| Age | Commit message (Collapse) | Author |
|---|
|
When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls
__bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them
the struct bpf_tramp_image *im pointer as an argument in R0.
The trampoline generation code uses emit_addr_mov_i64() to emit
instructions for moving the bpf_tramp_image address into R0, but
emit_addr_mov_i64() assumes the address to be in the vmalloc() space
and uses only 48 bits. Because bpf_tramp_image is allocated using
kzalloc(), its address can use more than 48-bits, in this case the
trampoline will pass an invalid address to __bpf_tramp_enter/exit()
causing a kernel crash.
Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64()
as it can work with addresses that are greater than 48-bits.
Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/all/SJ0PR15MB461564D3F7E7A763498CA6A8CBDB2@SJ0PR15MB4615.namprd15.prod.outlook.com/
Link: https://lore.kernel.org/bpf/20240711151838.43469-1-puranjay@kernel.org
|
|
Remove unnecessary size checks when copying bitmaps in ice_add_sw_recipe()
and replace them with compile time assert. Check if the bitmaps are equal
size, as they are copied both ways.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The content of the first read recipe is used as a template when adding a
recipe. It isn't needed - only prune index is directly set from there. Set
it in the code instead. Also, now there's no need to set rid and lookup
indexes to 0, as the whole recipe buffer is initialized to 0.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
No check is done on the size of the data to be transmiited. This causes
a kernel panic when this size exceeds the sg_miter's length.
Limit the number of transmitted bytes to sgm->length.
Cc: stable@vger.kernel.org
Fixes: ed01d210fd91 ("mmc: davinci_mmc: Use sg_miter for PIO")
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240711081838.47256-2-bastien.curutchet@bootlin.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
blk_queue_max_segment_size() ensured:
if (max_size < PAGE_SIZE)
max_size = PAGE_SIZE;
whereas:
blk_validate_limits() makes it an error:
if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
return -EINVAL;
The change from one to the other, exposed sdhci which was setting maximum
segment size too low in some circumstances.
Fix the maximum segment size when it is too low.
Fixes: 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240710180737.142504-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Remove field_off as it's never used.
Remove done bitmap, as its value is only checked and never assigned.
Reusing sub-recipes while creating new root recipes is currently not
supported in the driver.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The macro set_fixmap_offset_io() was added in commit f774b7d10e21
("arm64: fixmap: fix missing sub-page offset for earlyprintk") but then
commit 8ef0ed95ee04 ("arm64: remove arch specific earlyprintk") removed
the file causing the only user to be removed when the two commits were
merged. Since this has never been used again since the v3.15 release
remove it.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Switch over to using software nodes/properties to describe the
touchscreen instead of using the legacy platform data. This will
allow to drop support for the platform data from TSC2007 driver
and rely solely on the generic driver properties.
Note: "model" is not part of defined device properties and is not
used by the TSC2007 driver, so it can be safely dropped.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/ZoWg89A8C4gylTGX@google.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Free arbiter allocated in intel_hdcp_gsc_init().
Fixes: 152f2df954d8 ("drm/xe/hdcp: Enable HDCP for XE")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708125918.23573-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 33891539f9d6f245e93a76e3fb5791338180374f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The caching mode for buffer objects with VRAM as a possible
placement was forced to write-combined, regardless of placement.
However, write-combined system memory is expensive to allocate and
even though it is pooled, the pool is expensive to shrink, since
it involves global CPU TLB flushes.
Moreover write-combined system memory from TTM is only reliably
available on x86 and DGFX doesn't have an x86 restriction.
So regardless of the cpu caching mode selected for a bo,
internally use write-back caching mode for system memory on DGFX.
Coherency is maintained, but user-space clients may perceive a
difference in cpu access speeds.
v2:
- Update RB- and Ack tags.
- Rephrase wording in xe_drm.h (Matt Roper)
v3:
- Really rephrase wording.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 622f709ca629 ("drm/xe/uapi: Add support for CPU caching mode")
Cc: Pallavi Mishra <pallavi.mishra@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Effie Yu <effie.yu@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 622f709ca629 ("drm/xe/uapi: Add support for CPU caching mode")
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Acked-by: Effie Yu <effie.yu@intel.com> #On chat
Link: https://patchwork.freedesktop.org/patch/msgid/20240705132828.27714-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 01e0cfc994be484ddcb9e121e353e51d8bb837c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A few fairly small fixes for ASoC, there's a relatively large set of
hardening changes for the cs_dsp firmware file parsing and a couple of
other small device specific fixes.
|
|
We store the progress (root and inode numbers) of the extent map shrinker
in fs_info without any synchronization but we can have multiple tasks
calling into the shrinker during memory allocations when there's enough
memory pressure for example.
