassign and
re-assign the chanctx from/to the link.
But we only need to do the assign, as we are re-building the state as it
was before the reconfig.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.6245c3ae7031.Ia5f68992c7c112bea8a426c9339f50c88be3a9ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
To support testing scenarios.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.6916e0a49955.I48e374ad7e3ea5877a5e93e5c5fe8301465771c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Under the previous commit's assumption that FIPS isn't
supported by hardware, we don't need to modify the
cipher suite list, but just need to use the software
one instead of the driver's in this case, so clean up
the code.
Also fix it to exclude TKIP in this case, since that's
also dependent on RC4.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.cff427e8f8a5.I744d1ea6a37e3ea55ae8bc3e770acee734eff268@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When fips_enabled is set, don't send any keys to the driver
(including possibly WoWLAN KEK/KCK material), assuming that
no device exists with the necessary certifications. If this
turns out to be false in the future, we can add a HW flag.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.e5eebc2b19d8.I968ef8c9ffb48d464ada78685bd25d22349fb063@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix a condition that verified valid values of interface types.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.7ad199ca5939.I0ac1ff74798bf59a87a57f2e18f2153c308b119b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
All the paths that could return an error are considered
misuses of the function and WARN already, and none of
the callers ever check the return value. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.5b436ee3c20c.Ieff61ec510939adb5fe6da4840557b649b3aa820@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a link has no chanctx, indicating it is an inactive link
that we tracked CSA for, then attempting to unreserve the
reserved chanctx will throw a warning and fail, since there
never was a reserved chanctx. Skip the unreserve.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.022192f4b1ae.Ib58156ac13e674a9f4d714735be0764a244c0aae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The DMA map functions can fail and should be tested for errors.
If the mapping fails, unmap and return an error.
Fixes: 788838ebe8a4 ("mwl8k: use pci_unmap_addr{,set}() to keep track of unmap addresses on rx")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20250709111339.25360-2-fourier.thomas@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's no need to always print it, it's only useful for
debugging specific client issues. Make it a debug message.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/linux-wireless/20250529070922.3467-1-pmenzel@molgen.mpg.de/
Link: https://patch.msgid.link/20250708105849.22448-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit e3eac9f32ec0 ("wifi: cfg80211: Annotate struct
cfg80211_scan_request with __counted_by").
This really has been a completely failed experiment. There were
no actual bugs found, and yet at this point we already have four
"fixes" to it, with nothing to show for but code churn, and it
never even made the code any safer.
In all of the cases that ended up getting "fixed", the structure
is also internally inconsistent after the n_channels setting as
the channel list isn't actually filled yet. You cannot scan with
such a structure, that's just wrong. In mac80211, the struct is
also reused multiple times, so initializing it once is no good.
Some previous "fixes" (e.g. one in brcm80211) are also just setting
n_channels before accessing the array, under the assumption that the
code is correct and the array can be accessed, further showing that
the whole thing is just pointless when the allocation count and use
count are not separate.
If we really wanted to fix it, we'd need to separately track the
number of channels allocated and the number of channels currently
used, but given that no bugs were found despite the numerous syzbot
reports, that'd just be a waste of time.
Remove the __counted_by() annotation. We really should also remove
a number of the n_channels settings that are setting up a structure
that's inconsistent, but that can wait.
Reported-by: syzbot+e834e757bd9b3d3e1251@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e834e757bd9b3d3e1251
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Link: https://patch.msgid.link/20250714142130.9b0bbb7e1f07.I09112ccde72d445e11348fc2bef68942cb2ffc94@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.16-rc7
Fix an ath12k performance regression introduce in v6.16-rc1
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mikulas Patocka:
- dm-bufio: fix scheduling in atomic
* tag 'for-6.16/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-bufio: fix sched in atomic context
|
|
When working in station mode, TDLS peers are assigned macid 0, even
though 0 was already assigned to the AP. This causes the connection
with the AP to stop working after the TDLS connection is torn down.
Assign the next available macid to TDLS peers, same as client stations
in AP mode.
Fixes: 902cb7b11f9a ("wifi: rtw88: assign mac_id for vif/sta and update to TX desc")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/58648c09-8553-4bcc-a977-9dc9afd63780@gmail.com
|
|
This is needed for AP mode. Otherwise client sees the network, but
can't connect to it.
REG_FWHW_TXQ_CTRL+1 is set to WLAN_TXQ_RPT_EN (0x1F) in common mac
init function (__rtw8723x_mac_init), but the value was overwritten
from mac table later.
