summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-21arm64: Fix EL1/EL2 early init inconsistencies with VHEDave Martin
When using the Virtualisation Host Extensions, EL1 is not used in the host and requires no separate configuration. In addition, with VHE enabled, non-hyp-specific EL2 configuration that does not need to be done early will be done anyway in __cpu_setup via the _EL1 system register aliases. In particular, the layout and definition of CPTR_EL2 are changed by enabling VHE so that they resemble CPACR_EL1, so existing code to initialise CPTR_EL2 becomes architecturally wrong in this case. This patch simply skips the affected initialisation code in the non-VHE case. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-04-21PM / Runtime: Fix error path in pm_runtime_force_resume()Ulf Hansson
As pm_runtime_set_active() may fail because the device's parent isn't active, we can end up executing the ->runtime_resume() callback for the device when it isn't allowed. Fix this by invoking pm_runtime_set_active() before running the callback and let's also deal with the error code. Fixes: 37f204164dfb (PM: Add pm_runtime_suspend|resume_force functions) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-21arm64/dma-mapping: Remove default domain workaroundRobin Murphy
With the IOMMU core now taking care of default domains for groups regardless of bus type, we can gleefully rip out this stop-gap, as slight recompense for having to expand the other one. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-21arm64/dma-mapping: Extend DMA ops workaround to PCI devicesRobin Murphy
PCI devices now suffer the same hiccup as platform devices, in that they get their DMA ops configured before they have been added to their bus, and thus before we know whether they have successfully registered with an IOMMU or not. Until the necessary driver core changes to reorder calls during device creation have been worked out, extend our delayed notifier trick onto the PCI bus so as to avoid broken DMA ops once IOMMUs get plugged into the PCI code. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-21ALSA: hda - Fix possible race on regmap bypass flipTakashi Iwai
HD-audio driver uses regmap cache bypass feature for reading a raw value without the cache. But this is racy since both the cached and the uncached reads may occur concurrently. The former is done via the normal control API access while the latter comes from the proc file read. Even though the regmap itself has the protection against the concurrent accesses, the flag set/reset is done without the protection, so it may lead to inconsistent state of bypass flag that doesn't match with the current read and occasionally result in a kernel WARNING like: WARNING: CPU: 3 PID: 2731 at drivers/base/regmap/regcache.c:499 regcache_cache_only+0x78/0x93 One way to work around such a problem is to wrap with a mutex. But in this case, the solution is simpler: for the uncached read, we just skip the regmap and directly calls its accessor. The verb execution there is protected by itself, so basically it's safe to call individually. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-21Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Three further fixes for ARM. Alexandre Courbot was having problems with DMA allocations with the GFP flags affecting where the tracking data was being allocated from. Vladimir Murzin noticed that the CPU feature code was not entirely correct, which can cause some features to be misreported" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8564/1: fix cpu feature extracting helper ARM: 8563/1: fix demoting HWCAP_SWP ARM: 8551/2: DMA: Fix kzalloc flags in __dma_alloc
2016-04-21ALSA: pcxhr: Fix missing mutex unlockTakashi Iwai
The commit [9bef72bdb26e: ALSA: pcxhr: Use nonatomic PCM ops] converted to non-atomic PCM ops, but shamelessly with an unbalanced mutex locking, which leads to the hangup easily. Fix it. Fixes: 9bef72bdb26e ('ALSA: pcxhr: Use nonatomic PCM ops') Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116441 Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-21Merge tag 'fbdev-fixes-4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - ARM CLCD: fix regression on multiplatform kernels - panel-sharp-ls037v7dw01: fix possible NULL deref * tag 'fbdev-fixes-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: omapfb: panel-sharp-ls037v7dw01: fix check of gpio_to_desc() return value video: ARM CLCD: runtime check for Versatile
2016-04-21Merge tag 'platform-drivers-x86-v4.6-2' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "An S4 fix for intel-hid, new platform 'quirk' for hp_accel, a fix for broader support of ACPI resources for the Intel P-unit, and a few uninitialized variable fixes. intel p-unit: - decouple telemetry driver from the optional IPC resources thinkpad_acpi: - Silence an uninitialized variable warning intel_telemetry_pltdrv: - Silence an uninitialized variable warning hp_accel: - Silence an uninitialized variable warning - Add support for HP ProBook 440 G3 intel-hid: - add a workaround to ignore an event after waking up from S4" * tag 'platform-drivers-x86-v4.6-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform:x86 decouple telemetry driver from the optional IPC resources thinkpad_acpi: Silence an uninitialized variable warning intel_telemetry_pltdrv: Silence an uninitialized variable warning hp_accel: Silence an uninitialized variable warning hp_accel: Add support for HP ProBook 440 G3 intel-hid: add a workaround to ignore an event after waking up from S4.
