summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-27nvmet: add metadata characteristics for a namespaceIsrael Rukshin
Fill those namespace fields from the block device format for adding metadata (T10-PI) over fabric support with block devices. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme-rdma: add metadata/T10-PI supportMax Gurtovoy
For capable HCAs (e.g. ConnectX-5/ConnectX-6) this will allow end-to-end protection information passthrough and validation for NVMe over RDMA transport. Metadata offload support was implemented over the new RDMA signature verbs API and it is enabled for capable controllers. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme-rdma: introduce nvme_rdma_sgl structureIsrael Rukshin
Remove first_sgl pointer from struct nvme_rdma_request and use pointer arithmetic instead. The inline scatterlist, if exists, will be located right after the nvme_rdma_request. This patch is needed as a preparation for adding PI support. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: introduce NVME_INLINE_METADATA_SG_CNTIsrael Rukshin
SGL size of metadata is usually small. Thus, 1 inline sg should cover most cases. The macro will be used for pre-allocate a single SGL entry for metadata. The preallocation of small inline SGLs depends on SG_CHAIN capability so if the ARCH doesn't support SG_CHAIN, use the runtime allocation for the SGL. This patch is a preparation for adding metadata (T10-PI) over fabric support. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: enforce extended LBA format for fabrics metadataMax Gurtovoy
An extended LBA is a larger LBA that is created when metadata associated with the LBA is transferred contiguously with the LBA data (AKA interleaved). The metadata may be either transferred as part of the LBA (creating an extended LBA) or it may be transferred as a separate contiguous buffer of data. According to the NVMeoF spec, a fabrics ctrl supports only an Extended LBA format. Fail revalidation in case we have a spec violation. Also add a flag that will imply on capable transports and controllers as part of a preparation for allowing end-to-end protection information for fabric controllers. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: introduce max_integrity_segments ctrl attributeMax Gurtovoy
This patch doesn't change any logic, and is needed as a preparation for adding PI support for fabrics drivers that will use an extended LBA format for metadata and will support more than 1 integrity segment. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: make nvme_ns_has_pi accessible to transportsJames Smart
Move the nvme_ns_has_pi() inline from core.c to the nvme.h header. This allows use by the transports. Signed-off-by: James Smart <jsmart2021@gmail.com> [maxg: added a comment for nvme_ns_has_pi()] Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: introduce NVME_NS_METADATA_SUPPORTED flagMax Gurtovoy
This is a preparation for adding support for metadata in fabric controllers. New flag will imply that NVMe namespace supports getting metadata that was originally generated by host's block layer. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: introduce namespace features flagMax Gurtovoy
Replace the specific ext boolean (that implies on extended LBA format) with a feature in the new namespace features flag. This is a preparation for adding more namespace features (such as metadata specific features). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27block: always define struct blk_integrity in genhd.hMax Gurtovoy
This will reduce the amount of ifdefs inside the source code for various drivers and also will reduce the amount of stub functions that were created for the !CONFIG_BLK_DEV_INTEGRITY case. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvmet: revalidate-ns & generate AEN from configfsChaitanya Kulkarni
Add a new attribute "revalidate_size" for the namespace which allows user to revalidate and generate the AEN if needed. This attribute is needed so that we can install userspace rules with systemd service based on inotify/fsnotify/uevent. The registered callback for such a service will end up writing to this attribute to generate AEN if needed. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvmet: generate AEN for ns revalidate size changeChaitanya Kulkarni
