summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-16Linux 5.2-rc5v5.2-rc5Linus Torvalds
2019-06-16Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "The accumulated fixes from this and last week: - Fix vmalloc TLB flush and map range calculations which lead to stale TLBs, spurious faults and other hard to diagnose issues. - Use fault_in_pages_writable() for prefaulting the user stack in the FPU code as it's less fragile than the current solution - Use the PF_KTHREAD flag when checking for a kernel thread instead of current->mm as the latter can give the wrong answer due to use_mm() - Compute the vmemmap size correctly for KASLR and 5-Level paging. Otherwise this can end up with a way too small vmemmap area. - Make KASAN and 5-level paging work again by making sure that all invalid bits are masked out when computing the P4D offset. This worked before but got broken recently when the LDT remap area was moved. - Prevent a NULL pointer dereference in the resource control code which can be triggered with certain mount options when the requested resource is not available. - Enforce ordering of microcode loading vs. perf initialization on secondary CPUs. Otherwise perf tries to access a non-existing MSR as the boot CPU marked it as available. - Don't stop the resource control group walk early otherwise the control bitmaps are not updated correctly and become inconsistent. - Unbreak kgdb by returning 0 on success from kgdb_arch_set_breakpoint() instead of an error code. - Add more Icelake CPU model defines so depending changes can be queued in other trees" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback x86/kasan: Fix boot with 5-level paging and KASAN x86/fpu: Don't use current->mm to check for a kthread x86/kgdb: Return 0 from kgdb_arch_set_breakpoint() x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled x86/resctrl: Don't stop walking closids when a locksetup group is found x86/fpu: Update kernel's FPU state before using for the fsave header x86/mm/KASLR: Compute the size of the vmemmap section properly x86/fpu: Use fault_in_pages_writeable() for pre-faulting x86/CPU: Add more Icelake model numbers mm/vmalloc: Avoid rare case of flushing TLB with weird arguments mm/vmalloc: Fix calculation of direct map addr range
2019-06-16Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A set of small fixes: - Repair the ktime_get_coarse() functions so they actually deliver what they are supposed to: tick granular time stamps. The current code missed to add the accumulated nanoseconds part of the timekeeper so the resulting granularity was 1 second. - Prevent the tracer from infinitely recursing into time getter functions in the arm architectured timer by marking these functions notrace - Fix a trivial compiler warning caused by wrong qualifier ordering" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Repair ktime_get_coarse*() granularity clocksource/drivers/arm_arch_timer: Don't trace count reader functions clocksource/drivers/timer-ti-dm: Change to new style declaration
2019-06-16Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two small fixes for RAS: - Use a proper search algorithm to find the correct element in the CEC array. The replacement was a better choice than fixing the crash causes by the original search function with horrible duct tape. - Move the timer based decay function into thread context so it can actually acquire the mutex which protects the CEC array to prevent corruption" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: RAS/CEC: Convert the timer callback to a workqueue RAS/CEC: Fix binary search function
2019-06-16net/mlx5: Expose eswitch encap modeMaor Gottlieb
Add API to get the current Eswitch encap mode. It will be used in downstream patches to check if flow table can be created with encap support or not. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com>
2019-06-16net/mlx5: Declare more strictly devlink encap modeLeon Romanovsky
Devlink has UAPI declaration for encap mode, so there is no need to be loose on the data get/set by drivers. Update call sites to use enum devlink_eswitch_encap_mode instead of plain u8. Suggested-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Petr Vorel <pvorel@suse.cz>
2019-06-15tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()Eric Dumazet