2016-04-21iommu/arm-smmu: Don't allocate resources for bypass domainsRobin Murphy
Until we get fully plumbed into of_iommu_configure, our default IOMMU_DOMAIN_DMA domains just bypass translation. Since we achieve that by leaving the stream table entries set to bypass instead of pointing at a translation context, the context bank we allocate for the domain is completely wasted. Context banks are typically a rather limited resource, so don't hog ones we don't need. Reported-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-21iommu/arm-smmu: Fix stream-match conflict with IOMMU_DOMAIN_DMAWill Deacon
Commit cbf8277ef456 ("iommu/arm-smmu: Treat IOMMU_DOMAIN_DMA as bypass for now") ignores requests to attach a device to the default domain since, without IOMMU-basked DMA ops available everywhere, the default domain will just lead to unexpected transaction faults being reported. Unfortunately, the way this was implemented on SMMUv2 causes a regression with VFIO PCI device passthrough under KVM on AMD Seattle. On this system, the host controller device is associated with both a pci_dev *and* a platform_device, and can therefore end up with duplicate SMR entries, resulting in a stream-match conflict at runtime. This patch amends the original fix so that attaching to IOMMU_DOMAIN_DMA is rejected even before configuring the SMRs. This restores the old behaviour for now, but we'll need to look at handing host controllers specially when we come to supporting the default domain fully. Reported-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Tested-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-21drivers/perf: arm-pmu: fix RCU usage on pmu resume from low-powerLorenzo Pieralisi
Commit da4e4f18afe0 ("drivers/perf: arm_pmu: implement CPU_PM notifier") added code in the arm perf infrastructure that allows the kernel to save/restore perf counters whenever the CPU enters a low-power state. The kernel saves/restores the counters for each active event through the armpmu_{stop/start} ARM pmu API, so that the low-power state enter/exit cycle is emulated through pmu start/stop operations for each event in use. However, calling armpmu_start() for each active event on power up executes code that requires RCU locking (perf_event_update_userpage()) to be functional, so, given that the core may call the CPU_PM notifiers while running the idle thread in an quiescent RCU state this is not allowed as detected through the following splat when kernel is run with CONFIG_PROVE_LOCKING enabled: [ 49.293286] [ 49.294761] =============================== [ 49.298895] [ INFO: suspicious RCU usage. ] [ 49.303031] 4.6.0-rc3+ #421 Not tainted [ 49.306821] ------------------------------- [ 49.310956] include/linux/rcupdate.h:872 rcu_read_lock() used illegally while idle! [ 49.318530] [ 49.318530] other info that might help us debug this: [ 49.318530] [ 49.326451] [ 49.326451] RCU used illegally from idle CPU! [ 49.326451] rcu_scheduler_active = 1, debug_locks = 0 [ 49.337209] RCU used illegally from extended quiescent state! [ 49.342892] 2 locks held by swapper/2/0: [ 49.346768] #0: (cpu_pm_notifier_lock){......}, at: [<ffffff8008163c28>] cpu_pm_exit+0x18/0x80 [ 49.355492] #1: (rcu_read_lock){......}, at: [<ffffff800816dc38>] perf_event_update_userpage+0x0/0x260 This patch wraps the armpmu_start() call (that indirectly calls perf_event_update_userpage()) on CPU_PM notifier power state exit (or failed entry) within the RCU_NONIDLE() macro so that the RCU subsystem is made aware the calling cpu is not idle from an RCU perspective for the armpmu_start() call duration, therefore fixing the issue. Fixes: da4e4f18afe0 ("drivers/perf: arm_pmu: implement CPU_PM notifier") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reported-by: James Morse <james.morse@arm.com> Suggested-by: Kevin Hilman <khilman@baylibre.com> Cc: Ashwin Chaugule <ashwin.chaugule@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-04-21firmware: qemu_fw_cfg.c: potential unintialized variableDan Carpenter
It acpi_acquire_global_lock() return AE_NOT_CONFIGURED then "glk" isn't initialized, which, if you got very unlucky, could cause a bug. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-21drm/etnaviv: don't move linear memory window on 3D cores without MC2.0Lucas Stach