This can result in a task A reading fs_info->extent_map_shrinker_last_ino
after another task B updates it, and task A reading
fs_info->extent_map_shrinker_last_root before task B updates it, making
task A see an odd state that isn't necessarily harmful but may make it
skip certain inode ranges or do more work than necessary by going over
the same inodes again. These unprotected accesses would also trigger
warnings from tools like KCSAN.
So add a lock to protect access to these progress fields.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The extent map shrinker can be called in a variety of contexts where we
are under memory pressure, and of them is when a task is trying to
allocate memory. For this reason the shrinker is typically called with a
value of struct shrink_control::nr_to_scan that is much smaller than what
we return in the nr_cached_objects callback of struct super_operations
(fs/btrfs/super.c:btrfs_nr_cached_objects()), so that the shrinker does
not take a long time and cause high latencies. However we can still take
a lot of time in the shrinker even for a limited amount of nr_to_scan:
1) When traversing the red black tree that tracks open inodes in a root,
as for example with millions of open inodes we get a deep tree which
takes time searching for an inode;
2) Iterating over the extent map tree, which is a red black tree, of an
inode when doing the rb_next() calls and when removing an extent map
from the tree, since often that requires rebalancing the red black
tree;
3) When trying to write lock an inode's extent map tree we may wait for a
significant amount of time, because there's either another task about
to do IO and searching for an extent map in the tree or inserting an
extent map in the tree, and we can have thousands or even millions of
extent maps for an inode. Furthermore, there can be concurrent calls
to the shrinker so the lock might be busy simply because there is
already another task shrinking extent maps for the same inode;
4) We often reschedule if we need to, which further increases latency.
So improve on this by stopping the extent map shrinking code whenever we
need to reschedule and make it skip an inode if we can't immediately lock
its extent map tree.
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reported-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CABXGCsMmmb36ym8hVNGTiU8yfUS_cGvoUmGCcBrGWq9OxTrs+A@mail.gmail.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When putting an inode during extent map shrinking we're doing a standard
iput() but that may take a long time in case the inode is dirty and we are
doing the final iput that triggers eviction - the VFS will have to wait
for writeback before calling the btrfs evict callback (see
fs/inode.c:evict()).
This slows down the task running the shrinker which may have been
triggered while updating some tree for example, meaning locks are held
as well as an open transaction handle.
Also if the iput() ends up triggering eviction and the inode has no links
anymore, then we trigger item truncation which requires flushing delayed
items, space reservation to start a transaction and that may trigger the
space reclaim task and wait for it, resulting in deadlocks in case the
reclaim task needs for example to commit a transaction and the shrinker
is being triggered from a path holding a transaction handle.