If mtu probing is enabled tcp_mtu_probing() could very well end up with a too small MSS. Use the new sysctl tcp_min_snd_mss to make sure MSS search is performed in an acceptable range. CVE-2019-11479 -- tcp mss hardcoded to 48 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15tcp: add tcp_min_snd_mss sysctlEric Dumazet
Some TCP peers announce a very small MSS option in their SYN and/or SYN/ACK messages. This forces the stack to send packets with a very high network/cpu overhead. Linux has enforced a minimal value of 48. Since this value includes the size of TCP options, and that the options can consume up to 40 bytes, this means that each segment can include only 8 bytes of payload. In some cases, it can be useful to increase the minimal value to a saner value. We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility reasons. Note that TCP_MAXSEG socket option enforces a minimal value of (TCP_MIN_MSS). David Miller increased this minimal value in commit c39508d6f118 ("tcp: Make TCP_MAXSEG minimum more correct.") from 64 to 88. We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS. CVE-2019-11479 -- tcp mss hardcoded to 48 Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15tcp: tcp_fragment() should apply sane memory limitsEric Dumazet
Jonathan Looney reported that a malicious peer can force a sender to fragment its retransmit queue into tiny skbs, inflating memory usage and/or overflow 32bit counters. TCP allows an application to queue up to sk_sndbuf bytes, so we need to give some allowance for non malicious splitting of retransmit queue. A new SNMP counter is added to monitor how many times TCP did not allow to split an skb if the allowance was exceeded. Note that this counter might increase in the case applications use SO_SNDBUF socket option to lower sk_sndbuf. CVE-2019-11478 : tcp_fragment, prevent fragmenting a packet when the socket is already using more than half the allowed space Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15tcp: limit payload size of sacked skbsEric Dumazet
Jonathan Looney reported that TCP can trigger the following crash in tcp_shifted_skb() : BUG_ON(tcp_skb_pcount(skb) < pcount); This can happen if the remote peer has advertized the smallest MSS that linux TCP accepts : 48 An skb can hold 17 fragments, and each fragment can hold 32KB on x86, or 64KB on PowerPC. This means that the 16bit witdh of TCP_SKB_CB(skb)->tcp_gso_segs can overflow. Note that tcp_sendmsg() builds skbs with less than 64KB of payload, so this problem needs SACK to be enabled. SACK blocks allow TCP to coalesce multiple skbs in the retransmit queue, thus filling the 17 fragments to maximal capacity. CVE-2019-11477 -- u16 overflow of TCP_SKB_CB(skb)->tcp_gso_segs Fixes: 832d11c5cd07 ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2019-06-15 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix stack layout of JITed x64 bpf code, from Alexei. 2) fix out of bounds memory access in bpf_sk_storage, from Arthur. 3) fix lpm trie walk, from Jonathan. 4) fix nested bpf_perf_event_output, from Matt. 5) and several other fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15Revert "net: phylink: set the autoneg state in phylink_phy_change"David S. Miller
This reverts commit ef7bfa84725d891bbdb88707ed55b2cbf94942bb. Russell King espressed some strong opposition to this change, explaining that this is trying to make phylink behave outside of how it has been designed. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15bpf: fix nested bpf tracepoints with per-cpu dataMatt Mullins
BPF_PROG_TYPE_RAW_TRACEPOINTs can be executed nested on the same CPU, as they do not increment bpf_prog_active while executing. This enables three levels of nesting, to support - a kprobe or raw tp or perf event, - another one of the above that irq context happens to call, and - another one in nmi context (at most one of which may be a kprobe or perf event). Fixes: 20b9d7ac4852 ("bpf: avoid excessive stack usage for perf_sample_data") Signed-off-by: Matt Mullins <mmullins@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-15bpf: Fix out of bounds memory access in bpf_sk_storageArthur Fabre
