summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-10gro: Enter slow-path if there is no tailroomHerbert Xu
The GRO path has a fast-path where we avoid calling pskb_may_pull and pskb_expand by directly accessing frag0. However, this should only be done if we have enough tailroom in the skb as otherwise we'll have to expand it later anyway. This patch adds the check by capping frag0_len with the skb tailroom. Fixes: cb18978cbf45 ("gro: Open-code final pskb_may_pull") Reported-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10mlx4: Return EOPNOTSUPP instead of ENOTSUPPMartin KaFai Lau
In commit b45f0674b997 ("mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs"), it changed EOPNOTSUPP to ENOTSUPP by mistake. This patch fixes it. Fixes: b45f0674b997 ("mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10net/af_iucv: don't use paged skbs for TX on HiperSocketsJulian Wiedmann
With commit e53743994e21 ("af_iucv: use paged SKBs for big outbound messages"), we transmit paged skbs for both of AF_IUCV's transport modes (IUCV or HiperSockets). The qeth driver for Layer 3 HiperSockets currently doesn't support NETIF_F_SG, so these skbs would just be linearized again by the stack. Avoid that overhead by using paged skbs only for IUCV transport. cc stable, since this also circumvents a significant skb leak when sending large messages (where the skb then needs to be linearized). Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> # v4.8+ Fixes: e53743994e21 ("af_iucv: use paged SKBs for big outbound messages") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10net: add the AF_QIPCRTR entries to family name tablesAnna, Suman
Commit bdabad3e363d ("net: Add Qualcomm IPC router") introduced a new address family. Update the family name tables accordingly so that the lockdep initialization can use the proper names for this family. Cc: Courtney Cavin <courtney.cavin@sonymobile.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10net: qrtr: Mark 'buf' as little endianStephen Boyd
Failure to mark this pointer as __le32 causes checkers like sparse to complain: net/qrtr/qrtr.c:274:16: warning: incorrect type in assignment (different base types) net/qrtr/qrtr.c:274:16: expected unsigned int [unsigned] [usertype] <noident> net/qrtr/qrtr.c:274:16: got restricted __le32 [usertype] <noident> net/qrtr/qrtr.c:275:16: warning: incorrect type in assignment (different base types) net/qrtr/qrtr.c:275:16: expected unsigned int [unsigned] [usertype] <noident> net/qrtr/qrtr.c:275:16: got restricted __le32 [usertype] <noident> net/qrtr/qrtr.c:276:16: warning: incorrect type in assignment (different base types) net/qrtr/qrtr.c:276:16: expected unsigned int [unsigned] [usertype] <noident> net/qrtr/qrtr.c:276:16: got restricted __le32 [usertype] <noident> Silence it. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10net: dsa: Ensure validity of dst->ds[0]Florian Fainelli
It is perfectly possible to have non zero indexed switches being present in a DSA switch tree, in such a case, we will be deferencing a NULL pointer while dsa_cpu_port_ethtool_{setup,restore}. Be more defensive and ensure that dst->ds[0] is valid before doing anything with it. Fixes: 0c73c523cf73 ("net: dsa: Initialize CPU port ethtool ops per tree") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10Merge tag 'linux-kselftest-4.10-rc4-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This update consists of fixes to use shell instead of bash to run tests in embedded devices where the only shell available is the busybox ash. Also included is a typo fix to a test result message" * tag 'linux-kselftest-4.10-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: x86/pkeys: fix spelling mistake: "itertation" -> "iteration" selftests: do not require bash to run netsocktests testcase selftests: do not require bash to run bpf tests selftests: do not require bash for the generated test
2017-01-10net: skb_flow_get_be16() can be staticEric Dumazet
Removes following sparse complain : net/core/flow_dissector.c:70:8: warning: symbol 'skb_flow_get_be16' was not declared. Should it be static? Fixes: 972d3876faa8 ("flow dissector: ICMP support") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10ibmvscsis: Fix srp_transfer_data fail return codeBryant G. Ly
If srp_transfer_data fails within ibmvscsis_write_pending, then the most likely scenario is that the client timed out the op and removed the TCE mapping. Thus it will loop forever retrying the op that is pretty much guaranteed to fail forever. A better return code would be EIO instead of EAGAIN. Cc: stable@vger.kernel.org Reported-by: Steven Royer <seroyer@linux.vnet.ibm.com> Tested-by: Steven Royer <seroyer@linux.vnet.ibm.com> Signed-off-by: Bryant G. Ly <bgly@us.ibm.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10Merge branch 'r8152-fix-autosuspend'David S. Miller
