| Age | Commit message (Collapse) | Author |
|---|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-5-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify the probe() function by using local 'dev' instead of
&pdev->dev. While touching devm_kzalloc(), use preferred sizeof(*)
syntax.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-4-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-3-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify the probe() function by using local 'dev' instead of
&pdev->dev.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-2-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
During the probe, driver enables clocks necessary to access registers
(in get_temp()) and then registers thermal zone with managed-resources
(devm) interface. Removal of device is not done in reversed order,
because:
1. Clock will be disabled in driver remove() callback - thermal zone is
still registered and accessible to users,
2. devm interface will unregister thermal zone.
This leaves short window between (1) and (2) for accessing the
get_temp() callback with disabled clock.
Fix this by enabling clock also via devm-interface, so entire cleanup
path will be in proper, reversed order.
Fixes: 8454c8c09c77 ("thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-1-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
It is possible to have thermal zones which don't have any trip points.
These zones in effect simply represent a temperature sensor without any
action associated with it. While the schema has always required a
'trips' node, users have existed for a long time without it. Update the
schema to match reality.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709150154.3272825-1-robh@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-12-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Preferred indentation for DTS examples in the bindings is 4-space. It
is also preferred not to have redundant/unused labels. No functional
change
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-22-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify few bindings which already reference thermal-sensor.yaml schema
by dropping unneeded requiring of '#thermal-sensor-cells' and dropping
assigned-clocks properties (core schema allows it if 'clocks' are
there).
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-21-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-20-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-19-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-18-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-17-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-16-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-15-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-14-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-13-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-11-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-10-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-9-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-8-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-7-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-6-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-5-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-4-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-3-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and all in-tree DTS provide
'#thermal-sensor-cells', so reference the thermal-sensor.yaml to
simplify it, bring the common definition of '#thermal-sensor-cells'
property and require it.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Guillaume LA ROQUE <glaroque@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-2-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
All Samsung Exynos SoCs Thermal Management Units have only one sensor,
so make '#thermal-sensor-cells' fixed at 0.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-1-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
On some pre-production hardware, the SoCs do not contain calibration
data for the thermal sensors. The downstream drivers provide default
values that sort of work, instead of having the thermal sensors not
work at all.
Port the default values to the upstream driver. These values are from
the ChromeOS kernels, which sadly do not cover the MT7988.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240620092306.2352606-1-wenst@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Linux kernel uses thermal zone node name during registering thermal
zones and has a hard-coded limit of 20 characters, including terminating
NUL byte. The bindings expect node names to finish with '-thermal'
which is eight bytes long, thus we have only 11 characters for the reset
of the node name (thus 10 for the pattern after leading fixed character).
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_JsqKogbT_4DPd1n94xqeHaU_J8ve5K09WOyVsRX3jxxUW3w@mail.gmail.com/
Fixes: 1202a442a31f ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240702145248.47184-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Document the Temperature Sensor (TSENS) on the X1E80100 Platform.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Link: https://lore.kernel.org/r/20240628-x1e80100-bindings-thermal-qcom-tsens-v2-1-4843d4c2ba24@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Convert the hisilicon SoCs tsensor txt bindings to dt-schema
Signed-off-by: Abdulrasaq Lawani <abdulrasaqolawani@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240618-hisilicon-thermal-dt-bindings-conversion-v4-1-7eba97fbe6d0@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix thermal zone names for consistency with the other SoCs:
- GPU0 must be used as the first GPU item.
- SOCx deal with audio DSP, video, and infra subsystems.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definitions can be safely modified here because they are used only
in the LVTS driver, which is modified accordingly, and have not yet
been included in a released kernel.
Fixes: 78c88534e5e1 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-2-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix a thermal zone name for consistency with the other SoCs:
MFG contains GPU, the latter is more specific and must be used here.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definition can be safely modified here because it is used only
in the LVTS driver, which is modified accordingly, and has not yet
been included in a released kernel.
Fixes: a2ca202350f9 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-1-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
This add suspend-to-ram support.