bpf_sk_storage maps use multiple spin locks to reduce contention. The number of locks to use is determined by the number of possible CPUs. With only 1 possible CPU, bucket_log == 0, and 2^0 = 1 locks are used. When updating elements, the correct lock is determined with hash_ptr(). Calling hash_ptr() with 0 bits is undefined behavior, as it does: x >> (64 - bits) Using the value results in an out of bounds memory access. In my case, this manifested itself as a page fault when raw_spin_lock_bh() is called later, when running the self tests: ./tools/testing/selftests/bpf/test_verifier 773 775 [ 16.366342] BUG: unable to handle page fault for address: ffff8fe7a66f93f8 Force the minimum number of locks to two. Signed-off-by: Arthur Fabre <afabre@cloudflare.com> Fixes: 6ac99e8f23d4 ("bpf: Introduce bpf sk local storage") Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-15net: sched: remove NET_CLS_IND config optionJiri Pirko
This config option makes only couple of lines optional. Two small helpers and an int in couple of cls structs. Remove the config option and always compile this in. This saves the user from unexpected surprises when he adds a filter with ingress device match which is silently ignored in case the config option is not set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15r8169: improve handling of Abit Fatal1ty F-190HDHeiner Kallweit
The Abit Fatal1ty F-190HD has a PCI ID quirk and the entry marks this board as not GBit-capable, what is wrong. According to [0] the board has a RTL8111B that is GBit-capable, therefore remove the RTL_CFG_NO_GBIT flag. [0] https://www.centos.org/forums/viewtopic.php?t=23390 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15vsock/virtio: set SOCK_DONE on peer shutdownStephen Barber
Set the SOCK_DONE flag to match the TCP_CLOSING state when a peer has shut down and there is nothing left to read. This fixes the following bug: 1) Peer sends SHUTDOWN(RDWR). 2) Socket enters TCP_CLOSING but SOCK_DONE is not set. 3) read() returns -ENOTCONN until close() is called, then returns 0. Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15net: stmmac: Fix wrapper drivers not detecting PHYJose Abreu
Because of PHYLINK conversion we stopped parsing the phy-handle property from DT. Unfortunatelly, some wrapper drivers still rely on this phy node to configure the PHY. Let's restore the parsing of PHY handle while these wrapper drivers are not fully converted to PHYLINK. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15Merge branch 'Reuse-ptp_qoriq-driver-for-dpaa2-ptp'David S. Miller
Yangbo Lu says: ==================== Reuse ptp_qoriq driver for dpaa2-ptp Although dpaa2-ptp.c driver is a fsl_mc_driver which is using MC APIs for register accessing, it's same IP block with eTSEC/DPAA/ENETC 1588 timer. This patch-set is to convert to reuse ptp_qoriq driver by using register ioremap and dropping related MC APIs. However the interrupts could only be handled by MC which fires MSIs to ARM cores. So the interrupt enabling and handling still rely on MC APIs. MC APIs for interrupt and PPS event support are also added by this patch-set. --- Changes for v2: - Allowed to compile with COMPILE_TEST. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15MAINTAINERS: maintain DPAA2 PTP driver in QorIQ PTP entryYangbo Lu
Maintain DPAA2 PTP driver in QorIQ PTP entry. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15dpaa2-ptp: add interrupt supportYangbo Lu
This patch is to add interrupt support for dpaa2 ptp clock, including MC APIs and PPS interrupt support. Other events haven't been supported in MC by now. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15arm64: dts: fsl: add ptp timer node for dpaa2 platformsYangbo Lu
This patch is to add ptp timer device tree node for dpaa2 platforms(ls1088a/ls208xa/lx2160a). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15dt-binding: ptp_qoriq: support DPAA2 PTP compatibleYangbo Lu
Add a new compatible for DPAA2 PTP. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15dpaa2-ptp: reuse ptp_qoriq driverYangbo Lu
Although dpaa2-ptp.c driver is a fsl_mc_driver which is using MC APIs for register accessing, it's same IP block with eTSEC/DPAA/ENETC 1588 timer. This patch is to convert to reuse ptp_qoriq driver by using register ioremap and dropping related MC APIs. However the interrupts could only be handled by MC which fires MSIs to ARM cores. So the interrupt enabling and handling still rely on MC APIs. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15ptp: add QorIQ PTP support for DPAA2Yangbo Lu