Hayes Wang says: ==================== r8152: fix autosuspend issue Avoid rx is split into two parts when runtime suspend occurs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10r8152: fix rx issue for runtime suspendhayeswang
Pause the rx and make sure the rx fifo is empty when the autosuspend occurs. If the rx data comes when the driver is canceling the rx urb, the host controller would stop getting the data from the device and continue it after next rx urb is submitted. That is, one continuing data is split into two different urb buffers. That let the driver take the data as a rx descriptor, and unexpected behavior happens. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10r8152: split rtl8152_suspend functionhayeswang
Split rtl8152_suspend() into rtl8152_system_suspend() and rtl8152_rumtime_suspend(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10target: support XCOPY requests without parametersDavid Disseldorp
SPC4r37 6.4.1 EXTENDED COPY(LID4) states (also applying to LID1 reqs): A parameter list length of zero specifies that the copy manager shall not transfer any data or alter any internal state, and this shall not be considered an error. This behaviour can be tested using the libiscsi ExtendedCopy.ParamHdr test. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10target: check for XCOPY parameter truncationDavid Disseldorp
Check for XCOPY header, CSCD descriptor and segment descriptor list truncation, and respond accordingly. SPC4r37 6.4.1 EXTENDED COPY(LID4) states (also applying to LID1 reqs): If the parameter list length causes truncation of the parameter list, then the copy manager shall transfer no data and shall terminate the EXTENDED COPY command with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to PARAMETER LIST LENGTH ERROR. This behaviour can be tested using the libiscsi ExtendedCopy.ParamHdr test. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10target: use XCOPY segment descriptor CSCD IDsDavid Disseldorp
The XCOPY specification in SPC4r37 states that the XCOPY source and destination device(s) should be derived from the copy source and copy destination (CSCD) descriptor IDs in the XCOPY segment descriptor. The CSCD IDs are generally (for block -> block copies), indexes into the corresponding CSCD descriptor list, e.g. ================================= EXTENDED COPY Header ================================= CSCD Descriptor List - entry 0 + LU ID <--------------<------------------\ - entry 1 | + LU ID <______________<_____________ | ================================= | | Segment Descriptor List | | - segment 0 | | + src CSCD ID = 0 --------->---------+----/ + dest CSCD ID = 1 ___________>______| + len + src lba + dest lba ================================= Currently LIO completely ignores the src and dest CSCD IDs in the Segment Descriptor List, and instead assumes that the first entry in the CSCD list corresponds to the source, and the second to the destination. This commit removes this assumption, by ensuring that the Segment Descriptor List is parsed prior to processing the CSCD Descriptor List. CSCD Descriptor List processing is modified to compare the current list index with the previously obtained src and dest CSCD IDs. Additionally, XCOPY requests where the src and dest CSCD IDs refer to the CSCD Descriptor List entry can now be successfully processed. Fixes: cbf031f ("target: Add support for EXTENDED_COPY copy offload") Link: https://bugzilla.kernel.org/show_bug.cgi?id=191381 Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10target: check XCOPY segment descriptor CSCD IDsDavid Disseldorp
Ensure that the segment descriptor CSCD descriptor ID values correspond to CSCD descriptor entries located in the XCOPY command parameter list. SPC4r37 6.4.6.1 Table 150 specifies this range as 0000h to 07FFh, where the CSCD descriptor location in the parameter list can be located via: 16 + (id * 32) Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> [ bvanassche: inserted "; " in the format string of an error message and also moved a "||" operator from the start of a line to the end of the previous line ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10target: simplify XCOPY wwn->se_dev lookup helperDavid Disseldorp