Syzbot reported such a case with the following stack traces:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc2-syzkaller-00010-g2ab795141095 #0 Not tainted
------------------------------------------------------
kswapd0/111 is trying to acquire lock:
ffff88801eae4610 (sb_internal#3){.+.+}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275
but task is already holding lock:
ffffffff8dd3a9a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xa88/0x1970 mm/vmscan.c:6924
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (fs_reclaim){+.+.}-{0:0}:
__fs_reclaim_acquire mm/page_alloc.c:3783 [inline]
fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3797
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3890 [inline]
slab_alloc_node mm/slub.c:3980 [inline]
kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4019
btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411
alloc_inode+0x5d/0x230 fs/inode.c:261
iget5_locked fs/inode.c:1235 [inline]
iget5_locked+0x1c9/0x2c0 fs/inode.c:1228
btrfs_iget_locked fs/btrfs/inode.c:5590 [inline]
btrfs_iget_path fs/btrfs/inode.c:5607 [inline]
btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636
create_reloc_inode+0x403/0x820 fs/btrfs/relocation.c:3911
btrfs_relocate_block_group+0x471/0xe60 fs/btrfs/relocation.c:4114
btrfs_relocate_chunk+0x143/0x450 fs/btrfs/volumes.c:3373
__btrfs_balance fs/btrfs/volumes.c:4157 [inline]
btrfs_balance+0x211a/0x3f00 fs/btrfs/volumes.c:4534
btrfs_ioctl_balance fs/btrfs/ioctl.c:3675 [inline]
btrfs_ioctl+0x12ed/0x8290 fs/btrfs/ioctl.c:4742
__do_compat_sys_ioctl+0x2c3/0x330 fs/ioctl.c:1007
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #2 (btrfs_trans_num_extwriters){++++}-{0:0}:
join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315
start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700
btrfs_rebuild_free_space_tree+0xaa/0x480 fs/btrfs/free-space-tree.c:1323
btrfs_start_pre_rw_mount+0x218/0xf60 fs/btrfs/disk-io.c:2999
open_ctree+0x41ab/0x52e0 fs/btrfs/disk-io.c:3554
btrfs_fill_super fs/btrfs/super.c:946 [inline]
btrfs_get_tree_super fs/btrfs/super.c:1863 [inline]
btrfs_get_tree+0x11e9/0x1b90 fs/btrfs/super.c:2089
vfs_get_tree+0x8f/0x380 fs/super.c:1780
fc_mount+0x16/0xc0 fs/namespace.c:1125
btrfs_get_tree_subvol fs/btrfs/super.c:2052 [inline]
btrfs_get_tree+0xa53/0x1b90 fs/btrfs/super.c:2090
vfs_get_tree+0x8f/0x380 fs/super.c:1780
do_new_mount fs/namespace.c:3352 [inline]
path_mount+0x6e1/0x1f10 fs/namespace.c:3679
do_mount fs/namespace.c:3692 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount fs/namespace.c:3875 [inline]
__ia32_sys_mount+0x295/0x320 fs/namespace.c:3875
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #1 (btrfs_trans_num_writers){++++}-{0:0}:
join_transaction+0x148/0xf40 fs/btrfs/transaction.c:314
start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700
btrfs_rebuild_free_space_tree+0xaa/0x480 fs/btrfs/free-space-tree.c:1323
btrfs_start_pre_rw_mount+0x218/0xf60 fs/btrfs/disk-io.c:2999
open_ctree+0x41ab/0x52e0 fs/btrfs/disk-io.c:3554
btrfs_fill_super fs/btrfs/super.c:946 [inline]
btrfs_get_tree_super fs/btrfs/super.c:1863 [inline]
btrfs_get_tree+0x11e9/0x1b90 fs/btrfs/super.c:2089
vfs_get_tree+0x8f/0x380 fs/super.c:1780
fc_mount+0x16/0xc0 fs/namespace.c:1125
btrfs_get_tree_subvol fs/btrfs/super.c:2052 [inline]
btrfs_get_tree+0xa53/0x1b90 fs/btrfs/super.c:2090
vfs_get_tree+0x8f/0x380 fs/super.c:1780
do_new_mount fs/namespace.c:3352 [inline]
path_mount+0x6e1/0x1f10 fs/namespace.c:3679
do_mount fs/namespace.c:3692 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount fs/namespace.c:3875 [inline]
__ia32_sys_mount+0x295/0x320 fs/namespace.c:3875
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #0 (sb_internal#3){.+.+}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain kernel/locking/lockdep.c:3869 [inline]
__lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write include/linux/fs.h:1655 [inline]
sb_start_intwrite include/linux/fs.h:1838 [inline]
start_transaction+0xbc1/0x1a70 fs/btrfs/transaction.c:694
btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275
btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291
evict+0x2ed/0x6c0 fs/inode.c:667
iput_final fs/inode.c:1741 [inline]
iput.part.0+0x5a8/0x7f0 fs/inode.c:1767
iput+0x5c/0x80 fs/inode.c:1757
btrfs_scan_root fs/btrfs/extent_map.c:1118 [inline]
btrfs_free_extent_maps+0xbd3/0x1320 fs/btrfs/extent_map.c:1189
super_cache_scan+0x409/0x550 fs/super.c:227
do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435
shrink_slab+0x18a/0x1310 mm/shrinker.c:662
