summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-22sfc: Add flag for stack-owned RX MAC filtersBen Hutchings
MAC filters inserted on request from the stack (ndo_set_rx_mode) should allow manual steering but not removal. Currently we have a special case for Siena's all-multicast and all-unicast MAC filters, but on EF10 we need to allow for steering of precise MAC filters as well. The EFX_FILTER_FLAG_RX_STACK flag changes the behaviour of replacement and removal requests: - Replacement *of* a filter with this flag never clears the flag but does change steering and saved priority - Replacement *by* a filter with this flag only sets the flag but does not change steering - Removal with priority < EFX_FILTER_PRI_REQUIRED really resets RX steering and saved priority This could support precise MAC filtering on Siena in future. As a side-benefit, the default MAC filters are hidden from ethtool until they are steered. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-22sfc: Refactor Falcon-arch filter removalBen Hutchings
Move the special case for removal of default filters from efx_farch_filter_table_clear_entry() into a wrapper function, efx_farch_filter_table_remove(). Move the existence and priority checks into the latter and use it where appropriate. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-22sfc: Make most filter operations NIC-type-specificBen Hutchings
Aside from accelerated RFS, there is almost nothing that can be shared between the filter table implementations for the Falcon architecture and EF10. Move the few shared functions into efx.c and rx.c and the rest into farch.c. Introduce efx_nic_type operations for the implementation and inline wrapper functions that call these. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-22sfc: Refactor Falcon-arch search limit resetBen Hutchings
Currently every call to efx_farch_filter_table_clear_entry() is shortly followed by a conditional reset of the table limits. The new limits (0) are not pushed to hardware until the next filter insertion. Move both the reset and the hardware reconfiguration into efx_farch_filter_table_clear_entry(), and add an explanatory comment. Also, make consistent use of the term 'search limit' for the maximum number of probes the NIC must make when searching for a filter of a particular type. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-22sfc: Split Falcon-arch-specific and common filter stateBen Hutchings
Move the common state from struct efx_filter_state into struct efx_nic. Rename struct efx_filter_state to efx_farch_filter_state and change the type of efx_nic::filter_state to void *. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-22sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10Ben Hutchings
Replace type field with match_flags. Add rss_context and match values covering of most of what is now in the MCDI protocol. Change some fields into bitfields so that the structure size doesn't grow beyond 64 bytes. Ditch the filter decoding functions as it is now easier to pick apart the abstract structure. Rewrite ethtool NFC rule functions to set/get filter match flags and values directly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-22sfc: Name the RX drop queue IDBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-22sfc: Rename Falcon-arch filter implementation types and functionsBen Hutchings
The filter table(s) on EF10 are managed by firmware and will need almost entirely separate code. Rename the types and functions used within the existing implementation. The current definition of struct efx_filter_spec is really implementation-specific, so we need to keep it. For now, define a separate structure for the internal representation but leave them identical. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-22sfc: Remove unused filter_flags variables and efx_farch_filter_id_flags()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-22ath9k: Enable PLL fix only for AR9340/AR9330Sujith Manoharan
The PLL hang workaround is required only for AR9330 and AR9340. This issue was first observed on an AP121 and the WAR is enabled for AR9340 also (DB120 etc.), since it uses a PLL design identical to AR9330. This is not required for AR9485 and AR9550. Various bugs have been reported regarding this: https://bugzilla.redhat.com/show_bug.cgi?id=997217 https://bugzilla.redhat.com/show_bug.cgi?id=994648 Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22ath9k_htc: Restore skb headroom when returning skb to mac80211Helmut Schaa
ath9k_htc adds padding between the 802.11 header and the payload during TX by moving the header. When handing the frame back to mac80211 for TX status handling the header is not moved back into its original position. This can result in a too small skb headroom when entering ath9k_htc again (due to a soft retransmission for example) causing an skb_under_panic oops. Fix this by moving the 802.11 header back into its original position before returning the frame to mac80211 as other drivers like rt2x00 or ath5k do. Reported-by: Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22spi: bcm2835: Add spi_master_get() call to prevent use after freeAxel Lin
