| Age | Commit message (Collapse) | Author |
|---|
|
Added missing tab, line breaks.
Fixes: e3088ebc1b97 ("docs: ABI: added missing num_requests param to UAC2")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220108105608.10726-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Both capture and playback alsa devices use subdevice 0. Yet capture-side
ctls are defined for subdevice 1. The patch sets subdevice 0 for them.
Fixes: 02de698ca812 ("usb: gadget: u_audio: add bi-directional volume and mute support")
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220105104643.90125-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If bInterval is 1, then p_interval is 8000 and p_interval_mil is 8E9,
which is too big for a 32-bit value. While the storage is indeed
64-bit, this value is used as the divisor in do_div() which will
truncate it into a uint32_t leading to incorrect calculated values.
Switch back to keeping the base value in struct snd_uac_chip which fits
easily into an int, meaning that the division can be done in two steps
with the divisor fitting safely into a uint32_t on both steps.
Fixes: 6fec018a7e70 ("usb: gadget: u_audio.c: Adding Playback Pitch ctl for sync playback")
Tested-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20220104183243.718258-1-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DWC2 may be paired with a full-speed PHY which is not capable of
high-speed operation. Report this correctly to the gadget core by
setting max_speed from the core parameters.
Prior to commit 5324bad66f09f ("usb: dwc2: gadget: implement
udc_set_speed()") this didn't cause the hardware to be configured
incorrectly, although the speed may have been reported incorrectly. But
after that commit params.speed is updated based on a value passed in by
the gadget core which may set it to a faster speed than is supported by
the hardware. Initialising the max_speed parameter ensures the speed
passed to dwc2_gadget_set_speed() will be one supported by the hardware.
Fixes: 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20220106115731.1473909-1-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should not be clearing the HCD_FLAG_HW_ACCESSIBLE bit if the hardware
does not support clock gating.
Fixes: 50fb0c128b6e ("usb: dwc2: Add clock gating entering flow by system suspend")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220104135922.734776-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the acpi_create_platform_device() function may return error
pointers, dwc3_qcom_create_urs_usb_platdev() function may return error
pointers too. Using IS_ERR_OR_NULL() to check the return value to fix this.
Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20211222111823.22887-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
<linux/device.h>
The <linux/usb/ch9.h> header is used over 1,400 times in a typical distro
build, but few of its users actually need the full <linux/device.h> header.
--------------------------------------------------------------------
| Combined, preprocessed C code size of header, without line markers,
| with comments stripped:
-------------------------
before: | #include <linux/usb/ch9.h> | LOC: 7,078 | headers: 172
after: | #include <linux/usb/ch9.h> | LOC: 812 | headers: 38
Remove it and add it to the places that need it.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drivers/usb/common/debug.c was only including one usb .h file, which
would then accidentally drag in other .h files that were really needed.
Fix up the implict dependancy by correctly adding kernel.h to the file.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Avoid namespace collision with dev_ioctl() and dev_open(), also provided by generic headers.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Bugzilla #213839 reports a 7-port hub that doesn't work properly when
devices are plugged into some of the ports; the kernel goes into an
unending disconnect/reinitialize loop as shown in the bug report.
This "7-port hub" comprises two four-port hubs with one plugged into
the other; the failures occur when a device is plugged into one of the
downstream hub's ports. (These hubs have other problems too. For
example, they bill themselves as USB-2.0 compliant but they only run
at full speed.)
It turns out that the failures are caused by bugs in both the kernel
and the hub. The hub's bug is that it reports a different
bmAttributes value in its configuration descriptor following a remote
wakeup (0xe0 before, 0xc0 after -- the wakeup-support bit has
changed).
The kernel's bug is inside the hub driver's resume handler. When
hub_activate() sees that one of the hub's downstream ports got a
wakeup request from a child device, it notes this fact by setting the
corresponding bit in the hub->change_bits variable. But this variable
is meant for connection changes, not wakeup events; setting it causes
the driver to believe the downstream port has been disconnected and
then connected again (in addition to having received a wakeup
request).
Because of this, the hub driver then tries to check whether the device
currently plugged into the downstream port is the same as the device
that had been attached there before. Normally this check succeeds and
wakeup handling continues with no harm done (which is why the bug
remained undetected until now). But with these dodgy hubs, the check
fails because the config descriptor has changed. This causes the hub
driver to reinitialize the child device, leading to the
disconnect/reinitialize loop described in the bug report.