shrink_one+0x493/0x7c0 mm/vmscan.c:4790
shrink_many mm/vmscan.c:4851 [inline]
lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951
shrink_node mm/vmscan.c:5910 [inline]
kswapd_shrink_node mm/vmscan.c:6720 [inline]
balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911
kswapd+0x5ea/0xbf0 mm/vmscan.c:7180
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
other info that might help us debug this:
Chain exists of:
sb_internal#3 --> btrfs_trans_num_extwriters --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(btrfs_trans_num_extwriters);
lock(fs_reclaim);
rlock(sb_internal#3);
*** DEADLOCK ***
2 locks held by kswapd0/111:
#0: ffffffff8dd3a9a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xa88/0x1970 mm/vmscan.c:6924
#1: ffff88801eae40e0 (&type->s_umount_key#62){++++}-{3:3}, at: super_trylock_shared fs/super.c:562 [inline]
#1: ffff88801eae40e0 (&type->s_umount_key#62){++++}-{3:3}, at: super_cache_scan+0x96/0x550 fs/super.c:196
stack backtrace:
CPU: 0 PID: 111 Comm: kswapd0 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain kernel/locking/lockdep.c:3869 [inline]
__lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write include/linux/fs.h:1655 [inline]
sb_start_intwrite include/linux/fs.h:1838 [inline]
start_transaction+0xbc1/0x1a70 fs/btrfs/transaction.c:694
btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275
btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291
evict+0x2ed/0x6c0 fs/inode.c:667
iput_final fs/inode.c:1741 [inline]
iput.part.0+0x5a8/0x7f0 fs/inode.c:1767
iput+0x5c/0x80 fs/inode.c:1757
btrfs_scan_root fs/btrfs/extent_map.c:1118 [inline]
btrfs_free_extent_maps+0xbd3/0x1320 fs/btrfs/extent_map.c:1189
super_cache_scan+0x409/0x550 fs/super.c:227
do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435
shrink_slab+0x18a/0x1310 mm/shrinker.c:662
shrink_one+0x493/0x7c0 mm/vmscan.c:4790
shrink_many mm/vmscan.c:4851 [inline]
lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951
shrink_node mm/vmscan.c:5910 [inline]
kswapd_shrink_node mm/vmscan.c:6720 [inline]
balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911
kswapd+0x5ea/0xbf0 mm/vmscan.c:7180
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
So fix this by using btrfs_add_delayed_iput() so that the final iput is
delegated to the cleaner kthread.
Link: https://lore.kernel.org/linux-btrfs/000000000000892280061a344581@google.com/
Reported-by: syzbot+3dad89b3993a4b275e72@syzkaller.appspotmail.com
Fixes: 956a17d9d050 ("btrfs: add a shrinker for extent maps")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The xen_nopvspin boot parameter is deprecated since 2019. nopvspin
can be used instead.
Remove the xen_nopvspin boot parameter and replace the xen_pvspin
variable use cases with nopvspin.
This requires to move the nopvspin variable out of the .initdata
section, as it needs to be accessed for cpuhotplug, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Message-ID: <20240710110139.22300-1-jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
IoT interface
Document the Sierra Wireless mangOH Green SPI IoT interface as a trivial
device.
This fixes the following check:
qcom-mdm9615-wp8548-mangoh-green.dtb: /soc/gsbi@16200000/spi@16280000/spi@0: failed to match any schema with compatible: ['swir,mangoh-iotport-spi']
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710-topic-mdm9615-mangoh-iotport-spi-bindings-v1-1-3efe20cfea8a@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Under arch/x86/xen there is one large private header file xen-ops.h
containing most of the Xen-private x86 related declarations, and then
there are several small headers with a handful of declarations each.
Merge the small headers into xen-ops.h.
While doing that, move the declaration of xen_fifo_events from
xen-ops.h into include/xen/events.h where it should have been from the
beginning.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Message-ID: <20240710093718.14552-3-jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Some functions and variables in arch/x86/xen are used locally only,
make them static.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Message-ID: <20240710093718.14552-2-jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Today Xen multicall debugging needs to be enabled via modifying a
define in a source file for getting debug data of multicall errors
encountered by users.
Switch multicall debugging to depend on a boot parameter "xen_mc_debug"
instead, enabling affected users to boot with the new parameter set in
order to get better diagnostics.