The call to spi_unregister_master results in device memory being freed, it must no longer be accessed afterwards. Thus call spi_master_get() to get an extra reference to the device and call spi_master_put() only after the last access to device data. Note, current code has an extra spi_master_put() call in bcm2835_spi_remove(). Thus this patch just adds an spi_master_get() to balance the reference count. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22spi: Remove a redundant test for master->running in spi_queued_transferAxel Lin
We have tested master->running immediately after grab the master->queue_lock. The status of master->running won't be changed until we release the lock. Thus remove a redundant test for master->running. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22w1: slaves: w1_ds2781: convert to use w1_family_ops.groupsGreg Kroah-Hartman
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2760: convert to use w1_family_ops.groupsGreg Kroah-Hartman
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2780: convert to use w1_family_ops.groupsGreg Kroah-Hartman
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds28e04: convert to use w1_family_ops.groupsGreg Kroah-Hartman
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2433: convert to use w1_family_ops.groupsGreg Kroah-Hartman
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2431: convert to use w1_family_ops.groupsGreg Kroah-Hartman
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2423: convert to use w1_family_ops.groupsGreg Kroah-Hartman
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2413.c: convert to use w1_family_ops.groupsGreg Kroah-Hartman
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_ds2408: convert to use w1_family_ops.groupsGreg Kroah-Hartman
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: slaves: w1_therm: convert to use w1_family_ops.groupsGreg Kroah-Hartman
This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: David Stevenson <david@avoncliff.com> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Michael Arndt <michael@scriptkiller.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: add attribute groups to struct w1_family_opsGreg Kroah-Hartman
This lets w1 slave drivers declare an attribute group, and not have to create/destroy sysfs files directly. All w1 slave drivers will be fixed to use this field up in follow-on patches to this one. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22spi: conditional checking of mode and transfer bits.Sourav Poddar
There is a bug in the following patch: http://comments.gmane.org/gmane.linux.kernel.spi.devel/14420 spi: DUAL and QUAD support fix the previous patch some mistake below: 1. DT in slave node, use "spi-tx-nbits = <1/2/4>" in place of using "spi-tx-dual, spi-tx-quad" directly, same to rx. So correct the previous way to get the property in @of_register_spi_devices(). 2. Change the value of transfer bit macro(SPI_NBITS_SINGLE, SPI_NBITS_DUAL SPI_NBITS_QUAD) to 0x01, 0x02 and 0x04 to match the actual wires. 3. Add the following check (1)keep the tx_nbits and rx_nbits in spi_transfer is not beyond the single, dual and quad. (2)keep tx_nbits and rx_nbits are contained by @spi_device->mode example: if @spi_device->mode = DUAL, then tx/rx_nbits can not be set to QUAD(SPI_NBITS_QUAD) (3)if "@spi_device->mode & SPI_3WIRE", then tx/rx_nbits should be in single(SPI_NBITS_SINGLE) Checking of the tx/rx transfer bits and mode bits should be done conditionally based on type of buffer filled else EINVAL condition will always get hit either for rx or tx. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22w1: use default attribute groups for w1 slave devicesGreg Kroah-Hartman
As we have 2 sysfs files for the w1 slave devices, let the driver core create / destroy them automatically by setting the default attribute group for them, saving code and housekeeping logic. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22w1: remove race with sysfs file creationGreg Kroah-Hartman
W1 slave sysfs files are created _after_ userspace is notified that the device has been added to the system. Fix that race by moving the creation/remove of the files to the bus notifier that is there for doing this type of thing. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: dgap: adds driver to kernel buildLidza Louina
This patch adds the dgap driver to the kernel build process. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A handful of fixes for 3.11 are still trickling in. These are: - A couple of fixes for older OMAP platforms - Another few fixes for at91 (lateish due to European summer vacations) - A late-found problem with USB on Tegra, fix is to keep VBUS regulator on at all times - One fix for Exynos 5440 dealing with CPU detection - One MAINTAINERS update" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: always enable USB VBUS regulators ARM: davinci: nand: specify ecc strength ARM: OMAP: rx51: change musb mode to OTG ARM: OMAP2: fix musb usage for n8x0 MAINTAINERS: Update email address for Benoit Cousson ARM: at91/DT: fix at91sam9n12ek memory node ARM: at91: add missing uart clocks DT entries ARM: SAMSUNG: fix to support for missing cpu specific map_io ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C
2013-08-22Merge tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linuxLinus Torvalds
