summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-07net: ethernet: sun4i-emac: Fix misuse of strlcpyJoe Perches
Probable cut&paste typo - use the correct field size. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07Merge branch 'gtp-fix-several-bugs'David S. Miller
Taehee Yoo says: ==================== gtp: fix several bugs This patch series fixes several bugs in the gtp module. First patch fixes suspicious RCU usage. The problem is to use rcu_dereference_sk_user_data() outside of RCU read critical section. Second patch fixes use-after-free. gtp_encap_destroy() is called twice. gtp_encap_destroy() use both gtp->sk0 and gtp->sk1u. these pointers can be freed in gtp_encap_destroy(). So, gtp_encap_destroy() should avoid using freed sk pointer. Third patch removes duplicate code in gtp_dellink(). gtp_dellink() calls gtp_encap_disable() twice. So, remove one of them. Fourth patch fixes usage of GFP_KERNEL. GFP_KERNEL can not be used in RCU read critical section. This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL. Fifth patch fixes use-after-free in gtp_newlink(). gtp_newlink() uses gtp_net which would be destroyed by the __exit_net routine. So, gtp_newlink should not be called after the __exit_net routine. Sixth patch adds missing error handling routine in gtp_encap_enable(). gtp_encap_enable() will fail, if invalid role value is sent from user-space. if so, gtp_encap_enable() should execute error handling routine. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: add missing gtp_encap_disable_sock() in gtp_encap_enable()Taehee Yoo
If an invalid role is sent from user space, gtp_encap_enable() will fail. Then, it should call gtp_encap_disable_sock() but current code doesn't. It makes memory leak. Fixes: 91ed81f9abc7 ("gtp: support SGSN-side tunnels") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix use-after-free in gtp_newlink()Taehee Yoo
Current gtp_newlink() could be called after unregister_pernet_subsys(). gtp_newlink() uses gtp_net but it can be destroyed by unregister_pernet_subsys(). So unregister_pernet_subsys() should be called after rtnl_link_unregister(). Test commands: #SHELL 1 while : do for i in {1..5} do ./gtp-link add gtp$i & done killall gtp-link done #SHELL 2 while : do modprobe -rv gtp done Splat looks like: [ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp] [ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126 [ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50 [ 753.185801] Call Trace: [ 753.186264] dump_stack+0x7c/0xbb [ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.187583] print_address_description+0xc7/0x240 [ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189846] __kasan_report+0x12a/0x16f [ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.191298] kasan_report+0xe/0x20 [ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp] [ 753.192580] ? __netlink_ns_capable+0xc3/0xf0 [ 753.193370] __rtnl_newlink+0xb9f/0x11b0 [ ... ] [ 753.241201] Allocated by task 7186: [ 753.241844] save_stack+0x19/0x80 [ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 753.243192] __kmalloc+0x13e/0x300 [ 753.243764] ops_init+0xd6/0x350 [ 753.244314] register_pernet_operations+0x249/0x6f0 [ ... ] [ 753.251770] Freed by task 7178: [ 753.252288] save_stack+0x19/0x80 [ 753.252833] __kasan_slab_free+0x111/0x150 [ 753.253962] kfree+0xc7/0x280 [ 753.254509] ops_free_list.part.11+0x1c4/0x2d0 [ 753.255241] unregister_pernet_operations+0x262/0x390 [ ... ] [ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next. [ 753.287241] ------------[ cut here ]------------ [ 753.287794] kernel BUG at lib/list_debug.c:25! [ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50 [ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0 [ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b [ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286 [ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000 [ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69 [ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21 [ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878 [ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458 [ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0 [ 753.302183] Call Trace: [ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp] [ 753.303037] ? __netlink_ns_capable+0xc3/0xf0 [ 753.303576] __rtnl_newlink+0xb9f/0x11b0 [ 753.304092] ? rtnl_link_unregister+0x230/0x230 Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix Illegal context switch in RCU read-side critical section.Taehee Yoo