The derived_table is kept-as is, so the resume is only about
pm_runtime_* calls and restoring the same registers as the probe.
Extract the hardware initialization procedure to a function called at
both probe-time & resume-time.
The probe-time loop is split in two to ensure doing the hardware
initialization before registering thermal zones. That ensures our
callbacks cannot be called while in bad state.
The 100ms delay in the hardware initialization sequence was removed.
It was initially added to be sure the thresholds are programmed before
enabling the interrupt, but in fact it's not needed (tested on J7200
platform).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The R-Car thermal driver depends on OF, describe this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240506154011.344324-3-niklas.soderlund+renesas@ragnatech.se
|
|
Move all Renesas thermal drivers to a vendor specific directory.
All drivers are moved verbatim apart from the updated include path for
thermal_hwmon.h.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240506154011.344324-2-niklas.soderlund+renesas@ragnatech.se
|
|
Convert the Spreadtrum SC9860 timer bindings to DT schema.
Changes during conversion:
- rename file to match compatible
- add sprd,sc9860-suspend-timer which was previously undocumented
- minor grammar fix in description
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/ZoU95lBgoyF/8Md3@standask-GA-A55M-S2HP
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
edac-updates
* ras/edac-amd-atl:
RAS/AMD/FMPM: Use atl internal.h for INVALID_SPA
RAS/AMD/ATL: Implement DF 4.5 NP2 denormalization
RAS/AMD/ATL: Validate address map when information is gathered
RAS/AMD/ATL: Expand helpers for adding and removing base and hole
RAS/AMD/ATL: Read DRAM hole base early
RAS/AMD/ATL: Add amd_atl pr_fmt() prefix
RAS/AMD/ATL: Add a missing module description
* ras/edac-misc:
EDAC: Add missing MODULE_DESCRIPTION() macros
EDAC/dmc520: Use devm_platform_ioremap_resource()
EDAC/igen6: Add Intel Arrow Lake-U/H SoCs support
EDAC, i10nm: make skx_common.o a separate module
EDAC/skx: Switch to new Intel CPU model defines
EDAC/sb_edac: Switch to new Intel CPU model defines
EDAC, pnd2: Switch to new Intel CPU model defines
EDAC/i10nm: Switch to new Intel CPU model defines
EDAC/ghes: Add missing newline to pr_info() statement
RAS/AMD/ATL: Add missing newline to pr_info() statement
EDAC/thunderx: Remove unused struct error_syndrome
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Use cleanup.h helpers to simplify some code paths.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/851d4180f1df5a10ca6e2feaf429611f1c0ccc88.1720515666.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
function
Fix ill-formed implementation of the platform_profile_omen_get function
introduced by the commit d23430233494 ("platform/x86: hp-wmi: Fix
platform profile option switch bug on Omen and Victus laptops").
platform_profile_omen_get() is .profile_get function that should set
*profile and return 0 on success.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: d23430233494 ("platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops")
Signed-off-by: Alexis Belmonte <alexbelm48@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/ZpFnV8w1558BW7iZ@alexis-pc
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The newly added driver causes a Kconfig warning:
WARNING: unmet direct dependencies detected for RTC_CLASS
Depends on [n]: !S390 [=y]
Selected by [m]:
- TURRIS_OMNIA_MCU [=m] && CZNIC_PLATFORMS [=y] && (MACH_ARMADA_38X || COMPILE_TEST [=y]) && I2C [=m] && OF [=y] && WATCHDOG [=y]
The problem here is that it selects entire subsystems, which normal
device drivers should not do. Changes all of these to 'depends on'
instead.
Fixes: dfa556e45ae9e ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
Fixes: 90e700fd12b61 ("platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup")
Fixes: ab89fb5fb92c7 ("platform: cznic: turris-omnia-mcu: Add support for MCU watchdog")
Fixes: 41bb142a40289 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
To ensure non-reentrancy, __queue_work() attempts to enqueue a work
item to the pool of the currently executing worker. This is not only
unnecessary for an ordered workqueue, where order inherently suggests
non-reentrancy, but it could also disrupt the sequence if the item is
not enqueued on the newest PWQ.