The proper way to note reception of a downstream wakeup request is
to set a bit in the hub->event_bits variable instead of
hub->change_bits. That way the hub driver will realize that something
has happened to the port but will not think the port and child device
have been disconnected. This patch makes that change.
Cc: <stable@vger.kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YdCw7nSfWYPKWQoD@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the USB core code for getting root-hub status reports was
originally written, it was assumed that the hub driver would be its
only caller. But this isn't true now; user programs can use usbfs to
communicate with root hubs and get status reports. When they do this,
they may use a transfer_buffer that is smaller than the data returned
by the HCD, which will lead to a buffer overflow error when
usb_hcd_poll_rh_status() tries to store the status data. This was
discovered by syzbot:
BUG: KASAN: slab-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline]
BUG: KASAN: slab-out-of-bounds in usb_hcd_poll_rh_status+0x5f4/0x780 drivers/usb/core/hcd.c:776
Write of size 2 at addr ffff88801da403c0 by task syz-executor133/4062
This patch fixes the bug by reducing the amount of status data if it
won't fit in the transfer_buffer. If some data gets discarded then
the URB's completion status is set to -EOVERFLOW rather than 0, to let
the user know what happened.
Reported-and-tested-by: syzbot+3ae6a2b06f131ab9849f@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Yc+3UIQJ2STbxNua@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dwc3_qcom_acpi_register_core
Add the missing platform_device_put() before return from
dwc3_qcom_acpi_register_core in the error handling case.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20211231113641.31474-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dev->config and dev->hs_config and dev->dev need to be cleaned if
dev_config fails to avoid UAF.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20211231172138.7993-3-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dev->buf does not need to be released if it already exists before
executing dev_config.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20211231172138.7993-2-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.17 merge window
This includes following Thunderbolt/USB4 changes for the v5.17 merge
window:
* Enable low-power link state (CL0s) for USB4 and Intel Titan Ridge
devices
* Add support for TMU (Time Management Unit) uni-directional mode
* Power management improvements (suspend-to-disk, runtime PM)
* USB4 compatibility fixes
* Minor fixes and cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Add module parameter for CLx disabling
thunderbolt: Enable CL0s for Intel Titan Ridge
thunderbolt: Rename Intel TB_VSE_CAP_IECS capability
thunderbolt: Implement TMU time disruption for Intel Titan Ridge
thunderbolt: Move usb4_switch_wait_for_bit() to switch.c
thunderbolt: Add CL0s support for USB4 routers
thunderbolt: Add TMU uni-directional mode
thunderbolt: Check return value of kmemdup() in icm_handle_event()
thunderbolt: Do not dereference fwnode in struct device
thunderbolt: Add debug logging of DisplayPort resource allocation
thunderbolt: Do not program path HopIDs for USB4 routers
thunderbolt: Do not allow subtracting more NFC credits than configured
thunderbolt: Runtime resume USB4 port when retimers are scanned
thunderbolt: Tear down existing tunnels when resuming from hibernate
thunderbolt: Runtime PM activate both ends of the device link
thunderbolt: xdomain: Avoid potential stack OOB read
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events
in 'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf top: Fix TUI exit screen refresh race condition
perf pmu: Fix alias events list
perf scripts python: intel-pt-events.py: Fix printing of switch events
perf script: Fix CPU filtering of a script's switch events
perf intel-pt: Fix parsing of VM time correlation arguments
perf expr: Fix return value of ids__new()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Better input validation for compat ioctls and a documentation bugfix
for 5.16"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Docs: Fixes link to I2C specification
i2c: validate user data in compat ioctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Use the proper CONFIG symbol in a preprocessor check.
* tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Use the proper name CONFIG_FW_LOADER
|
|
When the following command is executed several times, a coredump file is
generated.
$ timeout -k 9 5 perf top -e task-clock
*******
*******
*******
0.01% [kernel] [k] __do_softirq
0.01% libpthread-2.28.so [.] __pthread_mutex_lock
0.01% [kernel] [k] __ll_sc_atomic64_sub_return
double free or corruption (!prev) perf top --sort comm,dso
timeout: the monitored command dumped core
When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.
However SLsmg_reinit_smg() maybe be called by another thread.
SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.
SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.com
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: yaowenbin <yaowenbin1@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 0e0ae8742207c3b4 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:
# perf list
...
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
...
Notice how the events are listed twice.
The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".
Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.