ipv4_pdp_add() is called in RCU read-side critical section. So GFP_KERNEL should not be used in the function. This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL. Test commands: gtp-link add gtp1 & gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2 Splat looks like: [ 130.618881] ============================= [ 130.626382] WARNING: suspicious RCU usage [ 130.626994] 5.2.0-rc6+ #50 Not tainted [ 130.627622] ----------------------------- [ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section! [ 130.629684] [ 130.629684] other info that might help us debug this: [ 130.629684] [ 130.631022] [ 130.631022] rcu_scheduler_active = 2, debug_locks = 1 [ 130.632136] 4 locks held by gtp-tunnel/1025: [ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40 [ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130 [ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp] [ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp] [ 130.638348] [ 130.638348] stack backtrace: [ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50 [ 130.641318] Call Trace: [ 130.641707] dump_stack+0x7c/0xbb [ 130.642252] ___might_sleep+0x2c0/0x3b0 [ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0 [ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp] [ 130.644371] genl_family_rcv_msg+0x63a/0x1030 [ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090 [ 130.645845] ? genl_unregister_family+0x630/0x630 [ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0 [ 130.647293] ? check_flags.part.40+0x440/0x440 [ 130.648099] genl_rcv_msg+0xa3/0x130 [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: remove duplicate code in gtp_dellink()Taehee Yoo
gtp_encap_disable() in gtp_dellink() is unnecessary because it will be called by unregister_netdevice(). unregister_netdevice() internally calls gtp_dev_uninit() by ->ndo_uninit(). And gtp_dev_uninit() calls gtp_encap_disable(). Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix use-after-free in gtp_encap_destroy()Taehee Yoo
gtp_encap_destroy() is called twice. 1. When interface is deleted. 2. When udp socket is destroyed. either gtp->sk0 or gtp->sk1u could be freed by sock_put() in gtp_encap_destroy(). so, when gtp_encap_destroy() is called again, it would uses freed sk pointer. patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected by rtnl_lock. so, rtnl_lock() is added. Test command: gtp-link add gtp1 & killall gtp-link ip link del gtp1 Splat looks like: [ 83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0 [ 83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008 [ 83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50 [ 83.188469] Call Trace: [ ... ] [ 83.200126] lock_acquire+0x141/0x380 [ 83.200575] ? lock_sock_nested+0x3a/0xf0 [ 83.201069] _raw_spin_lock_bh+0x38/0x70 [ 83.201551] ? lock_sock_nested+0x3a/0xf0 [ 83.202044] lock_sock_nested+0x3a/0xf0 [ 83.202520] gtp_encap_destroy+0x18/0xe0 [gtp] [ 83.203065] gtp_encap_disable.isra.14+0x13/0x50 [gtp] [ 83.203687] gtp_dellink+0x56/0x170 [gtp] [ 83.204190] rtnl_delete_link+0xb4/0x100 [ ... ] [ 83.236513] Allocated by task 976: [ 83.236925] save_stack+0x19/0x80 [ 83.237332] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 83.237894] kmem_cache_alloc+0xd8/0x280 [ 83.238360] sk_prot_alloc.isra.42+0x50/0x200 [ 83.238874] sk_alloc+0x32/0x940 [ 83.239264] inet_create+0x283/0xc20 [ 83.239684] __sock_create+0x2dd/0x540 [ 83.240136] __sys_socket+0xca/0x1a0 [ 83.240550] __x64_sys_socket+0x6f/0xb0 [ 83.240998] do_syscall_64+0x9c/0x450 [ 83.241466] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 83.242061] [ 83.242249] Freed by task 0: [ 83.242616] save_stack+0x19/0x80 [ 83.243013] __kasan_slab_free+0x111/0x150 [ 83.243498] kmem_cache_free+0x89/0x250 [ 83.244444] __sk_destruct+0x38f/0x5a0 [ 83.245366] rcu_core+0x7e9/0x1c20 [ 83.245766] __do_softirq+0x213/0x8fa Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix suspicious RCU usageTaehee Yoo
gtp_encap_enable_socket() and gtp_encap_destroy() are not protected by rcu_read_lock(). and it's not safe to write sk->sk_user_data. This patch make these functions to use lock_sock() instead of rcu_dereference_sk_user_data(). Test commands: gtp-link add gtp1 Splat looks like: [ 83.238315] ============================= [ 83.239127] WARNING: suspicious RCU usage [ 83.239702] 5.2.0-rc6+ #49 Not tainted [ 83.240268] ----------------------------- [ 83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage! [ 83.243828] [ 83.243828] other info that might help us debug this: [ 83.243828] [ 83.246325] [ 83.246325] rcu_scheduler_active = 2, debug_locks = 1 [ 83.247314] 1 lock held by gtp-link/1008: [ 83.248523] #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0 [ 83.251503] [ 83.251503] stack backtrace: [ 83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49 [ 83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 83.254562] Call Trace: [ 83.254995] dump_stack+0x7c/0xbb [ 83.255567] gtp_encap_enable_socket+0x2df/0x360 [gtp] [ 83.256415] ? gtp_find_dev+0x1a0/0x1a0 [gtp] [ 83.257161] ? memset+0x1f/0x40 [ 83.257843] gtp_newlink+0x90/0xa21 [gtp] [ 83.258497] ? __netlink_ns_capable+0xc3/0xf0 [ 83.259260] __rtnl_newlink+0xb9f/0x11b0 [ 83.260022] ? rtnl_link_unregister+0x230/0x230 [ ... ] Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07Merge branch 'net-dsa-Add-Vitesse-VSC73xx-parallel-mode'David S. Miller