This patch is to add QorIQ PTP support for DPAA2. Although dpaa2-ptp.c driver is a fsl_mc_driver which is using MC APIs for register accessing, it's same IP block with eTSEC/DPAA/ENETC 1588 timer. We will convert to reuse ptp_qoriq driver by using register ioremap and dropping related MC APIs. Also allow to compile ptp_qoriq with COMPILE_TEST. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15net: dsa: rtl8366: Fix up VLAN filteringLinus Walleij
We get this regression when using RTL8366RB as part of a bridge with OpenWrt: WARNING: CPU: 0 PID: 1347 at net/switchdev/switchdev.c:291 switchdev_port_attr_set_now+0x80/0xa4 lan0: Commit of attribute (id=7) failed. (...) realtek-smi switch lan0: failed to initialize vlan filtering on this port This is because it is trying to disable VLAN filtering on VLAN0, as we have forgot to add 1 to the port number to get the right VLAN in rtl8366_vlan_filtering(): when we initialize the VLAN we associate VLAN1 with port 0, VLAN2 with port 1 etc, so we need to add 1 to the port offset. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15hinic: Use devm_kasprintf instead of hard coding itChristophe JAILLET
'devm_kasprintf' is less verbose than: snprintf(NULL, 0, ...); devm_kzalloc(...); sprintf so use it instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15Revert "net: dsa: mv88e6xxx: do not flood CPU with unknown multicast"David S. Miller
This reverts commit 422efd032775757c41e9579facd9656a87bf4f00. It breaks ipv6. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15net: phylink: set the autoneg state in phylink_phy_changeIoana Ciornei
The phy_state field of phylink should carry only valid information especially when this can be passed to the .mac_config callback. Update the an_enabled field with the autoneg state in the phylink_phy_change function. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15net: dsa: mv88e6xxx: do not flood CPU with unknown multicastVivien Didelot
The DSA ports must flood unknown unicast and multicast, but the switch must not flood the CPU ports with unknown multicast, as this results in a lot of undesirable traffic that the network stack needs to filter in software. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15Merge tag 'platform-drivers-x86-v5.2-3' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: - fix a couple of Mellanox driver enumeration issues - fix ASUS laptop regression with backlight - fix Dell computers that got a wrong mode (tablet versus laptop) after resume * tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86: platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration platform/x86: intel-vbtn: Report switch events when event wakes device platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
2019-06-15Merge tag 'usb-5.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 5.2-rc5 Nothing major, just some small gadget fixes, usb-serial new device ids, a few new quirks, and some small fixes for some regressions that have been found after the big 5.2-rc1 merge. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: Make sure an alt mode exist before getting its partner usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe() usb: gadget: dwc2: fix zlp handling usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i] usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init() usb: dwc2: Fix DMA cache alignment issues usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression) USB: Fix chipmunk-like voice when using Logitech C270 for recording audio. USB: usb-storage: Add new ID to ums-realtek usb: typec: ucsi: ccg: fix memory leak in do_flash USB: serial: option: add Telit 0x1260 and 0x1261 compositions USB: serial: pl2303: add Allied Telesis VT-Kit3 USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
2019-06-15Merge tag 'powerpc-5.2-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a regression introduced by our 32-bit KASAN support, which broke booting on machines with "bootx" early debugging enabled. A fix for a bug which broke kexec on 32-bit, introduced by changes to the 32-bit STRICT_KERNEL_RWX support in v5.1. Finally two fixes going to stable for our THP split/collapse handling, discovered by Nick. The first fixes random crashes and/or corruption in guests under sufficient load. Thanks to: Nicholas Piggin, Christophe Leroy, Aaro Koskinen, Mathieu Malaterre" * tag 'powerpc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate() powerpc/64s: Fix THP PMD collapse serialisation powerpc: Fix kexec failure on book3s/32
