summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-10drm/amd/display: Fix Compile-time WarningDavid Galiffi
Fixed bracketing around condition statement. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Allow alternate prefetch modes in DML for DCN32David Galiffi
[Why] Driver is restricting voltage levels if system cannot switch in vblank. [How] Change allow_for_pstate_or_stutter_in_vblank_final from dm_prefetch_support_uclk_fclk_and_stutter to dm_prefetch_support_uclk_fclk_and_stutter_if_possible. Add support for a new registry property, DalDMLDisallowAlternatePrefetchModes, for easier debugging. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Fix HDMI VSIF V3 incorrect issueLeo Ma
[Why] Reported from customer the checksum in AMD VSIF V3 is incorrect and causing blank screen issue. [How] Fix the packet length issue on AMD HDMI VSIF V3. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Avoid MPC infinite loopJosip Pavic
[Why] In some cases MPC tree bottom pipe ends up point to itself. This causes iterating from top to bottom to hang the system in an infinite loop. [How] When looping to next MPC bottom pipe, check that the pointer is not same as current to avoid infinite loop. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Device flash garbage before get in OSChiawen Huang
[Why] Enabling stream with tg lock makes config settings pending causing the garbage until tg unlock. [How] Keep the original lock mechanism The driver doesn't lock tg if plane_state is null. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Fix TMDS 4K@60Hz YCbCr420 corruption issueDaniel Miess
[Why] DIG_FIFO_OUTPUT_PIXEL_MODE not being set for dcn314 resulting in incorrect timing for YCbCr4:2:0 [How] Copy the implementation of set_pixels_per_cycle from dcn32 over to dcn314 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Add a variable to update FCLK latencyAlvin Lee
[Description] Add a variable to update FCLK latency Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: fix CAB allocation for multiple displaysAurabindo Pillai
[Why & How] When multiple displays are used, the underlying framebuffers could be two separate framebuffers, or a single large framebuffer. Fix the calculation logic for CAB to account for large framebuffer. Current logic assumes that any FB that the plane points to are independent. When a single FB is used on the system, this does 2 times allocation. Add a check to prevent duplicate allocation by checking if the base addresses are the same, and then ensuring that the if we allocate using the pitch, whole of the other fbs will be accounted for in the first allocation. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Drop FPU flags from MakefileRodrigo Siqueira
At this point, we isolate the FPU code associated with DCN314 under the DML folder. This commit drops the FPU flags from the Makefile. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Move populate dml pipes from DCN314 to dmlRodrigo Siqueira
The function responsible for populating DML pipes has some FPU operations, and for this reason, it must be moved to the dml folder. This commit moves such function from resource to the fpu file under the dml folder. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Create FPU files for DCN314Rodrigo Siqueira
DCN314 has multiple references to FPU operations inside the resource files, and we need to move those codes to the DML folder. This commit creates the dcn314_fpu files and moves the bounding box operation to this file. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: Use pixels per container logic for DCN314 DCCG dividersDaniel Miess
[Why] DP DSC YCbCr422 not working because dcn314_calculate_dccg_k1_k2_values does not account for two pixels per container [How] Replace the contents of dcn314_calculate_dccg_k1_k2_values with the code from the function dcn32_calculate_dccg_k1_k2_values Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amdgpu/pm: remove EnableGfxOff message for SMU IP v13.0.4Tim Huang
The EnableGfxOff message is dropped from the new PMFW ppsmc interface. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amdgpu/pm: update smu driver interface header for SMU IP v13.0.4Tim Huang
Update the SmuMetrics_t defination and SMU driver interface version. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.1Tim Huang
Enable GFX CG gate/ungate control. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amdgpu: add GFX Clock Gating support for GC IP v11.0.1Tim Huang
Add below GFX Clock Gating supports: 1. GFX Coarse Grain Clock Gating(CGCG) 2. GFX Coarse grain light sleep/deep sleep(CGLS) 3. GFX Medium Grain Clock Gating(MGCG) 4. GFX Fine Grain Clock Gating(FGCG) 5. Repeater Fine Grain Clock Gating 6. Perfmon Clock Gating Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: change family id name for DCN314Yifan Zhang