Pawel Dembicki says: ==================== net: dsa: Add Vitesse VSC73xx parallel mode Main goal of this patch series is to add support for CPU attached parallel bus in Vitesse VSC73xx switches. Existing driver supports only SPI mode. Second change is needed for devices in unmanaged state. V3: - fix commit messages and descriptions about memory-mapped I/O mode V2: - drop changes in compatible strings - make changes less invasive - drop mutex in platform part and move mutex from core to spi part - fix indentation - fix devm_ioremap_resource result check - add cover letter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07net: dsa: vsc73xx: Assert reset if iCPU is enabledPawel Dembicki
Driver allow to use devices with disabled iCPU only. Some devices have pre-initialised iCPU by bootloader. That state make switch unmanaged. This patch force reset if device is in unmanaged state. In the result chip lost internal firmware from RAM and it can be managed. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07net: dsa: vsc73xx: add support for parallel modePawel Dembicki
This patch add platform part of vsc73xx driver. It allows to use chip connected to a parallel memory bus and work in memory-mapped I/O mode. (aka PI bus in chip manual) By default device is working in big endian mode. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07net: dsa: vsc73xx: Split vsc73xx driverPawel Dembicki
This driver (currently) only takes control of the switch chip over SPI and configures it to route packages around when connected to a CPU port. But Vitesse chip support also parallel interface. This patch split driver into two parts: core and spi. It is required for add support to another managing interface. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07net: dsa: Change DT bindings for Vitesse VSC73xx switchesPawel Dembicki
This commit introduce how to use vsc73xx platform driver. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07Merge branch 'net-tls-fix-poll-wake-up'David S. Miller
Jakub Kicinski says: ==================== net/tls: fix poll() wake up This small fix + selftest series is very similar to the previous commit 04b25a5411f9 ("net/tls: fix no wakeup on partial reads"). This time instead of recvmsg we're fixing poll wake up. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07selftests/tls: add test for poll() with data in TLS ULPJakub Kicinski
Add a test which checks if leftover record data in TLS layer correctly wakes up poll(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07net/tls: fix poll ignoring partially copied recordsJakub Kicinski
David reports that RPC applications which use epoll() occasionally get stuck, and that TLS ULP causes the kernel to not wake applications, even though read() will return data. This is indeed true. The ctx->rx_list which holds partially copied records is not consulted when deciding whether socket is readable. Note that SO_RCVLOWAT with epoll() is and has always been broken for kernel TLS. We'd need to parse all records from the TCP layer, instead of just the first one. Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Reported-by: David Beckett <david.beckett@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07tipc: use rcu dereference functions properlyXin Long
For these places are protected by rcu_read_lock, we change from rcu_dereference_rtnl to rcu_dereference, as there is no need to check if rtnl lock is held. For these places are protected by rtnl_lock, we change from rcu_dereference_rtnl to rtnl_dereference/rcu_dereference_protected, as no extra memory barriers are needed under rtnl_lock() which also protects tn->bearer_list[] and dev->tipc_ptr/b->media_ptr updating. rcu_dereference_rtnl will be only used in the places where it could be under rcu_read_lock or rtnl_lock. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07r8169: sync few chip names with vendor driverHeiner Kallweit
This patch syncs the name of few chip versions with the latest vendor driver version. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-07-07 Here's the main bluetooth-next pull request for 5.3: - Added support for new devices from Qualcomm, Realtek and Broadcom and MediaTek - Various fixes to 6LoWPAN - Fix L2CAP PSM namespace separation for LE & BR/EDR - Fix behavior with Microsoft Surface Precision Mouse - Added support for LE Ping feature - Fix L2CAP Disconnect response handling if received in wrong state Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-06Merge tag 'wireless-drivers-next-for-davem-2019-07-06' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.3 Second, and last, set of patches for 5.3. Major changes: mt76 * use NAPI polling for tx cleanup on mt7603/mt7615 * add support for toggling edcca on mt7603 * fix rate control / tx status reporting issues on mt76x02/mt7603 * add support for eeprom calibration data from mtd on mt7615 * support configuring tx power on mt7615 * per-chain signal reporting on mt7615 iwlwifi * Update the FW API for Channel State Information (CSI) * Special Specific Absorption Rate (SAR) implementation for South Korea ath10k * fixes for SDIO support * add support for firmware logging via WMI ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-06Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devicesSean Wang