2019-06-15Merge tag 'trace-v5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Out of range read of stack trace output - Fix for NULL pointer dereference in trace_uprobe_create() - Fix to a livepatching / ftrace permission race in the module code - Fix for NULL pointer dereference in free_ftrace_func_mapper() - A couple of build warning clean ups * tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper() module: Fix livepatch/ftrace module text permissions race tracing/uprobe: Fix obsolete comment on trace_uprobe_create() tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create() tracing: Make two symbols static tracing: avoid build warning with HAVE_NOP_MCOUNT tracing: Fix out-of-range read in trace_stack_print()
2019-06-16powerpc/32: fix build failure on book3e with KVMChristophe Leroy
Build failure was introduced by the commit identified below, due to missed macro expension leading to wrong called function's name. arch/powerpc/kernel/head_fsl_booke.o: In function `SystemCall': arch/powerpc/kernel/head_fsl_booke.S:416: undefined reference to `kvmppc_handler_BOOKE_INTERRUPT_SYSCALL_SPRN_SRR1' Makefile:1052: recipe for target 'vmlinux' failed The called function should be kvmppc_handler_8_0x01B(). This patch fixes it. Reported-by: Paul Mackerras <paulus@ozlabs.org> Fixes: 1a4b739bbb4f ("powerpc/32: implement fast entry for syscalls on BOOKE") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-15powerpc/booke: fix fast syscall entry on SMPChristophe Leroy
Use r10 instead of r9 to calculate CPU offset as r9 contains the value from SRR1 which is used later. Fixes: 1a4b739bbb4f ("powerpc/32: implement fast entry for syscalls on BOOKE") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-15powerpc/32s: fix initial setup of segment registers on secondary CPUChristophe Leroy
The patch referenced below moved the loading of segment registers out of load_up_mmu() in order to do it earlier in the boot sequence. However, the secondary CPU still needs it to be done when loading up the MMU. Reported-by: Erhard F. <erhard_f@mailbox.org> Fixes: 215b823707ce ("powerpc/32s: set up an early static hash table for KASAN") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-15x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callbackBorislav Petkov
Adric Blake reported the following warning during suspend-resume: Enabling non-boot CPUs ... x86: Booting SMP configuration: smpboot: Booting Node 0 Processor 1 APIC 0x2 unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0000000000000000) \ at rIP: 0xffffffff8d267924 (native_write_msr+0x4/0x20) Call Trace: intel_set_tfa intel_pmu_cpu_starting ? x86_pmu_dead_cpu x86_pmu_starting_cpu cpuhp_invoke_callback ? _raw_spin_lock_irqsave notify_cpu_starting start_secondary secondary_startup_64 microcode: sig=0x806ea, pf=0x80, revision=0x96 microcode: updated to revision 0xb4, date = 2019-04-01 CPU1 is up The MSR in question is MSR_TFA_RTM_FORCE_ABORT and that MSR is emulated by microcode. The log above shows that the microcode loader callback happens after the PMU restoration, leading to the conjecture that because the microcode hasn't been updated yet, that MSR is not present yet, leading to the #GP. Add a microcode loader-specific hotplug vector which comes before the PERF vectors and thus executes earlier and makes sure the MSR is present. Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort") Reported-by: Adric Blake <promarbler14@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: x86@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=203637