The newly added function nvmet_ns_revalidate() does update the ns size in the identify namespace in-core target data structure when host issues id-ns command. This can lead to host having inconsistencies between size of the namespace present in the id-ns command result and size of the corresponding block device until host scans the namespaces explicitly. To avoid this scenario generate AEN if old size is not same as the new one in nvmet_ns_revalidate(). This will allow automatic AEN generation when host calls id-ns command and also allows target to install userspace rules so that it can trigger nvmet_ns_revalidate() (using configfs interface with the help of next patch) resulting in appropriate AEN generation when underlying namespace size change is detected. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvmet: add helper to revalidate bdev and file nsChaitanya Kulkarni
This patch adds a wrapper helper to indicate size change in the bdev & file-backed namespace when revalidating ns. This helper is needed in order to minimize code repetition in the next patch for configfs.c and existing admin-cmd.c.   Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvmet: add async event tracing supportChaitanya Kulkarni
This adds a new tracepoint for the target to trace async event. This is helpful in debugging and comparing host and target side async events especially when host is connected to different targets on different machines and now that we rely on userspace components to generate AEN.  Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: delete an unnecessary declarationDan Carpenter
The nvme_put_ctrl() is implemented earlier as an inline function so this declaration isn't required. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: fix io_opt limit settingDamien Le Moal
Currently, a namespace io_opt queue limit is set by default to the physical sector size of the namespace and to the the write optimal size (NOWS) when the namespace reports optimal IO sizes. This causes problems with block limits stacking in blk_stack_limits() when a namespace block device is combined with an HDD which generally do not report any optimal transfer size (io_opt limit is 0). The code: /* Optimal I/O a multiple of the physical block size? */ if (t->io_opt & (t->physical_block_size - 1)) { t->io_opt = 0; t->misaligned = 1; ret = -1; } in blk_stack_limits() results in an error return for this function when the combined devices have different but compatible physical sector sizes (e.g. 512B sector SSD with 4KB sector disks). Fix this by not setting the optimal IO size queue limit if the namespace does not report an optimal write size value. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bart van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: disable streams when get stream params failedWu Bo
Disable streams again if getting the stream params fails. Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme-fc: print proper nvme-fc devloss_tmo valueMartin George
The nvme-fc devloss_tmo is computed as the min of either the ctrl_loss_tmo (max_retries * reconnect_delay) or the remote port's devloss_tmo. But what gets printed as the nvme-fc devloss_tmo in nvme_fc_reconnect_or_delete() is always the remote port's devloss_tmo value. So correct this by printing the min value instead. Signed-off-by: Martin George <marting@netapp.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme-pci: make sure write/poll_queues less or equal then cpu countWeiping Zhang
Check module parameter write/poll_queues before using it to catch too large values. Reproducer: modprobe -r nvme modprobe nvme write_queues=`nproc` echo $((`nproc`+1)) > /sys/module/nvme/parameters/write_queues echo 1 > /sys/block/nvme0n1/device/reset_controller [ 657.069000] ------------[ cut here ]------------ [ 657.069022] WARNING: CPU: 10 PID: 1163 at kernel/irq/affinity.c:390 irq_create_affinity_masks+0x47c/0x4a0 [ 657.069056] dm_region_hash dm_log dm_mod [ 657.069059] CPU: 10 PID: 1163 Comm: kworker/u193:9 Kdump: loaded Tainted: G W 5.6.0+ #8 [ 657.069060] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019 [ 657.069064] Workqueue: nvme-reset-wq nvme_reset_work [nvme] [ 657.069066] RIP: 0010:irq_create_affinity_masks+0x47c/0x4a0 [ 657.069067] Code: fe ff ff 48 c7 c0 b0 89 14 95 48 89 46 20 e9 e9 fb ff ff 31 c0 e9 90 fc ff ff 0f 0b 48 c7 44 24 08 00 00 00 00 e9 e9 fc ff ff <0f> 0b e9 87 fe ff ff 48 8b 7c 24 28 e8 33 a0 80 00 e9 b6 fc ff ff [ 657.069068] RSP: 0018:ffffb505ce1ffc78 EFLAGS: 00010202 [ 657.069069] RAX: 0000000000000060 RBX: ffff9b97921fe5c0 RCX: 0000000000000000 [ 657.069069] RDX: ffff9b67bad80000 RSI: 00000000ffffffa0 