On cores with MC1.0 the memory window offset is not properly respected by all engines in the core, leading to different views of the memory if the offset in non-zero. This causes relocs for those engines to be wrong and might lead to other subtile problems. Rather than trying to work around this, just disable the linear memory window offset for those cores. Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-04-21Merge tag 'iwlwifi-for-kalle-2016-04-12_2' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * add new device IDs for 8265 * fix a NULL pointer dereference when paging firmware asserts * remove a WARNING on gscan capabilities * fix MODULE_FIRMWARE for 8260
2016-04-21genirq: Dont allow affinity mask to be updated on IPIsMatt Redfearn
The IPI domain re-purposes the IRQ affinity to signify the mask of CPUs that this IPI will deliver to. This must not be modified before the IPI is destroyed again, so set the IRQ_NO_BALANCING flag to prevent the affinity being overwritten by setup_affinity(). Without this, if an IPI is reserved for a single target CPU, then allocated using __setup_irq(), the affinity is overwritten with cpu_online_mask. When ipi_destroy() is subsequently called on a multi-cpu system, it will attempt to free cpumask_weight() IRQs that were never allocated, and crash. Fixes: d17bf24e6952 ("genirq: Add a new generic IPI reservation code to irq core") Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: ralf@linux-mips.org Cc: Qais Yousef <qsyousef@gmail.com> Cc: lisa.parratt@imgtec.com Link: http://lkml.kernel.org/r/1461229712-13057-1-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-21asm-generic/futex: Re-enable preemption in futex_atomic_cmpxchg_inatomic()Romain Perier
The recent decoupling of pagefault disable and preempt disable added an explicit preempt_disable/enable() pair to the futex_atomic_cmpxchg_inatomic() implementation in asm-generic/futex.h. But it forgot to add preempt_enable() calls to the error handling code pathes, which results in a preemption count imbalance. This is observable on boot when the test for atomic_cmpxchg() is calling futex_atomic_cmpxchg_inatomic() on a NULL pointer. Add the missing preempt_enable() calls to the error handling code pathes. [ tglx: Massaged changelog ] Fixes: d9b9ff8c1889 ("sched/preempt, futex: Disable preemption in UP futex_atomic_cmpxchg_inatomic() explicitly") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Cc: linux-arch@vger.kernel.org Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1460640963-690-1-git-send-email-romain.perier@free-electrons.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-21futex: Acknowledge a new waiter in counter before plistDavidlohr Bueso
Otherwise an incoming waker on the dest hash bucket can miss the waiter adding itself to the plist during the lockless check optimization (small window but still the correct way of doing this); similarly to the decrement counterpart. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: bigeasy@linutronix.de Cc: dvhart@infradead.org Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1461208164-29150-1-git-send-email-dave@stgolabs.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-21s390/mm: fix asce_bits handling with dynamic pagetable levelsGerald Schaefer
There is a race with multi-threaded applications between context switch and pagetable upgrade. In switch_mm() a new user_asce is built from mm->pgd and mm->context.asce_bits, w/o holding any locks. A concurrent mmap with a pagetable upgrade on another thread in crst_table_upgrade() could already have set new asce_bits, but not yet the new mm->pgd. This would result in a corrupt user_asce in switch_mm(), and eventually in a kernel panic from a translation exception. Fix this by storing the complete asce instead of just the asce_bits, which can then be read atomically from switch_mm(), so that it either sees the old value or the new value, but no mixture. Both cases are OK. Having the old value would result in a page fault on access to the higher level memory, but the fault handler would see the new mm->pgd, if it was a valid access after the mmap on the other thread has completed. So as worst-case scenario we would have a page fault loop for the racing thread until the next time slice. Also remove dead code and simplify the upgrade/downgrade path, there are no upgrades from 2 levels, and only downgrades from 3 levels for compat tasks. There are also no concurrent upgrades, because the mmap_sem is held with down_write() in do_mmap, so the flush and table checks during upgrade can be removed. Reported-by: Michael Munday <munday@ca.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-21s390/pci: fix use after free in dma_initSebastian Ott