2019-06-14Merge branch 'for-5.2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "This has an unusually high density of tricky fixes: - task_get_css() could deadlock when it races against a dying cgroup. - cgroup.procs didn't list thread group leaders with live threads. This could mislead readers to think that a cgroup is empty when it's not. Fixed by making PROCS iterator include dead tasks. I made a couple mistakes making this change and this pull request contains a couple follow-up patches. - When cpusets run out of online cpus, it updates cpusmasks of member tasks in bizarre ways. Joel improved the behavior significantly" * 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: restore sanity to cpuset_cpus_allowed_fallback() cgroup: Fix css_task_iter_advance_css_set() cset skip condition cgroup: css_task_iter_skip()'d iterators must be advanced before accessed cgroup: Include dying leaders with live threads in PROCS iterations cgroup: Implement css_task_iter_skip() cgroup: Call cgroup_release() before __exit_signal() docs cgroups: add another example size for hugetlb cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()
2019-06-14Merge tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Daniel Vetter: "Nothing unsettling here, also not aware of anything serious still pending. The edid override regression fix took a bit longer since this seems to be an area with an overabundance of bad options. But the fix we have now seems like a good path forward. Next week it should be back to Dave. Summary: - fix regression on amdgpu on SI - fix edid override regression - driver fixes: amdgpu, i915, mediatek, meson, panfrost - fix writecombine for vmap in gem-shmem helper (used by panfrost) - add more panel quirks" * tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drm: (25 commits) drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported() drm: add fallback override/firmware EDID modes workaround drm/edid: abstract override/firmware EDID retrieval drm/i915/perf: fix whitelist on Gen10+ drm/i915/sdvo: Implement proper HDMI audio support for SDVO drm/i915: Fix per-pixel alpha with CCS drm/i915/dmc: protect against reading random memory drm/i915/dsi: Use a fuzzy check for burst mode clock check drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc drm/panfrost: Require the simple_ondemand governor drm/panfrost: make devfreq optional again drm/gem_shmem: Use a writecombine mapping for ->vaddr drm: panel-orientation-quirks: Add quirk for GPD MicroPC drm: panel-orientation-quirks: Add quirk for GPD pocket2 drm/meson: fix G12A primary plane disabling drm/meson: fix primary plane disabling drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variations drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable() drm/mediatek: clear num_pipes when unbind driver ...
2019-06-14Merge tag 'gfs2-v5.2.fixes2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: "Fix rounding error in gfs2_iomap_page_prepare" * tag 'gfs2-v5.2.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix rounding error in gfs2_iomap_page_prepare
2019-06-14Merge branch 'net-dsa-use-switchdev-attr-and-obj-handlers'David S. Miller
Vivien Didelot says: ==================== net: dsa: use switchdev attr and obj handlers This series reduces boilerplate in the handling of switchdev attribute and object operations by using the switchdev_handle_* helpers, which check the targeted devices and recurse into their lower devices. This also brings back the ability to inspect operations targeting the bridge device itself (where .orig_dev and .dev were originally the bridge device), even though that is of no use yet and skipped by this series. Changes in v2: Only VLAN and (non-host) MDB objects not directly targeting the slave device are unsupported at the moment, so only skip these cases. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: dsa: use switchdev handle helpersVivien Didelot
Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: dsa: make dsa_slave_dev_check use constVivien Didelot
The switchdev handle helpers make use of a device checking helper requiring a const net_device. Make dsa_slave_dev_check compliant to this. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: dsa: make cpu_dp non constVivien Didelot
A port may trigger operations on its dedicated CPU port, so using cpu_dp as const will raise warnings. Make cpu_dp non const. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: dsa: do not check orig_dev in vlan delVivien Didelot
The current DSA code handling switchdev objects does not recurse into the lower devices thus is never called with an orig_dev member being a bridge device, hence remove this useless check. At the same time, remove the comments about the callers, which is unlikely to be updated if the code changes and thus will be confusing. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge branch 'tcp-add-three-static-keys'David S. Miller
