summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-12arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocsLuca Weiss
The code in qcom_q6v5_init() requests the "wdog" IRQ as IRQF_TRIGGER_RISING. If dt defines the interrupt type as LEVEL_HIGH then the driver will have issues getting the IRQ again after probe deferral with an error like: irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000! Fix that by updating the devicetrees to use IRQ_TYPE_EDGE_RISING for these interrupts, as is already used in most dt's. Also the driver was already using the interrupts with that type. Fixes: 3658e411efcb ("arm64: dts: qcom: sc7280: Add ADSP node") Fixes: df62402e5ff9 ("arm64: dts: qcom: sc7280: Add CDSP node") Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Fixes: 8eb5287e8a42 ("arm64: dts: qcom: sm6350: Add CDSP nodes") Fixes: efc33c969f23 ("arm64: dts: qcom: sm6350: Add ADSP nodes") Fixes: fe6fd26aeddf ("arm64: dts: qcom: sm6375: Add ADSP&CDSP") Fixes: 23a8903785b9 ("arm64: dts: qcom: sm8250: Add remoteprocs") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20240219-remoteproc-irqs-v1-1-c5aeb02334bd@fairphone.com [bjorn: Added fixes references] Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-12Merge tag 'io_uring-6.9-20240412' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: - Fix for sigmask restoring while waiting for events (Alexey) - Typo fix in comment (Haiyue) - Fix for a msg_control retstore on SEND_ZC retries (Pavel) * tag 'io_uring-6.9-20240412' of git://git.kernel.dk/linux: io-uring: correct typo in comment for IOU_F_TWQ_LAZY_WAKE io_uring/net: restore msg_control on sendzc retry io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure
2024-04-12Merge tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "Two CephFS fixes marked for stable and a MAINTAINERS update" * tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-client: MAINTAINERS: remove myself as a Reviewer for Ceph ceph: switch to use cap_delay_lock for the unlink delay list ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE
2024-04-12Kconfig: add some hidden tabs on purposeLinus Torvalds
Commit d96c36004e31 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry") removed a hidden tab because it apparently showed breakage in some third-party kernel config parsing tool. It wasn't clear what tool it was, but let's make sure it gets fixed. Because if you can't parse tabs as whitespace, you should not be parsing the kernel Kconfig files. In fact, let's make such breakage more obvious than some esoteric ftrace record size option. If you can't parse tabs, you can't have page sizes. Yes, tab-vs-space confusion is sadly a traditional Unix thing, and 'make' is famous for being broken in this regard. But no, that does not mean that it's ok. I'd add more random tabs to our Kconfig files, but I don't want to make things uglier than necessary. But it *might* bbe necessary if it turns out we see more of this kind of silly tooling. Fixes: d96c36004e31 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry") Link: https://lore.kernel.org/lkml/CAHk-=wj-hLLN_t_m5OL4dXLaxvXKy_axuoJYXif7iczbfgAevQ@mail.gmail.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-04-12bpf: Fix a verifier verbose messageAnton Protopopov
Long ago a map file descriptor in a pseudo ldimm64 instruction could only be present as an immediate value insn[0].imm, and thus this value was used in a verbose verifier message printed when the file descriptor wasn't valid. Since addition of BPF_PSEUDO_MAP_IDX_VALUE/BPF_PSEUDO_MAP_IDX the insn[0].imm field can also contain an index pointing to the file descriptor in the attr.fd_array array. However, if the file descriptor is invalid, the verifier still prints the verbose message containing value of insn[0].imm. Patch the verifier message to always print the actual file descriptor value. Fixes: 387544bfa291 ("bpf: Introduce fd_idx") Signed-off-by: Anton Protopopov <aspsk@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240412141100.3562942-1-aspsk@isovalent.com
2024-04-12Merge tag 'trace-v6.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix the buffer_percent accounting as it is dependent on three variables: 1) pages_read - number of subbuffers read 2) pages_lost - number of subbuffers lost due to overwrite 3) pages_touched - number of pages that a writer entered These three counters only increment, and to know how many active pages there are on the buffer at any given time, the pages_read and pages_lost are subtracted from pages_touched. But the pages touched was incremented whenever any writer went to the next subbuffer even if it wasn't the only one, so it was incremented more than it should be causing the counter for how many subbuffers currently have content incorrect, which caused the buffer_percent that holds waiters until the ring buffer is filled to a given percentage to wake up early. - Fix warning of unused functions when PERF_EVENTS is not configured in - Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE - Fix to some kerneldoc function comments in eventfs code. * tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Only update pages_touched when a new page is touched tracing: hide unused ftrace_event_id_fops tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry eventfs: Fix kernel-doc comments to functions