RDI: 0000000000000000 [ 657.069070] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9b97921fe718 [ 657.069070] R10: ffff9b97921fe710 R11: 0000000000000001 R12: 0000000000000064 [ 657.069070] R13: 0000000000000060 R14: 0000000000000000 R15: 0000000000000001 [ 657.069071] FS: 0000000000000000(0000) GS:ffff9b67c0880000(0000) knlGS:0000000000000000 [ 657.069072] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 657.069072] CR2: 0000559eac6fc238 CR3: 000000057860a002 CR4: 00000000007606e0 [ 657.069073] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 657.069073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 657.069073] PKRU: 55555554 [ 657.069074] Call Trace: [ 657.069080] __pci_enable_msix_range+0x233/0x5a0 [ 657.069085] ? kernfs_put+0xec/0x190 [ 657.069086] pci_alloc_irq_vectors_affinity+0xbb/0x130 [ 657.069089] nvme_reset_work+0x6e6/0xeab [nvme] [ 657.069093] ? __switch_to_asm+0x34/0x70 [ 657.069094] ? __switch_to_asm+0x40/0x70 [ 657.069095] ? nvme_irq_check+0x30/0x30 [nvme] [ 657.069098] process_one_work+0x1a7/0x370 [ 657.069101] worker_thread+0x1c9/0x380 [ 657.069102] ? max_active_store+0x80/0x80 [ 657.069103] kthread+0x112/0x130 [ 657.069104] ? __kthread_parkme+0x70/0x70 [ 657.069105] ret_from_fork+0x35/0x40 [ 657.069106] ---[ end trace f4f06b7d24513d06 ]--- [ 657.077110] nvme nvme0: 95/1/0 default/read/poll queues Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvmet-tcp: move send/recv error handling in the send/recv methods instead of ↵Sagi Grimberg
call-sites Have routines handle errors and just bail out of the poll loop. This simplifies the code and will help as we may enhance the poll loop logic and these are somewhat in the way. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvmet-tcp: set MSG_EOR if we send last payload in the batchSagi Grimberg
when trying to send the pdu data digest, we should set this flag. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvmet-tcp: set MSG_SENDPAGE_NOTLAST with MSG_MORE when we have more to sendSagi Grimberg
We can signal the stack that this is not the last page coming and the stack can build a larger tso segment, so go ahead and use it. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme-tcp: set MSG_SENDPAGE_NOTLAST with MSG_MORE when we have more to sendSagi Grimberg
We can signal the stack that this is not the last page coming and the stack can build a larger tso segment, so go ahead and use it. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvmet: mark nvmet_ana_state staticChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
2020-05-27nvmet: replace kstrndup() with kmemdup_nul()Chen Zhou
It is more efficient to use kmemdup_nul() if the size is known exactly. The doc in kernel: "Note: Use kmemdup_nul() instead if the size is known exactly." Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-26net: sctp: Fix spelling in Kconfig helpChris Packham
Change 'handeled' to 'handled' in the Kconfig help for SCTP. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26Merge branch 'bnxt_en-Bug-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: Bug fixes. 3 bnxt_en driver fixes, covering a bug in preserving the counters during some resets, proper error code when flashing NVRAM fails, and an endian bug when extracting the firmware response message length. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26bnxt_en: fix firmware message length endiannessEdwin Peer
The explicit mask and shift is not the appropriate way to parse fields out of a little endian struct. The length field is internally __le16 and the strategy employed only happens to work on little endian machines because the offset used is actually incorrect (length is at offset 6). Also remove the related and no longer used definitions from bnxt.h. Fixes: 845adfe40c2a ("bnxt_en: Improve valid bit checking in firmware response message.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26bnxt_en: Fix return code to "flash_device".Vasundhara Volam
When NVRAM directory is not found, return the error code properly as per firmware command failure instead of the hardcode -ENOBUFS. Fixes: 3a707bed13b7 ("bnxt_en: Return -EAGAIN if fw command returns BUSY") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26bnxt_en: Fix accumulation of bp->net_stats_prev.Michael Chan