With debugging enabled print the following information in case at least
one of the batched calls failed:
- all calls of the batch with operation, result and caller
- all parameters of each call
- all parameters stored in the multicall data for each call
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Message-ID: <20240710092749.13595-1-jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Currently, when built with "make W=1", the following warnings are
generated:
net/ceph/crush/mapper.c:466: warning: Function parameter or struct member 'work' not described in 'crush_choose_firstn'
net/ceph/crush/mapper.c:466: warning: Function parameter or struct member 'weight' not described in 'crush_choose_firstn'
net/ceph/crush/mapper.c:466: warning: Function parameter or struct member 'weight_max' not described in 'crush_choose_firstn'
net/ceph/crush/mapper.c:466: warning: Function parameter or struct member 'choose_args' not described in 'crush_choose_firstn'
Update the crush_choose_firstn() kernel-doc to document these
parameters.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
At add_ra_bio_pages() we are accessing the extent map to calculate
'add_size' after we dropped our reference on the extent map, resulting
in a use-after-free. Fix this by computing 'add_size' before dropping our
extent map reference.
Reported-by: syzbot+853d80cba98ce1157ae6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000038144061c6d18f2@google.com/
Fixes: 6a4049102055 ("btrfs: subpage: make add_ra_bio_pages() compatible")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, when built with "make W=1", the following warnings are
generated:
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'map' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'work' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'bucket' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'weight' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'weight_max' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'x' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'left' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'numrep' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'type' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'out' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'outpos' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'tries' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'recurse_tries' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'recurse_to_leaf' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'out2' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'parent_r' not described in 'crush_choose_indep'
net/ceph/crush/mapper.c:655: warning: Function parameter or struct member 'choose_args' not described in 'crush_choose_indep'
These warnings are generated because the prologue comment for
crush_choose_indep() uses the kernel-doc prefix, but the actual
comment is a very brief description that is not in kernel-doc
format. Since this is a static function there is no need to fully
document the function, so replace the kernel-doc comment prefix with a
standard comment prefix to remove these warnings.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Replace the deprecated[1] use of a 1-element array in
struct slink_front with a modern flexible array.
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Replace the deprecated[1] use of a 1-element array in
struct affs_data_head with a modern flexible array.
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
AFFS uses struct affs_head's "table" array as a flexible array. Switch
this to a proper flexible array[1]. There are no sizeof() uses; struct
affs_head is only ever uses via direct casts. No binary output
differences were found after this change.
Link: https://github.com/KSPP/linux/issues/79 [1]
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
fence->ctx may be stale memory when trace_xe_hw_fence_free is called
resuling UAF bug when deriving the device name. This tracepoint is not
all that useful, so just drop it.
Fixes: 501c4255c409 ("drm/xe/trace: Print device_id in xe_trace events")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708211008.956384-1-matthew.brost@intel.com
(cherry picked from commit caaf1f44a6a27bae33eee189842c4d8fc21c3b02)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.
Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.
v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)
Fixes: 52c2e956dceb ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf835 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703164801.2561423-1-ashutosh.dixit@intel.com
(cherry picked from commit 8169b2097d88d99d7e4a72e20e4b549efe9eb8d7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If we failed to link a free space entry because there's already a
conflicting entry for the same offset, we free the free space entry but
we don't free the associated bitmap that we had just allocated before.
Fix that by freeing the bitmap before freeing the entry.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Previously we had a BUG_ON() inside extent_range_clear_dirty_for_io(), as
we expected all involved folios to be still locked, thus no folio should be
missing.
However for extent_range_clear_dirty_for_io() itself, we can skip the
missing folio and handle the remaining ones, and return an error if
there is anything wrong.
Remove the BUG_ON() and let the caller to handle the error.
In the caller we do not have a quick way to cleanup the error, but all
the compression routines would handle the missing folio as an error and
properly error out, so we only need to do an ASSERT() for developers,
while for non-debug build the compression routine would handle the
error correctly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function is only used inside inode.c by compress_file_range(),
so move it to inode.c and unexport it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add more verbose and specific messages to all main error points in
compression code for all algorithms. Currently there's no way to know
which inode is affected or where in the data errors happened.