Tables with register values for phy parameters initialization are
copied from vendor driver usually. When table will be regenerated,
manual modifications to it may be lost. To avoid regressions in this
case new callback mac_postinit is introduced, that is called after
parameters from table are set.
Tested on rtl8723cs, that reuses rtw8703b driver.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250711084740.3396766-1-andrej.skvortzov@gmail.com
|
|
Commit 1e5b3b3fe9e0 ("rtl8xxxu: Adjust RX skb size to include space for
phystats") increased the skb size when aggregation is enabled but decreased
it for the aggregation disabled case.
As a result, if a frame near the maximum size is received,
rtl8xxxu_rx_complete() is called with status -EOVERFLOW and then the
driver starts to malfunction and no further communication is possible.
Restore the skb size in the aggregation disabled case.
Fixes: 1e5b3b3fe9e0 ("rtl8xxxu: Adjust RX skb size to include space for phystats")
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250709121522.1992366-1-martin.kaistra@linutronix.de
|
|
up to 2
To support multiple channels, 2 for this case, RFK requires to record each
calibration result for each channel in different RFK tables, and also needs
to notify FW. Then, when FW runs in MCC (multi-channel concurrency), it can
switch to the corresponding calibration result according to the channel.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-15-pkshih@realtek.com
|
|
After v0.29.128.0, RTL8852B FW supports SCAN_OFFLOAD_EXTRA_OP feature.
With it, FW can do back-op and TX NULL frames on the second connection.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-14-pkshih@realtek.com
|
|
chanctx up to 2
To support multiple channels, 2 for this case, RFK requires to record each
calibration result for each channel in different RFK tables, and also needs
to notify FW. Then, when FW runs in MCC (multi-channel concurrency), it can
switch to the corresponding calibration result according to the channel.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-13-pkshih@realtek.com
|
|
After v0.29.127.0, RTL8852BT FW supports SCAN_OFFLOAD_EXTRA_OP feature.
With it, FW can do back-op and TX NULL frames on the second connection.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-12-pkshih@realtek.com
|
|
8852BT needs to call TX wake notify once entering Leisure Power Save.
8852C needs to call TX wake notify after entering low power mode. Other
AX chips only MGMT packets needs to call TX wake after entering low power
mode. BE chips no need to call TX wake.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-11-pkshih@realtek.com
|
|
8852BT after FW 0.29.127, 8852B after FW 0.29.128 and 8922A after FW
0.35.79, the SER L2 flow determines different L2 types by parameter,
the zero value will trigger FW SER L2 assert.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-10-pkshih@realtek.com
|
|
Eric Dumazet says:
====================
tcp: receiver changes
Before accepting an incoming packet:
- Make sure to not accept a packet beyond advertized RWIN.
If not, increment a new SNMP counter (LINUX_MIB_BEYOND_WINDOW)
- ooo packets should update rcv_mss and tp->scaling_ratio.
- Make sure to not accept packet beyond sk_rcvbuf limit.
This series includes three associated packetdrill tests.
====================
Link: https://patch.msgid.link/20250711114006.480026-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check that TCP receiver behavior after "tcp: stronger sk_rcvbuf checks"
Too fat packet is dropped unless receive queue is empty.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, TCP stack accepts incoming packet if sizes of receive queues
are below sk->sk_rcvbuf limit.
This can cause memory overshoot if the packet is big, like an 1/2 MB
BIG TCP one.
Refine the check to take into account the incoming skb truesize.
Note that we still accept the packet if the receive queue is empty,
to not completely freeze TCP flows in pathological conditions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These functions to not modify the skb, add a const qualifier.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We make sure tcpi_rcv_mss and tp->scaling_ratio
are correctly updated if no in-order packet has been received yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_measure_rcv_mss() is used to update icsk->icsk_ack.rcv_mss
(tcpi_rcv_mss in tcp_info) and tp->scaling_ratio.
Calling it from tcp_data_queue_ofo() makes sure these
fields are updated, and permits a better tuning
of sk->sk_rcvbuf, in the case a new flow receives many ooo
packets.
Fixes: dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test checks TCP behavior when receiving a packet beyond the window.
It checks the new TcpExtBeyondWindow SNMP counter.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new SNMP MIB : LINUX_MIB_BEYOND_WINDOW
Incremented when an incoming packet is received beyond the
receiver window.
nstat -az | grep TcpExtBeyondWindow
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, TCP accepts incoming packets which might go beyond the
offered RWIN.
Add to tcp_sequence() the validation of packet end sequence.