After a failure during registration of the dma_table (because of the function being in error state) we free its memory but don't reset the associated pointer to zero. When we then receive a notification from firmware (about the function being in error state) we'll try to walk and free the dma_table again. Fix this by resetting the dma_table pointer. In addition to that make sure that we free the iommu_bitmap when appropriate. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-20thermal: fix Mediatek thermal controller buildJohannes Berg
At least with CONFIG_COMPILE_TEST, there's no reason to assume that CONFIG_RESET_CONTROLLER is set, but the code for this controller requires it since it calls device_reset(). Make CONFIG_MTK_THERMAL properly depend on CONFIG_RESET_CONTROLLER. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: consistently use int for trip tempWei Ni
The commit 17e8351a7739 consistently use int for temperature, however it missed a few in trip temperature and thermal_core. In current codes, the trip->temperature used "unsigned long" and zone->temperature used"int", if the temperature is negative value, it will get wrong result when compare temperature with trip temperature. This patch can fix it. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: fix mtk_thermal build dependencyRandy Dunlap
Fix build errors when MTK_THERMAL=y and NVMEM=m by preventing that Kconfig combination. drivers/built-in.o: In function `mtk_thermal_probe': mtk_thermal.c:(.text+0xffa8f): undefined reference to `nvmem_cell_get' mtk_thermal.c:(.text+0xffabe): undefined reference to `nvmem_cell_read' mtk_thermal.c:(.text+0xffac9): undefined reference to `nvmem_cell_put' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: <linux-pm@vger.kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Hanyi Wu <hanyi.wu@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: minor mtk_thermal.c cleanupsRandy Dunlap
Trivial cleanups: - delete one duplicate #include - end email address with closing '>' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Hanyi Wu <hanyi.wu@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: power_allocator: req_range multiplication should be a 64 bit typeJavi Merino
req_range is declared as a u64 to cope with overflows in the multiplication of two u32. As both req_power and power_range are u32, we need to make sure the multiplication is done with u64 types. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: of: add __init attributeJulia Lawall
Add __init attribute on a function that is only called from other __init functions and that is not inlined, at least with gcc version 4.8.4 on an x86 machine with allyesconfig. Currently, the function is put in the .text.unlikely segment. Declaring it as __init will cause it to be put in the .init.text and to disappear after initialization. The result of objdump -x on the function before the change is as follows: 0000000000000086 l F .text.unlikely 0000000000000739 thermal_of_build_thermal_zone And after the change it is as follows: 0000000000000000 l F .init.text 0000000000000734 thermal_of_build_thermal_zone Done with the help of Coccinelle. The semantic patch checks for local static non-init functions that are called from an __init function and are not called from any other function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20Input: twl4030-vibra - do not reparent to grandparentDmitry Torokhov
For devm-managed input devices we should not modify input device's parent, otherwise automatic release of resources will not work properly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-20Input: twl6040-vibra - do not reparent to grandparentDmitry Torokhov
For devm-managed input devices we should not modify input device's parent, otherwise automatic release of resources will not work properly. Tested-by: "H. Nikolaus Schaller" <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-20[media] davinci_vpfe: Revert "staging: media: davinci_vpfe: ↵Hans Verkuil
remove,unnecessary ret variable" This reverts commit afa5d19a2b5f ("staging: media: davinci_vpfe: remove unnecessary ret variable"). This patch is completely bogus and messed up the code big time. I'm not sure what was intended, but this isn't it. Cc: Thaissa Falbo <thaissa.falbo@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-20Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Incorrect output buffer size calculation in rsa-pkcs1pad - Uninitialised padding bytes on exported state in ccp driver - Potentially freed pointer used on completion callback in sha1-mb" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccp - Prevent information leakage on export crypto: sha1-mb - use corrcet pointer while completing jobs crypto: rsa-pkcs1pad - fix dst len