GC version is 11.0.1 rather than 11.0.2 Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amdgpu: Remove redundant reference of header fileMa Jun
Remove redundant reference of header file dev_printk.h Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10KVM: VMX: Adjust number of LBR records for PERF_CAPABILITIES at refreshSean Christopherson
Now that the PMU is refreshed when MSR_IA32_PERF_CAPABILITIES is written by host userspace, zero out the number of LBR records for a vCPU during PMU refresh if PMU_CAP_LBR_FMT is not set in PERF_CAPABILITIES instead of handling the check at run-time. guest_cpuid_has() is expensive due to the linear search of guest CPUID entries, intel_pmu_lbr_is_enabled() is checked on every VM-Enter, _and_ simply enumerating the same "Model" as the host causes KVM to set the number of LBR records to a non-zero value. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220727233424.2968356-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: VMX: Use proper type-safe functions for vCPU => LBRs helpersSean Christopherson
Turn vcpu_to_lbr_desc() and vcpu_to_lbr_records() into functions in order to provide type safety, to document exactly what they return, and to allow consuming the helpers in vmx.h. Move the definitions as necessary (the macros "reference" to_vmx() before its definition). No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220727233424.2968356-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86: Refresh PMU after writes to MSR_IA32_PERF_CAPABILITIESSean Christopherson
Refresh the PMU if userspace modifies MSR_IA32_PERF_CAPABILITIES. KVM consumes the vCPU's PERF_CAPABILITIES when enumerating PEBS support, but relies on CPUID updates to refresh the PMU. I.e. KVM will do the wrong thing if userspace stuffs PERF_CAPABILITIES _after_ setting guest CPUID. Opportunistically fix a curly-brace indentation. Fixes: c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS") Cc: Like Xu <like.xu.linux@gmail.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220727233424.2968356-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: selftests: Test all possible "invalid" PERF_CAPABILITIES.LBR_FMT valsSean Christopherson
Test all possible input values to verify that KVM rejects all values except the exact host value. Due to the LBR format affecting the core functionality of LBRs, KVM can't emulate "other" formats, so even though there are a variety of legal values, KVM should reject anything but an exact host match. Suggested-by: Like Xu <like.xu.linux@gmail.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: selftests: Use getcpu() instead of sched_getcpu() in rseq_testGavin Shan
sched_getcpu() is glibc dependent and it can simply return the CPU ID from the registered rseq information, as Florian Weimer pointed. In this case, it's pointless to compare the return value from sched_getcpu() and that fetched from the registered rseq information. Fix the issue by replacing sched_getcpu() with getcpu(), as Florian suggested. The comments are modified accordingly by replacing "sched_getcpu()" with "getcpu()". Reported-by: Yihuang Yu <yihyu@redhat.com> Suggested-by: Florian Weimer <fweimer@redhat.com> Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Message-Id: <20220810104114.6838-3-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: selftests: Make rseq compatible with glibc-2.35Gavin Shan
The rseq information is registered by TLS, starting from glibc-2.35. In this case, the test always fails due to syscall(__NR_rseq). For example, on RHEL9.1 where upstream glibc-2.35 features are enabled on downstream glibc-2.34, the test fails like below. # ./rseq_test ==== Test Assertion Failure ==== rseq_test.c:60: !r pid=112043 tid=112043 errno=22 - Invalid argument 1 0x0000000000401973: main at rseq_test.c:226 2 0x0000ffff84b6c79b: ?? ??:0 3 0x0000ffff84b6c86b: ?? ??:0 4 0x0000000000401b6f: _start at ??:? rseq failed, errno = 22 (Invalid argument) # rpm -aq | grep glibc-2 glibc-2.34-39.el9.aarch64 Fix the issue by using "../rseq/rseq.c" to fetch the rseq information, registred by TLS if it exists. Otherwise, we're going to register our own rseq information as before. Reported-by: Yihuang Yu <yihyu@redhat.com> Suggested-by: Florian Weimer <fweimer@redhat.com> Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Message-Id: <20220810104114.6838-2-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: Actually create debugfs in kvm_create_vm()Oliver Upton