Eric Dumazet says: ==================== tcp: add three static keys Recent addition of per TCP socket rx/tx cache brought regressions for some workloads, as reported by Feng Tang. It seems better to make them opt-in, before we adopt better heuristics. The last patch adds high_order_alloc_disable sysctl to ask TCP sendmsg() to exclusively use order-0 allocations, as mm layer has specific optimizations. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: add high_order_alloc_disable sysctl/static keyEric Dumazet
>From linux-3.7, (commit 5640f7685831 "net: use a per task frag allocator") TCP sendmsg() has preferred using order-3 allocations. While it gives good results for most cases, we had reports that heavy uses of TCP over loopback were hitting a spinlock contention in page allocations/freeing. This commits adds a sysctl so that admins can opt-in for order-0 allocations. Hopefully mm layer might optimize order-3 allocations in the future since it could give us a nice boost (see 8 lines of following benchmark) The following benchmark shows a win when more than 8 TCP_STREAM threads are running (56 x86 cores server in my tests) for thr in {1..30} do sysctl -wq net.core.high_order_alloc_disable=0 T0=`./super_netperf $thr -H 127.0.0.1 -l 15` sysctl -wq net.core.high_order_alloc_disable=1 T1=`./super_netperf $thr -H 127.0.0.1 -l 15` echo $thr:$T0:$T1 done 1: 49979: 37267 2: 98745: 76286 3: 141088: 110051 4: 177414: 144772 5: 197587: 173563 6: 215377: 208448 7: 241061: 234087 8: 267155: 263373 9: 295069: 297402 10: 312393: 335213 11: 340462: 368778 12: 371366: 403954 13: 412344: 443713 14: 426617: 473580 15: 474418: 507861 16: 503261: 538539 17: 522331: 563096 18: 532409: 567084 19: 550824: 605240 20: 525493: 641988 21: 564574: 665843 22: 567349: 690868 23: 583846: 710917 24: 588715: 736306 25: 603212: 763494 26: 604083: 792654 27: 602241: 796450 28: 604291: 797993 29: 611610: 833249 30: 577356: 841062 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14tcp: add tcp_tx_skb_cache sysctlEric Dumazet
Feng Tang reported a performance regression after introduction of per TCP socket tx/rx caches, for TCP over loopback (netperf) There is high chance the regression is caused by a change on how well the 32 KB per-thread page (current->task_frag) can be recycled, and lack of pcp caches for order-3 pages. I could not reproduce the regression myself, cpus all being spinning on the mm spinlocks for page allocs/freeing, regardless of enabling or disabling the per tcp socket caches. It seems best to disable the feature by default, and let admins enabling it. MM layer either needs to provide scalable order-3 pages allocations, or could attempt a trylock on zone->lock if the caller only attempts to get a high-order page and is able to fallback to order-0 ones in case of pressure. Tests run on a 56 cores host (112 hyper threads) - 35.49% netperf [kernel.vmlinux] [k] queued_spin_lock_slowpath - 35.49% queued_spin_lock_slowpath - 18.18% get_page_from_freelist - __alloc_pages_nodemask - 18.18% alloc_pages_current skb_page_frag_refill sk_page_frag_refill tcp_sendmsg_locked tcp_sendmsg inet_sendmsg sock_sendmsg __sys_sendto __x64_sys_sendto do_syscall_64 entry_SYSCALL_64_after_hwframe __libc_send + 17.31% __free_pages_ok + 31.43% swapper [kernel.vmlinux] [k] intel_idle + 9.12% netperf [kernel.vmlinux] [k] copy_user_enhanced_fast_string + 6.53% netserver [kernel.vmlinux] [k] copy_user_enhanced_fast_string + 0.69% netserver [kernel.vmlinux] [k] queued_spin_lock_slowpath + 0.68% netperf [kernel.vmlinux] [k] skb_release_data + 0.52% netperf [kernel.vmlinux] [k] tcp_sendmsg_locked 0.46% netperf [kernel.vmlinux] [k] _raw_spin_lock_irqsave Fixes: 472c2e07eef0 ("tcp: add one skb cache for tx") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Feng Tang <feng.tang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14tcp: add tcp_rx_skb_cache sysctlEric Dumazet
Instead of relying on rps_needed, it is safer to use a separate static key, since we do not want to enable TCP rx_skb_cache by default. This feature can cause huge increase of memory usage on hosts with millions of sockets. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-18 13:44:36 +0000