2024-04-13init/main.c: Fix potential static_command_line memory overflowYuntao Wang
We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line. When strlen(command_line) > strlen(boot_command_line), static_command_line will overflow. This patch just recovers strlen(command_line) which was miss-consolidated with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()") Link: https://lore.kernel.org/all/20240412081733.35925-2-ytcoode@gmail.com/ Fixes: f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()") Cc: stable@vger.kernel.org Signed-off-by: Yuntao Wang <ytcoode@gmail.com> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-04-12HID: mcp-2221: cancel delayed_work only when CONFIG_IIO is enabledAbdelrahman Morsy
If the device is unplugged and CONFIG_IIO is not supported, this will result in a warning message at kernel/workqueue. Only cancel delayed work in mcp2221_remove(), when CONFIG_IIO is enabled. Signed-off-by: Abdelrahman Morsy <abdelrahmanhesham94@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-04-12Merge tag 'mips-fixes_6.9_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fix from Thomas Bogendoerfer: "Fix for syscall_get_nr() to make it work even if tracing is disabled" * tag 'mips-fixes_6.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: scall: Save thread_info.syscall unconditionally on entry
2024-04-12Merge tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Looks like everyone woke up after holidays, this weeks pull has a bunch of stuff all over, 2 weeks worth of amdgpu is a lot of it, then i915/xe have a few, a bunch of msm fixes, then some scattered driver fixes. I expect things will settle down for rc5. client: - Protect connector modes with mode_config mutex ast: - Fix soft lockup host1x: - Do not setup DMA for virtual addresses ivpu: - Fix deadlock in context_xa - PCI fixes - Fixes to error handling nouveau: - gsp: Fix OOB access - Fix casting panfrost: - Fix error path in MMU code qxl: - Revert "drm/qxl: simplify qxl_fence_wait" vmwgfx: - Enable DMA for SEV mappings i915: - Couple CDCLK programming fixes - HDCP related fix - 4 Bigjoiner related fixes - Fix for a circular locking around GuC on reset+wedged case xe: - Fix double display mutex initializations - Fix u32 -> u64 implicit conversions - Fix RING_CONTEXT_CONTROL not marked as masked msm: - DP refcount leak fix on disconnect - Add missing newlines to prints in msm_fb and msm_kms - fix dpu debugfs entry permissions - Fix the interface table for the catalog of X1E80100 - fix irq message printing - Bindings fix to add DP node as child of mdss for mdss node - Minor typo fix in DP driver API which handles port status change - fix CHRASHDUMP_READ() - fix HHB (highest bank bit) for a619 to fix UBWC corruption amdgpu: - GPU reset fixes - Fix some confusing logging - UMSCH fix - Aborted suspend fix - DCN 3.5 fixes - S4 fix - MES logging fixes - SMU 14 fixes - SDMA 4.4.2 fix - KASAN fix - SMU 13.0.10 fix - VCN partition fix - GFX11 fixes - DWB fixes - Plane handling fix - FAMS fix - DCN 3.1.6 fix - VSC SDP fixes - OLED panel fix - GFX 11.5 fix amdkfd: - GPU reset fixes - fix ioctl integer overflow" * tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel: (65 commits) amdkfd: use calloc instead of kzalloc to avoid integer overflow drm/xe: Label RING_CONTEXT_CONTROL as masked drm/xe/xe_migrate: Cast to output precision before multiplying operands drm/xe/hwmon: Cast result to output precision on left shift of operand drm/xe/display: Fix double mutex initialization drm/amdgpu: differentiate external rev id for gfx 11.5.0 drm/amd/display: Adjust dprefclk by down spread percentage. drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4 drm/amd/display: fix disable otg wa logic in DCN316 drm/amd/display: Do not recursively call manual trigger programming drm/amd/display: always reset ODM mode in context when adding first plane drm/amdgpu: fix incorrect number of active RBs for gfx11 drm/amd/display: Return max resolution supported by DWB amd/amdkfd: sync all devices to wait all processes being evicted drm/amdgpu: clear set_q_mode_offs when VM changed drm/amdgpu: Fix VCN allocation in CPX partition drm/amd/pm: fix the high voltage issue after unload drm/amd/display: Skip on writeback when it's not applicable drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2 ...