target_xcopy_locate_se_dev_e4() is used to locate an se_dev, based on the WWN provided with the XCOPY request. Remove a couple of unneeded arguments, and rely on the caller for the src/dst test. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10target: return UNSUPPORTED TARGET/SEGMENT DESC TYPE CODE senseDavid Disseldorp
Use UNSUPPORTED TARGET DESCRIPTOR TYPE CODE and UNSUPPORTED SEGMENT DESCRIPTOR TYPE CODE additional sense codes if a descriptor type in an XCOPY request is not supported, as specified in spc4r37 6.4.5 and 6.4.6. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10target: bounds check XCOPY total descriptor list lengthDavid Disseldorp
spc4r37 6.4.3.5 states: If the combined length of the CSCD descriptors and segment descriptors exceeds the allowed value, then the copy manager shall terminate the command with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to PARAMETER LIST LENGTH ERROR. This functionality can be tested using the libiscsi ExtendedCopy.DescrLimits test. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10target: bounds check XCOPY segment descriptor listDavid Disseldorp
Check the length of the XCOPY request segment descriptor list against the value advertised via the MAXIMUM SEGMENT DESCRIPTOR COUNT field in the RECEIVE COPY OPERATING PARAMETERS response. spc4r37 6.4.3.5 states: If the number of segment descriptors exceeds the allowed number, the copy manager shall terminate the command with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to TOO MANY SEGMENT DESCRIPTORS. This functionality is testable using the libiscsi ExtendedCopy.DescrLimits test. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10target: use XCOPY TOO MANY TARGET DESCRIPTORS senseDavid Disseldorp
spc4r37 6.4.3.4 states: If the number of CSCD descriptors exceeds the allowed number, the copy manager shall terminate the command with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to TOO MANY TARGET DESCRIPTORS. LIO currently responds with INVALID FIELD IN PARAMETER LIST, which sees it fail the libiscsi ExtendedCopy.DescrLimits test. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10target: add XCOPY target/segment desc sense codesDavid Disseldorp
As defined in http://www.t10.org/lists/asc-num.htm. To be used during validation of XCOPY target and segment descriptor lists. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10net: socket: Make unnecessarily global sockfs_setattr() staticTobias Klauser
Make sockfs_setattr() static as it is not used outside of net/socket.c This fixes the following GCC warning: net/socket.c:534:5: warning: no previous prototype for ‘sockfs_setattr’ [-Wmissing-prototypes] Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-10Merge tag 'wireless-drivers-for-davem-2017-01-10' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 Only two fixes at this time. The rtlwifi fix is an important one as it fixes a reported oops and Linus was already asking about it. The orinoco fix is not tested on a real device, because it's old legacy hardware and hardly no-one use it, but it should fix a (theoretical) issue with VMAP_STACK. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09md/raid5: Use correct IS_ERR() variation on pointer checkJes Sorensen
This fixes a build error on certain architectures, such as ppc64. Fixes: 6995f0b247e("md: takeover should clear unrelated bits") Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-09tcp: do not export tcp_peer_is_proven()Eric Dumazet
After commit 1fb6f159fd21 ("tcp: add tcp_conn_request"), tcp_peer_is_proven() no longer needs to be exported. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: phy: Add Meson GXL PHY hardware dependencyJean Delvare
As I understand it the Meson GXL PHY driver is only useful on one architecture so only make it visible on that architecture. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 7334b3e47aee ("net: phy: Add Meson GXL Internal PHY driver") Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net/appletalk: Fix kernel memory disclosureVlad Tsyrklevich
ipddp_route structs contain alignment padding so kernel heap memory is leaked when they are copied to user space in ipddp_ioctl(SIOCFINDIPDDPRT). Change kmalloc() to kzalloc() to clear that memory. Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09ipv4: make tcp_notsent_lowat sysctl knob behave as true unsigned intPavel Tikhomirov
> cat /proc/sys/net/ipv4/tcp_notsent_lowat -1 > echo 4294967295 > /proc/sys/net/ipv4/tcp_notsent_lowat -bash: echo: write error: Invalid argument > echo -2147483648 > /proc/sys/net/ipv4/tcp_notsent_lowat > cat /proc/sys/net/ipv4/tcp_notsent_lowat -2147483648 but in documentation we have "tcp_notsent_lowat - UNSIGNED INTEGER" v2: simplify to just proc_douintvec Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09ipv6: fix typosAlexander Alemayhu