This adds the support of enabling MT7663U Bluetooth function running on the top of btusb driver. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0e8d ProdID=7663 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devicesSean Wang
This adds the support of enabling MT7668U Bluetooth function running on the top of btusb driver. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0e8d ProdID=7668 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: 6lowpan: always check destination addressJosua Mayer
BLE based 6LoWPAN networks are highly constrained in bandwidth. Do not take a short-cut, always check if the destination address is known to belong to a peer. As a side-effect this also removes any behavioral differences between one, and two or more connected peers. Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by: Michael Scott <mike@foundries.io> Signed-off-by: Josua Mayer <josua.mayer@jm0.eu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: 6lowpan: check neighbour table for SLAACJosua Mayer
Like any IPv6 capable device, 6LNs can have multiple addresses assigned using SLAAC and made known through neighbour advertisements. After checking the destination address against all peers link-local addresses, consult the neighbour cache for additional known addresses. RFC7668 defines the scope of Neighbor Advertisements in Section 3.2.3: 1. "A Bluetooth LE 6LN MUST NOT register its link-local address" 2. "A Bluetooth LE 6LN MUST register its non-link-local addresses with the 6LBR by sending Neighbor Solicitation (NS) messages ..." Due to these constranits both the link-local addresses tracked in the list of 6lowpan peers, and the neighbour cache have to be used when identifying the 6lowpan peer for a destination address. Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by: Michael Scott <mike@foundries.io> Signed-off-by: Josua Mayer <josua.mayer@jm0.eu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: 6lowpan: search for destination address in all peersJosua Mayer
Handle overlooked case where the target address is assigned to a peer and neither route nor gateway exist. For one peer, no checks are performed to see if it is meant to receive packets for a given address. As soon as there is a second peer however, checks are performed to deal with routes and gateways for handling complex setups with multiple hops to a target address. This logic assumed that no route and no gateway imply that the destination address can not be reached, which is false in case of a direct peer. Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by: Michael Scott <mike@foundries.io> Signed-off-by: Josua Mayer <josua.mayer@jm0.eu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Add SMP workaround Microsoft Surface Precision Mouse bugSzymon Janc
Microsoft Surface Precision Mouse provides bogus identity address when pairing. It connects with Static Random address but provides Public Address in SMP Identity Address Information PDU. Address has same value but type is different. Workaround this by dropping IRK if ID address discrepancy is detected. > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 75 Role: Master (0x00) Peer address type: Random (0x01) Peer address: E0:52:33:93:3B:21 (Static) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x00 .... > ACL Data RX: Handle 75 flags 0x02 dlen 12 SMP: Identity Address Information (0x09) len 7 Address type: Public (0x00) Address: E0:52:33:93:3B:21 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Tested-by: Maarten Fonville <maarten.fonville@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199461 Cc: stable@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: L2CAP: Check bearer type on __l2cap_global_chan_by_addrLuiz Augusto von Dentz
The spec defines PSM and LE_PSM as different domains so a listen on the same PSM is valid if the address type points to a different bearer. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Use controller sets when availableLuiz Augusto von Dentz
This makes use of controller sets when using Extended Advertising feature thus offloading the scheduling to the controller. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: validate BLE connection interval updatescsonsino