The messages follow a common format:
- what happened
- error code if relevant
- root and inode
- additional data like offsets or lengths
There's no helper for the messages as they differ in some details and
that would be cumbersome to generalize to a single function. As all the
errors are "almost never happens" there are the unlikely annotations
done as compression is hot path.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
KCSAN complains about a data race when accessing the last_trans field of a
root:
[ 199.553628] BUG: KCSAN: data-race in btrfs_record_root_in_trans [btrfs] / record_root_in_trans [btrfs]
[ 199.555186] read to 0x000000008801e308 of 8 bytes by task 2812 on cpu 1:
[ 199.555210] btrfs_record_root_in_trans+0x9a/0x128 [btrfs]
[ 199.555999] start_transaction+0x154/0xcd8 [btrfs]
[ 199.556780] btrfs_join_transaction+0x44/0x60 [btrfs]
[ 199.557559] btrfs_dirty_inode+0x9c/0x140 [btrfs]
[ 199.558339] btrfs_update_time+0x8c/0xb0 [btrfs]
[ 199.559123] touch_atime+0x16c/0x1e0
[ 199.559151] pipe_read+0x6a8/0x7d0
[ 199.559179] vfs_read+0x466/0x498
[ 199.559204] ksys_read+0x108/0x150
[ 199.559230] __s390x_sys_read+0x68/0x88
[ 199.559257] do_syscall+0x1c6/0x210
[ 199.559286] __do_syscall+0xc8/0xf0
[ 199.559318] system_call+0x70/0x98
[ 199.559431] write to 0x000000008801e308 of 8 bytes by task 2808 on cpu 0:
[ 199.559464] record_root_in_trans+0x196/0x228 [btrfs]
[ 199.560236] btrfs_record_root_in_trans+0xfe/0x128 [btrfs]
[ 199.561097] start_transaction+0x154/0xcd8 [btrfs]
[ 199.561927] btrfs_join_transaction+0x44/0x60 [btrfs]
[ 199.562700] btrfs_dirty_inode+0x9c/0x140 [btrfs]
[ 199.563493] btrfs_update_time+0x8c/0xb0 [btrfs]
[ 199.564277] file_update_time+0xb8/0xf0
[ 199.564301] pipe_write+0x8ac/0xab8
[ 199.564326] vfs_write+0x33c/0x588
[ 199.564349] ksys_write+0x108/0x150
[ 199.564372] __s390x_sys_write+0x68/0x88
[ 199.564397] do_syscall+0x1c6/0x210
[ 199.564424] __do_syscall+0xc8/0xf0
[ 199.564452] system_call+0x70/0x98
This is because we update and read last_trans concurrently without any
type of synchronization. This should be generally harmless and in the
worst case it can make us do extra locking (btrfs_record_root_in_trans())
trigger some warnings at ctree.c or do extra work during relocation - this
would probably only happen in case of load or store tearing.
So fix this by always reading and updating the field using READ_ONCE()
and WRITE_ONCE(), this silences KCSAN and prevents load and store tearing.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was missed in the basic driver and is useful for debug, so add it.
Example regmap output before the patch:
|root@zed-tg:~# cat /sys/kernel/debug/regmap/44a60000.pwm/registers
|0: 00020100
And with it:
|root@zed-tg:~# cat /sys/kernel/debug/regmap/44a60000.pwm/registers
|00: 00020100
|04: 00000000
|08: 00000000
|0c: 601a3471
|10: 00000000
|14: 00000002
|18: 00000001
|1c: 00000000
|...
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20240711125743.3956935-1-tgamblin@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
There is only one caller utilizing the @extra_gfp parameter,
alloc_eb_folio_array(). And in that case the extra_gfp is only assigned
to __GFP_NOFAIL.
Rename the @extra_gfp parameter to @nofail to indicate that.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_alloc_folio_array() is only utilized in
btrfs_submit_compressed_read() and no other location, and the only
caller is not utilizing the @extra_gfp parameter.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This new mount option allows the kernel to skip the super flags check,
it's mostly to allow the kernel to do a rescue mount of an interrupted
checksum conversion.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduce "rescue=ignoremetacsums" to ignore metadata csums, all the
other metadata sanity checks are still kept as is.
This new mount option is mostly to allow the kernel to mount an
interrupted checksum conversion (at the metadata csum overwrite stage).