2024-04-12selftests: kselftest: Fix build failure with NOLIBCOleg Nesterov
As Mark explains ksft_min_kernel_version() can't be compiled with nolibc, it doesn't implement uname(). Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()") Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240412123536.GA32444@redhat.com Closes: https://lore.kernel.org/all/f0523b3a-ea08-4615-b0fb-5b504a2d39df@sirena.org.uk/
2024-04-12block: fix that blk_time_get_ns() doesn't update time after scheduleYu Kuai
While monitoring the throttle time of IO from iocost, it's found that such time is always zero after the io_schedule() from ioc_rqos_throttle, for example, with the following debug patch: + printk("%s-%d: %s enter %llu\n", current->comm, current->pid, __func__, blk_time_get_ns()); while (true) { set_current_state(TASK_UNINTERRUPTIBLE); if (wait.committed) break; io_schedule(); } + printk("%s-%d: %s exit %llu\n", current->comm, current->pid, __func__, blk_time_get_ns()); It can be observerd that blk_time_get_ns() always return the same time: [ 1068.096579] fio-1268: ioc_rqos_throttle enter 1067901962288 [ 1068.272587] fio-1268: ioc_rqos_throttle exit 1067901962288 [ 1068.274389] fio-1268: ioc_rqos_throttle enter 1067901962288 [ 1068.472690] fio-1268: ioc_rqos_throttle exit 1067901962288 [ 1068.474485] fio-1268: ioc_rqos_throttle enter 1067901962288 [ 1068.672656] fio-1268: ioc_rqos_throttle exit 1067901962288 [ 1068.674451] fio-1268: ioc_rqos_throttle enter 1067901962288 [ 1068.872655] fio-1268: ioc_rqos_throttle exit 1067901962288 And I think the root cause is that 'PF_BLOCK_TS' is always cleared by blk_flush_plug() before scheduel(), hence blk_plug_invalidate_ts() will never be called: blk_time_get_ns plug->cur_ktime = ktime_get_ns(); current->flags |= PF_BLOCK_TS; io_schedule: io_schedule_prepare blk_flush_plug __blk_flush_plug /* the flag is cleared, while time is not */ current->flags &= ~PF_BLOCK_TS; schedule sched_update_worker /* the flag is not set, hence plug->cur_ktime is not cleared */ if (tsk->flags & PF_BLOCK_TS) blk_plug_invalidate_ts() blk_time_get_ns /* got the time stashed before schedule */ return plug->cur_ktime; Fix the problem by clearing cached time in __blk_flush_plug(). Fixes: 06b23f92af87 ("block: update cached timestamp post schedule/preemption") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240411032349.3051233-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-12s390/cio: log fake IRB eventsPeter Oberparleiter
Add traces when queueing and delivering fake IRBs. These are significant events that might have an impact on device driver processing and are therefore relevant for problem analysis. Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-12s390/cio: fix race condition during online processingPeter Oberparleiter
A race condition exists in ccw_device_set_online() that can cause the online process to fail, leaving the affected device in an inconsistent state. As a result, subsequent attempts to set that device online fail with return code ENODEV. The problem occurs when a path verification request arrives after a wait for final device state completed, but before the result state is evaluated. Fix this by ensuring that the CCW-device lock is held between determining final state and checking result state. Note that since: commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") path verification requests are much more likely to occur during boot, resulting in an increased chance of this race condition occurring. Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-12s390/qdio: handle deferred cc1Peter Oberparleiter
A deferred condition code 1 response indicates that I/O was not started and should be retried. The current QDIO implementation handles a cc1 response as I/O error, resulting in a failed QDIO setup. This can happen for example when a path verification request arrives at the same time as QDIO setup I/O is started. Fix this by retrying the QDIO setup I/O when a cc1 response is received. Note that since commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") commit 5ef1dc40ffa6 ("s390/cio: fix invalid -EBUSY on ccw_device_start") deferred cc1 responses are much more likely to occur. See the commit message of the latter for more background information. Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-12KVM: arm64: Exclude FP ownership from kvm_vcpu_archMarc Zyngier
In retrospect, it is fairly obvious that the FP state ownership is only meaningful for a given CPU, and that locating this information in the vcpu was just a mistake. Move the ownership tracking into the host data structure, and rename it from fp_state to fp_owner, which is a better description (name suggested by Mark Brown). Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-04-12KVM: arm64: Exclude host_fpsimd_state pointer from kvm_vcpu_archMarc Zyngier
As the name of the field indicates, host_fpsimd_state is strictly a host piece of data, and we reset this pointer on each PID change. So let's move it where it belongs, and set it at load-time. Although this is slightly more often, it is a well defined life-cycle which matches other pieces of data. Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-04-12KVM: arm64: Exclude mdcr_el2_host from kvm_vcpu_archMarc Zyngier