We have logic to maintain network counters across resets by storing the counters in bp->net_stats_prev before reset. But not all resets will clear the counters. Certain resets that don't need to change the number of rings do not clear the counters. The current logic accumulates the counters before all resets, causing big jumps in the counters after some resets, such as ethtool -G. Fix it by only accumulating the counters during reset if the irq_re_init parameter is set. The parameter signifies that all rings and interrupts will be reset and that means that the counters will also be reset. Reported-by: Vijayendra Suman <vijayendra.suman@oracle.com> Fixes: b8875ca356f1 ("bnxt_en: Save ring statistics before reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net: usb: qmi_wwan: add Telit LE910C1-EUX compositionDaniele Palmas
Add support for Telit LE910C1-EUX composition 0x1031: tty, tty, tty, rmnet Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26hwmon: (amd_energy) Missing platform_driver_unregister() on error in ↵Wei Yongjun
amd_energy_init() Add the missing platform_driver_unregister() before return from amd_energy_init() in the error handling case. Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Naveen krishna Chatradhi <nchatrad@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200527022417.105620-1-weiyongjun1@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-26net: check untrusted gso_size at kernel entryWillem de Bruijn
Syzkaller again found a path to a kernel crash through bad gso input: a packet with gso size exceeding len. These packets are dropped in tcp_gso_segment and udp[46]_ufo_fragment. But they may affect gso size calculations earlier in the path. Now that we have thlen as of commit 9274124f023b ("net: stricter validation of untrusted gso packets"), check gso_size at entry too. Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26mptcp: avoid NULL-ptr derefence on fallbackPaolo Abeni
In the MPTCP receive path we must cope with TCP fallback on blocking recvmsg(). Currently in such code path we detect the fallback condition, but we don't fetch the struct socket required for fallback. The above allowed syzkaller to trigger a NULL pointer dereference: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 1 PID: 7226 Comm: syz-executor523 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:sock_recvmsg_nosec net/socket.c:886 [inline] RIP: 0010:sock_recvmsg+0x92/0x110 net/socket.c:904 Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 44 89 6c 24 04 e8 53 18 1d fb 4d 8d 6f 20 4c 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 ef e8 20 12 5b fb bd a0 00 00 00 49 03 6d RSP: 0018:ffffc90001077b98 EFLAGS: 00010202 RAX: 0000000000000004 RBX: ffffc90001077dc0 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffff86565e59 R09: ffffed10115afeaa R10: ffffed10115afeaa R11: 0000000000000000 R12: 1ffff9200020efbc R13: 0000000000000020 R14: ffffc90001077de0 R15: 0000000000000000 FS: 00007fc6a3abe700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004d0050 CR3: 00000000969f0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mptcp_recvmsg+0x18d5/0x19b0 net/mptcp/protocol.c:891 inet_recvmsg+0xf6/0x1d0 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:886 [inline] sock_recvmsg net/socket.c:904 [inline] __sys_recvfrom+0x2f3/0x470 net/socket.c:2057 __do_sys_recvfrom net/socket.c:2075 [inline] __se_sys_recvfrom net/socket.c:2071 [inline] __x64_sys_recvfrom+0xda/0xf0 net/socket.c:2071 do_syscall_64+0xf3/0x1b0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Address the issue initializing the struct socket reference before entering the fallback code. Reported-and-tested-by: syzbot+c6bfc3db991edc918432@syzkaller.appspotmail.com Suggested-by: Ondrej Mosnacek <omosnace@redhat.com> Fixes: 8ab183deb26a ("mptcp: cope with later TCP fallback") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26clk: qcom: gcc: Fix parent for gpll0_out_evenVinod Koul
Documentation says that gpll0 is parent of gpll0_out_even, somehow driver coded that as bi_tcxo, so fix it Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150") Reported-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20200521052728.2141377-1-vkoul@kernel.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: qcom: sm8250 gcc depends on QCOM_GDSCJonathan Marek
The driver will always fail to probe without QCOM_GDSC, so select it. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lkml.kernel.org/r/20200523040947.31946-1-jonathan@marek.ca Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10aFugang Duan