Add the corresponding check in the fast path.
We relax this new constraint if the receive queue is empty,
to not freeze flows from buggy peers.
Add a new drop reason : SKB_DROP_REASON_TCP_INVALID_END_SEQUENCE.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711114006.480026-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some FW features may have variants on how to deal with in leaf functions,
e.g. H2C commands. However, from SW component point of view, it might not
matter which variant is supported exactly. In some cases, SW component may
just care whether any of the variants is supported or not.
So, introduce a concept of FW feature group which can manage a set of FW
features and can easily be checked if at least one of them is supported.
Since CRASH_TRIGGER will have variants and then matches the case mentioned
above, so redefine CRASH_TRIGGER as a FW feature group and add a variant
of type 0 for original handling.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-9-pkshih@realtek.com
|
|
8852B after FW 0.29.127, 8852BT after FW 0.29.127 and 8922A after FW
0.35.76 driver check LPS H2C command received by FW using C2H reg instead
of done ack.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-8-pkshih@realtek.com
|
|
For some implementation acting as GO under MCC(GO+STA), the GO's TBTT
might change after STA roams to another AP. This could result the new GO
beacon TX at the STA timeslot of GC+STA, causing GC beacon loss.
Therefore, if the GC detects beacon loss, it will pause MCC and remain
on the GO side for 100 TU to detect the new TBTT beacon.
Additionally, some implementation acting as GO under MCC might TX beacon
too close to the NoA period. The GC calculates timeslot pattern the TOB
(time offset behind) or TOA(time offset ahead) less than the minimum
RX beacon time, which leads to beacon loss. Therefore, disable the
beacon filter in this case. Then, if the GO's TBTT changed, the pattern
TOB/TOA greater than the minimum RX beacon time, the beacon filter should
be retriggered during MCC update.
Moreover, if the beacon filter is disabled initially but the GO timeslot
change, causing QoS null data detection fail, also pause MCC to detect new
TBTT beacon.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-7-pkshih@realtek.com
|
|
HW scan of WiFi 7 chips supports multiple op channel configurations.
When concurrency, fill two channels info to HW scan to avoid packet
lost.
However, the OP chan timing is arranged by FW, and the actual stay
period depends on AP. It's hard to calculate total scan time for once
NoA in advance. Therefore, change the scan back to GO OP channel every
200TU and TX beacon to ensure GC doesn't beacon loss. Additionally, add
a period NoA with large duration to ensure GC doesn't TX packet during
GO scanning and can still listen beacon at TBTT to update the new NoA
info after scan complete.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-6-pkshih@realtek.com
|
|
MCC stop might triggered by scan, and need to force to stay at GO role
to keep TX beacon. Also, AX chips need to TX more 3 beacons to ensure
GC can receive once NoA beacon before scan when GC in courtesy mode.
BE chips no needs to TX 3 more beacon because it can TX beacon every
200TU during scan, even GC in courtesy mode can receive beacon every
600TU.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-5-pkshih@realtek.com
|
|
MCC require time to switch channel when changing timeslot. If GC TX
nulldata 0 while GO is switching channel, GO can't receive it. Therefore,
enlarge the GO NoA duration to cover the channel switching time.
However, the enlarged NoA duration might cause GC's timeslot less than
minimum of RX beacon time. Therefore, adjust strict and anchor pattern
condition to avoid it.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-4-pkshih@realtek.com
|
|
The PD lower bound set after one interface is connected, If second
interface needs to connect, packets might not be detected because the
PD lower bound is too high. Therefore, a DIG suspend/resume flow is
added to decrease the PD lower bound during scanning or connection,
and the original PD level is resumed afterward.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-3-pkshih@realtek.com
|
|
Packet detection(PD) lower bound is the threshold for sensing packet,
and it is dynamically calculated based on RSSI. In MCC, the two
interfaces have different RSSI values, so it is necessary to set
different values to ensure packets can be received. Therefore, add
H2C command to let firmware to switch PD lower bound when MCC mode.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250710042423.73617-2-pkshih@realtek.com
|
|
Two more drivers got added that use LIBWX and cause a build warning
WARNING: unmet direct dependencies detected for LIBWX
Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- NGBEVF [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PCI_MSI [=y]
Selected by [m]:
- NGBE [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
ld: drivers/net/ethernet/wangxun/libwx/wx_lib.o: in function `wx_clean_tx_irq':
wx_lib.c:(.text+0x5a68): undefined reference to `ptp_schedule_worker'
ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset':
wx_ethtool.c:(.text+0x880): undefined reference to `phylink_ethtool_nway_reset'
Add the same dependency on PTP_1588_CLOCK_OPTIONAL to the two driver
using this library module, following the pattern from commit
8fa19c2c69fb ("net: wangxun: fix LIBWX dependencies").