Fixes: 0e0ae8742207c3b4 ("perf list: Display hybrid PMU events with cpu type")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Two small fixups for spaceball joystick driver and appletouch touchpad
driver"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: spaceball - fix parsing of movement data packets
Input: appletouch - initialize work before device registration
|
|
Hugh Dickins reported the following
My tmpfs swapping load (tweaked to use huge pages more heavily
than in real life) is far from being a realistic load: but it was
notably slowed down by your throttling mods in 5.16-rc, and this
patch makes it well again - thanks.
But: it very quickly hit NULL pointer until I changed that last
line to
if (first_pgdat)
consider_reclaim_throttle(first_pgdat, sc);
The likely issue is that huge pages are a major component of the test
workload. When this is the case, first_pgdat may never get set if
compaction is ready to continue due to this check
if (IS_ENABLED(CONFIG_COMPACTION) &&
sc->order > PAGE_ALLOC_COSTLY_ORDER &&
compaction_ready(zone, sc)) {
sc->compaction_ready = true;
continue;
}
If this was true for every zone in the zonelist, first_pgdat would never
get set resulting in a NULL pointer exception.
Link: https://lkml.kernel.org/r/20211209095453.GM3366@techsingularity.net
Fixes: 1b4e3f26f9f75 ("mm: vmscan: Reduce throttling due to a failure to make progress")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time. In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling. In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.
Commit 69392a403f49 ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit a19594ca4a8b
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse. Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.
To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback. If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly. Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.
Alexey's original case was the most straight forward
for i in {1..3}; do tail /dev/zero; done
On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.
Alexey's second test case added watching a youtube video while tail runs
10 times. On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches. With this
patch applies, the video plays similarly to 5.15.
[lkp@intel.com: Fix W=1 build warning]
Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de
Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv
Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/
Reported-and-tested-by: Alexey Avramov <hakavlad@inbox.lv>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Reported-and-tested-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 69392a403f49 ("mm/vmscan: throttle reclaim when no progress is being made")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc mm fixes from Andrew Morton:
"2 patches.
Subsystems affected by this patch series: mm (userfaultfd and damon)"
* akpm:
mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
userfaultfd/selftests: fix hugetlb area allocations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes, all in drivers. The lpfc one doesn't look exploitable,
but nasty things could happen in string operations if mybuf ends up
with an on stack unterminated string"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: vmw_pvscsi: Set residual data length conditionally
scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
|
|
DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').
Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed. This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written.
Link: https://lkml.kernel.org/r/20211229124029.23348-1-sj@kernel.org
Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh
or any environment where there are 'just enough' hugetlb pages will
always fail with:
testing events (fork, remap, remove):
ERROR: UFFDIO_COPY error: -12 (errno=12, line=616)
The ENOMEM error code implies there are not enough hugetlb pages.
However, there are free hugetlb pages but they are all reserved. There
is a basic problem with the way the test allocates hugetlb pages which
has existed since the test was originally written.
Due to the way 'cleanup' was done between different phases of the test,
this issue was masked until recently. The issue was uncovered by commit
8ba6e8640844 ("userfaultfd/selftests: reinitialize test context in each
test").
For the hugetlb test, src and dst areas are allocated as PRIVATE
mappings of a hugetlb file. This means that at mmap time, pages are
reserved for the src and dst areas. At the start of event testing (and
other tests) the src area is populated which results in allocation of
huge pages to fill the area and consumption of reserves associated with
the area. Then, a child is forked to fault in the dst area. Note that
the dst area was allocated in the parent and hence the parent owns the
reserves associated with the mapping. The child has normal access to
the dst area, but can not use the reserves created/owned by the parent.
Thus, if there are no other huge pages available allocation of a page
for the dst by the child will fail.
Fix by not creating reserves for the dst area. In this way the child
can use free (non-reserved) pages.
Also, MAP_PRIVATE of a file only makes sense if you are interested in
the contents of the file before making a COW copy. The test does not do
this. So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous
hugetlb mapping. There is no need to create a hugetlb file in the
non-shared case.
Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The link to the I2C specification is broken. Although
"https://www.nxp.com" hosts Rev 7 (2021) of this specification, it is
behind a login-wall. Thus, an additional link has been added (which
doesn't require a login) and the NXP official docs link has been
updated.
Signed-off-by: Deep Majumder <deep@fastmail.in>
[wsa: minor updates to text and commit message]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Wrong user data may cause warning in i2c_transfer(), ex: zero msgs.