2016-04-20[media] usbvision: revert commit 588afcc1Vladis Dronov
Commit 588afcc1c0e4 ("[media] usbvision fix overflow of interfaces array")' should be reverted, because: * "!dev->actconfig->interface[ifnum]" won't catch a case where the value is not NULL but some garbage. This way the system may crash later with GPF. * "(ifnum >= USB_MAXINTERFACES)" does not cover all the error conditions. "ifnum" should be compared to "dev->actconfig-> desc.bNumInterfaces", i.e. compared to the number of "struct usb_interface" kzalloc()-ed, not to USB_MAXINTERFACES. * There is a "struct usb_device" leak in this error path, as there is usb_get_dev(), but no usb_put_dev() on this path. * There is a bug of the same type several lines below with number of endpoints. The code is accessing hard-coded second endpoint ("interface->endpoint[1].desc") which may not exist. It would be great to handle this in the same patch too. * All the concerns above are resolved by already-accepted commit fa52bd50 ("[media] usbvision: fix crash on detecting device with invalid configuration") * Mailing list message: http://www.spinics.net/lists/linux-media/msg94832.html Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.5 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-20regulator: core: Use a bitfield for continuous_voltage_rangeMark Brown
Using a bitfield enables the compiler to lay out the structure more efficiently when we have other boolean flags since multiple values can be included in a single byte. Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-20regulator: tps6524x: Fix broken use of spi_dev_get()Mark Brown
The tps6524x driver uses spi_dev_get() to take a copy of the SPI device it uses but has no obvious reason to do so and never calls spi_dev_put() to release the reference. Fix this to just a straight copy. Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-20regulator: ti-abb: DT spelling s/#{address,size}-cell/#{address,size}-cells/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-20Revert "Prevent NUll pointer dereference with two PHYs on cpsw"Andrew Goodbody
This reverts commit cfe255600154f0072d4a8695590dbd194dfd1aeb This can result in a "Unable to handle kernel paging request" during boot. This was due to using an uninitialised struct member, data->slaves. Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20arm64: compat: Check for AArch32 stateSuzuki K Poulose
Make sure we have AArch32 state available for running COMPAT binaries and also for switching the personality to PER_LINUX32. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> [ Added cap bit, checks for HWCAP, personality ] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-20arm64: cpufeature: Track 32bit EL0 supportSuzuki K Poulose
Add cpu_hwcap bit for keeping track of the support for 32bit EL0. Tested-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-20arm64: cpufeature: Check availability of AArch32Suzuki K Poulose
On ARMv8 support for AArch32 state is optional. Hence it is not safe to check the AArch32 ID registers for sanity, which could lead to false warnings. This patch makes sure that the AArch32 state is implemented before we keep track of the 32bit ID registers. As per ARM ARM (D.1.21.2 - Support for Exception Levels and Execution States, DDI0487A.h), checking the support for AArch32 at EL0 is good enough to check the support for AArch32 (i.e, AArch32 at EL1 => AArch32 at EL0, but not vice versa). Tested-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-20arm64: Add helpers for detecting AArch32 support at EL0Suzuki K Poulose
Adds a helper to extract the support for AArch32 at EL0 Tested-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-20arm64: HWCAP: Split COMPAT HWCAP table entriesSuzuki K Poulose
In order to handle systems which do not support 32bit at EL0, split the COMPAT HWCAP entries into a separate table which can be processed, only if the support is available. Tested-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-20arm64: hwcaps: Cleanup namingSuzuki K Poulose
We use hwcaps for referring to ELF hwcaps capability information. However this can be confusing with 'cpu_hwcaps' which stands for the CPU capability bit field. This patch cleans up the names to make it a bit more readable. Tested-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-20arm64: asm: remove unused push/pop macrosMark Rutland