Doing debugfs creation after vm creation leaves things in a quasi-initialized state for a while. This is further complicated by the fact that we tear down debugfs from kvm_destroy_vm(). Align debugfs and stats init/destroy with the vm init/destroy pattern to avoid any headaches. Note the fix for a benign mistake in error handling for calls to kvm_arch_create_vm_debugfs() rolled in. Since all implementations of the function return 0 unconditionally it isn't actually a bug at the moment. Lastly, tear down debugfs/stats data in the kvm_create_vm_debugfs() error path. Previously it was safe to assume that kvm_destroy_vm() would take out the garbage, that is no longer the case. Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20220720092259.3491733-6-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: Pass the name of the VM fd to kvm_create_vm_debugfs()Oliver Upton
At the time the VM fd is used in kvm_create_vm_debugfs(), the fd has been allocated but not yet installed. It is only really useful as an identifier in strings for the VM (such as debugfs). Treat it exactly as such by passing the string name of the fd to kvm_create_vm_debugfs(), futureproofing against possible misuse of the VM fd. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20220720092259.3491733-5-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: Get an fd before creating the VMOliver Upton
Allocate a VM's fd at the very beginning of kvm_dev_ioctl_create_vm() so that KVM can use the fd value to generate strigns, e.g. for debugfs, when creating and initializing the VM. Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20220720092259.3491733-4-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: Shove vcpu stats_id init into kvm_vcpu_init()Oliver Upton
Initialize stats_id alongside other kvm_vcpu fields to make it more difficult to unintentionally access stats_id before it's set. No functional change intended. Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20220720092259.3491733-3-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: Shove vm stats_id init into kvm_create_vm()Oliver Upton
Initialize stats_id alongside other struct kvm fields to make it more difficult to unintentionally access stats_id before it's set. While at it, move the format string to the first line of the call and fix the indentation of the second line. No functional change intended. Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20220720092259.3491733-2-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86/mmu: Add sanity check that MMIO SPTE mask doesn't overlap genSean Christopherson
Add compile-time and init-time sanity checks to ensure that the MMIO SPTE mask doesn't overlap the MMIO SPTE generation or the MMU-present bit. The generation currently avoids using bit 63, but that's as much coincidence as it is strictly necessarly. That will change in the future, as TDX support will require setting bit 63 (SUPPRESS_VE) in the mask. Explicitly carve out the bits that are allowed in the mask so that any future shuffling of SPTE bits doesn't silently break MMIO caching (KVM has broken MMIO caching more than once due to overlapping the generation with other things). Suggested-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-Id: <20220805194133.86299-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86/mmu: rename trace function name for asynchronous page faultMingwei Zhang
Rename the tracepoint function from trace_kvm_async_pf_doublefault() to trace_kvm_async_pf_repeated_fault() to make it clear, since double fault has nothing to do with this trace function. Asynchronous Page Fault (APF) is an artifact generated by KVM when it cannot find a physical page to satisfy an EPT violation. KVM uses APF to tell the guest OS to do something else such as scheduling other guest processes to make forward progress. However, when another guest process also touches a previously APFed page, KVM halts the vCPU instead of generating a repeated APF to avoid wasting cycles. Double fault (#DF) clearly has a different meaning and a different consequence when triggered. #DF requires two nested contributory exceptions instead of two page faults faulting at the same address. A prevous bug on APF indicates that it may trigger a double fault in the guest [1] and clearly this trace function has nothing to do with it. So rename this function should be a valid choice. No functional change intended. [1] https://www.spinics.net/lists/kvm/msg214957.html Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220807052141.69186-1-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86/xen: Stop Xen timer before changing IRQColeman Dietsch