For rx filter 'HWTSTAMP_FILTER_PTP_V2_EVENT', it should be PTP v2/802.AS1, any layer, any kind of event packet, but HW only take timestamp snapshot for below PTP message: sync, Pdelay_req, Pdelay_resp. Then it causes below issue when test E2E case: ptp4l[2479.534]: port 1: received DELAY_REQ without timestamp ptp4l[2481.423]: port 1: received DELAY_REQ without timestamp ptp4l[2481.758]: port 1: received DELAY_REQ without timestamp ptp4l[2483.524]: port 1: received DELAY_REQ without timestamp ptp4l[2484.233]: port 1: received DELAY_REQ without timestamp ptp4l[2485.750]: port 1: received DELAY_REQ without timestamp ptp4l[2486.888]: port 1: received DELAY_REQ without timestamp ptp4l[2487.265]: port 1: received DELAY_REQ without timestamp ptp4l[2487.316]: port 1: received DELAY_REQ without timestamp Timestamp snapshot dependency on register bits in received path: SNAPTYPSEL TSMSTRENA TSEVNTENA PTP_Messages 01 x 0 SYNC, Follow_Up, Delay_Req, Delay_Resp, Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up 01 0 1 SYNC, Pdelay_Req, Pdelay_Resp For dwmac v5.10a, enabling all events by setting register DWC_EQOS_TIME_STAMPING[SNAPTYPSEL] to 2’b01, clearing bit [TSEVNTENA] to 0’b0, which can support all required events. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26Merge branch 'nexthop-group-fixes'David S. Miller
David Ahern says: ==================== nexthops: Fix 2 fundamental flaws with nexthop groups Nik's torture tests have exposed 2 fundamental mistakes with the initial nexthop code for groups. First, the nexthops entries and num_nh in the nh_grp struct should not be modified once the struct is set under rcu. Doing so has major affects on the datapath seeing valid nexthop entries. Second, the helpers in the header file were convenient for not repeating code, but they cause datapath walks to potentially see 2 different group structs after an rcu replace, disrupting a walk of the path objects. This second problem applies solely to IPv4 as I re-used too much of the existing code in walking legs of a multipath route. Patches 1 is refactoring change to simplify the overhead of reviewing and understanding the change in patch 2 which fixes the update of nexthop groups when a compnent leg is removed. Patches 3-5 address the second problem. Patch 3 inlines the multipath check such that the mpath lookup and subsequent calls all use the same nh_grp struct. Patches 4 and 5 fix datapath uses of fib_info_num_path with iterative calls to fib_info_nhc. fib_info_num_path can be used in control plane path in a 'for loop' with subsequent fib_info_nhc calls to get each leg since the nh_grp struct is only changed while holding the rtnl; the combination can not be used in the data plane with external nexthops as it involves repeated dereferences of nh_grp struct which can change between calls. Similarly, nexthop_is_multipath can be used for branching decisions in the datapath since the nexthop type can not be changed (a group can not be converted to standalone and vice versa). Patch set developed in coordination with Nikolay Aleksandrov. He did a lot of work creating a good reproducer, discussing options to fix it and testing iterations. I have adapted Nik's commands into additional tests in the nexthops selftest script which I will send against -next. v2 - fixed whitespace errors ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26ipv4: nexthop version of fib_info_nh_uses_devDavid Ahern
Similar to the last path, need to fix fib_info_nh_uses_dev for external nexthops to avoid referencing multiple nh_grp structs. Move the device check in fib_info_nh_uses_dev to a helper and create a nexthop version that is called if the fib_info uses an external nexthop. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26ipv4: Refactor nhc evaluation in fib_table_lookupDavid Ahern
FIB lookups can return an entry that references an external nexthop. While walking the nexthop struct we do not want to make multiple calls into the nexthop code which can result in 2 different structs getting accessed - one returning the number of paths the rest of the loop seeing a different nh_grp struct. If the nexthop group shrunk, the result is an attempt to access a fib_nh_common that does not exist for the new nh_grp struct but did for the old one. To fix that move the device evaluation code to a helper that can be used for inline fib_nh path as well as external nexthops. Update the existing check for fi->nh in fib_table_lookup to call a new helper, nexthop_get_nhc_lookup, which walks the external nexthop with a single rcu dereference. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26nexthop: Expand nexthop_is_multipath in a few placesDavid Ahern