And since the main part of metadata sanity checks is inside
tree-checker, we shouldn't lose much safety, and the new mount option is
rescue mount option it requires full read-only mount.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Most of the extra super block flags are beyond 32bits (from
CHANGING_FSID_V2 to CHANGING_*_CSUMS), thus using %llu is not only too
long and pretty hard to read.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The following three Opt_* enums haven't been utilized since the port to
new mount API:
- Opt_ignorebadroots
- Opt_ignoredatacsums
- Opt_rescue_all
All those enums are from the old day where we have dedicated mount
options, nowadays they have been moved to "rescue=" mount option
groups, and no more global tokens for them.
So we can safely remove them now.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is to ensure non-compressed file extents (both regular and
prealloc) should have matching ram_bytes and disk_num_bytes.
This is only for CONFIG_BTRFS_DEBUG and CONFIG_BTRFS_ASSERT case,
furthermore this will not return error, but just a kernel warning to
inform developers.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[HICCUP]
After adding extra checks on btrfs_file_extent_item::ram_bytes to
tree-checker, running fsstress leads to tree-checker warning at write time,
as we created file extent items with an invalid ram_bytes.
All those offending file extents have offset 0, and ram_bytes matching
num_bytes, and smaller than disk_num_bytes.
This would also trigger the recently enhanced btrfs-check, which catches
such mismatches and report them as minor errors.
[CAUSE]
When a folio/page is invalidated and it is part of a submitted OE, we
mark the OE truncated just to the beginning of the folio/page.
And for truncated OE, we insert the file extent item with incorrect
value for ram_bytes (using num_bytes instead of the usual value).
This is not a big deal for end users, as we do not utilize the ram_bytes
field for regular non-compressed extents.
This mismatch is just a small violation against on-disk format.
[FIX]
Fix it by removing the override on btrfs_file_extent_item::ram_bytes.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Previously validate_extent_map() is only to catch bugs related to
extent_map member cleanups.
But with recent btrfs-check enhancement to catch ram_bytes mismatch with
disk_num_bytes, it would be much better to catch such extent maps
earlier.
So this patch adds extra ram_bytes validation for extent maps.
Please note that, older filesystems with such mismatch won't trigger this error:
- extent_map::ram_bytes is already fixed
Previous patch has already fixed the ram_bytes for affected file
extents.
So this enhanced sanity check should not affect end users.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[HICCUP]
Kernels can create file extent items with incorrect ram_bytes like this:
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 13631488 nr 32768
extent data offset 0 nr 4096 ram 4096
extent compression 0 (none)
Thankfully kernel can handle them properly, as in that case ram_bytes is
not utilized at all.
[ENHANCEMENT]
Since the hiccup is not going to cause any data-loss and is only a minor
violation of on-disk format, here we only need to ignore the incorrect
ram_bytes value, and use the correct one from
btrfs_file_extent_item::disk_num_bytes.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[HICCUP]
Before commit 85de2be7129c ("btrfs: remove extent_map::block_start
member"), we utilized @bytenr variable inside
btrfs_extent_item_to_extent_map() to calculate block_start.
But that commit removed block_start completely, we have no need to
advance @bytenr at all.
[ENHANCEMENT]
- Rename @bytenr as @disk_bytenr
- Only declare @disk_bytenr inside the if branch
- Make @disk_bytenr const and remove the modification on it
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's a typo in an error message when checking the block group tree
feature, it mentions fres-space-tree instead of free-space-tree. Fix
that.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The direct IO code is over a thousand lines and it's currently spread
between file.c and inode.c, which makes it not easy to locate some parts
of it sometimes. Also inode.c is about 11 thousand lines and file.c about
4 thousand lines, both too big. So move all the direct IO code into a
dedicated file, so that it's easy to locate all its code and reduce the
sizes of inode.c and file.c.
This is a pure move of code without any other changes except export a
a couple functions from inode.c (get_extent_allocation_hint() and
create_io_em()) because they are used in inode.c and the new direct-io.c
file, and a couple functions from file.c (btrfs_buffered_write() and
btrfs_write_check()) because they are used both in file.c and in the new
direct-io.c file.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pass a struct btrfs_inode to btrfs_set_prop() as it's an
internal interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pass a struct btrfs_inode to btrfs_compress_heuristic() as it's an
internal interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The structure is internal so we should use struct btrfs_inode for that,
allowing to remove some use of BTRFS_I.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The structure is internal so we should use struct btrfs_inode for that.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