Stop Xen timer (if it's running) prior to changing the IRQ vector and potentially (re)starting the timer. Changing the IRQ vector while the timer is still running can result in KVM injecting a garbage event, e.g. vm_xen_inject_timer_irqs() could see a non-zero xen.timer_pending from a previous timer but inject the new xen.timer_virq. Fixes: 536395260582 ("KVM: x86/xen: handle PV timers oneshot mode") Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?id=8234a9dfd3aafbf092cc5a7cd9842e3ebc45fc42 Reported-by: syzbot+e54f930ed78eb0f85281@syzkaller.appspotmail.com Signed-off-by: Coleman Dietsch <dietschc@csp.edu> Reviewed-by: Sean Christopherson <seanjc@google.com> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20220808190607.323899-3-dietschc@csp.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86/xen: Initialize Xen timer only onceColeman Dietsch
Add a check for existing xen timers before initializing a new one. Currently kvm_xen_init_timer() is called on every KVM_XEN_VCPU_ATTR_TYPE_TIMER, which is causing the following ODEBUG crash when vcpu->arch.xen.timer is already set. ODEBUG: init active (active state 0) object type: hrtimer hint: xen_timer_callbac0 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:502 Call Trace: __debug_object_init debug_hrtimer_init debug_init hrtimer_init kvm_xen_init_timer kvm_xen_vcpu_set_attr kvm_arch_vcpu_ioctl kvm_vcpu_ioctl vfs_ioctl Fixes: 536395260582 ("KVM: x86/xen: handle PV timers oneshot mode") Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?id=8234a9dfd3aafbf092cc5a7cd9842e3ebc45fc42 Reported-by: syzbot+e54f930ed78eb0f85281@syzkaller.appspotmail.com Signed-off-by: Coleman Dietsch <dietschc@csp.edu> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220808190607.323899-2-dietschc@csp.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: SVM: Disable SEV-ES support if MMIO caching is disableSean Christopherson
Disable SEV-ES if MMIO caching is disabled as SEV-ES relies on MMIO SPTEs generating #NPF(RSVD), which are reflected by the CPU into the guest as a #VC. With SEV-ES, the untrusted host, a.k.a. KVM, doesn't have access to the guest instruction stream or register state and so can't directly emulate in response to a #NPF on an emulated MMIO GPA. Disabling MMIO caching means guest accesses to emulated MMIO ranges cause #NPF(!PRESENT), and those flavors of #NPF cause automatic VM-Exits, not #VC. Adjust KVM's MMIO masks to account for the C-bit location prior to doing SEV(-ES) setup, and document that dependency between adjusting the MMIO SPTE mask and SEV(-ES) setup. Fixes: b09763da4dd8 ("KVM: x86/mmu: Add module param to disable MMIO caching (for testing)") Reported-by: Michael Roth <michael.roth@amd.com> Tested-by: Michael Roth <michael.roth@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220803224957.1285926-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks changeSean Christopherson
Fully re-evaluate whether or not MMIO caching can be enabled when SPTE masks change; simply clearing enable_mmio_caching when a configuration isn't compatible with caching fails to handle the scenario where the masks are updated, e.g. by VMX for EPT or by SVM to account for the C-bit location, and toggle compatibility from false=>true. Snapshot the original module param so that re-evaluating MMIO caching preserves userspace's desire to allow caching. Use a snapshot approach so that enable_mmio_caching still reflects KVM's actual behavior. Fixes: 8b9e74bfbf8c ("KVM: x86/mmu: Use enable_mmio_caching to track if MMIO caching is enabled") Reported-by: Michael Roth <michael.roth@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Tested-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-Id: <20220803224957.1285926-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86: Tag kvm_mmu_x86_module_init() with __initSean Christopherson
Mark kvm_mmu_x86_module_init() with __init, the entire reason it exists is to initialize variables when kvm.ko is loaded, i.e. it must never be called after module initialization. Fixes: 1d0e84806047 ("KVM: x86/mmu: Resolve nx_huge_pages when kvm.ko is loaded") Cc: stable@vger.kernel.org Reviewed-by: Kai Huang <kai.huang@intel.com> Tested-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220803224957.1285926-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86: emulator: Fix illegal LEA handlingMichal Luczaj
The emulator mishandles LEA with register source operand. Even though such LEA is illegal, it can be encoded and fed to CPU. In which case real hardware throws #UD. The emulator, instead, returns address of x86_emulate_ctxt._regs. This info leak hurts host's kASLR. Tell the decoder that illegal LEA is not to be emulated. Signed-off-by: Michal Luczaj <mhal@rbox.co> Message-Id: <20220729134801.1120-1-mhal@rbox.co> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: X86: avoid uninitialized 'fault.async_page_fault' from fixed-up #PFYu Zhang