o s/approriate/appropriate o s/discouvery/discovery Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge tag 'drm-fixes-for-v4.10-rc4' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "amdgpu, radeon, msm, meson, tilcdc, drm fixes. Just back online for a couple of days, gathered up the remaining fixes pull requests. This contains fixes for a few ARM platforms (msm, tilcdc, meson), and one core atomic fix. The AMD pull has some new hardware support (Polaris12) in it, but this is pretty limited to just hw enablement and shouldn't cause any problems" * tag 'drm-fixes-for-v4.10-rc4' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: drop verde dpm quirks drm/radeon: drop verde dpm quirks drm/radeon: update smc firmware selection for SI drm/amdgpu: update si kicker smc firmware drm/amd/powerplay: extend smu's response timeout time. drm/amdgpu: remove static integer for uvd pp state drm/amd/amdgpu: add Polaris12 PCI ID drm/amdgpu/powerplay: add Polaris12 support drm/amd/amdgpu: add Polaris12 support (v3) MAINTAINERS: Update mailing list for radeon and amdgpu drm/meson: Fix CVBS VDAC disable drm/meson: Fix CVBS initialization when HDMI is configured by bootloader drm: Clean up planes in atomic commit helper failure path drm: tilcdc: simplify the recovery from sync lost error on rev1 drm/meson: Fix plane atomic check when no crtc for the plane drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set drm/msm: Put back the vaddr in submit_reloc() drm/msm: Ensure that the hardware write pointer is valid
2017-01-09Merge tag 'gpio-v4.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - move freeing of GPIO hogs to after freeing the device to get rid of a warning state. - a small compile warning fix * tag 'gpio-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Move freeing of GPIO hogs before numbing of the device gpio: mxs: remove __init annotation
2017-01-09phy state machine: failsafe leave invalid RUNNING stateZefir Kurtisi
While in RUNNING state, phy_state_machine() checks for link changes by comparing phydev->link before and after calling phy_read_status(). This works as long as it is guaranteed that phydev->link is never changed outside the phy_state_machine(). If in some setups this happens, it causes the state machine to miss a link loss and remain RUNNING despite phydev->link being 0. This has been observed running a dsa setup with a process continuously polling the link states over ethtool each second (SNMPD RFC-1213 agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to call phy_read_status() and with that modify the link status - and with that bricking the phy state machine. This patch adds a fail-safe check while in RUNNING, which causes to move to CHANGELINK when the link is gone and we are still RUNNING. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix dumping of nft_quota entries, from Pablo Neira Ayuso. 2) Fix out of bounds access in nf_tables discovered by KASAN, from Florian Westphal. 3) Fix IRQ enabling in dp83867 driver, from Grygorii Strashko. 4) Fix unicast filtering in be2net driver, from Ivan Vecera. 5) tg3_get_stats64() can race with driver close and ethtool reconfigurations, fix from Michael Chan. 6) Fix error handling when pass limit is reached in bpf code gen on x86. From Daniel Borkmann. 7) Don't clobber switch ops and use proper MDIO nested reads and writes in bcm_sf2 driver, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) net: dsa: bcm_sf2: Utilize nested MDIO read/write net: dsa: bcm_sf2: Do not clobber b53_switch_ops net: stmmac: fix maxmtu assignment to be within valid range bpf: change back to orig prog on too many passes tg3: Fix race condition in tg3_get_stats64(). be2net: fix unicast list filling be2net: fix accesses to unicast list netlabel: add CALIPSO to the list of built-in protocols vti6: fix device register to report IFLA_INFO_KIND net: phy: dp83867: fix irq generation amd-xgbe: Fix IRQ processing when running in single IRQ mode sh_eth: R8A7740 supports packet shecksumming sh_eth: fix EESIPR values for SH77{34|63} r8169: fix the typo in the comment nl80211: fix sched scan netlink socket owner destruction bridge: netfilter: Fix dropping packets that moving through bridge interface netfilter: ipt_CLUSTERIP: check duplicate config when initializing netfilter: nft_payload: mangle ckecksum if NFT_PAYLOAD_L4CSUM_PSEUDOHDR is set netfilter: nf_tables: fix oob access netfilter: nft_queue: use raw_smp_processor_id() ...