I got too fancy consolidating checks on multipath type. The result is that path lookups can access 2 different nh_grp structs as exposed by Nik's torture tests. Expand nexthop_is_multipath within nexthop.h to avoid multiple, nh_grp dereferences and make decisions based on the consistent struct. Only 2 places left using nexthop_is_multipath are within IPv6, both only check that the nexthop is a multipath for a branching decision which are acceptable. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26nexthops: don't modify published nexthop groupsNikolay Aleksandrov
We must avoid modifying published nexthop groups while they might be in use, otherwise we might see NULL ptr dereferences. In order to do that we allocate 2 nexthoup group structures upon nexthop creation and swap between them when we have to delete an entry. The reason is that we can't fail nexthop group removal, so we can't handle allocation failure thus we move the extra allocation on creation where we can safely fail and return ENOMEM. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26nexthops: Move code from remove_nexthop_from_groups to remove_nh_grp_entryDavid Ahern
Move nh_grp dereference and check for removing nexthop group due to all members gone into remove_nh_grp_entry. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26statx: hide interfaces no longer used by io_uringBijan Mottahedeh
The io_uring interfaces have been replaced by do_statx() and are no longer needed. Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-26io_uring: call statx directlyBijan Mottahedeh
Calling statx directly both simplifies the interface and avoids potential incompatibilities between sync and async invokations. Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-26statx: allow system call to be invoked from io_uringBijan Mottahedeh
This is a prepatory patch to allow io_uring to invoke statx directly. Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-26io_uring: add io_statx structureBijan Mottahedeh
Separate statx data from open in io_kiocb. No functional changes. Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-26block/floppy: fix contended case in floppy_queue_rq()Jiri Kosina
Since the switch of floppy driver to blk-mq, the contended (fdc_busy) case in floppy_queue_rq() is not handled correctly. In case we reach floppy_queue_rq() with fdc_busy set (i.e. with the floppy locked due to another request still being in-flight), we put the request on the list of requests and return BLK_STS_OK to the block core, without actually scheduling delayed work / doing further processing of the request. This means that processing of this request is postponed until another request comes and passess uncontended. Which in some cases might actually never happen and we keep waiting indefinitely. The simple testcase is for i in `seq 1 2000`; do echo -en $i '\r'; blkid --info /dev/fd0 2> /dev/null; done run in quemu. That reliably causes blkid eventually indefinitely hanging in __floppy_read_block_0() waiting for completion, as the BIO callback never happens, and no further IO is ever submitted on the (non-existent) floppy device. This was observed reliably on qemu-emulated device. Fix that by not queuing the request in the contended case, and return BLK_STS_RESOURCE instead, so that blk core handles the request rescheduling and let it pass properly non-contended later. Fixes: a9f38e1dec107a ("floppy: convert to blk-mq") Cc: stable@vger.kernel.org Tested-by: Libor Pechacek <lpechacek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-26drm/amdgpu: fix device attribute node create failed with multi gpuKevin Wang
the origin design will use varible of "attr->states" to save node supported states on current gpu device, but for multi gpu device, when probe second gpu device, the driver will check attribute node states from previous gpu device wthether to create attribute node. it will cause other gpu device create attribute node faild. 1. add member attr_list into amdgpu_device to link supported device attribute node. 2. add new structure "struct amdgpu_device_attr_entry{}" to track device attribute state. 3. drop member "states" from amdgpu_device_attr. v2: 1. move "attr_list" into amdgpu_pm and rename to "pm_attr_list". 2. refine create & remove device node functions parameter. fix: drm/amdgpu: optimize amdgpu device attribute code Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-14 17:15:29 +0000