Userspace should not be able to trigger warnings, so this patch adds
validation checks for user data in compact ioctl to prevent reported
warnings
Reported-and-tested-by: syzbot+e417648b303855b91d8a@syzkaller.appspotmail.com
Fixes: 7d5cb45655f2 ("i2c compat ioctls: move to ->compat_ioctl()")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The spaceball.c module was not properly parsing the movement reports
coming from the device. The code read axis data as signed 16-bit
little-endian values starting at offset 2.
In fact, axis data in Spaceball movement reports are signed 16-bit
big-endian values starting at offset 3. This was determined first by
visually inspecting the data packets, and later verified by consulting:
http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf
If this ever worked properly, it was in the time before Git...
Signed-off-by: Leo L. Schwab <ewhac@ewhac.org>
Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Syzbot has reported warning in __flush_work(). This warning is caused by
work->func == NULL, which means missing work initialization.
This may happen, since input_dev->close() calls
cancel_work_sync(&dev->work), but dev->work initalization happens _after_
input_register_device() call.
So this patch moves dev->work initialization before registering input
device
Fixes: 5a6eb676d3bc ("Input: appletouch - improve powersaving for Geyser3 devices")
Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull drm fixes from Dave Airlie:
"This is a bit bigger than I'd like, however it has two weeks of amdgpu
fixes in it, since they missed last week, which was very small.
The nouveau regression is probably the biggest fix in here, and it
needs to go into 5.15 as well, two i915 fixes, and then a scattering
of amdgpu fixes. The biggest fix in there is for a fencing NULL
pointer dereference, the rest are pretty minor.
For the misc team, I've pulled the two misc fixes manually since I'm
not sure what is happening at this time of year!
The amdgpu maintainers have the outstanding runpm regression to fix
still, they are just working through the last bits of it now.
Summary:
nouveau:
- fencing regression fix
i915:
- Fix possible uninitialized variable
- Fix composite fence seqno icrement on each fence creation
amdgpu:
- Fencing fix
- XGMI fix
- VCN regression fix
- IP discovery regression fixes
- Fix runpm documentation
- Suspend/resume fixes
- Yellow Carp display fixes
- MCLK power management fix
- dma-buf fix"
* tag 'drm-fixes-2021-12-31' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Fix USB4 null pointer dereference in update_psp_stream_config
drm/amd/display: Set optimize_pwr_state for DCN31
drm/amd/display: Send s0i2_rdy in stream_count == 0 optimization
drm/amd/display: Added power down for DCN10
drm/amd/display: fix B0 TMDS deepcolor no dislay issue
drm/amdgpu: no DC support for headless chips
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amdgpu: always reset the asic in suspend (v2)
drm/amd/pm: skip setting gfx cgpg in the s0ix suspend-resume
drm/i915: Increment composite fence seqno
drm/i915: Fix possible uninitialized variable in parallel extension
drm/amdgpu: fix runpm documentation
drm/nouveau: wait for the exclusive fence after the shared ones v2
drm/amdgpu: add support for IP discovery gc_info table v2
drm/amdgpu: When the VCN(1.0) block is suspended, powergating is explicitly enabled
drm/amd/pm: Fix xgmi link control on aldebaran
drm/amdgpu: introduce new amdgpu_fence object to indicate the job embedded fence
drm/amdgpu: fix dropped backing store handling in amdgpu_dma_buf_move_notify
|
|
into drm-fixes
This merges two fixes that haven't been sent to me yet, but I wanted to get in.
One amdgpu fix, but one nouveau regression fixer.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Make sure that finish_mount_kattr() is called after mount_kattr was
succesfully built in both the success and failure case to prevent
leaking any references we took when we built it. We returned early if
path lookup failed thereby risking to leak an additional reference we
took when building mount_kattr when an idmapped mount was requested.
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 9caccd41541a ("fs: introduce MOUNT_ATTR_IDMAP")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from.. Santa?
No regressions on our radar at this point. The igc problem fixed here
was the last one I was tracking but it was broken in previous
releases, anyway. Mostly driver fixes and a couple of largish SMC
fixes.