2017-01-08Merge branch 'bcm_sf2-fixes'David S. Miller
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Couple fixes Here are a couple of fixes for bcm_sf2, please queue these up for -stable as well, thank you very much! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: dsa: bcm_sf2: Utilize nested MDIO read/writeFlorian Fainelli
We are implementing a MDIO bus which is behind another one, so use the nested version of the accessors to get lockdep annotations correct. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: dsa: bcm_sf2: Do not clobber b53_switch_opsFlorian Fainelli
We make the bcm_sf2 driver override ds->ops which points to b53_switch_ops since b53_switch_alloc() did the assignent. This is all well and good until a second b53 switch comes in, and ends up using the bcm_sf2 operations. Make a proper local copy, substitute the ds->ops pointer and then override the operations. Fixes: f458995b9ad8 ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge branch 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Fixes for 4.10: - Polaris 12 support - Add new amd-gfx mailing list to MAINTAINERS file - UVD clockgating fix - SI dpm fixes * 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: drop verde dpm quirks drm/radeon: drop verde dpm quirks drm/radeon: update smc firmware selection for SI drm/amdgpu: update si kicker smc firmware drm/amd/powerplay: extend smu's response timeout time. drm/amdgpu: remove static integer for uvd pp state drm/amd/amdgpu: add Polaris12 PCI ID drm/amdgpu/powerplay: add Polaris12 support drm/amd/amdgpu: add Polaris12 support (v3) MAINTAINERS: Update mailing list for radeon and amdgpu
2017-01-08net: stmmac: fix maxmtu assignment to be within valid rangeKweh, Hock Leong
There is no checking valid value of maxmtu when getting it from device tree. This resolution added the checking condition to ensure the assignment is made within a valid range. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge branch 'msm-fixes-4.10' of ↵Dave Airlie
git://people.freedesktop.org/~robclark/linux into drm-fixes A few fixes for 4.10.. the first fixes a long-standing logic bug, that by luck (ie. size of packets written into RB for a submit) wasn't hit on a3xx/a4xx but was causing intermittent GPU lockups on a5xx. And a couple other robustness issues that Jordan noticed. * 'msm-fixes-4.10' of git://people.freedesktop.org/~robclark/linux: drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set drm/msm: Put back the vaddr in submit_reloc() drm/msm: Ensure that the hardware write pointer is valid
2017-01-09Merge tag 'meson-drm-fixes-for-4.10' of ↵Dave Airlie
git://people.freedesktop.org/~narmstrong/linux into drm-fixes - plan atomic check oops fix - fix CVBS init when HDMI is configured by bootloader - fix CVBS VDAC disable * tag 'meson-drm-fixes-for-4.10' of git://people.freedesktop.org/~narmstrong/linux: drm/meson: Fix CVBS VDAC disable drm/meson: Fix CVBS initialization when HDMI is configured by bootloader drm/meson: Fix plane atomic check when no crtc for the plane
2017-01-09Merge tag 'tilcdc-4.10-fixes' of https://github.com/jsarha/linux into drm-fixesDave Airlie
tilcdc fixes for v4.10. * tag 'tilcdc-4.10-fixes' of https://github.com/jsarha/linux: drm: tilcdc: simplify the recovery from sync lost error on rev1
2017-01-09Merge tag 'drm-misc-fixes-2017-01-04' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-fixes single drm fix. * tag 'drm-misc-fixes-2017-01-04' of git://anongit.freedesktop.org/git/drm-misc: drm: Clean up planes in atomic commit helper failure path
2017-01-08Linux 4.10-rc3v4.10-rc3Linus Torvalds
2017-01-08bpf: change back to orig prog on too many passesDaniel Borkmann