We haven't used the push/pop macros for a while now, as it's typically better to use immediate offsets for batches of accesses to the stack, as we now do in the entry assembly for the kernel and hyp code. Remove the unused macros. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-20arm64: Kconfig: remove redundant HAVE_ARCH_TRANSPARENT_HUGEPAGE definitionYang Shi
HAVE_ARCH_TRANSPARENT_HUGEPAGE has been defined in arch/Kconfig already, the ARM64 version is identical with it and the default value is Y. So remove the redundant definition and just select it under CONFIG_ARM64. Signed-off-by: Yang Shi <yang.shi@linaro.org> [will: sort into alphabetical order whilst I'm resolving conflicts] Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-20futex: Handle unlock_pi race gracefullySebastian Andrzej Siewior
If userspace calls UNLOCK_PI unconditionally without trying the TID -> 0 transition in user space first then the user space value might not have the waiters bit set. This opens the following race: CPU0 CPU1 uval = get_user(futex) lock(hb) lock(hb) futex |= FUTEX_WAITERS .... unlock(hb) cmpxchg(futex, uval, newval) So the cmpxchg fails and returns -EINVAL to user space, which is wrong because the futex value is valid. To handle this (yes, yet another) corner case gracefully, check for a flag change and retry. [ tglx: Massaged changelog and slightly reworked implementation ] Fixes: ccf9e6a80d9e ("futex: Make unlock_pi more robust") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Darren Hart <dvhart@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1460723739-5195-1-git-send-email-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-20regulator: fan53555: Add support for FAN53555UC13X typeWadim Egorov
IC type options 00, 13 and 23 are sharing the same DIE_ID 0. Let's differentiate between these revisions. FAN53555UC13X has the ID 0 and REV 0xf, starts at 800mV and increments in 10mV steps. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-20regulator: fan53555: Add support for FAN53555BUC18X typeWadim Egorov
FAN53555BUC18X has the DIE_ID 8, starts at 600mV and increments in 10mV steps. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-20crypto: marvell/cesa - Improving code readabilityRomain Perier
When looking for available engines, the variable "engine" is assigned to "&cesa->engines[i]" at the beginning of the for loop. Replacing next occurences of "&cesa->engines[i]" by "engine" and in order to improve readability. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-20crypto: s5p-sss - Remove useless hash interrupt handlerKrzysztof Kozlowski
Beside regular feed control interrupt, the driver requires also hash interrupt for older SoCs (samsung,s5pv210-secss). However after requesting it, the interrupt handler isn't doing anything with it, not even clearing the hash interrupt bit. Driver does not provide hash functions so it is safe to remove the hash interrupt related code and to not require the interrupt in Device Tree. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-20crypto: s5p-sss - Fix use after free of copied input buffer in error pathKrzysztof Kozlowski
The driver makes copies of memory (input or output scatterlists) if they are not aligned. In s5p_aes_crypt_start() error path (on unsuccessful initialization of output scatterlist), if input scatterlist was not aligned, the driver first freed copied input memory and then unmapped it from the device, instead of doing otherwise (unmap and then free). This was wrong in two ways: 1. Freed pages were still mapped to the device. 2. The dma_unmap_sg() iterated over freed scatterlist structure. The call to s5p_free_sg_cpy() in this error path is not needed because the copied scatterlists will be freed by s5p_aes_complete(). Fixes: 9e4a1100a445 ("crypto: s5p-sss - Handle unaligned buffers") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-20crypto: ccp - Register the CCP as a DMA resourceGary R Hook
The CCP has the ability to provide DMA services to the kernel using pass-through mode of the device. Register these services as general purpose DMA channels. Changes since v2: - Add a Signed-off-by Changes since v1: - Allocate memory for a string in ccp_dmaengine_register - Ensure register/unregister calls are properly ordered - Verified all changed files are listed in the diffstat - Undo some superfluous changes - Added a cc: Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-09-20 20:56:01 +0000