Current release - regressions:
- xsk: initialise xskb free_list_node, fixup for a -rc7 fix
Current release - new code bugs:
- mlx5: handful of minor fixes:
- use first online CPU instead of hard coded CPU
- fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
- fix skb memory leak when TC classifier action offloads are disabled
- fix memory leak with rules with internal OvS port
Previous releases - regressions:
- igc: do not enable crosstimestamping for i225-V models
Previous releases - always broken:
- udp: use datalen to cap ipv6 udp max gso segments
- fix use-after-free in tw_timer_handler due to early free of stats
- smc: fix kernel panic caused by race of smc_sock
- smc: don't send CDC/LLC message if link not ready, avoid timeouts
- sctp: use call_rcu to free endpoint, avoid UAF in sock diag
- bridge: mcast: add and enforce query interval minimum
- usb: pegasus: do not drop long Ethernet frames
- mlx5e: fix ICOSQ recovery flow for XSK
- nfc: uapi: use kernel size_t to fix user-space builds"
* tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
fsl/fman: Fix missing put_device() call in fman_port_probe
selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
Documentation: fix outdated interpretation of ip_no_pmtu_disc
net/ncsi: check for error return from call to nla_put_u32
net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
net: fix use-after-free in tw_timer_handler
selftests: net: Fix a typo in udpgro_fwd.sh
selftests/net: udpgso_bench_tx: fix dst ip argument
net: bridge: mcast: add and enforce startup query interval minimum
net: bridge: mcast: add and enforce query interval minimum
ipv6: raw: check passed optlen before reading
xsk: Initialise xskb free_list_node
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
ionic: Initialize the 'lif->dbid_inuse' bitmap
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
net/smc: fix kernel panic caused by race of smc_sock
net/smc: don't send CDC/LLC message if link not ready
NFC: st21nfca: Fix memory leak in device probe and remove
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are two misc driver fixes for 5.16-final:
- binder accounting fix to resolve reported problem
- nitro_enclaves fix for mmap assert warning output
Both of these have been for over a week with no reported issues"
* tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert
binder: fix async_free_space accounting for empty parcels
|
|
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.16 to resolve some reported
problems:
- mtu3 driver fixes
- typec ucsi driver fix
- xhci driver quirk added
- usb gadget f_fs fix for reported crash
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Only check the contract if there is a connection
xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.
usb: mtu3: set interval of FS intr and isoc endpoint
usb: mtu3: fix list_head check warning
usb: mtu3: add memory barrier before set GPD's HWO
usb: mtu3: fix interval value for intr and isoc
usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.
|
|
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the and error handling paths.
Fixes: 18a6c85fcc78 ("fsl/fman: Add FMan Port Support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
udpgro_fwd.sh output following message:
ping: 2001:db8:1::100: Address family for hostname not supported
Using ping6 when pinging IPv6 addresses.
Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The updating way of pmtu has changed, but documentation is still in the
old way. So this patch updates the interpretation of ip_no_pmtu_disc and
min_pmtu.
See commit 28d35bcdd3925 ("net: ipv4: don't let PMTU updates increase
route MTU")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use DECLARE_BITMAP() instead of hand writing it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a2bf604d26dbe9816fdaae0faf4b4837ecacc6d3.1640245180.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are no more users for the function.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223082432.45653-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of trying to keep track of the connections to the
USB Type-C connectors separately, letting the component
framework take care of that.
From now on every USB Type-C connector will register itself
as "aggregate" - component master - and anything that can be
connected to it inside the system can then simply register
itself as a generic component.
The matching of the components and the connector shall rely
on ACPI _PLD initially. Before registering itself as the
aggregate, the connector will find all other ACPI devices
that have matching _PLD crc hash with it (matching value in
the pld_crc member of struct acpi_device), and add a
component match entry for each one of them. Because only
ACPI is supported for now, the driver shall only be build
when ACPI is supported.
This removes the need for the custom API that the driver
exposed. The components and the connector can therefore
exist completely independently of each other. The order in
which they are registered, as well as are they modules or
not, is now irrelevant.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223082422.45637-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Creating link to the USB Type-C connector for every new port
that is added when possible.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223082349.45616-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Storing CRC-32 hash of the Physical Location of Device
object (_PLD) with devices that have it. The hash is stored
to a new struct acpi_device member "pld_crc".
The hash makes it easier to find devices that share a
location, as there is no need to evaluate the entire object
every time. Knowledge about devices that share a location
can be used in device drivers that need to know the
connections to other components inside a system. USB3 ports
will for example always share their location with a USB2
port.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223081620.45479-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
So we can use bus_for_each_dev() and others from modules.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223081620.45479-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