If after too many passes still no image could be emitted, then swap back to the original program as we do in all other cases and don't use the one with blinding. Fixes: 959a75791603 ("bpf, x86: add support for constant blinding") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08Merge tag 'usb-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an artifact of the holiday break I think. Lots of gadget and the usual XHCI fixups for reported issues (one day that driver will calm down...) Also included are a bunch of usb-serial driver fixes, and for good measure, a number of much-reported MUSB driver issues have finally been resolved. All of these have been in linux-next with no reported issues" * tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits) USB: fix problems with duplicate endpoint addresses usb: ohci-at91: use descriptor-based gpio APIs correctly usb: storage: unusual_uas: Add JMicron JMS56x to unusual device usb: hub: Move hub_port_disable() to fix warning if PM is disabled usb: musb: blackfin: add bfin_fifo_offset in bfin_ops usb: musb: fix compilation warning on unused function usb: musb: Fix trying to free already-free IRQ 4 usb: musb: dsps: implement clear_ep_rxintr() callback usb: musb: core: add clear_ep_rxintr() to musb_platform_ops USB: serial: ti_usb_3410_5052: fix NULL-deref at open USB: serial: spcp8x5: fix NULL-deref at open USB: serial: quatech2: fix sleep-while-atomic in close USB: serial: pl2303: fix NULL-deref at open USB: serial: oti6858: fix NULL-deref at open USB: serial: omninet: fix NULL-derefs at open and disconnect USB: serial: mos7840: fix misleading interrupt-URB comment USB: serial: mos7840: remove unused write URB USB: serial: mos7840: fix NULL-deref at open USB: serial: mos7720: remove obsolete port initialisation USB: serial: mos7720: fix parallel probe ...
2017-01-08Merge tag 'char-misc-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are a few small char/misc driver fixes for 4.10-rc3. Two MEI driver fixes, and three NVMEM patches for reported issues, and a new Hyper-V driver MAINTAINER update. Nothing major at all, all have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: hyper-v: Add myself as additional MAINTAINER nvmem: fix nvmem_cell_read() return type doc nvmem: imx-ocotp: Fix wrong register size nvmem: qfprom: Allow single byte accesses for read/write mei: move write cb to completion on credentials failures mei: bus: fix mei_cldev_enable KDoc
2017-01-08Merge tag 'staging-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO fixes from Greg KH: "Here are some staging and IIO driver fixes for 4.10-rc3. Most of these are minor IIO fixes of reported issues, along with one network driver fix to resolve an issue. And a MAINTAINERS update with a new mailing list. All of these, except the MAINTAINERS file update, have been in linux-next with no reported issues (the MAINTAINERS patch happened on Friday...)" * tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: add greybus subsystem mailing list staging: octeon: Call SET_NETDEV_DEV() iio: accel: st_accel: fix LIS3LV02 reading and scaling iio: common: st_sensors: fix channel data parsing iio: max44000: correct value in illuminance_integration_time_available iio: adc: TI_AM335X_ADC should depend on HAS_DMA iio: bmi160: Fix time needed to sleep after command execution iio: 104-quad-8: Fix active level mismatch for the preset enable option iio: 104-quad-8: Fix off-by-one errors when addressing IOR iio: 104-quad-8: Fix index control configuration
2017-01-07tg3: Fix race condition in tg3_get_stats64().Michael Chan
The driver's ndo_get_stats64() method is not always called under RTNL. So it can race with driver close or ethtool reconfigurations. Fix the race condition by taking tp->lock spinlock in tg3_free_consistent() when freeing the tp->hw_stats memory block. tg3_get_stats64() is already taking tp->lock. Reported-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07be2net: fix unicast list fillingIvan Vecera
The adapter->pmac_id[0] item is used for primary MAC address but this is not true for adapter->uc_list[0] as is assumed in be_set_uc_list(). There are N UC addresses copied first from net_device to adapter->uc_list[1..N] and then N UC addresses from adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used instead. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: b717241 be2net: replace polling with sleeping in the FW completion path Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 05:00:58 +0000