As for the rest of the host debug state, the host copy of mdcr_el2 has little to do in the vcpu, and is better placed in the host_data structure. Reviewed-by : Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-04-12KVM: arm64: Exclude host_debug_data from vcpu_archMarc Zyngier
Keeping host_debug_state on a per-vcpu basis is completely pointless. The lifetime of this data is only that of the inner run-loop, which means it is never accessed outside of the core EL2 code. Move the structure into kvm_host_data, and save over 500 bytes per vcpu. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-04-12KVM: arm64: Add accessor for per-CPU stateMarc Zyngier
In order to facilitate the introduction of new per-CPU state, add a new host_data_ptr() helped that hides some of the per-CPU verbosity, and make it easier to move that state around in the future. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-04-12selftests: timers: Fix abs() warning in posix_timers testJohn Stultz
Building with clang results in the following warning: posix_timers.c:69:6: warning: absolute value function 'abs' given an argument of type 'long long' but has parameter of type 'int' which may cause truncation of value [-Wabsolute-value] if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) { ^ So switch to using llabs() instead. Fixes: 0bc4b0cf1570 ("selftests: add basic posix timers selftests") Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410232637.4135564-3-jstultz@google.com
2024-04-12selftests: kselftest: Mark functions that unconditionally call exit() as ↵Nathan Chancellor
__noreturn After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()"), clang warns: tools/testing/selftests/timers/../kselftest.h:398:6: warning: variable 'major' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized] 398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2) | ^~~~~~~~~~~~ tools/testing/selftests/timers/../kselftest.h:401:9: note: uninitialized use occurs here 401 | return major > min_major || (major == min_major && minor >= min_minor); | ^~~~~ tools/testing/selftests/timers/../kselftest.h:398:6: note: remove the '||' if its condition is always false 398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2) | ^~~~~~~~~~~~~~~ tools/testing/selftests/timers/../kselftest.h:395:20: note: initialize the variable 'major' to silence this warning 395 | unsigned int major, minor; | ^ | = 0 This is a false positive because if uname() fails, ksft_exit_fail_msg() will be called, which unconditionally calls exit(), a noreturn function. However, clang does not know that ksft_exit_fail_msg() will call exit() at the point in the pipeline that the warning is emitted because inlining has not occurred, so it assumes control flow will resume normally after ksft_exit_fail_msg() is called. Make it clear to clang that all of the functions that call exit() unconditionally in kselftest.h are noreturn transitively by marking them explicitly with '__attribute__((__noreturn__))', which clears up the warning above and any future warnings that may appear for the same reason. Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()") Reported-by: John Stultz <jstultz@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240411-mark-kselftest-exit-funcs-noreturn-v1-1-b027c948f586@kernel.org Closes: https://lore.kernel.org/all/20240410232637.4135564-2-jstultz@google.com/
2024-04-12selftests: timers: Fix posix_timers ksft_print_msg() warningJohn Stultz
After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()") the following warning occurs when building with an older gcc: posix_timers.c:250:2: warning: format not a string literal and no format arguments [-Wformat-security] 250 | ksft_print_msg(errmsg); | ^~~~~~~~~~~~~~ Fix this up by changing it to ksft_print_msg("%s", errmsg) Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()") Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Justin Stitt <justinstitt@google.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410232637.4135564-1-jstultz@google.com
2024-04-12Merge tag 'nf-24-04-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf netfilter pull request 24-04-11 Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patches #1 and #2 add missing rcu read side lock when iterating over expression and object type list which could race with module removal. Patch #3 prevents promisc packet from visiting the bridge/input hook to amend a recent fix to address conntrack confirmation race in br_netfilter and nf_conntrack_bridge. Patch #4 adds and uses iterate decorator type to fetch the current pipapo set backend datastructure view when netlink dumps the set elements. Patch #5 fixes removal of duplicate elements in the pipapo set backend. Patch #6 flowtable validates pppoe header before accessing it. Patch #7 fixes flowtable datapath for pppoe packets, otherwise lookup fails and pppoe packets follow classic path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-12phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregisteredHans de Goede