Pull device tree fix from Rob Herring: "For DT unflattening, add missing memory initialization. This is needed for arches like PPC that use memblock_alloc. This appears to have been an issue for some time, but is a somewhat limited usecase of OF_DYNAMIC" * tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linux: of: fdt: fix memory initialization for expanded DT
2013-08-22Merge tag 'dm-3.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "A patch to fix dm-cache-policy-mq's remove_mapping() conflict with sparc32" * tag 'dm-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: avoid conflicting remove_mapping() in mq policy
2013-08-22powerpc/kvm: Copy the pvr value after memsetAneesh Kumar K.V
Otherwise we would clear the pvr value Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-08-22sysfs.h: remove attr_name() macroGreg Kroah-Hartman
Gotta love a macro that doesn't reduce the typing you have to do. Also, only the driver core, and one network driver uses this. The driver core functions will be going away soon, and I'll convert the network driver soon to not need this as well, so delete it for now before anyone else gets some bright ideas and wants to use it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Turn on build of new driverLarry Finger
This commit modifies drivers/staging/Makefile, and adds the drivers/staging/rtl8188eu/Makefile. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 31Larry Finger
This commit adds files include/sta_info.h, include/usb_hal.h, include/usb_ops.h, include/usb_ops_linux.h, include/usb_osintf.h, include/usb_vendor_req.h, include/wifi.h, include/wlan_bssdef.h, and include/xmit_osdep.h. The commit also deleted include/autoconf.h, which is no longer needed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Insert Kconfig files for new driverLarry Finger
The configuration options include those to add code needed for AP mode, and peer-to-peer mode. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 30Larry Finger
This commit adds files include/rtw_security.h, include/rtw_sreset.h, include/rtw_version.h, and include/rtw_xmit.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 29Larry Finger
This commit adds files include/rtw_p2p.h, include/rtw_pwrctrl.h, include/rtw_qos.h, include/rtw_recv.h, and include/rtw_rf.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 28Larry Finger
This commit adds files include/rtw_mlme.h, include/rtw_mlme_ext.h, include/rtw_mp.h, include/rtw_mp_ioctl.h, and include/rtw_mp_phy_regdef.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 27Larry Finger
This commit adds files include/rtw_ht.h, include/rtw_io.h, include/rtw_ioctl.h, include/rtw_ioctl_rtl.h, include/rtw_ioctl_set.h, include/rtw_iol.h, and include/rtw_led.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 26Larry Finger
This commit adds files include/rtw_android.h, include/rtw_ap.h, include/rtw_br_ext.h, include/rtw_cmd.h, include/rtw_debug.h, include/rtw_eeprom.h, include/rtw_efuse.h, and include/rtw_event.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 25Larry Finger
This commit adds files include/recv_osdep.h, include/rtl8188e_cmd.h, include/rtl8188e_dm.h, include/rtl8188e_hal.h, include/rtl8188e_led.h, include/rtl8188e_recv.h, include/rtl8188e_rf.h, include/rtl8188e_spec.h, include/rtl8188e_sreset.h, and include/rtl8188e_xmit.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 24Larry Finger
This commit adds files include/odm.h, include/odm_HWConfig.h, include/odm_RTL8188E.h, include/odm_RegConfig8188E.h, include/odm_RegDefine11AC.h, include/odm_RegDefine11N.h, include/odm_debug.h, include/odm_interface.h, include/odm_precomp.h, include/odm_reg.h, include/odm_types.h, include/osdep_intf.h, and include/osdep_service.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 23Larry Finger
This commit adds files include/ieee80211.h, include/ieee80211_ext.h, include/if_ether.h, include/ioctl_cfg80211.h, include/ip.h, include/mlme_osdep.h, include/mp_custom_oid.h, and include/nic_spec.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 22Larry Finger
This commit adds files include/Hal8188EFWImg_CE.h, include/Hal8188EPhyCfg.h, include/Hal8188EPhyReg.h, include/Hal8188EPwrSeq.h, include/Hal8188ERateAdaptive.h, include/Hal8188EReg.h, include/HalHWImg8188E_BB.h, include/HalHWImg8188E_FW.h, include/HalHWImg8188E_MAC.h, include/HalHWImg8188E_RF.h, include/HalPhyRf.h, include/HalPhyRf_8188e.h, include/HalPwrSeqCmd.h, and include/HalVerDef.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 21Larry Finger
This commit adds files include/autoconf.h, include/basic_types.h, include/cmd_osdep.h, include/drv_types.h, include/drv_types_linux.h, include/ethernet.h. include/h2clbk.h, include/hal_com.h, and include/hal_intf.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 20Larry Finger
This commit adds files os_dep/usb_intf.c, os_dep/usb_ops_linux.c, and os_dep/xmit_linux.c. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 19Larry Finger
This commit adds files os_dep/os_intfs.c, os_dep/recv_linux.c, and os_dep/rtw_android.c. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 18Larry Finger
This commit adds files hal/usb_halinit.c and hal/usb_ops_linux.c. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22staging: r8188eu: Add files for new driver - part 17Larry Finger
This commit adds files hal/rtl8188eu_led.c, hal/rtl8188eu_recv.c, and hal/rtl8188eu_xmit.c. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-22 16:30:06 +0000