kvm_fixup_and_inject_pf_error() was introduced to fixup the error code( e.g., to add RSVD flag) and inject the #PF to the guest, when guest MAXPHYADDR is smaller than the host one. When it comes to nested, L0 is expected to intercept and fix up the #PF and then inject to L2 directly if - L2.MAXPHYADDR < L0.MAXPHYADDR and - L1 has no intention to intercept L2's #PF (e.g., L2 and L1 have the same MAXPHYADDR value && L1 is using EPT for L2), instead of constructing a #PF VM Exit to L1. Currently, with PFEC_MASK and PFEC_MATCH both set to 0 in vmcs02, the interception and injection may happen on all L2 #PFs. However, failing to initialize 'fault' in kvm_fixup_and_inject_pf_error() may cause the fault.async_page_fault being NOT zeroed, and later the #PF being treated as a nested async page fault, and then being injected to L1. Instead of zeroing 'fault' at the beginning of this function, we mannually set the value of 'fault.async_page_fault', because false is the value we really expect. Fixes: 897861479c064 ("KVM: x86: Add helper functions for illegal GPA checking and page fault injection") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216178 Reported-by: Yang Lixiao <lixiao.yang@intel.com> Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220718074756.53788-1-yu.c.zhang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86: Bug the VM if an accelerated x2APIC trap occurs on a "bad" regSean Christopherson
Bug the VM if retrieving the x2APIC MSR/register while processing an accelerated vAPIC trap VM-Exit fails. In theory it's impossible for the lookup to fail as hardware has already validated the register, but bugs happen, and not checking the result of kvm_lapic_msr_read() would result in consuming the uninitialized "val" if a KVM or hardware bug occurs. Fixes: 1bd9dfec9fd4 ("KVM: x86: Do not block APIC write for non ICR registers") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220804235028.1766253-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86: do not report preemption if the steal time cache is stalePaolo Bonzini
Commit 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status", 2021-11-11) open coded the previous call to kvm_map_gfn, but in doing so it dropped the comparison between the cached guest physical address and the one in the MSR. This cause an incorrect cache hit if the guest modifies the steal time address while the memslots remain the same. This can happen with kexec, in which case the preempted bit is written at the address used by the old kernel instead of the old one. Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Fixes: 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10KVM: x86: revalidate steal time cache if MSR value changesPaolo Bonzini
Commit 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status", 2021-11-11) open coded the previous call to kvm_map_gfn, but in doing so it dropped the comparison between the cached guest physical address and the one in the MSR. This cause an incorrect cache hit if the guest modifies the steal time address while the memslots remain the same. This can happen with kexec, in which case the steal time data is written at the address used by the old kernel instead of the old one. While at it, rename the variable from gfn to gpa since it is a plain physical address and not a right-shifted one. Reported-by: Dave Young <ruyang@redhat.com> Reported-by: Xiaoying Yan <yiyan@redhat.com> Analyzed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Fixes: 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10selftests: kvm: fix compilationPaolo Bonzini
Commit 49de12ba06ef ("selftests: drop KSFT_KHDR_INSTALL make target") dropped from tools/testing/selftests/lib.mk the code related to KSFT_KHDR_INSTALL, but in doing so it also dropped the definition of the ARCH variable. The ARCH variable is used in several subdirectories, but kvm/ is the only one of these that was using KSFT_KHDR_INSTALL. As a result, kvm selftests cannot be built anymore: In file included from include/x86_64/vmx.h:12, from x86_64/vmx_pmu_caps_test.c:18: include/x86_64/processor.h:15:10: fatal error: asm/msr-index.h: No such file or directory 15 | #include <asm/msr-index.h> | ^~~~~~~~~~~~~~~~~ In file included from ../../../../tools/include/asm/atomic.h:6, from ../../../../tools/include/linux/atomic.h:5, from rseq_test.c:15: ../../../../tools/include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/cmpxchg.h: No such file or directory 11 | #include <asm/cmpxchg.h> | ^~~~~~~~~~~~~~~ Fix it by including the definition that was present in lib.mk. Fixes: 49de12ba06ef ("selftests: drop KSFT_KHDR_INSTALL make target") Cc: Guillaume Tucker <guillaume.tucker@collabora.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-10drm/amdgpu: Avoid another list of reset devicesLijo Lazar