The power_supply frame-work is not really designed for there to be long living in kernel references to power_supply devices. Specifically unregistering a power_supply while some other code has a reference to it triggers a WARN in power_supply_unregister(): WARN_ON(atomic_dec_return(&psy->use_cnt)); Folllowed by the power_supply still getting removed and the backing data freed anyway, leaving the tusb1210 charger-detect code with a dangling reference, resulting in a crash the next time tusb1210_get_online() is called. Fix this by only holding the reference in tusb1210_get_online() freeing it at the end of the function. Note this still leaves a theoretical race window, but it avoids the issue when manually rmmod-ing the charger chip driver during development. Fixes: 48969a5623ed ("phy: ti: tusb1210: Add charger detection") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240406140821.18624-1-hdegoede@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-12phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6Johan Hovold
Commit 5abed58a8bde ("phy: qcom: qmp-combo: Fix VCO div offset on v3") fixed a regression introduced in 6.5 by making sure that the correct offset is used for the DP_PHY_VCO_DIV register on v3 hardware. Unfortunately, that fix instead broke DisplayPort on v5_5nm and v6 hardware as it failed to add the corresponding offsets also to those register tables. Fixes: 815891eee668 ("phy: qcom-qmp-combo: Introduce orientation variable") Fixes: 5abed58a8bde ("phy: qcom: qmp-combo: Fix VCO div offset on v3") Cc: stable@vger.kernel.org # 6.5: 5abed58a8bde Cc: Stephen Boyd <swboyd@chromium.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20240408093023.506-1-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-12iommu/amd: Change log message severityVasant Hegde
Use consistent log severity (pr_warn) to log all messages in SNP enable path. Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20240410101643.32309-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-04-12iommu/vt-d: Fix WARN_ON in iommu probe pathLu Baolu
Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices") adds all devices probed by the iommu driver in a rbtree indexed by the source ID of each device. It assumes that each device has a unique source ID. This assumption is incorrect and the VT-d spec doesn't state this requirement either. The reason for using a rbtree to track devices is to look up the device with PCI bus and devfunc in the paths of handling ATS invalidation time out error and the PRI I/O page faults. Both are PCI ATS feature related. Only track the devices that have PCI ATS capabilities in the rbtree to avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some platforms below kernel splat will be displayed and the iommu probe results in failure. WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90 Call Trace: <TASK> ? __warn+0x7e/0x180 ? intel_iommu_probe_device+0x319/0xd90 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? intel_iommu_probe_device+0x319/0xd90 ? debug_mutex_init+0x37/0x50 __iommu_probe_device+0xf2/0x4f0 iommu_probe_device+0x22/0x70 iommu_bus_notifier+0x1e/0x40 notifier_call_chain+0x46/0x150 blocking_notifier_call_chain+0x42/0x60 bus_notify+0x2f/0x50 device_add+0x5ed/0x7e0 platform_device_add+0xf5/0x240 mfd_add_devices+0x3f9/0x500 ? preempt_count_add+0x4c/0xa0 ? up_write+0xa2/0x1b0 ? __debugfs_create_file+0xe3/0x150 intel_lpss_probe+0x49f/0x5b0 ? pci_conf1_write+0xa3/0xf0 intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci] pci_device_probe+0x95/0x120 really_probe+0xd9/0x370 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x73/0x150 driver_probe_device+0x19/0xa0 __driver_attach+0xb6/0x180 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x77/0xd0 bus_add_driver+0x114/0x210 driver_register+0x5b/0x110 ? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci] do_one_initcall+0x57/0x2b0 ? kmalloc_trace+0x21e/0x280 ? do_init_module+0x1e/0x210 do_init_module+0x5f/0x210 load_module+0x1d37/0x1fc0 ? init_module_from_file+0x86/0xd0 init_module_from_file+0x86/0xd0 idempotent_init_module+0x17c/0x230 __x64_sys_finit_module+0x56/0xb0 do_syscall_64+0x6e/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79 Fixes: 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10689 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20240407011429.136282-1-baolu.lu@linux.intel.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-04-12iommu/vt-d: Allocate local memory for page request queueJacob Pan
The page request queue is per IOMMU, its allocation should be made NUMA-aware for performance reasons. Fixes: a222a7f0bb6c ("iommu/vt-d: Implement page request handling") Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20240403214007.985600-1-jacob.jun.pan@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-04-12iommu/vt-d: Fix wrong use of pasid configXuchun Shang