Problem: The Linux Bluetooth stack yields complete control over the BLE connection interval to the remote device. The Linux Bluetooth stack provides access to the BLE connection interval min and max values through /sys/kernel/debug/bluetooth/hci0/ conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval. These values are used for initial BLE connections, but the remote device has the ability to request a connection parameter update. In the event that the remote side requests to change the connection interval, the Linux kernel currently only validates that the desired value is within the acceptable range in the Bluetooth specification (6 - 3200, corresponding to 7.5ms - 4000ms). There is currently no validation that the desired value requested by the remote device is within the min/max limits specified in the conn_min_interval/conn_max_interval configurations. This essentially leads to Linux yielding complete control over the connection interval to the remote device. The proposed patch adds a verification step to the connection parameter update mechanism, ensuring that the desired value is within the min/max bounds of the current connection. If the desired value is outside of the current connection min/max values, then the connection parameter update request is rejected and the negative response is returned to the remote device. Recall that the initial connection is established using the local conn_min_interval/conn_max_interval values, so this allows the Linux administrator to retain control over the BLE connection interval. The one downside that I see is that the current default Linux values for conn_min_interval and conn_max_interval typically correspond to 30ms and 50ms respectively. If this change were accepted, then it is feasible that some devices would no longer be able to negotiate to their desired connection interval values. This might be remedied by setting the default Linux conn_min_interval and conn_max_interval values to the widest supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same behavior as the current implementation, where the remote device could request to change the connection interval value to any value that is permitted by the Bluetooth specification, and Linux would accept the desired value. Signed-off-by: Carey Sonsino <csonsino@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Add support for LE ping featureSpoorthi Ravishankar Koppad
Changes made to add HCI Write Authenticated Payload timeout command for LE Ping feature. As per the Core Specification 5.0 Volume 2 Part E Section 7.3.94, the following code changes implements HCI Write Authenticated Payload timeout command for LE Ping feature. Signed-off-by: Spoorthi Ravishankar Koppad <spoorthix.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Check state in l2cap_disconnect_rspMatias Karhumaa
Because of both sides doing L2CAP disconnection at the same time, it was possible to receive L2CAP Disconnection Response with CID that was already freed. That caused problems if CID was already reused and L2CAP Connection Request with same CID was sent out. Before this patch kernel deleted channel context regardless of the state of the channel. Example where leftover Disconnection Response (frame #402) causes local device to delete L2CAP channel which was not yet connected. This in turn confuses remote device's stack because same CID is re-used without properly disconnecting. Btmon capture before patch: ** snip ** > ACL Data RX: Handle 43 flags 0x02 dlen 8 #394 [hci1] 10.748949 Channel: 65 len 4 [PSM 3 mode 0] {chan 2} RFCOMM: Disconnect (DISC) (0x43) Address: 0x03 cr 1 dlci 0x00 Control: 0x53 poll/final 1 Length: 0 FCS: 0xfd < ACL Data TX: Handle 43 flags 0x00 dlen 8 #395 [hci1] 10.749062 Channel: 65 len 4 [PSM 3 mode 0] {chan 2} RFCOMM: Unnumbered Ack (UA) (0x63) Address: 0x03 cr 1 dlci 0x00 Control: 0x73 poll/final 1 Length: 0 FCS: 0xd7 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #396 [hci1] 10.749073 L2CAP: Disconnection Request (0x06) ident 17 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #397 [hci1] 10.752391 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #398 [hci1] 10.753394 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #399 [hci1] 10.756499 L2CAP: Disconnection Request (0x06) ident 26 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #400 [hci1] 10.756548 L2CAP: Disconnection Response (0x07) ident 26 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #401 [hci1] 10.757459 L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 1 (0x0001) Source CID: 65 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #402 [hci1] 10.759148 L2CAP: Disconnection Response (0x07) ident 17 len 4 Destination CID: 65 Source CID: 65 = bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o.. 10.759447 > HCI Event: Number of Completed Packets (0x13) plen 5 #403 [hci1] 10.759386 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #404 [hci1] 10.760397 L2CAP: Connection Request (0x02) ident 27 len 4 PSM: 3 (0x0003) Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 16 #405 [hci1] 10.760441 L2CAP: Connection Response (0x03) ident 27 len 8 Destination CID: 65 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 43 flags 0x00 dlen 27 #406 [hci1] 10.760449 L2CAP: Configure Request (0x04) ident 19 len 19 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1013 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > HCI Event: Number of Completed Packets (0x13) plen 5 #407 [hci1] 10.761399 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 16 #408 [hci1] 10.762942 