Just queue it to the newest PWQ and let order management guarantees
non-reentrancy.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Fixes: 4c065dbce1e8 ("workqueue: Enable unbound cpumask update on ordered workqueues")
Cc: stable@vger.kernel.org # v6.9+
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit 74347be3edfd11277799242766edf844c43dd5d3)
|
|
|
|
If the driver uses a page pool, it creates a page pool with
page_pool_create().
The reference count of page pool is 1 as default.
A page pool will be destroyed only when a reference count reaches 0.
page_pool_destroy() is used to destroy page pool, it decreases a
reference count.
When a page pool is destroyed, ->disconnect() is called, which is
mem_allocator_disconnect().
This function internally acquires mutex_lock().
If the driver uses XDP, it registers a memory model with
xdp_rxq_info_reg_mem_model().
The xdp_rxq_info_reg_mem_model() internally increases a page pool
reference count if a memory model is a page pool.
Now the reference count is 2.
To destroy a page pool, the driver should call both page_pool_destroy()
and xdp_unreg_mem_model().
The xdp_unreg_mem_model() internally calls page_pool_destroy().
Only page_pool_destroy() decreases a reference count.
If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we
will face an invalid wait context warning.
Because xdp_unreg_mem_model() calls page_pool_destroy() with
rcu_read_lock().
The page_pool_destroy() internally acquires mutex_lock().
Splat looks like:
=============================
[ BUG: Invalid wait context ]
6.10.0-rc6+ #4 Tainted: G W
-----------------------------
ethtool/1806 is trying to lock:
ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150
other info that might help us debug this:
context-{5:5}
3 locks held by ethtool/1806:
stack backtrace:
CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
__lock_acquire+0x1681/0x4de0
? _printk+0x64/0xe0
? __pfx_mark_lock.part.0+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
lock_acquire+0x1b3/0x580
? mem_allocator_disconnect+0x73/0x150
? __wake_up_klogd.part.0+0x16/0xc0
? __pfx_lock_acquire+0x10/0x10
? dump_stack_lvl+0x91/0xc0
__mutex_lock+0x15c/0x1690
? mem_allocator_disconnect+0x73/0x150
? __pfx_prb_read_valid+0x10/0x10
? mem_allocator_disconnect+0x73/0x150
? __pfx_llist_add_batch+0x10/0x10
? console_unlock+0x193/0x1b0
? lockdep_hardirqs_on+0xbe/0x140
? __pfx___mutex_lock+0x10/0x10
? tick_nohz_tick_stopped+0x16/0x90
? __irq_work_queue_local+0x1e5/0x330
? irq_work_queue+0x39/0x50
? __wake_up_klogd.part.0+0x79/0xc0
? mem_allocator_disconnect+0x73/0x150
mem_allocator_disconnect+0x73/0x150
? __pfx_mem_allocator_disconnect+0x10/0x10
? mark_held_locks+0xa5/0xf0
? rcu_is_watching+0x11/0xb0
page_pool_release+0x36e/0x6d0
page_pool_destroy+0xd7/0x440
xdp_unreg_mem_model+0x1a7/0x2a0
? __pfx_xdp_unreg_mem_model+0x10/0x10
? kfree+0x125/0x370
? bnxt_free_ring.isra.0+0x2eb/0x500
? bnxt_free_mem+0x5ac/0x2500
xdp_rxq_info_unreg+0x4a/0xd0
bnxt_free_mem+0x1356/0x2500
bnxt_close_nic+0xf0/0x3b0
? __pfx_bnxt_close_nic+0x10/0x10
? ethnl_parse_bit+0x2c6/0x6d0
? __pfx___nla_validate_parse+0x10/0x10
? __pfx_ethnl_parse_bit+0x10/0x10
bnxt_set_features+0x2a8/0x3e0
__netdev_update_features+0x4dc/0x1370
? ethnl_parse_bitset+0x4ff/0x750
? __pfx_ethnl_parse_bitset+0x10/0x10
? __pfx___netdev_update_features+0x10/0x10
? mark_held_locks+0xa5/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x70
? __pm_runtime_resume+0x7d/0x110
ethnl_set_features+0x32d/0xa20
To fix this problem, it uses rhashtable_lookup_fast() instead of
rhashtable_lookup() with rcu_read_lock().