The commit "iommu/vt-d: Add IOMMU perfmon support" introduce IOMMU PMU feature, but use the wrong config when set pasid filter. Fixes: 7232ab8b89e9 ("iommu/vt-d: Add IOMMU perfmon support") Signed-off-by: Xuchun Shang <xuchun.shang@linux.alibaba.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20240401060753.3321318-1-xuchun.shang@linux.alibaba.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-04-12x86/cpu/amd: Move TOPOEXT enablement into the topology parserThomas Gleixner
The topology rework missed that early_init_amd() tries to re-enable the Topology Extensions when the BIOS disabled them. The new parser is invoked before early_init_amd() so the re-enable attempt happens too late. Move it into the AMD specific topology parser code where it belongs. Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/878r1j260l.ffs@tglx
2024-04-12x86/cpu/amd: Make the NODEID_MSR union actually workThomas Gleixner
A system with NODEID_MSR was reported to crash during early boot without any output. The reason is that the union which is used for accessing the bitfields in the MSR is written wrongly and the resulting executable code accesses the wrong part of the MSR data. As a consequence a later division by that value results in 0 and that result is used for another division as divisor, which obviously does not work well. The magic world of C, unions and bitfields: union { u64 bita : 3, bitb : 3; u64 all; } x; x.all = foo(); a = x.bita; b = x.bitb; results in the effective executable code of: a = b = x.bita; because bita and bitb are treated as union members and therefore both end up at bit offset 0. Wrapping the bitfield into an anonymous struct: union { struct { u64 bita : 3, bitb : 3; }; u64 all; } x; works like expected. Rework the NODEID_MSR union in exactly that way to cure the problem. Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser") Reported-by: "kernelci.org bot" <bot@kernelci.org> Reported-by: Laura Nao <laura.nao@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Laura Nao <laura.nao@collabora.com> Link: https://lore.kernel.org/r/20240410194311.596282919@linutronix.de Closes: https://lore.kernel.org/all/20240322175210.124416-1-laura.nao@collabora.com/
2024-04-12x86/cpu/amd: Make the CPUID 0x80000008 parser correctThomas Gleixner
CPUID 0x80000008 ECX.cpu_nthreads describes the number of threads in the package. The parser uses this value to initialize the SMT domain level. That's wrong because cpu_nthreads does not describe the number of threads per physical core. So this needs to set the CORE domain level and let the later parsers set the SMT shift if available. Preset the SMT domain level with the assumption of one thread per core, which is correct ifrt here are no other CPUID leafs to parse, and propagate cpu_nthreads and the core level APIC bitwidth into the CORE domain. Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser") Reported-by: "kernelci.org bot" <bot@kernelci.org> Reported-by: Laura Nao <laura.nao@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Laura Nao <laura.nao@collabora.com> Link: https://lore.kernel.org/r/20240410194311.535206450@linutronix.de
2024-04-12x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHIJosh Poimboeuf
For consistency with the other CONFIG_MITIGATION_* options, replace the CONFIG_SPECTRE_BHI_{ON,OFF} options with a single CONFIG_MITIGATION_SPECTRE_BHI option. [ mingo: Fix ] Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/r/3833812ea63e7fdbe36bf8b932e63f70d18e2a2a.1712813475.git.jpoimboe@kernel.org
2024-04-12x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=autoJosh Poimboeuf
Unlike most other mitigations' "auto" options, spectre_bhi=auto only mitigates newer systems, which is confusing and not particularly useful. Remove it. Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/412e9dc87971b622bbbaf64740ebc1f140bff343.1712813475.git.jpoimboe@kernel.org
2024-04-12iommu: mtk: fix module autoloadingKrzysztof Kozlowski
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240410164109.233308-1-krzk@kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-04-12iommu/amd: Do not enable SNP when V2 page table is enabledVasant Hegde
DTE[Mode]=0 is not supported when SNP is enabled in the host. That means to support SNP, IOMMU must be configured with V1 page table (See IOMMU spec [1] for the details). If user passes kernel command line to configure IOMMU domains with v2 page table (amd_iommu=pgtbl_v2) then disable SNP as the user asked by not forcing the page table to v1. [1] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf Cc: Ashish Kalra <ashish.kalra@amd.com> Cc: Michael Roth <michael.roth@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20240410085702.31869-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-04-12iommu/amd: Fix possible irq lock inversion dependency issueVasant Hegde