Fixes: 377d180bd71c ("net: wangxun: add txgbevf build")
Fixes: a0008a3658a3 ("net: wangxun: add ngbevf build")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20250711082339.1372821-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Process ACPI DSM function 11 to get 6 GHz VLP support by country. If
not allowed, return error to block the connection. By default, i.e.
ACPI DSM function is not configured, disallow 6 GHz VLP on country US
and country CA, because some platform-level certifications are needed
in FCC regulation before operating on 6 GHz VLP connection.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250709065006.32028-5-pkshih@realtek.com
|
|
of regd_UK
ACPI DSM function 10 is defined for the enablement for Realtek regulatory
rules. The first rule is whether to allow regd_UK regulatory settings or
not. If not, the strict one, i.e. regd_ETSI, regulatory settings will be
used on country GB.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250709065006.32028-4-pkshih@realtek.com
|
|
UNII-4 conf
Originally, fields of ACPI DSM function 6 were handled for countries
following specific regulatory.
BIT(0) for countries following FCC regulatory
BIT(1) for countries following IC regulatory
Now, update to the following (one field for one specific country).
BIT(0) for country US
BIT(1) for country CA
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250709065006.32028-3-pkshih@realtek.com
|
|
ACPI DSM function 7 is used to decide whether 6 GHz Standard Power
(SP) is allowed on given countries. Now, add BIT(1) for country CA.
Besides, for searching country index, replace for-loop with index
getter function.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250709065006.32028-2-pkshih@realtek.com
|
|
A net device has a threaded sysctl that can be used to enable threaded
NAPI polling on all of the NAPI contexts under that device. Allow
enabling threaded NAPI polling at individual NAPI level using netlink.
Extend the netlink operation `napi-set` and allow setting the threaded
attribute of a NAPI. This will enable the threaded polling on a NAPI
context.
Add a test in `nl_netdev.py` that verifies various cases of threaded
NAPI being set at NAPI and at device level.
Tested
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250710211203.3979655-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic. Regular drivers do not have this problem since
they are probed asynchronously (without RTNL held).
Generic PHYs do not support LEDs anyway, so don't bother registering
them.
[JakubL this is a net-next version of
commit f0f2b992d818 ("net: phy: Don't register LEDs for genphy"),
which uses APIs removed in -next.]
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250710201454.1280277-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic.
Generic PHYs do not support LEDs anyway, so don't bother registering
them.
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250707195803.666097-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add flow control mechanism between paired netdevsim devices to stop the
TX queue during high traffic scenarios. When a receive queue becomes
congested (approaching NSIM_RING_SIZE limit), the corresponding transmit
queue on the peer device is stopped using netif_subqueue_try_stop().
Once the receive queue has sufficient capacity again, the peer's
transmit queue is resumed with netif_tx_wake_queue().
Key changes:
* Add nsim_stop_peer_tx_queue() to pause peer TX when RX queue is full
* Add nsim_start_peer_tx_queue() to resume peer TX when RX queue drains
* Implement queue mapping validation to ensure TX/RX queue count match
* Wake all queues during device unlinking to prevent stuck queues
* Use RCU protection when accessing peer device references
* wake the queues when changing the queue numbers
* Remove IFF_NO_QUEUE given it will enqueue packets now
The flow control only activates when devices have matching TX/RX queue
counts to ensure proper queue mapping.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250711-netdev_flow_control-v3-1-aa1d5a155762@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Added a test for variable PMTU in broadcast routes.
This test uses iputils' ping and attempts to send a ping between
two peers, which should result in a regular echo reply.
This test will fail when the receiving peer does not receive the echo
request due to a lack of packet fragmentation.
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Link: https://patch.msgid.link/20250710142714.12986-2-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, __mkroute_output overrules the MTU value configured for
broadcast routes.
This buggy behaviour can be reproduced with:
ip link set dev eth1 mtu 9000
ip route del broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2
ip route add broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 mtu 1500
The maximum packet size should be 1500, but it is actually 8000:
ping -b 192.168.0.255 -s 8000
Fix __mkroute_output to allow MTU values to be configured for
for broadcast routes (to support a mixed-MTU local-area-network).
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Link: https://patch.msgid.link/20250710142714.12986-1-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