L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) *snip* Similar case after the patch: *snip* > ACL Data RX: Handle 43 flags 0x02 dlen 8 #22702 [hci0] 1664.411056 Channel: 65 len 4 [PSM 3 mode 0] {chan 3} RFCOMM: Disconnect (DISC) (0x43) Address: 0x03 cr 1 dlci 0x00 Control: 0x53 poll/final 1 Length: 0 FCS: 0xfd < ACL Data TX: Handle 43 flags 0x00 dlen 8 #22703 [hci0] 1664.411136 Channel: 65 len 4 [PSM 3 mode 0] {chan 3} RFCOMM: Unnumbered Ack (UA) (0x63) Address: 0x03 cr 1 dlci 0x00 Control: 0x73 poll/final 1 Length: 0 FCS: 0xd7 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22704 [hci0] 1664.411143 L2CAP: Disconnection Request (0x06) ident 11 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22705 [hci0] 1664.414009 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22706 [hci0] 1664.415007 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22707 [hci0] 1664.418674 L2CAP: Disconnection Request (0x06) ident 17 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22708 [hci0] 1664.418762 L2CAP: Disconnection Response (0x07) ident 17 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22709 [hci0] 1664.421073 L2CAP: Connection Request (0x02) ident 12 len 4 PSM: 1 (0x0001) Source CID: 65 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22710 [hci0] 1664.421371 L2CAP: Disconnection Response (0x07) ident 11 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22711 [hci0] 1664.424082 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22712 [hci0] 1664.425040 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22713 [hci0] 1664.426103 L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 3 (0x0003) Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 16 #22714 [hci0] 1664.426186 L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 43 flags 0x00 dlen 27 #22715 [hci0] 1664.426196 L2CAP: Configure Request (0x04) ident 13 len 19 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1013 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 43 flags 0x02 dlen 16 #22716 [hci0] 1664.428804 L2CAP: Connection Response (0x03) ident 12 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) *snip* Fix is to check that channel is in state BT_DISCONN before deleting the channel. This bug was found while fuzzing Bluez's OBEX implementation using Synopsys Defensics. Reported-by: Matti Kamunen <matti.kamunen@synopsys.com> Reported-by: Ari Timonen <ari.timonen@synopsys.com> Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hidp: NUL terminate a string in the compat ioctlDan Carpenter
This change is similar to commit a1616a5ac99e ("Bluetooth: hidp: fix buffer overflow") but for the compat ioctl. We take a string from the user and forgot to ensure that it's NUL terminated. I have also changed the strncpy() in to strscpy() in hidp_setup_hid(). The difference is the strncpy() doesn't necessarily NUL terminate the destination string. Either change would fix the problem but it's nice to take a belt and suspenders approach and do both. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Add new 13d3:3491 QCA_ROME deviceJoão Paulo Rechi Vita
Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3491 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Add new 13d3:3501 QCA_ROME deviceJoão Paulo Rechi Vita
Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3501 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_bcsp: Fix memory leak in rx_skbTomas Bortoli
Syzkaller found that it is possible to provoke a memory leak by never freeing rx_skb in struct bcsp_struct. Fix by freeing in bcsp_close() Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+98162c885993b72f19c4@syzkaller.appspotmail.com Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth:: btrtl: Add support for RTL8723DULarry Finger
This device is functionally equivalent to the BT part of the RTL8723DE, uses the same firmware, but the LMP subversion and HCI revision are unique. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btmtkuart: add an implementation for clock osc propertySean Wang
Some board requires explicitily control external osscilator via GPIO. So, add an implementation of a clock property for an external oscillator to the device. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btmtkuart: add an implementation for boot-gpios propertySean Wang
Not every platform has the pinctrl device integrates the GPIO the function such as MT7621 whose pinctrl and GPIO are separate hardware so the driver adds additional boot-gpios to let the MT766[3,8]U can enter the proper boot mode by gpiod for such platform. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06dt-bindings: net: bluetooth: add clock property to UART-based deviceSean Wang
Some board requires explicitily control external osscilator via GPIO. So, add a clock property for an external oscillator for the device. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06dt-bindings: net: bluetooth: add boot-gpios property to UART-based deviceSean Wang