LOCKDEP detector reported below warning: ---------------------------------------- [ 23.796949] ======================================================== [ 23.796950] WARNING: possible irq lock inversion dependency detected [ 23.796952] 6.8.0fix+ #811 Not tainted [ 23.796954] -------------------------------------------------------- [ 23.796954] kworker/0:1/8 just changed the state of lock: [ 23.796956] ff365325e084a9b8 (&domain->lock){..-.}-{3:3}, at: amd_iommu_flush_iotlb_all+0x1f/0x50 [ 23.796969] but this lock took another, SOFTIRQ-unsafe lock in the past: [ 23.796970] (pd_bitmap_lock){+.+.}-{3:3} [ 23.796972] and interrupts could create inverse lock ordering between them. [ 23.796973] other info that might help us debug this: [ 23.796974] Chain exists of: &domain->lock --> &dev_data->lock --> pd_bitmap_lock [ 23.796980] Possible interrupt unsafe locking scenario: [ 23.796981] CPU0 CPU1 [ 23.796982] ---- ---- [ 23.796983] lock(pd_bitmap_lock); [ 23.796985] local_irq_disable(); [ 23.796985] lock(&domain->lock); [ 23.796988] lock(&dev_data->lock); [ 23.796990] <Interrupt> [ 23.796991] lock(&domain->lock); Fix this issue by disabling interrupt when acquiring pd_bitmap_lock. Note that this is temporary fix. We have a plan to replace custom bitmap allocator with IDA allocator. Fixes: 87a6f1f22c97 ("iommu/amd: Introduce per-device domain ID to fix potential TLB aliasing issue") Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20240404102717.6705-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-04-12phy: phy-rockchip-samsung-hdptx: Select CONFIG_RATIONALCristian Ciocaltea
Ensure CONFIG_RATIONAL is selected in order to fix the following link error with some kernel configurations: drivers/phy/rockchip/phy-rockchip-samsung-hdptx.o: in function `rk_hdptx_ropll_tmds_cmn_config': phy-rockchip-samsung-hdptx.c:(.text+0x950): undefined reference to `rational_best_approximation' Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404090540.2l1TEkDF-lkp@intel.com/ Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240408222926.32708-1-cristian.ciocaltea@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-12KVM: SEV: use u64_to_user_ptr throughoutPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-12KVM: VMX: Modify NMI and INTR handlers to take intr_info as function argumentSean Christopherson
TDX uses different ABI to get information about VM exit. Pass intr_info to the NMI and INTR handlers instead of pulling it from vcpu_vmx in preparation for sharing the bulk of the handlers with TDX. When the guest TD exits to VMM, RAX holds status and exit reason, RCX holds exit qualification etc rather than the VMCS fields because VMM doesn't have access to the VMCS. The eventual code will be VMX: - get exit reason, intr_info, exit_qualification, and etc from VMCS - call NMI/INTR handlers (common code) TDX: - get exit reason, intr_info, exit_qualification, and etc from guest registers - call NMI/INTR handlers (common code) Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <0396a9ae70d293c9d0b060349dae385a8a4fbcec.1705965635.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-12KVM: VMX: Move out vmx_x86_ops to 'main.c' to dispatch VMX and TDXPaolo Bonzini
KVM accesses Virtual Machine Control Structure (VMCS) with VMX instructions to operate on VM. TDX doesn't allow VMM to operate VMCS directly. Instead, TDX has its own data structures, and TDX SEAMCALL APIs for VMM to indirectly operate those data structures. This means we must have a TDX version of kvm_x86_ops. The existing global struct kvm_x86_ops already defines an interface which can be adapted to TDX, but kvm_x86_ops is a system-wide, not per-VM structure. To allow VMX to coexist with TDs, the kvm_x86_ops callbacks will have wrappers "if (tdx) tdx_op() else vmx_op()" to pick VMX or TDX at run time. To split the runtime switch, the VMX implementation, and the TDX implementation, add main.c, and move out the vmx_x86_ops hooks in preparation for adding TDX. Use 'vt' for the naming scheme as a nod to VT-x and as a concatenation of VmxTdx. The eventually converted code will look like this: vmx.c: vmx_op() { ... } VMX initialization tdx.c: tdx_op() { ... } TDX initialization x86_ops.h: vmx_op(); tdx_op(); main.c: static vt_op() { if (tdx) tdx_op() else vmx_op() } static struct kvm_x86_ops vt_x86_ops = { .op = vt_op, initialization functions call both VMX and TDX initialization Opportunistically, fix the name inconsistency from vmx_create_vcpu() and vmx_free_vcpu() to vmx_vcpu_create() and vmx_vcpu_free(). Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Yuan Yao <yuan.yao@intel.com> Message-Id: <e603c317587f933a9d1bee8728c84e4935849c16.1705965634.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-12KVM: x86: Split core of hypercall emulation to helper functionSean Christopherson
By necessity, TDX will use a different register ABI for hypercalls. Break out the core functionality so that it may be reused for TDX. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <5134caa55ac3dec33fb2addb5545b52b3b52db02.1705965635.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-12Merge branch 'kvm-sev-init2' into HEADPaolo Bonzini