Using xa without rcu_read_lock() here is safe.
xa is freed by __xdp_mem_allocator_rcu_free() and this is called by
call_rcu() of mem_xa_remove().
The mem_xa_remove() is called by page_pool_destroy() if a reference
count reaches 0.
The xa is already protected by the reference count mechanism well in the
control plane.
So removing rcu_read_lock() for page_pool_destroy() is safe.
Fixes: c3f812cea0d7 ("page_pool: do not release pool until inflight == 0.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240712095116.3801586-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the commit bdacf3e34945 ("net: Use nested-BH locking for
napi_alloc_cache.") was merged, the following warning began to appear:
WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0
__warn+0x12f/0x340
napi_skb_cache_put+0x82/0x4b0
napi_skb_cache_put+0x82/0x4b0
report_bug+0x165/0x370
handle_bug+0x3d/0x80
exc_invalid_op+0x1a/0x50
asm_exc_invalid_op+0x1a/0x20
__free_old_xmit+0x1c8/0x510
napi_skb_cache_put+0x82/0x4b0
__free_old_xmit+0x1c8/0x510
__free_old_xmit+0x1c8/0x510
__pfx___free_old_xmit+0x10/0x10
The issue arises because virtio is assuming it's running in NAPI context
even when it's not, such as in the netpoll case.
To resolve this, modify virtnet_poll_tx() to only set NAPI when budget
is available. Same for virtnet_poll_cleantx(), which always assumed that
it was in a NAPI context.
Fixes: df133f3f9625 ("virtio_net: bulk free tx skbs")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://patch.msgid.link/20240712115325.54175-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kamil Horák says:
====================
net: phy: bcm5481x: add support for BroadR-Reach mode
PATCH 1 - Add the 10baseT1BRR_Full link mode
PATCH 2 - Add the definitions of LRE registers, necessary to use
BroadR-Reach modes on the BCM5481x PHY
PATCH 3 - Add brr-mode flag to switch between IEEE802.3 and BroadR-Reach
PATCH 4 - Implementation of the BroadR-Reach modes for the Broadcom
PHYs
====================
Link: https://patch.msgid.link/20240712150709.3134474-1-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement single-pair BroadR-Reach modes on bcm5481x PHY by Broadcom.
Create set of functions alternative to IEEE 802.3 to handle
configuration of these modes on compatible Broadcom PHYs.
There is only subset of capabilities supported because of limited
collection of hardware available for the development.
For BroadR-Reach capable PHYs, the LRE (Long Reach Ethernet)
alternative register set is handled. Only bcm54811 PHY is verified,
for bcm54810, there is some support possible but untested. There
is no auto-negotiation of the link parameters (called LDS in the
Broadcom terminology, Long-Distance Signaling) for bcm54811.
It should be possible to enable LDS for bcm54810.
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240712150709.3134474-5-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a group of PHY chips supporting BroadR-Reach link modes in
a manner allowing for more or less identical register usage as standard
Clause 22 PHY.
These chips support standard Ethernet link modes as well, however, the
circuitry is mutually exclusive and cannot be auto-detected.
The link modes in question are 100Base-T1 as defined in IEEE802.3bw,
based on Broadcom's 1BR-100 link mode, and newly defined 10Base-T1BRR
(1BR-10 in Broadcom documents).
Add optional brr-mode flag to switch the PHY to BroadR-Reach mode.
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240712150709.3134474-4-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the definitions of LRE registers for Broadcom BCM5481x PHY
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240712150709.3134474-3-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