Not every platform has the pinctrl device integrates the GPIO the function such as MT7621 whose pinctrl and GPIO are separate hardware so adding an additional boot-gpios property for such platform allows them to bring up the device. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btbcm: Add entry for BCM4359C0 UART bluetoothNeil Armstrong
The BCM4359C0 BT/Wi-Fi compo chip needs an entry to be discovered by the btbcm driver. Tested using an AP6398S module from Ampak. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06dt-bindings: net: bluetooth: Add device property firmware-name for QCA6174Rocky Liao
This patch adds an optional device property "firmware-name" to allow the driver to load customized nvm firmware file based on this property. Signed-off-by: Rocky Liao <rjliao@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_qca: Load customized NVM based on the device propertyRocky Liao
QCA BTSOC NVM is a customized firmware file and different vendors may want to have different BTSOC configuration (e.g. Configure SCO over PCM or I2S, Setting Tx power, etc.) via this file. This patch will allow vendors to download different NVM firmware file by reading a device property "firmware-name". Signed-off-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_mrvl: Add serdev supportSascha Hauer
This adds serdev support to the Marvell hci uart driver. Only basic serdev support, none of the fancier features like regulator or enable GPIO support is added for now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_mrvl: Wait for final ack before switching baudrateSascha Hauer
For the Marvell HCI UART we have to upload two firmware files. The first one is only for switching the baudrate of the device to a higher baudrate. After the baudrate switching firmware has been uploaded the device waits for a final ack (0x5a) before actually switching the baudrate. To send this final ack with the old baudrate give the hci ldisc workqueue a chance to run before switching the baudrate. Without this the final ack will never be received by the device and firmware upload fails. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_ldisc: Add function to wait for characters to be sentSascha Hauer
The hci UART line discipline sends its characters in a workqueue. Some devices like the Marvell Bluetooth chips need to make sure that all queued characters are sent before switching the baudrate. This adds a function to synchronize with the workqueue. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-066lowpan: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because we don't care if debugfs works or not, this trickles back a bit so we can clean things up by making some functions return void instead of an error value that is never going to fail. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor eventMatthias Kaehlcke
Firmware download to the WCN3990 often fails with a 'TLV response size mismatch' error: [ 133.064659] Bluetooth: hci0: setting up wcn3990 [ 133.489150] Bluetooth: hci0: QCA controller version 0x02140201 [ 133.495245] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv [ 133.507214] Bluetooth: hci0: QCA TLV response size mismatch [ 133.513265] Bluetooth: hci0: QCA Failed to download patch (-84) This is caused by a vendor event that corresponds to an earlier command to change the baudrate. The event is not processed in the context of the baudrate change and is later interpreted as response to the firmware download command (which is also a vendor command), but the driver detects that the event doesn't have the expected amount of associated data. More details: For the WCN3990 the vendor command for a baudrate change isn't sent as synchronous HCI command, because the controller sends the corresponding vendor event with the new baudrate. The event is received and decoded after the baudrate change of the host port. Identify the 'unused' event when it is received and don't add it to the queue of RX frames. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btqca: inject command complete event during fw downloadBalakrishna Godavarthi
Latest qualcomm chips are not sending an command complete event for every firmware packet sent to chip. They only respond with a vendor specific event for the last firmware packet. This optimization will decrease the BT ON time. Due to this we are seeing a timeout error message logs on the console during firmware download. Now we are injecting a command complete event once we receive an vendor specific event for the last RAM firmware packet. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Cleanup formatting and coding styleFabian Schindlatz
Fix some warnings and one error reported by checkpatch.pl: - lines longer than 80 characters are wrapped - empty lines inserted to separate variable declarations from the actual code - line break inserted after if (...) Co-developed-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de> Cc: linux-kernel@i4.cs.fau.de Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-10 04:53:12 +0000