The idea that no parameter would ever be necessary when enabling SEV or SEV-ES for a VM was decidedly optimistic. The first source of variability that was encountered is the desired set of VMSA features, as that affects the measurement of the VM's initial state and cannot be changed arbitrarily by the hypervisor. This series adds all the APIs that are needed to customize the features, with room for future enhancements: - a new /dev/kvm device attribute to retrieve the set of supported features (right now, only debug swap) - a new sub-operation for KVM_MEM_ENCRYPT_OP that can take a struct, replacing the existing KVM_SEV_INIT and KVM_SEV_ES_INIT It then puts the new op to work by including the VMSA features as a field of the The existing KVM_SEV_INIT and KVM_SEV_ES_INIT use the full set of supported VMSA features for backwards compatibility; but I am considering also making them use zero as the feature mask, and will gladly adjust the patches if so requested. In order to avoid creating *two* new KVM_MEM_ENCRYPT_OPs, I decided that I could as well make SEV and SEV-ES use VM types. This allows SEV-SNP to reuse the KVM_SEV_INIT2 ioctl. And while at it, KVM_SEV_INIT2 also includes two bugfixes. First of all, SEV-ES VM, when created with the new VM type instead of KVM_SEV_ES_INIT, reject KVM_GET_REGS/KVM_SET_REGS and friends on the vCPU file descriptor once the VMSA has been encrypted... which is how the API should have always behaved. Second, they also synchronize the FPU and AVX state. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-12Merge branch 'mm-delete-change-gpte' into HEADPaolo Bonzini
The .change_pte() MMU notifier callback was intended as an optimization and for this reason it was initially called without a surrounding mmu_notifier_invalidate_range_{start,end}() pair. It was only ever implemented by KVM (which was also the original user of MMU notifiers) and the rules on when to call set_pte_at_notify() rather than set_pte_at() have always been pretty obscure. It may seem a miracle that it has never caused any hard to trigger bugs, but there's a good reason for that: KVM's implementation has been nonfunctional for a good part of its existence. Already in 2012, commit 6bdb913f0a70 ("mm: wrap calls to set_pte_at_notify with invalidate_range_start and invalidate_range_end", 2012-10-09) changed the .change_pte() callback to occur within an invalidate_range_start/end() pair; and because KVM unmaps the sPTEs during .invalidate_range_start(), .change_pte() has no hope of finding a sPTE to change. Therefore, all the code for .change_pte() can be removed from both KVM and mm/, and set_pte_at_notify() can be replaced with just set_pte_at(). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-12mm: replace set_pte_at_notify() with just set_pte_at()Paolo Bonzini
With the demise of the .change_pte() MMU notifier callback, there is no notification happening in set_pte_at_notify(). It is a synonym of set_pte_at() and can be replaced with it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240405115815.3226315-5-pbonzini@redhat.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-12selftests/powerpc/papr-vpd: Fix missing variable initializationNathan Lynch
The "close handle without consuming VPD" testcase has inconsistent results because it fails to initialize the location code object it passes to ioctl() to create a VPD handle. Initialize the location code to the empty string as intended. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Fixes: 9118c5d32bdd ("powerpc/selftests: Add test for papr-vpd") Reported-by: Geetika Moolchandani <geetika@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240404-papr-vpd-test-uninit-lc-v2-1-37bff46c65a5@linux.ibm.com
2024-04-11bcachefs: Don't use bch2_btree_node_lock_write_nofail() in btree split pathKent Overstreet
It turns out - btree splits happen with the rest of the transaction still locked, to avoid unnecessary restarts, which means using nofail doesn't work here - we can deadlock. Fortunately, we now have the ability to return errors here. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-12amdkfd: use calloc instead of kzalloc to avoid integer overflowDave Airlie
This uses calloc instead of doing the multiplication which might overflow. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-04-12Merge tag 'drm-msm-next-2024-04-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.9 Display: - Fixes for PM refcount leak when DP goes to disconnected state and also when link training fails. This is also one of the issues found with the pm runtime series - Add missing newlines to prints in msm_fb and msm_kms - Change permissions of some dpu debugfs entries which write to const data from catalog to read-only to avoid protection faults - Fix the interface table for the catalog of X1E80100. This is an important fix to bringup DP for X1E80100. - Logging fix to print the callback symbol in the invalid IRQ message case rather than printing when its known to be NULL. - Bindings fix to add DP node as child of mdss for mdss node - Minor typo fix in DP driver API which handles port status change GPU: - fix CHRASHDUMP_READ() - fix HHB (highest bank bit) for a619 to fix UBWC corruption Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvFwRUcHGWva7oDeydq1PTiZMduuykCD2MWaFrT4iMGZA@mail.gmail.com
generated by cgit (git 2.34.1) at 2025-09-13 23:20:01 +0000