A list of devices to be reset is already created in amdgpu_device_gpu_recover function. Creating another list with the same nodes is incorrect and not supported in list_head. Instead, pass the device list as part of reset context. Fixes: 9e08564727fc (drm/amdgpu: Refactor mode2 reset logic for v13.0.2) Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: include missing headersMagali Lemes
Add missing headers to solve the following warnings from sparse: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:656:17: warning: symbol 'ddr4_wm_table_gs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:693:17: warning: symbol 'lpddr4_wm_table_gs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:730:17: warning: symbol 'lpddr4_wm_table_with_disabled_ppt' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:767:17: warning: symbol 'ddr4_wm_table_rn' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:804:17: warning: symbol 'ddr4_1R_wm_table_rn' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:841:17: warning: symbol 'lpddr4_wm_table_rn' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:217:17: warning: symbol 'ddr4_wm_table' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:254:17: warning: symbol 'lpddr5_wm_table' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:53:30: warning: symbol 'dcn3_1_ip' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:197:30: warning: symbol 'dcn3_15_ip' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:293:30: warning: symbol 'dcn3_16_ip' was not declared. Should it be static? Fixes: 1a3408259bfd ("drm/amd/display: move FPU code on dcn21 clk_mgr") Fixes: 5085e0361f5a ("drm/amd/display: move FPU code from dcn301 clk mgr to DML folder") Fixes: 26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder") Fixes: fa896297b31b ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder") Fixes: 3f8951cc123f ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder") Signed-off-by: Magali Lemes <magalilemes00@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amdgpu: change vram width algorithm for vram_info v3_0Likun Gao
Update the vram width algorithm for vram_info v3_0 to align with the changes of latest IFWI. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.19.x
2022-08-10drm/amdgpu: Pessimistic availability based on rounded up allocationsDaniel Phillips
Separately accumulate a statistic of rounded up allocations to use to report availability, with a view to increasing the likelihood a buffer object can be successfully allocated at exactly the size reported by the availability API. Signed-off-by: Daniel Phillips <daniel.phillips@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amdgpu: Remove rounding from vram allocation pathDaniel Phillips
Rounding up allocations in the allocation path caused test regressions, so now just round in the availability path. Signed-off-by: Daniel Phillips <daniel.phillips@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: remove header from source fileMagali Lemes
Since "rn_clk_mgr.h" needs ‘struct clk_mgr_internal’ which is declared in "clk_mgr_internal.h", include "clk_mgr_internal.h" in "rn_clk_mgr.h" instead of in its source file. Because of the change above, change the order of '#include "rn_clk_mgr.h"', so that the necessary structs are visible to dcn20_clk_mgr.h. Signed-off-by: Magali Lemes <magalilemes00@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: make variables staticMagali Lemes
As "dcn3_1_soc", "dcn3_15_soc", and "dcn3_16_soc" are not used outside of their corresponding "dcn3*_fpu.c", make them static and remove their extern declaration. Fixes: 26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder") Fixes: fa896297b31b ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder") Fixes: 3f8951cc123f ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder") Signed-off-by: Magali Lemes <magalilemes00@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: remove DML Makefile duplicate linesMagali Lemes
There are two identical CFLAGS entries for "display_mode_vba_20.o", so remove one of them. Also, as there's already an entry for "display_mode_lib.o" CFLAGS, regardless of CONFIG_DRM_AMD_DC_DCN being defined or not, remove the one entry between CONFIG_DRM_AMD_DC_DCN ifdef guards. Signed-off-by: Magali Lemes <magalilemes00@gmail.com> Reviewed-by: André Almeida <andrealmeid@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 18:37:36 +0000